ProCurve 2610

Similar Questions

• Photosmart 2610: Photosmart 2610 All In One

  I recently had to reinstall my HP Photosmart 2610 all-in-one.

  I have the software comes from www.hp.com.au and installed it.   At the end of installation, I've set up and the printer print a sample page.

  When I went into settings it has shown that a Photosmart 2610 printer has been connected to the PC >

  However, when I try to print anything I get redirected to the "Send Fax" page, and the document will not display.

  Help!   hehehe

  Phil

  Try to reinstall the software, use thislink to dnload the driver full features and software.

• Photosmart 2610 referee

  I have a photosmart 2610 all-in-one it works perfectly fine when I connect through my usb cable. the only thing is that I have 3 computers at home and who are used mainly for school work.when I arrived to my printer, everything has worked until recently collapsed when answering my network connections...

  When I look at my settings my ip network, the subnet and the gateway is all 0.0.0.0? OK so I thought that I add them manually and see what that dose... nothing to get all rest to 0.0.0.0... I am a network restore but still nothing happens! I print a config and everything is in the "off" mode. I'm not sure how to turn on the State of the network.

  IM on a XP pro SP3 with all latest updates for XP and HP software and firmware.iv got 3 other devices connected to my router which works perfectly fine, so I know theres nothing wrong with that.

  for any help or suggestion would be greatly apperciated!

  The Photosmart 2610 has no of wireless, which was a feature for the Photosmart 2710.  Go to settings, 8, 3, 2, OK, 2 and set the IP address, mask and gateway.

  Kind regards

  Bob Headrick, MS MVP printing/imaging

• Satellite 2610 and Bluetooth

  I would use Bleutooth with my 2610 Satellite to connect it to a PC bought recently with Bluetooth already installed on it to a network.
  Is this possible?
  Which adapter (PCMCIA or USB adapter card?) what I need to buy for my 2610 Satellite and it works with Windows ME?

  Hello

  to get the right Bluetooth option, look here: http://eu.computers.toshiba-europe.com. Click on "Product catalog" and "Options and accessories. You will find "Communications". Search for "domestic product". You will find "Bluetooth Module Kit".

  Have fun

  Good bye

• Comparable to HP photosmart 2610 ink cartridge

  Is there a comparable cartridge for the HP photosmart 2610 printer all-in-one.

  I have always used the 96 cartridge which is expensive

  Panda4

  The HP SureSupply site indicates the cartridge HP 94 black is also compatible with the Photosmart 2610.

• Need drivers for dvd Satellite 2610 (PS261C-1KKK6)

  Hello everyone, I have a laptop, but it is a very old model:

  Toshiba
  2610DVD/6.0 system unit
  Model PS261C-1KKK6 number

  I am looking for the drivers, I need to install it, please, someone help me!

  Hello

  You can find the drivers here on the European driver Toshiba page.
  The laptop is an oldie so that the drivers are located in the archives.

  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Simply choose the Archive instead of portable product type.
  Archive->->-> Satellite 2610 26xx Satellite Satellite->.

  See you soon

• my all in one 2610 printer is not compatible with the imac using Yosemite

  my HP all in one printer 2610 does not seem to be recognized by my new imac and I kept problems so uninstalled. Now, I want to try and reinstall it, it says that yosemtie does not support PC applications. Is there a way around this or do I have to buy a new printer? If I can anyone recommend a good that is compatible with my iMac?

  We invite you with pleasure!

  Scanner failure indicate a hardware failure of the bulb scanner, such a harware failure is likely to prevent other features like the all-in-one device is based on one of its components and the device is ' t ready to process a print job.

  Follow these steps to disturb such a, if the question is I'm afraid, maybe it's time for a new printer:

  http://support.HP.com/us-en/product/HP-Photosmart-2600-all-in-one-printer-series/391114/model/391116/document/c00587971/

  Kind regards

  Shlomi

• Satellite 2610 CDT: what is the maximum capacity of hard drive?

  Hello

  I want to add a new hard drive to an old laptop Satellite 2610 CDT. However, before buying a new drive, I want to be sure that it will be properly recognized by the BIOS. The operating systems (Win 2000 and Debian) I will use can handle large capacity disks, so that they are not a problem here.

  How can I determine the maximum capacity of the hard drive that will be recognized by the BIOS? The BIOS supports LBA-48 address?

  Thank you very much!

  According to the specifications of the laptop computer supports a 6 GB HARD drive.
  You can try with 10 or 12 GB of HARD drive.

  These hard drives are cheap and I don't see any risk with the upgrade. Test it!

• Under Win7 Pavilion w HP Photosmart 2610 has-in-O. HP ground Ctr cannot find the scanner

  When I try to scan from the HP on my Photosmart 2610 Solution Center, the dialog box says can'r find the scaller because my device installation is not complete.  I've never had this problem before and can not solve even try to download new drivers.

  Hey CC22. Have you tried running the doctor printing & scanning HP? This tool may be able to solve your problem automatically. Try it and if she doesn't post comes with new details and we'll go from there.

  Thank you

  Sean

• Photosmart 2610 yellow color will not print

  My Photosmart 2610 is a pig.  She refuses to print Yellow.  I went through several routines clean and preferred and changed the cartridge for a new brand, but nothing raises any dribble of yellow.  Any help would be appreciated - thanks.

  I would gently pat dry the printhead on a damp cloth.  A working cartridge will have a strong task of cyan, magenta and yellow.  I suspect that your cartridge will show only cyan and magenta.

