HP 6830: driver for hp 6830 and windows8.1

Similar Questions

• Satellite 1000-Z2: I need a driver for the display and the LAN

  Hello

  I reformatted my laptop S1000-Z2, and I have a real problem trying to find all the information about this model!

  Basically, I need a driver for the display and the LAN?

  Best regards

  Austin.

  What operating system do you use?
  If you use XP, you will not find the network on the site recommended driver driver!
  I can't give you advice where to find such driver because I don t know what the LAN card is installed in your oldie.

  But why you n t check yourself? Try to know what the LAN card you use and googel a bit for compatible applications ;)

• I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. V5.9.1

  I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. The HP utility is v5.9.1, Mac OS x 10.7. I did the software update and a new driver HP was part of the package. HP ePrint still works, and print tests are okay for General network settings are intact. None of the applications that use the print dialogue box standard and local networking make it through the print queue. Any tips? Any way to roll back a driver version? Or quickly get the next revision and hope printing works again? Thank you.

  Update: OSX-specific Version is 10.7.5, model of the printer is HP OfficeJet 8600. See you soon.

  Hello

  Try to reboot the router and check if that can help you.

  After connecting the back of the router, wait 30-60 seconds and restart the printer and Mac.

  If it persists, try resettign the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now reconfigure the device by following the HP (under Utilities Applications\hewlett-Packard\Device) installation wizard.

  Please let me know if this can help,

  Shlomi

• I need a driver for Windows 7 and HP Designjet 430___Thank printer you

  I need a driver for Windows 7 and a HP Designjet 430

  I found the site of technical support drivers for 3 other models of HP printers

• I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  Hello

  You can use the Windows 8 Compatibility Center to find out if a device is compatible.

  Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
  http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/home

  FAQ - Windows Compatibility Center:

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ

  Concerning

• Need driver for WXP audio and video for Satellite C605

  I need driver for Nvidia Geforce for Windows Xp or alternative video driver and sound driver.

  Thank you very much.

  Hi vaballai,

  C605 satellite does not for me and I didn't found on Toshiba European driver download page. So I did a Google search and it seems that it s an American model and all the drivers can be downloaded here:
  http://www.CSD.Toshiba.com

  I hope that it helps :)

• HP 15-ac025tx: Please help to find the right driver for Wi - Fi and Bluetooth

  HP 15-ac025tx

  MODEL: M9V00PA #ACJ

  OS: Windows 7 (64-bit)

  Hello

  Would you be able to help with the link to the drivers for my laptop model mentioned above.

  1 WiFi

  2 Bluetooth

  3. the screen

  These are the elements located in the exclamation point (!) in the Windows Device Manager:

  -Graphics cards

  AMD Radeon (TM) R5 M330

  -Other devices

  BCM43142A0

  Network controller

  Acquisition of ICP data and Signal Processing controller

  Unknown device

  Many thanks in advance,

  Anish

  New Delhi

  Hello:

  You need these drivers for the wireless and bluetooth...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_145419_1 & swEnvOid = 4058

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_154511_1

  Graphics card: first install the Intel driver and restart.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72651.exe

  Then, install the graphics driver amd and restart.

  This package provides the graphics driver AMD/Intel switchable high definition (HD) for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance.

  File name: sp71254.exe

  Acquisition of ICP data and Signal Processing controller:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71262.exe

  Unknown device is probably in need of this driver...

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• Need driver for 'Network controller' and "Controller of Bus SM" in windows XP

  I just installed windows XP SP3 32-bit business for my laptop Presario c720tu. And I can't find the driver "Network controller" and "SM Bus controller". Help, please. Thank you very much.

  Hello

  Compaq Presario C720TU Notebook PC comes with Intel ICH8 chipset. System would be able to detect SM Bus controller drivers by installing the chipset of the motherboard drivers. You can find the chipset drivers on the site of the manufacturer in general.

  You can try this driver for Intel chipset:
  http://downloadmirror.Intel.com/16026/A08/INFINST_AUTOL.zip

  Hope this information helps.

  Kind regards
  Vidya

• Tried to install the driver for the Cam, and he said that he could not? Installed something, but I don't see it installed?

  Tonight I tried to install a driver for the Cam ti and he could not. Instead, he made somewhere, but I can't. And it does not appear as a program installed or peripheral? The driver I have is a Driver USB PC Camera. REV:168 H. For Windows 98.

  Hello

  1. you receive an error message on the computer?
  2. What is the brand and model of the Webcam then?

  Perform a clean boot and then try to update the driver compatible with vista on the manufacturer's Web site.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.
  Check out the link to update the drivers.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• can't get the driver for pci device and sm bus controller

  I have a hp laptop pavilion g6-2101tx. I recently installed the 64-bit windows 7 and I do not know what is the driver to install for pci device and sm bus controller.

  The Id of your drivers are as follows

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1840103C & REV_01

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1840103C & REV_04

  Please suggest me that I have to download the driver...

  Please do help me...

  Hello:

  Here are links to the drivers you need.

  Install the driver first chipset (which in the future, you must install before installing any other driver).

