HP C7200 PRINT CANT NUMBER OF ODD PAGES (so that double-sided printing)

Similar Questions

• How to disable double-sided printing on HP jet Office 6700

  I just bought a HP officejet 6700 premium for my iMac computer. I also installed Microsoft for my iMac. I don't want the duplex printer forever. I tried going to system preferences / printers, etc. and it directs me to the Web site of the printer. From there I can't find a way to change the default to double-sided printing to 'off '. What impression in Word, select print and then show presets, and it is said that double-sided are turned off, but still, it prints double-sided. I also tried to register a new printer with printing double-sided as off and it still prints double-sided. I also do not know how to change the default setting on the printer. Any help would be greatly appreciated.

  Hi crayric,

  We gladly invite you.

  The above information refers to Mac OS X, however, I included the steps for the latest versions of OS X (10.7 or 10.8) because you did not mention the version of your operating system.

  If you have an earlier version of the OS 10.6 or 10.5, you may need to click the icon shaped triangle next to the name of the printer to spend the print settings in the print dialog box.

  For any question, please specify your exact OS version (you can find that out by clicking the Apple icon, then the about this Mac, also well let me know the exact Office for Mac version installed on your Mac (2004, 2008 or 2011).

  Shlomi

• How to print double-sided in In Design when certain sections have an odd number of pages?

  I'm new to In Design and I'm doing something that seems pretty basic and the difficulty in finding ways to do it and I have not found anything in the Adobe Forum or online that responds to this situation.

  I'm working on a document that is divided into sections, with page numbering starts at Page 1 for each section.  I have mirror image layouts for odd pages and even masters - for example, the page number is on the left on even pages and to the right of the odd pages, as you would expect generally to see on a double-sided print, where in a workbook or a workbook, the even-numbered pages are on the left and odd pages are on the right.

  
  

  I print the document from my computer to a printer that supports double-sided printing.  I don't see any option in the file / print window to two face impression, so I put this option on the printer itself by using the [Setup...] button at the bottom of the window.  It works - I'm printing on both sides of sheets of paper.

  For the moment, the first section is 3 pages (two blocks spread with the first page, one with the other two).  The next starts of section by number 1 on the third page spread (one page) and continues then a two-page spread - as expected.

  That is the problem - the first page of the second section is printing on the back of the last sheet of the first section, rather than on a new sheet from the front - so when I put it in a binder, the odd pages are on the same pages on the right and the left.  Whenever I have reached the end of another section with an odd number of pages, she rotates on itself again.

  There is a workaround solution manual I found - browse the document and add a blank page at the end of each section that has an odd number of pages (and check "print blank Pages).  But I have to do every time I feel that I am adding new pages and add/remove blank pages the number at each change of sections.

  I can't believe that In Design does not provide a way to make this work correctly, I'm sure a lot of people have had this same situation, and I hope it is something simple that just, I have not been able to understand...

  Help! (Thanks!  B ^)

  Frankly, it's a feature of the years, I tried, and I expect a professional page layout application to have. Something on the order of "duplex respect page layout." It would be very useful when printing only part of a document that happens to start with a page of pairs.

  I do catalogs in the sections, and each section begins with a left page. When duplex printing a section given, I must print this page first separately and duplex then the rest. Kind of pain and should not be necessary.

• Print double-sided of odd number of pages

  I have Adobe Reader 10.0.2 instalied on my iMac Mac OS with a Canon Pixma iP4200 printer 10.6.7. Since the installation of this version of the player I came across a curious problem with PDF files print double face with an odd number of pages.

  For example, a three page PDF printed double-sided file. The first page prints first, then pages 2 and 3 are printed double-sided. This leaves a blank page on the back of page 1 that is INCORRECT and was intrigued. Standard double-sided printing should have pages 1 and 2 back-to-back and page 3 with a blank page on the back.

  All my other software on my iMac prints only odd numbered file double face properly. It's only the 10.0.2 player who has this problem and would like a solution.

  I found a bug in the player software?

  Concerning

  Stone AKA DaftBrush

  If you google "Adobe report a bug" is the first hit, you get:

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

• Automate printing odd pages with page 2

  I want to print all the odd pages with page 2.

  In this order, 1,2,3,5,2,7,2,9,2,11,2,13,2,15,2,17,2,19,2,21 etc.

  Basically, 1,3,5,7,9,11,13,15,17

  And insert a 2 between each of them.

  Can do it with GREP - not a practical solution in the long term.

  Someone at - it a clever way to do this in Excel?

  Eugene,

  Do you mean you want a formula with an Excel file? Like this:

  

  For example, I want to print pages 1 to 57. Then I select the B-29 cell and copy it!

• OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards.

  OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards. How to change so when doc is printed can be read like a book?

  I don't know where to find and change settings.

  can you please help?

