HP C7000 GbE2c to Procurve networking woes

Similar Questions

• vCAC 6.0 - network woes, "transport area.

  Hello

  I have a new deployment of vCAC 6.0.  I have no experience with earlier versions.  We were previously Mid-deployments of a vCD environment, but then the announcement came out all splitting the IAAS providers vs private cloud application of each product.  We opted to move to vCAC since we were not fully engaged in vCD.

  We have worked successfully in the environment and have imported several VMS in vCenter.  However, I have some difficulty to obtain several computers plans in place with any form of networking.  Whenever I try, vCAC calls for a Transport area.  My Googlings, it seems the Transport areas are a characteristic of the NSX.  However, to read the vCAC documentation, I can apparently do the same thing with vCloud network and security.  I installed and implemented version 5.5 of vCloud network and security, but still without areas of transport!

  Can anyone help?  Thanks in advance!

  -Jesse Reinhart

  Well, I think that I fixed my own problem.  Expanded in POSSIBLE transport vCAC translates network zones.  My problem is that once I had set up POSSIBLE correctly, I does not kick off a collection of data from vCAC to collect new items of inventory.  The default is every 24 hours.  After you run manually the data collection, the scope of network I created in POSSIBLE appeared in vCAC as a transport area.

  Now to the configuration/troubleshooting!

  -Jesse Reinhart

• Networking woes

  I just changed my ISP from comcast, but now I can't see my computers in the workgroup of 2 of my 3 computers in the workgroup. Internet access is very good and networks on the Macintosh side perfectly, but I can not access a database on my main computer. I tried to remap the network drive, but I can't get through. Any ideas?

  Check your private Messages.

• 5.1 network throughput problems c7000 and vSphere

  Hello, I'm new to the forum and I want to say hello to everyone!

  Here is the main reason why I joined the forum:

  I have a weird problem with my HP C7000 enclosure and VMware vSphere 5.1

  I used a standard vSwitch to connect virtual machines and associate them with a vmnic for my traffic from public network segment. With this configuration, I found that when I tried the command SCP to copy some files from VM1 VM2 to, there where good productivity, just as planned, but when I tried to copy to VM1 VM2, it just drag at a ridiculous speed, like 16 Kbps up to it just hold. I could repeat the same behavior whenever I try. So I just tried using the vswitch distributed, and the behavior has changed. Now traffic of the CPS goes as it should be between virtual machines, but the problems of flow between a virtual machine and a physical host like this: when I copy from the physical host to virtual machine, flow is as it should be, but when I try to copy the VM on the physical host, yet once it stalls.

  Please can someone give me some clues?

  Here's another thing, I have a blade with vCenter in 2012 Windows installed it works as it should with external hosts.

  I used vSphere in other environments and never had something like this behaviour before.

  Thank you.

  Hello

  I found the problem, the switch was defective. Just changed to an e3800 HP switch and all together.

  Thank you!

• Network of twinning with Port trunks to support the host ESX VShere 4 with several NIC for load balancing across a HP ProCurve 2810 - 24 G

  We are trying to increase production of our ESX host.

  ESX4 with 6 NIC connected to HP Procurve 2810 - 24G 2 ports; 4; 6; 8; 10 and 12.

  The

  grouping of parameters on ESX is rather easy to activate, however, we do not know

  How to configure the HP switch to support above connections.

  Pourrait

  someone please help with a few examples on how to seup the HP switch.

  Help will be greatly appreciated as we continue to lose tru RDP sessions

  disconnects.

  Best regards, Hendrik

  Disabling protocols spanning-tree on the Procurve ports connected to the ESX host is going to promote a recovery more rapid port. Similarly, running global spanning tree is not recommended if you mix some VLAN iSCSI and data in the same fabric (i.. e. you do not want a STP process to hang storage IO). Spanning tree on your switches, look PVST (or Procurve BPMH) to isolate the STP VLANs unique events.

