HP 7515 constantly disconnects, does not automatically restore to wifi

Similar Questions

• System Restore create not automatic restore points

  I recently posted a related problem, which has been repaired/fixed, see http://h30434.www3.hp.com/t5/Operating-systems-and-software/System-Restore-does-not-retain-restore-p...

  My HP Pavilion DV6 is not creating Automatic restore points.  Laptop is ~ 3 months and is using Windows 7.   In my previous post, I had trouble with the restore points disappear.  This problem has been fixed when I corrected a number of bad sectors on my hard drive. Now, I can manually create restore points and they remain intact.  Manual of several points have been in place for a few weeks.  However, I don't get the automatic restore points.  I checked the Task Scheduler, it has listed the restoration of the system, the Task Scheduler Service is started and set to automatic.  I put triggers restore to create a restore point 02:00 every day and start the system.  Whenever I have check the properties of SR within the Task Scheduler window, it lists today and said that "the operation completed successfully (0x0).  However, no restore point is created.  I can't find any errors listed in the event where the viewer associated with the restoration of the system, kind of most prospects, it seems that the Restore Points should be created, but there is no list but the manual I did myself. I've set the conditions of restoration as follows: 1) start the task only if the computer is idle for 10 minutes. (2) wait for idle for 10 minutes. (3) wake the computer to run the task.  System Restore has 15% of disk space for storing points, so there is plenty of room.  Interestingly, on the properties of SR tab listed 'History', says ' story (disabled), so there is nothing listed there.»

  I must be missing something - any ideas?

  Last updated: the scenario and the procedure of johngalt I linked above works like a charm.  I'm daily Restore Points just like I want.  In the cases where I decide I want to only a couple of a week, I can easily change the new task at the request I created, so I don't plan to post further.   Question is resolved :-)  Thanks for the help!

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• How can I manually add a site to my new tab since suggestions does not automatically include it?

  How can I manually add a site to my new tab since suggestions does not automatically include it?

  Hi MichaelNicholas, you can add a site - pin in the new page by dragging out of your bookmarks or history...

• Satellite L500-208 does not automatically go to power saving mode

  Dear guys,

  I have a Satellite L500-208 (Serial: PSLS9E) with pre installed Windows 7 64-bit.
  For some time, the laptop does not automatically energy saving mode (as configured in the Power Options).

  Automatic change "Energy saving" worked some time ago and all of a sudden, it stopped.
  However, I do not remember what changed and probably caused the problem.

  Everything works fine and a manual of hitting on "Energy Save Button" also works very well...

  Before you guys suggest an update of the BIOS, the BIOS is version 1.60.
  Current version is 1.90 (or same 2.00?).
  Well, I missed an update and from the Toshiba Web space seems to be very rare, they offer only the latest version of the BIOS.

  Can someone points me to older versions of BIOS, or any that may give a clue to the strange behavior power?

  Kind regards
  Frank

  Hello

  Maybe there's something wrong with the Eco utility.
  I recommend reinstall this tool.
  On the European driver Toshiba page, you will find this tool.
  After the new installation, please check the settings provided by the Eco utility.
  Eventually, you will need to activate the energy saving mode automatic

  Good luck

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• After upgrade to El Capitan Time Machine does not automatically

  Recently, I upgraded my Macbook Pro and iMac 24 to El Capitan.  Time Machine does not automatically work on the iMac.   I now use the backup to get a backup to run.  MacBook Pro is very well.

  Thinking that this might be the associated time Capsule, I removed the disc from the Capsule and ran Spinrite on it.  Car is very good.  Then I deleted all the files on the Time Capsule and created new Time machine backups on two computers.  No problem, except the iMac not run automatically Time machine.

  And yes the selection for Time Machine is configured to run automatically.

  A bug in OS X 10.11.1 prevents automatic backups that happens when a desktop Mac (iMac, Mac mini or Mac Pro) is connected to a UPS (UPS) with the USB feature.

  Please, back up all data before proceeding.

  First, check the App Store for a later update to OS X. If it is available when you read this review, install it and see if the problem is resolved. I speak not beta versions.

  Otherwise, you can work around the bug as follows.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please triple - click anywhere in the line below on this page to select:

  sudo defaults write /Library/Preferences/com.apple.TimeMachine RequiresACPower 0

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal.

  Restart the computer and test.