  Thanks in advance

  Anna

  Anna

  There should be an option in layout to "Flip on long edge" or "return on the short edge.  Change this setting to change the orientation of the back page.

  If this does not resolve the problem that, please indicate what operting system you have and the number of exact model.

  

• Ghosts on pages double-sided printing second on Officejet 6700 Premium e-all-in-one

  Please can someone help?

  Printer name model e-all-in-one Officejet 6700 Premium

  Firmware MPM3CN1232AR

  Software 028.000.1315.000

  Driver 09.84.00.1173

  Win 7 SP1 64 bit

  Wired ethernet connection

  Problem

  On two-sided printing, the second side of printing on all pages is ghost. This is in particular the noticebale on verticals.

  This is true for all the qualities of printing on any documents .pdf or. doc.

  I use all the HP printing paper and original cartridges.

  I aligned the print head and checks suggested on the help pages.

  I contacted HP support, which were brilliant and replaced the printer and the duplex unit.

  They suggested that it was because I was using Office 2003 SP3 and Windows 7 but I find this problem on too but not in Wordpad v6.1 .pdf files

  The problem does not occur when scanned or copied documents are printed

  Is there a solution out there on this new printer please?

  Hi 007OHMSS,

  I carefully read through a VionAiry pointer to the post of ItalSanif with links to more articles.

  There were two main suggestions as to how to proceed. I didn't uninstall the "bloatware" and back to base for the HP Officejet 6700 Premium drivers, but I installed the drivers from the series HP Deskjet 6980 in accordance with the procedure at this link http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-7510-Duplex-Problem-y-axis-scaling/td-p/1754773 and listed below, with a few mods to include activation of unit duplex in one set of instructions.

  And you know what? This MARKET! Ghosting on the second side of all pages printed double-sided disappears to be replaced with a nice crisp clear impression. At present, all the other functions, including scanning seem not affected and function as usual, although of course the new driver (HP Deskjet 6980 series) makes the leaves of different properties.

  In my environment, I have also 3 XP machines in network connected wireless to the printer via the router and the PC Win7x64 connected by ethernet to the same router. Meant this download and the installation of the driver HP driver the HP Deskjet 6980 series for the XP PC Web page not the Win 7 x 64 because they were not present.

  I modified a bit routine and reproduce it below to help others. A/c for the original post, that was provided by the HP Technical Support. Why nobody's support services seems to know about or drivers have not been fixed I would never know.

  First turn off you will want the printer already available on the computer before you continue.

  For Win7 PC (XP is similar but not identical)

  1. Go to Start -online device and printers => then click on the "Add a printer" button in the upper left corner of the device window.
  2. Click on the button "Add a local printer" (choose this option if you do not your configuration)
  3. Check the box "use an existing port.
  4. On the drop-down list, select the option for example CN115130TP05JW , but use the correct name for the PRINTER port which is the serial number of your printer (do not use the fax entry)
  5. Now in manufacture of list on the left, select "HP".
  6. On the list of Printers to the right, select "HP Deskjet 6980 series (HP)" "
  7. "Once the pilot moved to enter in the" 'devices and printers ' window and right-click the newly added "HP Deskjet 6980 series" and select ""printer properties ' on the drop-down list. "
  8. Go to the "Advanced" tab, and then in the drop-down list next to the label of "Driver" select "HP Deskjet 6980 series.

  9. Click on the button 'Apply' - the configuration window should change it's shapea bit.

     10. in the HP Deskjet 6980 window properties, click on the tab "device settings" on the top of the window.

     11. in the list of parameters, search for "Unit duplex (for printing on 2 sides) ' and select it.

     12. once highlighted, select in the drop-down list ""Installed "; "

     13. When finished press apply

     14 now, go to what you use to print documents and select "HP Deskjet 6980" as your printer. Activate duplex printing and you should see the pages to print correctly.

  15. you can also change the name of the printer in the "Général" tab I changed it in mine to "HP Officejet 6700 with HP Deskjet 6980 pilot set shadowd duplex printing".

  I had a little problem in that, for some reason any in the document (e.g. Word / etc\ .pdf) box under the effects tab my radio button has mysteriously been on 20% until I changed it it was hard to see that there was no ghosting dialogue printer properties.

  So after complete 1 reconstruction of the printer of the original with the parts sent to HP services support for November 2012, an escalation at magnifications greater within HP (no answer) and a new printer of A...n, VisionAiry has pointed me to a solution that I had tried with DJ 450 drivers, nothing works, after a Shane_R post dated last year.

  So thanks to you and also to 007OHMSS who worked on this problem and original posters

  All I can say is that it worked for me and I am so grateful to everyone on this forum to ensure that I am sure of my eyes and mental health, looking more printed duplex printed with a shadow/ghosts and to be what they were not prepared.

  Congratulations so all round and thanks again

• DeskJet 3510, it can print double-sided pages (manually is fine)?

