HP 620 wireless problem. Help!

Similar Questions

• WAG320N wireless problems

  I am having major problems with my Linksys WAG320N. Hoping someone here can help as I am quite clueless when it comes to networking.

  Without changing the settings, the other day that my Macbook Pro could not connect and he kept saying 'timeout '. From that point my iPhone also refused to sign, although access to the internet on my MBP viaethernet was fine.

  I did a hard reset according to the instructions of this forum, and then re-configured with the installation CD. The router wireless light was turned on but my MBP did not see the network. Finally, I managed to connect after I restarted my laptop and enjoyed every 10 minutes without internet connectivity before wireless problem network come fall and now does not appear in my list of networks once again, even if the wireless light is still on.

  Ethernet connection still works, but not via the wireless.

  I restarted my laptop and the router and tried switching channels on the router, all to nothing done. Very confused and frustrated!

  Someone at - it suggestions? Thanks in advance for any help.

  What is the wireless settings you have set up on your router (SSID, channel and security mode)?

  Connect to your router configuration page and click on the Wireless tab and click on the "Advance Wireless Settings" sub-tab and under change 75 beacon interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now let's see if you can locate your wireless network and try to connect...

• T40 2374-PU3 wireless problems

  T40 2374-PU3 Wireless problems - I tried every driver and followed instructions to install several times.  I was able to install it successfully in the past (about a year), but do not remember with the version of the driver that I used.  Using WinXP SP2 - just installed.

  Help, please!

  Thank you!

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-42683

  After uploading, be sure to check out according to the instructions on the download page.

  I hope this helps.

• dell latitude e4300 wireless problem

  HELO I have dell latitude e4300, and when his power on his wifi is off, but after doing some work on my pc and make the pc to sleep and again in normal mode wifi starts to operate. kindly help me.

  Hello zitouni,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any recent hardware or software on your computer changes?

  Thank you for details on the issue.

  This problem can occur for the following reasons:

  -Wireless adapter switch is not activated.
  -WEP, WPA or WPA2 key or password security issues.
  -Cables are not connected properly.
  -Corrupted or incompatible wireless network drivers.
  -Missing updates.
  -Incorrect wireless network connection settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows wireless PROBLEM 8

  Hello

  My problem is that I can't use the network wireless for more then 15 min before the network became not identified, so I have to disable/impossible is the wifi adapter before I can use the network once again, the network 'Freewifi', I use an ACER Aspire 5742 G, enterprise windows 8, the wireless driver is "Qualcomm Atheros AR5B97 Wireless Network Adapter" I hope that this help you help me xD ,

  Thanks in advance

  Check this: http://windows.microsoft.com/en-US/windows/network-connection-problem-help

  This helped one of my friends who had the same problem.

• The payment change ADOBE info Web page fails - I can't scroll down to save the changes. My subscription is expired and I am dead in the water! I can't find a support customer portal to this problem - HELP PLEASE!

  I can't scroll down to save the changes. My subscription is expired and I am dead in the water! I can't find a support customer portal to this problem - HELP PLEASE!

  catsrock

  Great salvation,

  We are sorry for the inconvenience caused to you!

  I recommend you contact customer service regarding this issue.

  Kind regards

  Rahul

• S10 - 3T wireless problem

  My rig to receive yesterday and fought wireless problems.  Thought, he was my network for some time and found if I close the 3 t of the network works fine.

  The 3 t at this point works well on the network but sometimes slow.  However any TIME that I try to download a file, it works as usual for a while then just dies.

  Stop downloading and it is surfing.  It seems also to kill or slow down the network to a crawl at the same time.

  I tried to update the drivers in Device Manager and it says they are the best already.

  Any thoughts?

  Thank you for your understanding.

  The ends of the ongoing saga I think.

  I went to Burger King this morning and connected to their hot spot and the thing that worked great - downloaded a large file on site.

  Lenovo, I called and they told me to uninstall the software Lenovo 5 ready.  I did and rebooted and it worked fine and still seems to work very well ;-)  They said that it causes conflicts.

  Worked on my unit anyway.  This happens on a platform of Asus here one year, their uninstalled software and it worked fine.

• T400 problem with slow speed internet wireless. Help, please

  Hello

  Just got my new T400 (276581U) and I am very happy with it. However, he has a problem. I searched extensively in this area and other forums, but have not found the solution. So any input or help would be greatly appreciated.

