help wireless problem!

Similar Questions

• (need help) wireless problem...

  Hello guys... I'm new here... OK, that's my problem, and I hope that you guys can help me...

  yesterday, I received a new computer laptop lenovo x100e, its happened with windows 7 starter... but now I have upgraded to windows 7 ultimate... the problem is, I can't access the network using wireless... my driver name is express 11 11 b/g/n wireless LAN Mini-pci adapter...

  I hope someone can help me...

  Thank you

  Fatou

  Here is the driver http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73701

• WAG320N wireless problems

  I am having major problems with my Linksys WAG320N. Hoping someone here can help as I am quite clueless when it comes to networking.

  Without changing the settings, the other day that my Macbook Pro could not connect and he kept saying 'timeout '. From that point my iPhone also refused to sign, although access to the internet on my MBP viaethernet was fine.

  I did a hard reset according to the instructions of this forum, and then re-configured with the installation CD. The router wireless light was turned on but my MBP did not see the network. Finally, I managed to connect after I restarted my laptop and enjoyed every 10 minutes without internet connectivity before wireless problem network come fall and now does not appear in my list of networks once again, even if the wireless light is still on.

  Ethernet connection still works, but not via the wireless.

  I restarted my laptop and the router and tried switching channels on the router, all to nothing done. Very confused and frustrated!

  Someone at - it suggestions? Thanks in advance for any help.

  What is the wireless settings you have set up on your router (SSID, channel and security mode)?

  Connect to your router configuration page and click on the Wireless tab and click on the "Advance Wireless Settings" sub-tab and under change 75 beacon interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now let's see if you can locate your wireless network and try to connect...

• T40 2374-PU3 wireless problems

  T40 2374-PU3 Wireless problems - I tried every driver and followed instructions to install several times.  I was able to install it successfully in the past (about a year), but do not remember with the version of the driver that I used.  Using WinXP SP2 - just installed.

  Help, please!

  Thank you!

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-42683

  After uploading, be sure to check out according to the instructions on the download page.

  I hope this helps.

• dell latitude e4300 wireless problem

  HELO I have dell latitude e4300, and when his power on his wifi is off, but after doing some work on my pc and make the pc to sleep and again in normal mode wifi starts to operate. kindly help me.

  Hello zitouni,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any recent hardware or software on your computer changes?

  Thank you for details on the issue.

  This problem can occur for the following reasons:

  -Wireless adapter switch is not activated.
  -WEP, WPA or WPA2 key or password security issues.
  -Cables are not connected properly.
  -Corrupted or incompatible wireless network drivers.
  -Missing updates.
  -Incorrect wireless network connection settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HP Pavilion TouchSmart 14n018-US Wireless problem! * PLEASE ANSWER AS SOON AS POSSIBLE *.

  Spoiler (Highlight to read)

  I have a problem with my HP Pavilion TouchSmart 14n018-US Wireless. Please read the information below:

  I have a problem with my HP Pavilion TouchSmart 14n018-US Wireless. Please read the information below:

  Hello

  I got a HP Pavilion TouchSmart 14n018-US recently of staples and it comes preinstalled with Windows 8. I don't like Windows 8 and jumps in a disc of Windows 7 Ultimate. As I expected, none of the drivers was about this and I had to use my office to burn the drivers on a dvd. I put each internet driver of HP on the topic of my computer went down them, in my Pavilion, but each has failed. whenever I tried to open the SAME if he had the support for windows 7, it would just shut down unexpected that have not installed the drivers at all. I even tried several websites for the correct driver, but I get nothing. Please help with my problem I need my laptop for work on Monday.

  Thank you.

  _____________________________________________________________________________________________________

  Please leave a "Bravo" if I helped your problem!

  My first computer was a Compaq Presario CQ57.

  Hello Sean2,

  I understand that you have downgraded your operating system Windows 8 for Windows 7 and are unable to find the drivers for your computer. I watch, I am sure that you have done so and there is no driver is listed for your computer running Windows 7. This does not mean that you can't find just that they will be more difficult to locate.

  What to display the devices Windows 7 hardware ID not properly settled for you. With the hardware ID, we can attempt to locate the drivers for this particular device running Windows 7. Here is a link to a site explaining How to find Hardware ID.

  Please respond with the required information. Thanks for posting your question on the Forums of HP. Have a great day!

• Card memory blackBerry Smartphones can help with problem memory curve?