  In regard to the load balancing is, by default (route based port ID) value algorithm requires less overhead on the ESX hosts.  You may not use LACP on the Provurve the lack of facilities LACP ESX. You must use "route based on the IP hash" sideways ESX and 'static trunks' on the side of Procurve. Unless you have specific reasons why your network need loads this configuration, I'd caution against it for the following reasons:

  (1) IP hash requires thorough inspection of packages by the ESX host, increasing CPU load as load package increases;

  (2) the static configuration puts switch physics rigid and critical ESX host port mapping. Similarly, groups of ports all will fail as the Procurve batteries for management only and won't be on switches 802.3ad circuits Group (i.e. all ports of a group of circuits must be linked to a single switch) - this isn't a limitation of the port ID routing;

  (3) K.I.S.S. love port ID mix of port ID, beacon probe and failover on the port assignments you will get segregation of the raw traffic without sacrificing redundancy - even through switches.

  I hope this helps!

  -Collin C. MacMillan

  SOLORI - Oriented Solution, LLC

  http://blog.Solori.NET

  If you find this information useful, please give points to "correct" or "useful".

• Allowing the VPN Clients to the management network - nat woes

  Try to allow the VPNClient IPSEC access to the management network.  packet trace stops on the vpn encrypt even through phase 7 States it's NAT EXEMPT, he said his tent still NAT by a static.  The only thing I can think to put a rule of nat exempted for the subnet on the external interface.

  Please notify.  Thank you.

  Phase: 1
  Type: ACCESS-LIST
  Subtype:
  Result: ALLOW
  Config:
  Implicit rule
  Additional information:
  MAC access list

  Phase: 2
  Type: FLOW-SEARCH
  Subtype:
  Result: ALLOW
  Config:
  Additional information:
  Not found no corresponding stream, creating a new stream

  Phase: 3
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  in 0.0.0.0 0.0.0.0 outdoors

  Phase: 4
  Type: ACCESS-LIST
  Subtype: Journal
  Result: ALLOW
  Config:
  Access-group MANAGEMENT-IN in the management interface
  access-list MANAGEMENT-IN-scope ip allowed any one
  Additional information:

  Phase: 5
  Type: IP-OPTIONS
  Subtype:
  Result: ALLOW
  Config:
  Additional information:

  Phase: 6
  Type: FOVER
  Subtype: Eve-updated
  Result: ALLOW
  Config:
  Additional information:

  Phase: 7
  Type: NAT-FREE
  Subtype:
  Result: ALLOW
  Config:
  match ip MANAGEMENT 10.10.10.0 255.255.255.0 outside 172.18.0.32 255.255.255.240
  Exempt from NAT
  translate_hits = 3, untranslate_hits = 33
  Additional information:

  Phase: 8
  Type: NAT
  Subtype:
  Result: ALLOW
  Config:
  static (MANAGEMENT, outside) 203.23.23.75 10.10.10.10 netmask 255.255.255.255
  MANAGEMENT ip 10.10.10.10 host game OUTSIDE of any
  static translation at 203.23.176.75
  translate_hits = 0, untranslate_hits = 1
  Additional information:

  Phase: 9
  Type: NAT
  Subtype: host-limits
  Result: ALLOW
  Config:
  static (MANAGEMENT, outside) 203.23.23.75 10.10.10.10 netmask 255.255.255.255
  MANAGEMENT ip 10.10.10.10 host game OUTSIDE of any
  static translation at 203.23.23.75
  translate_hits = 0, untranslate_hits = 1
  Additional information:

  Phase: 10
  Type: VPN
  Subtype: encrypt
  Result: DECLINE
  Config:
  Additional information:

  Result:
  input interface: MANAGEMENT
  entry status: to the top
  entry-line-status: to the top
  output interface: OUTSIDE
  the status of the output: to the top
  output-line-status: to the top
  Action: drop
  Drop-reason: flow (acl-drop) is denied by the configured rule