  Problem:
  upload and download speed is very slow when connected to wireless broadband. Measures download speed 1 Mbit/s on www.speedtest.net, while two other computers (XP and Vista) reach speeds 6 Mbit/s on the same network wireless download.

  I tested the computer via LAN and here it downloads at normal speed of 6 Mbps.

  OS: Windows 7
  Network cards:
  Intel 82567LF Gigabit network connection (driver version: 10.1.6.0)
  Intel Wifi Link 5100 AGN (driver version: 13.0.0.107)

  I have download all the latest drivers on the Lenovo support site. The pilot Gigabit Network Connection, I downloaded however Intel, as there is no driver windows 7 on Lenovo website. The Intel driver has improved my connection to the local network (before that I could not download the full site content) and it has not changed my connection Wireless for the better or worse.

  Wireless configuration:
  Wireless g connected to the modem access point high speed
  So, to access internet, I need to connect twice, first the access point, and then click the modem to broadband. This configuration works on two other computers in the House. The lenovo is however not seem to recognize that I am online, even when I am. The symbol "not connected" is always displayed in the toolbar, and diagnostic tests tell me that I'm not online. That might relate to the problem.

  Thanks for reading this. I hope that some kind soul can help.

  pass under the power manager find advanced settings and then look for the Manager of the electric network... its value usually on the default energy savings

• Help to install the driver for HP 620 Wireless LAN Card?

  I need help to install the wireless network card. I can't access the internet on my main computer, but the error States:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  OS: Windows 7 Home Premium

  How was the problem: simply, I restarted my computer and wireless network card no longer works

  I need this laptop for work, so if someone could help me as soon as POSSIBLE, it would be grateful.

  Hello:

  Here is the link for the driver you need for the Ralink WiFi card in your laptop:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4158863&swItem=ob-102451-1&prodNameId=4158501&swEnvOID=4059&swLang=13&taskId=135&mode=4&idx=2

• (need help) wireless problem...

  Hello guys... I'm new here... OK, that's my problem, and I hope that you guys can help me...

  yesterday, I received a new computer laptop lenovo x100e, its happened with windows 7 starter... but now I have upgraded to windows 7 ultimate... the problem is, I can't access the network using wireless... my driver name is express 11 11 b/g/n wireless LAN Mini-pci adapter...

  I hope someone can help me...

  Thank you

  Fatou

  Here is the driver http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73701

• Since USB to printer wireless problem. Help!

  My computer is a windows xp from 2002.  Recently, I spent a WiFi modem with connection wi - fi and got everything hooked up okay, except for the HP printer will not print from the computer now.  I can only use the printer manually now.  It shows that it is connected wireless now, but I get an error when I try to print anything the computer off "work has not print due to an error in the printery system".  I ran the wizard wireless to the printer, but still nothing.  I'm not very good at that kind of stuff.  I need someone who knows what to do, cause I sure can't seem to solve this problem.

  You need to "install" your printer as a wireless printer.  The icon is now displayed in the printers and faxes is connected by USB installation.  After the wireless installation is finished, you can either leave the premiera or delete it.

  For your printer user's Guide should be on the CD supplied with the printer. It may have been copied to your computer when you did the initial installation.  If you don't, go here--> http://h10032.www1.hp.com/ctg/Manual/c01856408.pdf

  The User Guide of your Motorola cable modem (which includes a wireless router) is here--> http://tinyurl.com/bayh7wt

  I'm not sure from your description, but I think that you run the "Wireless Setup Wizard" using the controls on the front panel of the printer, as described on pages 62 and 63 of the printer User Guide.  Assuming that's what you were doing, you seem to have stopped before moving on to step 6... which is actually an entirely additional process which is described on page 66 of the use and copied below Guide.  When you perform this procedure, your computer must be connected to the cable modem, or with an Ethernet cable or its own wireless connection.