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103010-1&CC=US&DLC=en&LC=en&os=4063&Product=5269654&sw_lang=

  Then this driver will install the card reader.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102497-1&CC=US&DLC=en&LC=en&os=4063&Product=5269654&sw_lang=

• Satellite U300-153 WXP need driver for sound cards and video

  Hi all

  Is anyone know all the drivers for my video and audio drivers ' Satellite U300-153 (PSU30E-099017AR) "?

  I bought my laptop in UAE UNITED with MS Vista Basic Operating. My system is on all fours, then, I changed it with my
  Windows XP SP2 - SATA, but the sound and video card I downloaded available site Web from Toshiba is not
  works fine in my notebook, showing 'PCI system unit' doesn't work does not correctly, affecting my sound "do."
  map does not"and the video is"128 mb"only its shared.

  I don't like Vista, I only want to operate quickly.

  Waiting for your response.

  Thank you in advance.

  Kind regards
  ARNOBIE

  Hello

  Try the XP drivers Toshiba site. :)

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp#

• Want 5530: Installation of printer driver for want 5530 and Windows 10

  HP Envy 5530 worked well on Windows 8. I upgraded me automatically to Windows 10 and now the printer does not work. I tried to download the update from HP for Windows 10 and followed the program of troubleshooting provided by HP, but without success. I read comments that suggest that it is not possible to a 5530 want a PC to the network operating Windows 10. Certainly, this cannot be correct. Advice please.

  Hello @GBeastall,

  This is a great place to visit for a community support and HP! I see that the printer does not work since the upgrade of Windows 10. I wish I could help you.

  In the printers and devices window, check which shows the name of the printer and if it is set as the default printer.

  Print a configuration page to obtain the IPv4 of the printer address: print a Network Configuration Page.

  • Check the port assigned to the printer on the computer to see if it matches the IP address of the Configuration page.
  • In devices and printers, click right on the printer and on the left, click on printer properties, select the Ports tab.
  • It must be checked on the TCP/IP protocol.
  • Click on Configure Port to display the IP address.

  If the IP address does not, via the HP software, add a new device.

  1. Click on the Start button () or the lower left corner of the screen, then clickSearch.

  2. In the search box, type HP, and then click the icon for your printer. The software of the printer opens.

  3. Click utilities, and then click on the software & selection of the printer.

  4. Click on connect a new printer.

  Test the printer.

  Please try the steps outlined in this document, if you still have any questions: after 10 upgrade Windows, printer problems appear.

  Let me know the results of printing and scanning doctor.

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• HP Envy laptop M9X67AV: need driver for Laserjet 1100 and win 10

  I could not find a driver for the Laserjet 1100 printer that runs on a Windows 10 Pro platform. Can someone point me in the right direction?

  TIA,

  Mitch

  Hello @Mitch8

  Available for the printer software can be found here

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=61179&lang=en&cc=us

  There are different versions for your printer, you can select from here

  http://support.HP.com/us-en/drivers/selfservice/identify?q=LaserJet+1100&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  I don't mean that the printer sound out of support for some time already, which means that it probably won't software created for this printer for a while bac k

• Need driver for network controller and universal serial (USB) Bus controller

  Hello

  I'm using Windows 7 Ultimate 64 bit on my laptop HP 240 G3

  I can't find the drivers for the following

  1. network controller

  Hardware ID

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
  PCI\VEN_1814 & DEV_3290 & CC_028000
  PCI\VEN_1814 & DEV_3290 & CC_0280

  2. universal Serial Bus (USB) controller

  Hardware ID

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_220D103C & REV_04
  PCI\VEN_8086 & DEV_9C31 & SUBSYS_220D103C
  PCI\VEN_8086 & DEV_9C31 & CC_0C0330
  PCI\VEN_8086 & DEV_9C31 & CC_0C03

  Please help me to get the driver for above mentioned devices.

  Thanks in advance.

  Kind regards

  Karani

  Hello:

  You need these drivers...

  USB:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6431919&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_132256_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Wireless:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6431919&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_131223_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Qosmio X 300-126 - driver for FN keys and card reader

  Hi guys,.

  I have improved my Qosmio X 300-126 to win 7 and installed all the drivers (from the toshiba site) and updated my bios and the optical drive (dvd drive) and the thing is that

  Flash cards only works with the mouse and no keyboard shortcut! as the FN key is dead but worked fine in vista.
  And the other problem is that the reader of card don t work, which I think is the "unknown device" that I have in the Panel and devices don't know how to fix this problem.

  Help, please.

  Hello

  > Flash cards only works with the mouse and no keyboard shortcut! as the FN key is dead but worked fine in vista.
  I had the same problem after upgrade to windows 7, but the solution is pretty easy: just install the latest Toshiba Value added Package and Support Utility for Windows 7 Flash cards. If it s is not no for Windows 7 on X 300, just search by Satellite L500 and download them it worked for me! :)

  > And the other problem is that the reader of card don t work, which I think is the "unknown device" that I have in the Panel and devices don't know how to fix this problem.
  You need to download card reader driver. You can find it on the Toshiba site too. :)