  -EXCERPT FROM CONFIG-

  CorpVPN to access extended list ip 10.10.10.0 allow 255.255.255.0 172.18.0.32 255.255.255.240
  Access extensive list ip 172.18.0.32 CorpVPN allow 255.255.255.240 10.10.10.0 255.255.255.0

  mask 172.18.0.33 - 172.18.0.46 255.255.255.240 IP local pool CorpVPN

  access-list MANAGEMENT-extended permitted tcp 172.18.0.32 255.255.255.240 host 10.10.10.11 eq ssh
  access-list MANAGEMENT-extended permitted tcp 172.18.0.32 255.255.255.240 host 10.10.10.10 eq ssh
  access-list MANAGEMENT-extended permitted tcp 172.18.0.32 255.255.255.240 host 10.10.10.13 eq 3389

  access-list 101 extended allow ip 10.10.10.0 255.255.255.0 172.18.0.32 255.255.255.240

  NAT 0 access-list (MANAGEMENT) No.-NAT-DU-MGMT
  access-list no.-NAT-DU-MGMT scope ip 10.10.10.0 allow 255.255.255.0 172.18.0.32 255.255.255.240

  CorpVPN to access extended list ip 10.10.10.0 allow 255.255.255.0 172.18.0.32 255.255.255.240
  Access extensive list ip 172.18.0.32 CorpVPN allow 255.255.255.240 all

  internal CorpVPN group strategy
  attributes of Group Policy CorpVPN
  value of server DNS 203.23.23.23
  VPN - connections 8
  VPN-idle-timeout 720
  Protocol-tunnel-VPN IPSec l2tp ipsec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list CorpVPN
  the address value CorpVPN pools

  type tunnel-group CorpVPN remote access
  attributes global-tunnel-group CorpVPN
  address pool CorpVPN
  Group Policy - by default-CorpVPN
  IPSec-attributes tunnel-group CorpVPN
  pre-shared key

  First of all, there is overlap crypto ACL with the VPN static L2L:

  crypto ASA1MAP 10 card matches the address 101

  access-list 101 extended allow ip 10.10.10.0 255.255.255.0 172.18.0.32 255.255.255.240
  access-list 101 extended allow ip 172.18.0.32 255.255.255.240 10.10.10.0 255.255.255.0

  I would remove the 2 lines of ACL 101 above because it is incorrect.

  Secondly, from the output of ' cry ipsec to show his ", you seem to be getting the ip address of the"jdv1.australis.net.au", not"CorpVPN"pool pool. Therefore, the No. NAT ACL on the management interface is incorrect. I would just add a greater variety of education no. NAT so that it covers all your ip pool:

  access-list no.-NAT-DU-MGMT scope ip 10.10.10.0 allow 255.255.255.0 172.18.0.0 255.255.255.0

  Thirdly, even with your dynamic ACL 'OUTSIDE_cryptomap_65535.65535' crypto map, it only covers the 172.18.0.32/28, so I just want to add a wider range since it seems you get the ip address of the different pool:

  OUTSIDE_cryptomap_65535.65535 list of allowed ip extended access all 172.18.0.0 255.255.255.0

  Then I would disable the following group of access for purposes of test first:

  no access-group MANAGEMENT - OUT Interface MANAGEMENT

  Finally, please clear all the SA on your ASA and xlate, then reconnect to your vpn client and test it again:

  delete the ipsec cry his

  clear the isa cry his

  clear xlate

  Please let us know how it goes after the changes. If it still doesn't work, please please send again the last configuration and also to send the output of the following:

  See the isa scream his

  See the ipsec scream his

  and a screenshot of the page of statistics on your vpn client. Thank you.

• Cannot access ESXi server via network

  Hello world!