  I had (apparently common on this forum) problems with memory on my blackberry curve 8310.  I use Missing Sync MarkSpace software to synchronize with my macbook.  The software works very well, but he has to use too much memory.  I added a memory card hoping that it would help this problem... but the map does not appear to be used.  I have no more than two or three rings and a few photos.  I think that the software and my contacts/calendar to take up space.  I can't load this kind of applications or data on the card?  How? Is it possible to increase the memory that works?

  No, you cannot load or run the press card applications.

  What you can do:

  Read this: http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...

  And this: http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...

  Other links to read:
  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15345&sliceId=SAL_Pub...
  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB14320&sliceId=SAL_Pub...
  http://www.BlackBerry.com/BTSC/dynamickc.do?externalId=KB14213&sliceId=SAL_Public&command=show&forwa...

• S10 - 3T wireless problem

  My rig to receive yesterday and fought wireless problems.  Thought, he was my network for some time and found if I close the 3 t of the network works fine.

  The 3 t at this point works well on the network but sometimes slow.  However any TIME that I try to download a file, it works as usual for a while then just dies.

  Stop downloading and it is surfing.  It seems also to kill or slow down the network to a crawl at the same time.

  I tried to update the drivers in Device Manager and it says they are the best already.

  Any thoughts?

  Thank you for your understanding.

  The ends of the ongoing saga I think.

  I went to Burger King this morning and connected to their hot spot and the thing that worked great - downloaded a large file on site.

  Lenovo, I called and they told me to uninstall the software Lenovo 5 ready.  I did and rebooted and it worked fine and still seems to work very well ;-)  They said that it causes conflicts.

  Worked on my unit anyway.  This happens on a platform of Asus here one year, their uninstalled software and it worked fine.

• x220t - help wireless adapter

  I just bought a x 220 tablet on the lenovo Web site. I missed a linux installation and was forced to reinstall windows 7.  After installing windows 7 again, the wireless doesn't work anymore, even though I installed the drivers from the lenovo site. When I look in the hardware Manager, it says the device network controller driver is not installed, which I assume is related to the wireless problem. EVeRyThiN g remains on the laptop works very well, even the wired network card.

  All I have this problem, or can point me in the right direction?

  Thank you.

  John

  I solved the problem. Apparently the installer does not completely install the wireless card. After Setup is finished, you will have to go to the network controller is not installed in the hardware Manager and that it points to the directory where the installer put the files.

• Since USB to printer wireless problem. Help!

  My computer is a windows xp from 2002.  Recently, I spent a WiFi modem with connection wi - fi and got everything hooked up okay, except for the HP printer will not print from the computer now.  I can only use the printer manually now.  It shows that it is connected wireless now, but I get an error when I try to print anything the computer off "work has not print due to an error in the printery system".  I ran the wizard wireless to the printer, but still nothing.  I'm not very good at that kind of stuff.  I need someone who knows what to do, cause I sure can't seem to solve this problem.

  You need to "install" your printer as a wireless printer.  The icon is now displayed in the printers and faxes is connected by USB installation.  After the wireless installation is finished, you can either leave the premiera or delete it.

  For your printer user's Guide should be on the CD supplied with the printer. It may have been copied to your computer when you did the initial installation.  If you don't, go here--> http://h10032.www1.hp.com/ctg/Manual/c01856408.pdf

  The User Guide of your Motorola cable modem (which includes a wireless router) is here--> http://tinyurl.com/bayh7wt

  I'm not sure from your description, but I think that you run the "Wireless Setup Wizard" using the controls on the front panel of the printer, as described on pages 62 and 63 of the printer User Guide.  Assuming that's what you were doing, you seem to have stopped before moving on to step 6... which is actually an entirely additional process which is described on page 66 of the use and copied below Guide.  When you perform this procedure, your computer must be connected to the cable modem, or with an Ethernet cable or its own wireless connection.

