vCAC 6.0 - network woes, "transport area.

Similar Questions

• Satellite A300-1MC: network controllers drivers are not installed properly

  Hi guys...

  My first lol just purchased Toshiba and I can't ge the wireless to work?
  Toshiba A300 - 1MC Intel T5800 3gig of ram 20gig hard drive Vista Home wired Internet access works ok, but in Device Manager it says my network controller drivers are not installed properly?

  I have reset to setting faactory and reinstalled everthing but its still the same.

  Ideas a BIG help thanks in advance.

  This strange s
  Usually, using the operating system recovery disc must be set to the factory setting and everything should be ok.

  However, I recommend first upgrading the BIOS, then the LAN/WLan card driver.
  The card chip Realtek (Realtek 10/100 Base-TX) LAN and WLan card chip is Intel (Intel 802.11 a/g/n WiFi Link 5100AGN)

  Download the WLan driver from this page Toshiba WLan:
  http://APS2.toshiba-tro.de/WLAN/

  and the LAN driver can be downloaded from the Realtek page, or on site pilot European Toshiba too.
  Remove/uninstall the old drivers and then install the new drivers.

  Good bye

• Shairng private network file - files are not properly sharing

  I am a small business owner. I set up a private network. Instead of sharing in the 'Public' folder, I identified individual files and does the work to ensure the sharing of files. The files are "marked" as being shared in the network and sharing Center files appear when I click on "Show me the folders and files that I share", but when entering the network, the files are not displayed.

  Protection options password for account currently OFF sharing. Other sharing (print, media, CAD drawings) work.

  How to solve this problem?

  We have a laptop running Windows 7. two laptops and two desktops running Vista. All versions are Home Premimum and basically serve us well.

  Hello

  You must open a new folder under the main hard drive (or any disk storage) (you can also add void structure of folders for) and share the new folder as a whole. and leave only the public folders. Move the relevant files to the new folder structure.

  Maybe this can help more.

  -- ---------------------
  

  This message looks like a long history because I don't know what is the level of knowledge of the user, and what has already been done.

  The info goes through the motions of the configuration and verify most of the common aspects of the functionality of Windows OS' LAN.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If necessary check specifically Permission/security settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  Please note that the users and groups listed on the screen shoot are just an example. Your list will focus on how your system is configured.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP Dm1 3025DX network controller drivers are not installed after reinstalling windows

  Hello

  I have a laptop HP Dm1-3025DX Windows 7 home premium 64 GB and after reinstall windows from the network controller and Ethernet controller both say the drivers for the device are not installed. I can't understand how to solve this problem or download either. I don't have access to the internet on this computer so I use another computer for this post, and I'll have to use this computer to download drivers also. Help, please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100668-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102448-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90955-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  Judging people, see if they install.

• Error message 0 x 80004005 Unspecified error trying to connect to either network drives and printers network on the same network or network drives that are on the same workgroup.

  Essentially, this problem started last Friday and I tried all possible combinations and the thing that I know so far about how to solve this problem and I terribly need a solution because I use this laptop in a University to take notes and print them out / store them on the network. Right now I can ping both servers (one is a print server and the other server network file storage), but in both cases, when I try to connect to them using windows Explorer by the name of \\server name\share or \\printserver\ (the other usually allows me to see a table of printers that are in different locations and I choose who I connected to my laptop). The other method, I have tried to use, which works normally and does not now to map the network drive storage is the net use command, if I try this method, I will get a "system error 1231 has occurred the network location cannot be reached". The third method (which is more commonly used I think) is the ability to connect a network drive in Windows Explorer, usually if I use the third method, I get a response from the storage server file asking for user credentials, now I get the same error message as when I try to connect with the first method of.

  The biggest mystery of this all is that this happens regardless if I'm on the wired or wireless, and in both scenarios, I have access to the internet available, but as mentioned above, no access to storage or a network printer.

  * Use at your own risk, but it worked in my case (ensure you know / remember passwords field before doing so).

  If (since) you are using Windows 7 and you suddenly have problems connecting to a resource of the area (especially after a password reset):

  1) go to:->-> advanced user accounts manage user accounts-> manage passwords

  (2) If you see Windows credentials, delete them all.

• network file names are incorrect

  I know this isn't a new problem, but it's one that I just found playing with my network. What I see, it's incorrect file names when I discover a directory of files on another system.