  We have a HP C7000 Encolosure with 4 BL460c Gen 8 blades in front size of it. Back size of the C7000, we have 2 SAN Switch, 2 switch HP BLc GbE2c layer 2/3 and 2 Onboard Administrator Module.

  Everything is working fine with IP addresses like this:

  OA active:

  IP address: 172.16.0.253

  STANBY OA:

  IP address: 172.16.0.254

  Server Blade BL460c Bay 1:

  The IP address of the ILO: 172.16.0.10

  Server Blade BL460c Bay 2:

  The ILO IP address: 172.16.0.11

  BL460c blade Bay 9:

  The ILO IP address: 172.16.0.19

  Server Blade BL460c Bay 10:

  The ILO IP address: 172.16.0.20

  We can ping pc that connected to the port of ILO on Onboard Administrator (OA) IP addresses above. (I can it call PC MANAGE?)

  Continue, we access OA via Web https://172.16.0.253 use of , then Console integrated to control 4 Server blades. We have mounted image ESXi 5.1 U1 and successfully installed on 4 servers blade.

  We manually config IP address on each ESXi Server (like this):

  BL460c Server Blade on Bay 1 as server ESXi 1:

  IP address: 10.0.0.11

  BL460c Server Blade on Bay 2 as server ESXi 2:

  IP address: 10.0.0.12

  BL460c Server Blade on Bay 9 as a server ESXi 9:

  IP address: 10.0.0.19

  BL460c Server Blade on 10 Bay as a server ESXi 10:

  IP address: 10.0.0.20

  Now we can ping server to another server ESXi ESXi 1. I mean 4 Blade Server can ping together.

  BUT:

  -We can not ping servers to blade PC of manage (that PC connect to the port of ILO on OSTEOARTHRITIS. In this scene, MANAGE PCs has the IP 172.16.0.100/16)

  -We unplug the network cable from the port of iLO, then connect it to the port number 24 on HP BLc GbE2c LY 2/3 switch, then address IP of the PC to MANAGE the 10.0.0.100/24 value. Always the same, can only access servers

  Can someone explain to me how to access this server (ping, http, etc...). Do we have to config switch HP BLc GbE2c LY 2/3? We read many many guide on the HP website, but they have not mentioned about routing or switch to configure

  Thanks in advance!

  It's my mistake!

  My servers have 2 connections FlexLOM. That a connection has been enabled for 'network management' in ESXi. I do not understand, then I activated 2 connections. That cause outside the network can not access them.

  I just disabled a single connection and everything works perfectly.

  I thank everyone!

• 1 St gen AX and connect to the new network Netgear M/R...

  Updated my cable modem/router to a Netgear C7000 and can't get my 1 St gen airport to reconnect to my network - Express use only in client mode to stream iTunes to amplified speakers. Have you tried all the typical solutions, but wonder if the problem may be with the security settings. The 1st gen AX supports WPA2-PSK security?

  Yes, he does.

  However, users often get confused about what could be a 1st Gen AirPort Express.  Please check to locate the model number of the Express... it's on the side of the unit... hard to see... so you need good lighting and reading glasses.  The model number starts with an 'A' follow-up of four digits.

  A 1st Gen AirPort Express is A1264 model number.  The 1st Gen means that it was the first Express to use 802.11 "n" wireless.

  If you see A1084 or A1088, it is wireless a lot more old "b/g" which has been sold long before that Apple has started using the generation of naming when 802.11n model was introduced in 2008.

  If that's what you have, then you will probably need to use WPA - PSK - TKIP security settings.

• ProCurve 2610

  2910-al example hp configuration: 2 LAN switch and backplane with management LAN (cluster HA). Background basket of interconnection example
  
  These instructions assume that you configure a button for employment in  two switches, LAN and backplane with LAN management and interconnection. If you use a different configuration, modify the steps according to the case.
  To assign ports, follow these steps:
  
  1. in the VLAN Menu, highlight the Port of VLAN assignment and press ENTER. The Port assignment screen opens.
  