  (Credit for this solution for chrfr of logicielmac.com).

• information store service Exchange starts does not automatically

  information store service Exchange starts does not automatically

  Post in the Forums of Exchange Server:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• MS Money 2005 - I rebooted the software, but it does not automatically download the update needed to read my existing data files

  Due to a hard drive crash, I had to reformat my hard drive,
  therefore lost my copy previous update of MS Money.
  I reloaded the software from the CD, but it does not automatically download the update needed to read my existing data files.
  Can someone help me read my old data files?

  Microsoft or anyone have made available as a patch to download?

  Hi Derek,.

  Since the problem is related to Microsoft Money, I suggest you post your question on the Forums of money from Microsoft.

  Microsoft Money Forum

• My Windows Media Player does not automatically recognize when a disc is placed in the disc drive.

  My windows media player does not automatically recognize when a disc is placed in the disc drive. I have to put the disc in the disc drive, and then close windows media player, with the disc in the disc drive already, then re-open windows media player. Reopened WMP with the disc in the disc drive, it recognizes the disc in the drive. It then functions well until I need to change the disk at this time I have to start the reboot stop of WMP. This problem has not allways exists just started a few months ago. Thanks for any helpful information.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  In addition,

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

• LL780 - Media does not automatically starting from tray 2

  I have a L7780 using Vista, XP and MAC OS. When Tray 1 is empty, the printer does not automatically draw/pull out tray 2. I get a condition "on paper." I have reset the printer to set up factory and have re-installed the latest drivers from the computer. This feature is published on page 40 of the operating manual. According to HP, this feature does not exist, however, I find that hard to believe since the manual stipulates that to this and I think at one time my printer did move to tray 2 when Tray 1 is empty. I use the LL780 in a network environment with multiple computers. The driver and the latest firmware is installed. I find the following link that deals with a "condition of paper output. I tried all the suggestions and it still does not work. I use plain white paper for all trays.

  http://support.HP.com/us-en/document/c00786157

  My first quesiton is, if somebody has got the LL7780 to automatically select tray 2 when Tray 1 is empty?

  Second, if so, it only worked when Tray 1 is empty at first or did the printer run out all the paper on tray 1 and then automatically move to tray 2.

  Thank you!

  HP released an update of firmware for this particular issue.

  Click here

• TB does not automatically download new messages email periodically even if "download automatically" is checked and set to 10 minutes

  TB does not automatically download new messages email periodically even if "download automatically" is checked and set to 10 minutes. Photo of the account server settings is attached.

  (For reference: it's POP, IMAP settings not.)

  Click the Advanced button under the settings above in the section "Message Storage" and review the when downloading mail on the server for this account, use the following folder to store new messages: settings.

  -Is selected Inbox for this account , and the record really / still exist? -If the second option (Inbox for the other account) is selected, make sure that the path is valid and that the box include this server when getting new messages is checked.

• How to load programs from a CD which does not automatically load

  I am new to windows 7. I want to load a program from a CD. It was easy with the Control Panel Add and deleate one program; or the execution of the order. Now, I don't know how to load a program from a CD which does not automatically load. Help!

  How can I install software on a disk?

  1. Insert the CD/DVD
  2. If the CD is not automatic open start Windows Explorer - click on start, then click computer.
  3. in the Windows Explorer window, open the drive that contains the installation files. For example, if they are on a CD or DVD open that drive or the letter of the disk drive.
  4. in the disk that contains your files, look for either a configuration or installation of the file. Double-click on this file should launch the installation of the program, a game or utility. If you see more than one configuration or install files, try to locate the file for the Application, double-click each setting or install files until you find the file that starts the installation.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Creative cloud does not automatically start more

  My creative cloud application does not automatically start more. It worked fine for a year and a half.
  But although the box in preferences to start automatically is checked that it does not automatically start more.
  It does not appear in the system tray I must maualy double click the CC (which i put my office op) to start.

  I also had a solution ad put a CC shortcut in the windows startup plan but he strangely disappears each time.

  After I dubble click on the strats of application up normally and everything works fine, so no problems with programs or the application of cc
  It was simply not possible box Autostart to highest upward. I use windows 8.1

  Unfortunately this did not help either. What I did then, I unchecked the box run at startup and put a shortcut in the Windows startup folder. Since then, (3 days ago), he continues to work. Hope it stays like that.