  My network consists of three computers: (1) a laptop running Windows Vista Home Premium 64 - bit edition with service pack 2; (2) a laptop running Windows 7 Home Premium 64 - bit edition with service pack 1; and (3) a desktop computer running Windows XP Home Edition 32 - bit edition with service pack 3. The two laptops are connected to the network via a wireless connection and the desktop computer is connected via a wired Ethernet connection. All systems are up to date, as of the writing of this message (05/04/2011).

  Incorrect file names appear between two laptops, while the XP system sees the correct file names.

  To be explicit, let's say I'm on portable 2 and I open the directory Public/Public/Sample image images on laptop 1. the file names of the images I see are incorrect. For example, one of the images is named "Chrysanthemum" but when I open the image I see "stream". Now, the actual image on laptop 1 is called "Creek", but it was misnamed in the directory listing as "Chrysanthemum". So what I actually see what's actually on the laptop 1, but it has the wrong name. Now, this is where it gets weird: the wrong file name, in this case "Chrysanthemum", is actually the name of an image on laptop 2.

  This behavior is reflected when I'm on portable 1 and I opened the users/Public/Public/Sample image images on laptop 2. In this case, one of the images is named 'Toco Toucan' but when I open the image I see "Medusa". Now, the actual image on laptop 2 is named "Jellyfish", but it was poorly named in the list as "Toco Toucan" of directories. And once again, in this case 'Toco Toucan' is the name of an image on laptop 1.

  The designation of bad is a bit random. In other words, some pictures are named incorrectly, and some are named correctly.

  Interestingly, if I find the directories of portable 1 and 2 computers in the XP system, I see the correct file names. And vice versa, if I find the directory from the desktop to a laptop, I see the correct file names. So, the problem seems to be unique for transactions between Windows Vista and Windows 7 systems.

  If I create a shortcut of the file name of the image, the properties of the shortcut will reveal the name of the file to the real destination. For example, if I create a shortcut of the Toco Toucan, the properties of the shortcut display \\laptop 2\Users\Public\Pictures\Sample Pictures\Jellyfish.jpg.

  Looking for some references to this problem on the Internet has been very difficult due to the complexity of the problem, but I could find only one reference which seems to describe the problem, it is however an old reference (April 8, 2007): http://www.eggheadcafe.com/software/aspnet/29691878/incorrect-filenames.aspx

  There are indeed from the Thumbs.db files in those directories, however, their removal does not correct the problem.

  Has anyone else encountered this problem? Y at - it a fix for the problem? I can't believe that this problem has not been resolved by Microsoft.

  Puzzled in the Warren Massachusetts

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

  It will be useful.

• Dell N5010 network adapter drivers are not compatible with windows 7 (32 bit)

  Hello

  I have laptop dell n5010, I installed windows 7 ultimate (32 bit). but the network drivers are not getting installed on this operating system. demand for the windows 7 or windows vista 64-bit. any solution to this problem?

  http://support.Dell.com/support/downloads/index.aspx?s=DHS&CS=19

  Go to Dell over the link for Windows 7, Drivers etc.

  If Dell does not have them, you're out of luck.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forums.

  There is a list of the Windows 7 Forums at the link above to help you.

  You get the help you need there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Inability to access the network home "You are not allowed..." »

  On my home network as well with Win 7, my desktop pc can see and access the shared files on the laptop.  On the laptop, the shared files are visible, but when the "shared desktop" is clicked on the message says "Windows cannot access \ yadayda.» You are not allowed etc... "The other shared folders are accesiuble. Why?

  Both computers show as a home network with identical names and working groups.  Disable the firewall does not help.

  SOLVED re share the desktop folder.

• VM network transfer speeds are two times faster than the speed of the physical network

  My stats from the server:

  HP Proliant ML110 G6

  Intel Xeon X 3440 @ 2.53 GHz

  8 GB RAM

  1 Gigabit NIC onboard

  1 PCIx dual port Intel Gigabit NIC

  1 1 to Seagate HARD drive (for virtual machines and ISO storage)

  4 1 to HP 7200 RPM hard drives

  ESXi 5.5 U2

  Network:

  Belkin AC1200 F9K1113v4 Gigabit router

  Computer:

  Sony Vaio i5 2440 M, 8 GB, 5400 RPM HDD

  The main objective of the ESXi server should be used as a NAS, but with the additional ability to run Windows or Linux VM casual as a game server.  I currently have Open Media Vault controls 1 to 4 hard drives in a configuration RAID10 of software with a plugin SMB/CIFS to provide access to the shares through the windows.