  2. use the arrows on the Action-> menu to select modify and press ENTER. You can now change the information on this screen.
  
  3. set each port on Forbid to the DEFAULT_VLAN by selecting the parameter in the column for the VLAN, and then press space.
  
  4. Select Port 1 as the Uplink of VLAN LAN / Mgmt to connect your cluster to the rest of your network.
  
  5. set  network LAN to Untagged.
  
  6. set  network BACKPLANE VLAN to Forbid.
  
  7  Select Port 2 as the VLAN backplane
  
  Uplink port to connect the two switches together for the network VLAN BACKPLANE.
  
  8. for background basket ports, the value Ports 17-24 to allow 8 knots without any adjustment of switch VLAN Untagged. (For Option 3: single switch, rack only with the management of LAN, defined Ports 2-24)
  
  to Untagged.)
  
  How to steps 4 and 7.
  
  8 throws me a loop for, because I'm supposed to do step 6?
  

  Hello:

  You can also ask your question in the Forum of HP Business - section ProCurve switches Support.

  http://h30499.www3.HP.com/T5/ProCurve-provision-based/BD-p/switching-e-series-Forum#.Uel_BL4o69I

• Apple TV cannot connect to Modem/Router C7000

  Hello

  I'm completely stumped on this, this is no logic.

  I upgraded a Netgear WNDR4300 wireless router to the modem/router combination C7000. The old router never caused any problems with the connection of wireless devices, but this new C7000 is frankly a pain!

  I agree with Apple TV network and the password is accepted, but no matter what I do the router never sees the Apple TV as a connected wireless device!

  Yet once, it worked flawlessly on the old Netgear router.

  The other two devices wireless I have connected the two had WPS (a printer and a device), but the Apple TV does not support this so I get the password manually but it simply refuses to work!

  I was wasting hours on this today.

  I'm a software engineer so I understand this and frankly there is no earthly reason, I can see why he just refuses to work.

  Y at - it a bug with this modem/router C7000 that will not work properly if you cannot connect using WPS?

  And what is the problem of not having a FW upgrade option in this device?

  This FW version: V1.01.20. Is this the last?

  Help, please.

  Thank you

  Allen

  Well, now I feel like a fool. I unplugged the old router and thought that I had turned it off, then I drop it on the floor and began setting up the new router. I wanted to keep the same network name so I changed it and set the password accordingly.

  It's when I couldn't connect the Apple TV. And after all that, I look down the OLD router and to somehow do NOT turn it off as I thought I did.

  If the network name being the same, my Apple TV connected to the OLD router instead of the new.

  Argh, what a rookie mistake!

  Everything is OK now.

  Sorry everyone,

  Allen

• The C7000 can be mounted?

  Hello
  The C7000 can be mounted? It has holes for screws so it can be attached inside a box of network on the wall?

  I will no doubt tell you don't want not to mount the C7000. In the design phase of the product it goes up once had of the mounting holes on the case, but the material inside is running too hot for the unit safely. He needs ventilation all around him. If you were to ride with one hand against a wall air cannot circulate properly. If you mount your C7000 somehow, I can guarantee you basically you overheat it and have a hardware failure and may even cause a fire.

• HP Procurve vlan voice with trunks

  Hi all

  I am a trained guy cisco, so I try to transfer my knowledge to the HP Procurve switches but it takes a little help to obtain VLAN etc set up.

  What I have is 4 switches, 3 at the access layer to the and 1 to the base and distribution.

  I want that switches to a trunk of the base and distribution layer 2 interfaces access layer allows to increase the speed of 2 instead of 1 gigabit uplink. Also, I want is that 2 VLANS is set up for separate voice and data. I want that all ports to be able to take in charge a PC or a VOIP phone. I put the phones to automatically tag the tag of vlan for the vlan voice, but I want all traffic to forward the link to resources shared at the base and distribution layer.