  To install the HP Photosmart of Windows software on a networked computer

  1. Quit all applications that are running on your computer.
  2. Insert the installation CD provided with the product in the CD-ROM drive on your
  computer and follow the instructions on the screen.
  NOTE: If the HP Photosmart camera is not connected to a network, run it wireless
  Setup Wizard in the network menu on the HP Photosmart camera. If during software
  installation, the software cannot find the product over the network or you were
  Unable to run the Wireless Setup Wizard, you will be prompted to
  temporarily to connect the unit to the computer via the USB setup cable
  install the HP Photosmart camera on your network. Do not connect the USB installation cable
  to the computer so that you are prompted.
  3. If an on the Firewall dialog box appears, follow the instructions. If you see a popup of firewall
  messages, you must always accept or allow the pop-up messages.
  4. on the connection Type screen, select an appropriate option, and then click Next.
  The search screen is displayed as Setup search the product on
  the network.
  5. in the printer screen detected, make sure the printer description is correct.
  If more than one printer is on the network, the printers found screen.
  Select the product that you want to connect.
  6. follow the prompts to install the software.
  When you have finished installing the software, the product is ready for use.
  7. to test your network connection, go to your computer and print a self-test report
  the product.

• Help - Major problems wireless with an all new S10 - slow

  Hello

  I just got a new black S10, upgraded the RAM to a Kingston 2 GB module. The start is very good.

  The headache I have now is that the wireless connection is extremely slow and it takes forever to renew the INVESTIGATION period. I downloaded the drivers lenovo again and the wifi connection is 10 X slower than the other Mac and PC I have around the House. Even an old EEEPC 701 has the best reliability of the Wi - Fi than the S10.

  The only thing I did with the new machine was to uninstall Norton and Adobe... Nothing else.

  You hit on the dollar. It's the speed of the Ram have now standardized. Hey can start us a thread on the types of RAM supported for the S10. I just lost $$$ on the Kingstons. At least I can use on an EEE PC tem...

  Thanx

• HP 620 wireless problem. Help!

  
  

  Bojan says:

  OS Win vista Home 32 profesional x

• Connectivity with printer Epson wireless problems.

  Epson printer indicates that the wi - fi connection is excellent. The connection to devices also indicates that the signal strength is excellent. However, when I go to print it tells me that there is no wireless printer! This happens with the iMac, iPad and iPhone. This just started happening about 2 weeks ago.

  See if it works... In system preferences > printers and Scanners choose your printer and remove it from the list, and then add it back

  Get help to solve the problems of printer on your Mac - Apple Support

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes & infoType = FAQ & oid = 209708 & prodoid = 63095161 & foid = 230405

• ZBook 14 wireless problem solved!

  For a few months now, my ZBook 14 (still under warranty) drivers wireless (Intel Wireless - N 7260 BN) were not loading at startup about 50% of the time.  Pilots would almost always successfully load if I restarted, but it was aggravating circumstances somehow.  I called HP Elite ZBook Technical Support and they walked me through several stages, including the uninstall and re - install the latest drivers, but nothing helped.  They arranged for a HP field Support Technician (FST) to install a new wireless card.  Personally, I thought it was a hardware problem, but that seemed to be their next step.

  So, today, their TSP arrived and quickly installed my new wireless card.  Well, it does not solve my problem, so she put the old card in and then began to make inquiries.  What she found is that even though my computer reported that he had the latest version of the BIOS installed, there is NO!  06/02/15, I allowed my computer to update to the latest version of the BIOS, which then was 01.30 (release date 09/12/14).  However, she discovered that a subsequent update of the BIOS (01.30 A) had been released only a week after the patch (dated 12/15/14) 01.30 in the desription of the BIOS update he said that it was precisely to add support for my card Intel Wireless-N 7260 BN

  Big CONGRATULATIONS to the girl TSPS for gap identification and the new installation of the BIOS update solved my wireless card problems!  I apparently never thought that because my computer reported that he had the latest version of the BIOS installed, and which does not recognize my "HP Support Assistant" software it was a newer BIOS available, either!

  Just for an update, even after my ZBook is update to the latest version of the BIOS (01.30 A), my "HP Support Assistant" software always reports that my version of BIOS is 01.30.  It of like the software recognizes numeric characters, but can not see the Alpha "A" character.  Just thought that info may help someone.  Proof that you can't ALWAYS trust your HP Support Assistant software...

• Laptop HP 650 - network wireless problem

  Hello

  I have a laptop HP 650

  I installed windows 7 x 64 sp1

  I downloaded all the drivers for the HP product page

  I installed all the drivers, but I have a problem with the driver for the wireless network.

  All drivers works fine, except wireless driver.

  What can I do?

  That you help me with some advice?

  Thank you!!

  Best regards

  REMUS

  You are the very welcome.

  Here is the link for the driver you need:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 0 & prodSeriesId = 5229455 & prodNameId = 5229457 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-118499-1

  He was not on the support page and the driver of your laptop.