  Network management is through the card on board.  OMV uses its own port on the Intel network card.

  The problem:

  Transfers of networks (upload) to my Windows 7 PC to NAS OMV are slow (average 40MBps).  Playback speed (downloads) of SIN is about 100 Mbps, which is decent.  I tested the disk write speed using the hdparm since the console command, and they are all on average 110 - 130 Mbps.  Why is my computer so slow transfer speeds?  Is there a setting to ESXi which limits my network connection?

  Some things I noticed:

  If only I start a computer Windows 7 virtual on ESXi VMNetwork, my transfers from the Windows 7 VM to the NAS VM on average 105 MB/s, while the playback speed is around 90MBps.  If I could get my physical network to transfer at these speeds, it would be satisfactory.

  Can someone help me?

  Hello

  I presume that the OMV is the culprit here. See for example this discussion: http://forums.openmediavault.org/index.php/Thread/5507-Extreme-slow-samba-speeds/

  You may be able to resolve the server Samba inside the OMV.

  cykVM

• Transport area

  Can a cluster include the multiple areas of Transport.

  If so what is the use of it.

  The answer is Yes.

• HP C7000 GbE2c to Procurve networking woes

  Having a few network issues and I would appreciate another set of eyes or the opinion of someone who's struggled with this before. I could not find a guide of best practices using these switches (BNT) HP GbE2c with VMware anywhere, so if there is an and that someone could point me in the direction that would be excellent.

  Currently have a HP C7000 chassis with 5-6 blades all current vSphere to run. C7000 is filled with switches GbE2c in bays 1-2, 5-6, 7 and 8. These switches are each uplink in a Procurve 5308 via a single connection to port 21 on each.

  If the natachasery is organized into vSwitches for redundancy so that they do not share the same integrated circuit or mezzanine as much as possible (each blade has a 4 Port GbE NIC in Mezz. 2) the natachasery map to ports on GbE2c switches that can share that interconnect trunk ports on 17 and 18. In other words vSwitch0 contains vmNIC0 and vmNIC2 where vmNIC0 corresponds to switch Bay 1 and vmNIC2 corresponds to the switch in Bay 5.

  Each vSwitch can be set to active/active or active / standby for the collection of NETWORK adapters and must perform the correct switch configuration?

  If this is the case, the following text makes sense?

  Each vSwitch has two vmnic value active / active/active, if she's not serious (or standby).

  Each vmNIC in each vSwitch maps to a switch that is not in one Bay adjacent to another, then the trunk AND 17 and 18 ports on the GbE2c must be disabled (no interconnection between GbE2c switches).

  Each rising GbE2c to 5308 Procurve and since of the GbE2c have their interconnections to the disabled, there should be no need of junction on the 5308 ports when the uplink of the GbE2c, corrected?

  If that is setup, and each NIC team vSwitch is set on road based on IP Hash and trouble-shooting on the status of the link the vmnic should switch in the event of a failure of GbE2c or the failure of the uplink. Is this correct?

  Thanks to anyone who takes the time to look through it.

  1. network cards can be active/active, and this is how I would create them.  Since there is no channel of port involved, each VM will be able to access a teddy bear at a time and the other can still be used for failover, but still actively allows two network cards.

  2. this hypothesis seems correct, as long as you use the half height blades, otherwise you will need to vmnic0 and vmnic4 for servers blade full height satisfy your mezzanine and mappings on the team.

  3. you should have a trunk between the 5308, at this level, or more in the string, if the 5308 connect Layer2 to a set of basic switches.  Otherwise, you could find yourself in a scenario where a virtual machine is unable to talk to each other if they eventually go out a certain set of physical interfaces.  STP should take care to disable the paths as requires it, but you should consider loop avoidance to the vSwitch so level mechanisms.

  -KjB

• Installation of vmotion when management network and vmotion are on different subnets

  I have vswitch0 which is located on the 172.18.9.x subnet and has my management interface with a gateway of 172.18.9.1 vkernal using 0 and 4 Teddy

  When I create vswitch2 which is on the 172.18.10.x subnet and is for vmotion using Teddy 1 and 5, but the front door must be 172.18.10.1

  It seems that I can have only a vkernal gateway. So I don't I get the vmotion switch to use a different gateway?