  In this case, there are a few things to check.  Are the original HP or reman cartridges / filled?  The latter usually have poor quality, see the study here.   The other possibility is that the cartridges are original HP but outdated.  There is not all "expiry" on these cartridges that might lead to print does not correctly after a certain date, but very old cartridges may have failures in one or more colors.  Check the end of warranty date (two years from the date of production) as indicated in the paper here.  This date is also usually printed on the lower right front back the package.  If the cartridges are very old and well beyond the end of warranty date, this is the likely cause.

  As a temporary measure, it can help to soak the cartridge in about 1 "of very hot water for about ten minutes, with the nozzle to the bottom plate.  Remove the cartridge and gently dry the electric contacts with a lint free tissue and try to print.

• All-in-one HP Photosmart 2610: I can do for my (old faithful) Photosmart 2610 work with Windows 8.1?

  I've recently upgraded to 8.1 Windows I don't have an installation disc for my (old faithful) 2610 Photosmart All In on 64-bit and I wonder if someone can tell me a way to 'get' my computer and printer to work together again.

  Dear verve1,

  Here you have the complete software you multifunction in point 8.1 of Windows Installer:

  http://ftp.HP.com/pub/softlib/software12/COL30951/MP-110188-2/AIO_CDB_Net_Full_Win_WW_140_408-4.exe

  I hope you find it useful.

  Greetings.

  * I am not an employee of HP, my work is voluntary.

  If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

• Vista/Windows 7 Patch for Officejet 7210 7310 7410 and Photosmart 2610 2710 Duplex

  Some models of printer with automatic duplexer print not correctly on the back in Vista (or Windows 7 if Vista update).   In these models on the back is printed updside down regardless of the driver configuration.

  attached the zip file has a patch and instructions to fix this problem for the following printers:

  OfficeJet 7210

  OfficeJet 7310

  OfficeJet 7410

  OfficeJet L7300

  Photosmart 2610

  Photosmart 2710

  Patches for other models can be found here.

  This patch has been tested good, with more than 1,800 copies of this fix distributed by e-mail since April 2007.

  The zip file contains two files

  OJ7410.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpo7x00t. GPD is the current patch file.

  To apply the patch download the here attached zip file.  Extract the files in the %Temp% directory, and then open the OJ7410.pdf file and follow the instructions.  If you have trouble finding the folder directory you can find this directory by opening your 'computer' folder and type folder in the address bar.

  tomscnorth wrote:
  Windows 7 driver is not automatic duplex printing. "The options are manual, or a booklet * two or more pages per page. How can you print a page by on the side of double-sided automatically?

  In fact, the driver of Windows 7 made good automatic duplex printing - no patch is required for Windows 7 [edit - this is true for fresh installation.  For the versions of Vista the patch may be used for Windows 7].  The default value for some printers, is that the duplexer is 'not installed', please check the Duplex Printing Troubleshooting Guide for Vista.  In Windows 7, the procedure is slightly different, in the folder printers click twice on the 7410, double-click the icon 'Customize your printer', device settings and under installable options go "Duplex for two back" on installed, OK.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• I need to replace the keyboard on a laptop Pavilion dv 2610 us. How can I get the old one?

  Have notebook Pavillion dv 2610 us.  You need to replace the old keyboard. How to get out?

  Hello

  "Maintenance and Service Guide" from the following link will show you how:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&document=&product=3559261

  Kind regards.

• Series of HP Photosmart 2610 all-in-one, print only in black and white

  Series HP Photosmart 2610 all-in-one (printer, fax, scanner, copier)

  Model SDGOB-0304-01

  Windows 7 32 bit

  I have changed black only, now cannot retrieve colors. Forgotten what I've done, so any help appreciated.

  In the printing preferences: -.

  1 Advanced color settings set to '0 '.

  2. choice of color - print in grayscale - 'unchecked '.

  3. within the framework of advanced document - print all text in black: (disabled)

  These measures appear to be in place. Have you, you click on apply after you have changed these settings.

  You can try uninstalling and reinstalling the software and drivers. This will reset all back.

• HP ProCurve 2920 - 48G: HP ProCurve 2920 - 48G with the issue of SFP

  Question: With copper connected between the two baskets on 20 Port (VLAN2), I have was ping another basket. But when we restart the switches with fiber Port 45 (VLAN2) instead of the cooper between two baskets, I cannot not ping another basket. Both switches HP report their 45 Port "Port State" as UP. Also tried combinations of the trunk (with Trk1) and flow control to the two switches, but no change.

   

  Rack A Rack & B;

  HP ProCurve J7928A SFP J4858C equipped port in port 45-48

  -VLAN1 untagged 1-15

  -VLAN2 untagged 16-30 & 45

  -VLAN3 untagged 31-44

  -Ports 1-44;

  -Type: 100/1000 t

  -Mode: Auto

  -Frother: disabled

  -Distribution limited: 0

  -LACP Status: Disabled

  -Type safe: no

  -Group master: no

  -Port45;

  -Type: 1000SX

  -Mode: Auto

  -Frother: enabled

  -Distribution limited: 0

  -LACP Status: Disabled

  -Type safe: no

  -Group master: no

  Cable;

  -2 x Orange fiber Multimode

  Hi, I made a household of VLAN and put 45-48 ports in the same VLAN, and it pings another grid very well now. Weird why SFP ports needed to be together.