HP 8-1401

Similar Questions

• Wifi problem 1401 4.2.2 Hp8

  I use wifi on all my products as it is to other domestic users (where we have the same Tablet) to the same router and all is well.

  However my tablet will connect for a short period of time and then fall. When I try to reconnect, it is not, then sometimes says out of range.

  I tried refreshing and even a reset to factory, but in vain. Please advise on something else I can do. Would be - this the

  antenna internal? Is this a warranty issue?

  Hey @Mitzee ,

  Welcome to the HP Forums!

  I understand that the Wi - Fi on your HP 8 1401 Tablet connection is intermittent.

  If you have already performed a factory reset and the problem persists, I suggest to try the tablet on another network. I don't understand that other devices work on the same network but network is not quite as simple as that. All devices (even if it is exactly the same product) communicates with the router differently and independently.

  If the problems persist on a wireless network, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.

  Thank you!

• How to connect a keyboard to a 8-1401 HP Tablet?

  I wonder how I could connect a keyboard to my HP 1401 8 tablet.

  I bought a wireless (bluetooth) (mark Anker) keyboard, but then I realized that I obviously do not have compatible Bluetooth on the tablet. Is it possible to use a bluetooth dongle adapter (if so, which?) to my Tablet compatible bluetooth, so that it works with the keyboard, I've already bought? Or is there a workaround using WIFI to connect the wireless keyboard? (If so, how?)

  If not, what do I need connect a wired keyboard? I think a USB OTG cable that fits the micro-USB port to a classical USB port? And any particular type of keyboard should I consider for my HP 1401 8 Tablet?

  Thank you!

  (The love of my printer HP Officejet Pro, but I'm not finding HP technical support for tablets very... existing.) Tried three times for 'cat', and every time I have waited more than 15 minutes AFTER the display shows that I got an estimate '1 minute' to wait for a technician. What is happening with this? Is this typical or did I hit it on a bad day?)

  Hello and welcome to the HP support community!

  There is a message at the top of this section on the ability of the OTG.  HP 8 1401 is listed as able to withstand a keyboard via OTG, but a BlueTooth dongle is questionable...

  OTG Support Post.

  HP support for OTG was very hit & miss throughout their whole Tablet line, with more accuracy than hits.  If I were in your situation, I would seriously consider acquiring a tablet which had integrated BlueTooth if you want to use a BlueTooth keyboard!

  Adding a keyboard of version OTG would work - maybe you can return the keyboard Anker.

  (I type this reply with a slate of 10 HD & a former Palm BlueTooth Folding Keyboard keyboard!)

  WyreNut

• PSC 1401 all-in-One: printer memory storage

  This printer model has storage of printed or scanned documents. If I junk the printer should I worry about a "hard drive" or memory chip inside this nature retains the images? Thank you

  Hey @Tom86,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you are looking to recycle your printer PSC 1401 and wonder if there are components of memory that could be retained information. I can answer this question and let you know that this printer, like most of the models, is unable to store documents.  You can recycle the printer with no problems.

  If this has answered your questions, please let know clicking on accept as Solution on my post.

  If you enjoy my support, please click the icon below my post thumbs up.

• OTA update HP 8 1401 failed: E: could not mount/cache (invalid argument)

  I made an attempt of using OTA upgrade to the latest version of the firmware from HP 8 1401 (2014-07-22, Version2.0.4, 452.51 M)

  the update seems to have failed (don't know why)

  The tablet can not enter in recovery mode more (power + volume up) and product of n several times messages below:

  E: failed to mount/cache (invalid argument)
  E: failed to set up the media planned to install; abandonment
  installation abandoned
  E: failed to mount/cache (invalid argument)
  E:cant mount/cache/recovery/log
  E:cant open the recovery log / / cache /
  E: failed to mount/cache (invalid argument)
  E:cant mount/cache/recovery/last_log

  ....

  What can we do to solved this problem?

  I have no any attempt to root or break this system. just skip to the last available OS.

  T.

  Supported by contacted HP and they chose the Tablet for repairs.

• MX472 does not recognize the new ink cartridges 1401 code

  I recently had to replace my cartridges on my MX472 and immediately after the installation, I got a code on the LCD of the 1401 and several beeps. This code means ink not installed. Therefore, I cleaned the contact strips with alcohol, did a hard reset hold the stop button for 5 seconds, another type of reset hold the button stop for 2 seconds, then press and hold the power button by pressing the key stop 5 times. I also unplugged the printer for 5 minutes with the cartridges from the printer and plugged, reinstall the cartridges and still not received the error code 1401 Check ink back. I went and bought another set of authentic Canon ink thinking that the first set was defective and still a no go on the second set. My printer is ready for the garbage? Its only 6 months!  Someone at - it other thoughts or ideas? Thanks in advance.