  From what I understand, so I need to:

  Configure a network interface on the access and use of basic/distribution layer switches: b1 - b2 trk1 lacp trunk

  Add VLAN for voice and data and assign vlan voice.

  The problem I have is the tag-no identified parameters.

  I tag vlan trk1 voice and set the priority of the qos to 6 and then comes to create the vlan data not marked on trk1?

  the config I've written so far is:

  b1 - b2 trk1 lacp trunk
  show trunks
  spanning tree
  spanning tree force version rstp operation
  voice VLAN 100 name
  voice
  Tagged trk1
  QoS priority 6
  data name VLAN 200
  not tagged trk1

  is this correct or am I missing something here?

  Thanks in advance!

  Hello:

  You can also copy and paste your message into the HP Business Support Forum - section Procurve switches.

  http://h30499.www3.HP.com/T5/ProCurve-provision-based/BD-p/switching-e-series-Forum

• Cisco CSA 4.2 + RADIUS + HP procurve switches

  Hello!

  We mixed network environment with cisco / HP hardware.

  We are currently assessing the Cisco ACS 4.2 to manage network access network equipment.

  Cisco equipment works very well, but we have problems the RADIUS and procurve switches (Ganymede works very well)

  I googled around and it seems that you need to create a new '(VSA, Vendor) vendor-specific attributes' for procurve switches and the IETF radius settings according to the variables on the right which must match the HP equipment.

  Problem is that I can't find this information online.

  Anyone who manages to solve this problem?

  Would really appreciate help!

  Thank you

  BR

  Generally, you should download VSA for acs. You must get the HP ini file. Once you have you need create a vsa and transfer it to acs.

  Because we need to add a specific seller attribute in the TAS, then we must first

  Create a file 'accountActions.csv' using the format specified in "RDBMS synchronization."

  Import definition', once we are ready with the file, then we must do an RDBMS

  Synchorization folder of ACS (SE) and then go on:

  Reports and activity > RDBMS synchronization and make sure that the synchronization has been

  done it without error. Once this is done, you must re - start the ACS SE, then

  We can create a new AAA client and use the new RADIUS (xxxx), and the attributes that we

  added can be made visible for:

  The interface configuration > and select the newly added Radius VSA attribute.

  : RDBMS synchronization:

  http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacsapp/CSA

  PP40/ugse40/sad.htm#wp756877

  : Import a definition RDBMS synchronization:

  http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacsapp/CSA

  PP40/ugse40/AG.htm

  Kind regards

  ~ JG

• Switch proCurve 2626 (J4900B) - supported VLAN?

  Hello!

  I tried to Setup VLAN because I really need this feature, but I encountered a problem.

  My current setup:

  I had 2 switches that are connected via an optical cable.

  My question is how to install ports than Let's say 10 to 15 are on the same thing but separated on the two switches network?

  So that DHCP which is on 10-15 does not give the addresses to other ports?

  and devices on 10-15 on one and 10 to 15 other Switch are the?

  Thank you!

  Hello:

  I suggest that also post your question in the Forum of HP Business - section Procurve switches Support.

  http://h30499.www3.HP.com/T5/ProCurve-provision-based/BD-p/switching-e-series-Forum

• HP Procurve zl5412 routing

  Dear,

  I have a network with 2 different subnet

  subnet 1: 10.44.x.x

  subnet 2: 192.168.3.x

  DG: 192.168.3.10

  I need to be able to access the two netorks of two subnets.

  I created on the main switch (192.168.3.254) ip Routing

  I created the static road on the ADSL modem

  but still no luck

  I ping the other subnet (10.44.x.x) of the primary subnet (192.168.3.x)

  But conversely, I cannot ping

  help please...

  This is the Forum of consumer products.

  Switch ProCurve is a product of the company, you would be better served by joining and posting in the HP Enterprise BusinessCommunity.

  Best regards

  ERICO