  To install the HP Photosmart of Windows software on a networked computer

  1. Quit all applications that are running on your computer.
  2. Insert the installation CD provided with the product in the CD-ROM drive on your
  computer and follow the instructions on the screen.
  NOTE: If the HP Photosmart camera is not connected to a network, run it wireless
  Setup Wizard in the network menu on the HP Photosmart camera. If during software
  installation, the software cannot find the product over the network or you were
  Unable to run the Wireless Setup Wizard, you will be prompted to
  temporarily to connect the unit to the computer via the USB setup cable
  install the HP Photosmart camera on your network. Do not connect the USB installation cable
  to the computer so that you are prompted.
  3. If an on the Firewall dialog box appears, follow the instructions. If you see a popup of firewall
  messages, you must always accept or allow the pop-up messages.
  4. on the connection Type screen, select an appropriate option, and then click Next.
  The search screen is displayed as Setup search the product on
  the network.
  5. in the printer screen detected, make sure the printer description is correct.
  If more than one printer is on the network, the printers found screen.
  Select the product that you want to connect.
  6. follow the prompts to install the software.
  When you have finished installing the software, the product is ready for use.
  7. to test your network connection, go to your computer and print a self-test report
  the product.

• help wireless problem!

  I have a hp compaq nx6125 laptop, I have re installed widows xp. I downloaded and installed all the drivers. the wireless button when pushed does not illuminate. When you press the hp wireless assistant appears and it show wlan disable or turn off. any ideas, I had the drivers off site Web hp

  No Wireless Assistant not offers the possibility to activate? A couple of things to check. Look in Device Manager to see what wireless status. Enter in BIOS to power to see if there's an option to turn on wireless.

• Connectivity with printer Epson wireless problems.

  Epson printer indicates that the wi - fi connection is excellent. The connection to devices also indicates that the signal strength is excellent. However, when I go to print it tells me that there is no wireless printer! This happens with the iMac, iPad and iPhone. This just started happening about 2 weeks ago.

  See if it works... In system preferences > printers and Scanners choose your printer and remove it from the list, and then add it back

  Get help to solve the problems of printer on your Mac - Apple Support

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes & infoType = FAQ & oid = 209708 & prodoid = 63095161 & foid = 230405

• HP LASER JET 4 P DO NOT PRINT WIRELESS LAPTOP, HELP

  BOTH OF MY COMPUTERS ARE DELL AND HAVE VISTA, THE WIRELESS IS AN AT %T MODEM. PRINTER IS CONNECTED BACK TO CALCULATE MAIN VIA A USB-PRINTER PORT WORKS WELL WITH THE BUREAU, WILL NOT WORK WITH THE WIRELESS - OF THE CLUES?

  AT & T AND DSL (BELL - SOUTH) ADVISED me, THAT it IS a PRINTER PROBLEM, I DOWNLOADED a POSSIBLE DRIVER to the laptop. WHAT I GET IS AN ERROR MESSAGE WITH THE LAPTOP.

  NEED HELP? ANY IDEAS? SUGGESTIONS?

  You can disable the caps. No need to yell. You try to share a printer on a network. It must be established as a shared resource on the computer where the printer is connected. Can you share files between the desktop and the laptop on the network?

  Did you all put here to share the printer between two computers?

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

• ZBook 14 wireless problem solved!

  For a few months now, my ZBook 14 (still under warranty) drivers wireless (Intel Wireless - N 7260 BN) were not loading at startup about 50% of the time.  Pilots would almost always successfully load if I restarted, but it was aggravating circumstances somehow.  I called HP Elite ZBook Technical Support and they walked me through several stages, including the uninstall and re - install the latest drivers, but nothing helped.  They arranged for a HP field Support Technician (FST) to install a new wireless card.  Personally, I thought it was a hardware problem, but that seemed to be their next step.

  So, today, their TSP arrived and quickly installed my new wireless card.  Well, it does not solve my problem, so she put the old card in and then began to make inquiries.  What she found is that even though my computer reported that he had the latest version of the BIOS installed, there is NO!  06/02/15, I allowed my computer to update to the latest version of the BIOS, which then was 01.30 (release date 09/12/14).  However, she discovered that a subsequent update of the BIOS (01.30 A) had been released only a week after the patch (dated 12/15/14) 01.30 in the desription of the BIOS update he said that it was precisely to add support for my card Intel Wireless-N 7260 BN

  Big CONGRATULATIONS to the girl TSPS for gap identification and the new installation of the BIOS update solved my wireless card problems!  I apparently never thought that because my computer reported that he had the latest version of the BIOS installed, and which does not recognize my "HP Support Assistant" software it was a newer BIOS available, either!

  Just for an update, even after my ZBook is update to the latest version of the BIOS (01.30 A), my "HP Support Assistant" software always reports that my version of BIOS is 01.30.  It of like the software recognizes numeric characters, but can not see the Alpha "A" character.  Just thought that info may help someone.  Proof that you can't ALWAYS trust your HP Support Assistant software...