  Hi Gregg1,

  Since you continue to receive the error after you perform the troubleshooting steps you mentioned, the printer will require maintenance.  As you bought the printer in the past year, it is still within the warranty period; Please call or write us using one of the methods on the page contact us for further assistance.

• Help to choose the upgrade memory for Aspire D270-1401

  I had difficulty pinning down the specification of an upgrade memory to 2 GB for my Aspire One D270-1401.  Can someone help me decide between PC3-12800 and PC3-8500.  It doesn't seem to be any help available for this model on the Acer site.

  The model has locations of memory that one alone and it supports DDR3 PC3-12800 unbuffered NON - ECC 1.35v.

  Click on the Kudos to say 'Thank you' to help!

• Processors of Supportep by AU HP 1000-1401

  Hi there I own a HP laptop...

  First and last name to HP 1000-1401.

  AMD A68M chip-set with AMD APU E1-1500 with Radeon HD Graphics 1.48 GHz 64-bit. I just wanted to know that is there any high or more than 1.4 GHz processor taken in charge by this laptop. I want to at least 2.5 GHz. Please suggest me any 2.5 GHz processor supported by this laptop.

  Help, please.

  Here is the Manual:

  Manual

  If you look at the list of part of system boards, you will see that there is a different Board for each processor. This means that the CPU is soldered to the motherboard.

  It's the top processor of the page option:

  AMD E2-2000 1.75 GHz processor (speed of 1333 MHz memory, dual core, 18 W)

  Still a very low CPU and not worth the time and effort and money to upgrade.

  If you want similar performance to a 2.5 ghz cpu, that means buying a different laptop. The cost of replacing the motherboard on your would be close to the price of a new laptop, anyway.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Mounted on Linux HP PSC-1401 guard print a file strange book-catalogue

  2013 11-23

  I have recently acquired a very nice printer for all-in-one HP PSC-1401 someone and did not have the chance to use it with my Ubuntu Linux computer until today.  At first, I checked the scanner section and found that it works well.  But when I asked to print a small text file, kept printer printing a file that had clearly been stored in its memory

  a previous task.  So far I could not get rid of this strange file in any way.  What is more, Linux shows the PSC1401 printer as default printer as well as the text file I want to print.  But the printer does its own thing.

  Another very strange thing, it's that the printer prints even when USB cable is not connected to the computer, which is be a HP d530 table top.  Is the PSC1401 a machine wireless?

  Thank you very much.

  [Redacted for privacy]

  2014 03-07

   

  P R O B L E M - O N O - S O L V E D *.

  I would like to close this post I just solved my problem by running the following.

  sudo apt - get remove hplip

  sudo apt - get install hplip

  sudo apt - get update

  CD/usr/lib/cups/filter

  sudo ln-s foomatic-rip foomatic-rip-hplip

  I owe my gratutude to bryan641 to www.linuxquestions.org to the last two commands, which allowed HPLIP - 3.12.2 and so my hP printer to work in Ubuntu 12.04 1401.   Now all my previously reported problems are gone for good.

  Julian Loui

• Correct Version of Linux Ubuntu 12.04 HPLIP HP PSC 1401 all-in-one printer

  2014-03-07
  
  I would like to know which version of hplip I should install for the HP PSC 1401 printer in Ubuntu 12.04.  LInux revealed a vague 'General/Unknown error' at the end of my installation of hplip-3.14.1.  Even though I haven't seen any system errors
  throughout my installation of hplip-3.12.2, the results have not been good; CUPS indicates that the foomatic-rip-hplip file is missing and my print jobs just get stored in the queue.  In other words, there is no communication bewteen the printer and driver.
  
  Only hplip-3.12.2 is available from Ubuntu 12.04  and I sense that it is not the right version for my printer.  Can anyone tell me what to do in this case, especially how to find and download the right driver?  
  
  Is there a good way to un-install any version of hplip without doing it laboriously, especially if it is downloaded directly from HP?  Thank you all very much.
  
  Julian Loui
  
  
  

  I just answered my own question by discovering a problem hplip - 3.12.2.  I found on www.linuxquestions.org that I can still use 3.12.2 as long as I link foomatic-rip to foomatic-rip - hplip after insatlling my printer.  This fix was given by bryan641 to the www.linuxquestions.org. My sincere thanks to Bryan.

  CD/usr/lib/cups/filter

  sudo ln-s foomatic-rip foomatic-rip-hplip

  Now all the old problems have disappeared and my HP PSC1401 works well.

  Julian Loui

• Re - install a hp psc 1401 all-in-one for windows 7 64 bit

  does anyone know how to re - connect a hp psc 1401 all-in-one for windows 7 64 bit? This configuration worked flawlessly for several years now, but it has suddenly stopped working.  I discovered that this model is even more appears on the software and drivers HP site.  Peroxide of hydrogen used to have such excellent customer service, but now it's like this all-in-one is useless without the right software.