  These are my first boxes of ESXi and I've not enabled ssh, so I only have the vi client to configure with.

  You might have a network problem.  Have you tried with just a single teddy bear in the vswitch and used a cross on the cable?  Virtual LANs in use?

• InDesign stops responding when you change the text of the network. Technicians are baffled!

  Recently my InDesign (CS6 running on Windows 7 Pro 64 bit, 8 GB ram) has become almost completely insensitive when I go to open and edit a file off the corporate network. Our technicians have no idea of what is happening and are considering having to re - build my profile as a last resort, as we tried everything.

  A little more of a buton to the problem: when I go to edit a file, InDesign turned off the server it first takes longer than usual to load but finally made. You can scroll through and down the pages, move and resize boxes, place new photos but as soon as you try to do anything based text (edit new text or create a new text box) the program crashes until you have to Task Manager on and kill. It is not a file corupt because if I copy the directory of the file with all the links on my computer hard drive the file works quite well, it's only when editing on the network and when edouble clicking to edit a text.

  What we have done to try to resolve the problem:

  • Reinstal InDesign - no effect
  • Deleted preferences (shift + ctrl + alt + windows key on InDesign startup) - no effect

  Our technicians tried to edit my profile nothing helps registry, and we are all completely at a loss of what is happening. There are several other instances of the program within the company (especially versions 5.5 and one other 6) and they work all files fine edition directly to the output of the network.

  Someone has an idea of what it could be, such a specific problem being only when you're editing text base areas? Technicians do not want to have to re - build my profile because there is a lot of back-end to do to be able to restore immediately.

  Thank you very much in advance for any light on the issue

  So have finally solved us the problem and are currently cracking on the Champagne!

  It turned out to be the network path shortcut I used to access the shared drive where I just change the files to. I work for a restaurant so we have a shared drive where each site can access their files, it's where the food menu files and I had created a shortcut, although accessible the zone made him using a path that had a double backslash in it.

  The true path for the shared drive is \\hm\mydocs\restaurant\menufile.indd and it is the shortcut I used to open the file of. For all other files such as Word, Excel, even other programs like PSE10 and Lightroom Adobe it seems to work correctly. For some reason any InDesign dislikes this path with the double backslash in. As soon as I changed the path of the shortcut to just m:\ (the letter of the drive shared on the network), everything worked again and we can all sleep, he drove us mental. Reinstalled windows, InDesign creates a new network user profile works.

  I hope this can help someone else in a similar situation in the future

• 2 two IP address are reported to use my home network and both are reported to be in the same IP addresses. I have computert that one and only one account with the provider.

  My computer is to launch my a note that I have another computer on my network using the IP, I do not understand.

  I have a stereo Kardon Karmon, a drive Sony DVD with WIFI and a printer with WIFI. 2 mobile phones and that's it. All meant to share my home network. The dvd player will not acquire the web well that directly connect to the modem. I did not any changes for several months.

  RA

  What is wifi has an IP address.  This situation occurs generally if the INVESTIGATION period have the value static or more likely in your case that the whole of the network (including the router) need to be restarted.  Usually if you restart all devices at the same time it will erase it

• Drivers to be used on networked computers that are not directly connected to the HP Laserjet M1536dnf MFP

  Hi, I had problems connecting to computers on the network for printer. The printer is HP LaserJet Pro M1536dnf MFP. The computer that is connected to the printer directly via USB is fine. I downloaded solution complete driver installation on the site of hp, them and everything's fine. the problem is with the computers on the network, they cannot detect even the computer to add printer. And I have enabled file sharing and printer sharing advanced options of sharing on all computers. I also tried to install the same drivers I used on the local computer on the network computers, but its does not work. Please kindly advise me on which particular driver should I use or the solution.

  for this one, there was a simple solution... I forgot one small thing. After the installation of the complete solution from hp printer drivers on the computer connected to the printer via the usb port you then go to control panel > view devices and printers > click with the right button on active printer installed > printer properties > sharing > click on the list to the Director. that allows other computers on the network to view the printers.  was a bit stupid coz the solution was so simple.