  Hello

  The HP PSC 1401 software can be obtained from the HP site.

  Here's the product page with the download of the software of your device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4063&product=1103491&sw_lang=

  Kind regards

  Shlomi

• I try to print to hp 1401 Windows 7

  Device

  Hello, I have windows 7, im tring to connect a printer that worked with windows xp, 98 and 2000, this is a hp 1401 all in one

  is it possible.

  Hello, I have windows 7, im tring to connect a printer that worked with windows xp, 98 and 2000, this is a hp 1401 all in one

  is it possible.

  Any material support, regardless of your choice of operating system, is the manufacturer of the equipment.  This includes the software and drivers that allow him to communicate correctly with a given operating system, so that you and your applications can use.

  Since then you have (rightly) the printer all in one HP PSC 1401 <-- there="" is="" your="" support="" (that="" is="" a="" web="">

  It resembles what you need (in particular) may be the printer HP Deskjet and Officejet Software Suite (advanced imagery and product functionality) and driver -at least that's where I suggest you only start.  Download and install it.

• "Out of memory error" - and can not reinstall correctly - Psc 1401

  Hello

  I have somehow all of a sudden started to receive an 'out of memory' error whenever I try to print. So I tried every idea I can find to try to re - install my printer and the software but can't even get that accopmlished without getting "fatal errors". (tried Print doctor, following the troubleshooting report trying to install mode of boot etc..) Anyone encountered this problem recently and found a way to fix it?

  With the help of:

  Printer - PSC 1401 all-in-one

  Windows 7 64 bit

  Recent changes, I did before noticing that this erorr, is that I have installed a new video card and more ram... no idea why this would cause a problem.

  Thanks for any help.

  @HP-CompaqPC, please check your Inbox again private message.

  Here's where you can find the private message Inbox.

  

• REP-1401 - very strange error

  DB 10G

  reports 6i.

  It's a report execution with the parameters of the existing company and date code. Suddenly by a particular (ex 'X 001') company code and the date given (1 January 2014"), report is end up with error REP-1401 - fatal error in PL/SQL CF_1formula.

  He works for other dates with the same company code.

  For other company code for this date of January 1, 2014 "report is running.

  After GOOGLE cooking, I'm tired as many people encountered this error, but none of them provide a positive feedback.

  So, I tried like below

  Given that the error comes from the formula CF_1... I just deleted the formula in the report and tried to run the report without this formula. Even after the removal of formula CF_1, I get the same "EP-1401 - CF_1formula fatal error." PL/SQL"error.

  How it is possible that I have no such object so how does.

  Request report expert to help me on this issue.

  Thank you

  Hello.. Root of the problem is identified and corrected.

  Here's how,.

  In the report, there is a column of formulas with the name "CF_1" - Thiis Query side as - summary report...  1

  Data model it is a column of formulas called "Annotation", but the formula of service name is 'Function CF_1Formula'... 2

  We have removed the first object, since keeping getting the same, tried looking for the same object, then found the second object that. Error of this fist because of shor of the length size.

  Now the sixe has increased and so deliver fiexe

• Rep-1401 error, ora-01722

  Hello
  In report 6i, is to show the error 'Rep-1401, ora-01722' in the formula of CF_1FORMULA0005 below.
  
  And in the formula of the query "select count (*) into ra_customer_trx_all c.
  where nvl (to_number (interface_header_attribute1), 0) =: order_number
  and nvl(interface_header_attribute3,'') =: invoice_number; »
  
  Here the: order_number is the data type of number and interface_header_attribute1 is the Char data type.
  
  may be problem existing in this query. Then please suggest a solution to solve the problem. I can rewrite the query?
  
  
  --------------------------------------------------------------------------------------------
  function CF_1FORMULA0005 returns the number is
  x number: = 0;
  c number;
  Start
  Select count (*) in the ra_customer_trx_all c
  where nvl (to_number (interface_header_attribute1), 0) =: order_number
  and nvl(interface_header_attribute3,'') =: invoice_number;
  
  If c = 1 then
  Select nvl(doc_sequence_value,0) x ra_customer_trx_all where to_number (nvl(interface_header_attribute1,0)) =: order_number
  and nvl (interface_header_attribute3,' ') =: invoice_number;
  on the other
  x: = 0;
  end if;
  Nvl (x, 0) return;
  end;

  I think the problem is that

  to_number(interface_header_attribute1)
  

  fails when there are no numeric values in interface_header_attribute1.

  You can write a function stored in the database to convert float values to multiple values.
  These function must intercept conversion errors and return a default value appropriate (or null).

  You can then use your own function place buildin to_number function.

  Published by: hm the 05.09.2011 01:25