  It is a brand new printer, just bought today. I printed a few pages with it until now, but looking at the print settings, I see nothing for two-sided printing. My last printer, a PSC1315, had a way of doing it; It would print the odd pages and then I could return the battery and it would print the odd numbers (or maybe it was the other way around, but basically the same thing). I didn't need to do much, but when I made this option has been really helpful.

  I have another thread goes here with another question, but I can end the same way: am I missing something, or is two-sided printing, even manually, there is simply not possible with this printer? And if not, does anyone have suggestions for how I manage this mine? I don't see even a way to print only odd or even pages.

  My OS is Windows XP Pro SP3, 32-bit. Thanks in advance for your help.

  For this problem, you have to manually flip and feed each page so that it is 'in duplex. However printing of even/odd, I think that you receive to your second question, is in fact a question of the program that you are using and if it allows pages to print in that order.

  For example in 2012 of MSWord, when you are on the print page there is an option directly under settings that allows you to print the odd pages. It's the kind of solution that works better for the printer.

  I wish you a wonderful day!

• Identification of even and odd Page

  If possible, I need help please,

  Here is a script so resolute, simplified to show the basics I adjust to operate at a complete script.

  This script is totally insufficient, but I have no idea how do work, if the page is odd then alert 'Odd Page', and so even then alert 'Same Page'.

  pgNum = app.activeDocument.sections [0] .pageNumberStart

  If (pgNum == 1) {alert ('odd Page')};

  ElseIf (pgNum == 2) {alert ('same Page')};

  Must be running on unique Pages (and not facing Pages) so cannot use the 'PageSideOptions.RIGHT_HAND' or 'PageSideOptions.LEFT_HAND '.

  Thanks a lot for any help, Brendan

  Hi Brendan,

  According to the doc, the Section.pageNumberStart property is "valid only when continue the numbering is false," then you must rely on Section.pageStart instead.

  Now, given a Page, you have two useful properties,

  • Page.Name is a string that is the name of the page, which means usually only the page number (but it depends on the Section.pageNumberStyle.)
  • Page.documentOffset is the sequence of the page in the document index (while Page.index is the index within the spread, not relevant here.)

  Assuming that Page.name is correct for your project, simply interpreted as a number, then, to check if pgNum % 2 is 0 or 1.

  var pg = app.activeDocument.sections[0].pageStart,
      pgNum = parseInt(pg.name,10),
      side;
  
  if( isNaN(pgNum) )
  {
      alert( "Page name can't be parsed as an integer." )
  }
  else
  {
      side = (pgNum%2) ? "Odd " : "Even ";
      alert( side + " Page" );
  }
  

  @+

  Marc

• How to export only odd pages / pair only in PDF format

  I finished a press work whose copy was only on odd pages with a design on even pages (even on pages anyway). After that it was complete, the client decided they wanted a copy with only the odd pages to display on a screen at an event. I was looking for a way to export a PDF of only odd pages, but did not find. It was easy to do with printing in PDF format - here I could print only odd or even pages, or just not to print blank pages (after the removal of the content from the master page even side). Here, I learned that you should always use export instead of printing in format PDF - is - it possible (easy) to accomplish this task with export?

  Here is a link to an effective method to clear unwanted in Acrobat pages:

  remove multiple pages at the same time (change the PDF)

• How can I "Print booklet" with just strange pages and even copy double-sided. . options disabled

  I have InDesign CS5.5 on a Windows 7 64-bit machine attached to a Xerox 7750 printer.  I created a portrait 8.5 x 11 paper and trying to create a booklet on 12 x 18 sheets.

  I need manual duplex printing and so I need to print only the "spreads" weird and then the "spreads".

  I printed in Adobe PDF format and printed my created PDF file and have it work, but I want to know why InDesign doesn't let me do.  When I click on "file > print booklet > Print Settings ', and then it displays the dialog box to print the Pages section, which includes the sequence that normally would allow me to do the odd Pages or even Pages, but it is disabled.  Why?  I can define print presets and I choose odd Pages, but when I choose that Preset area it shows nothing, everything is always disabled.

  Anyone has any idea why it is disabled?  Is it my printer driver?

  You are doing the right thing by printing to PDF and manually duplexing it.

• Help! Change to purge/margins of the even and odd pages in the same file?

  I'm outlining a children's book and the printer requires domestic files to be submitted in the unique layout (borderless). The binding margin side and bleed is different from upper, lower and the outer edges - essentially the pages reflect each other. How can I set up the document so even pages have a configuration option and odd pages have the mirror settings (without lining up as faced with pages in spreads)?

  When you make the book use facing Pages in the Document format. This will give you the Master Pages to a mirroring, called "facing pages".

  When you make the PDF using file > export and choose PDF but do not check the option 'Spreads '.

• Printing double-sided Pages using pages

  How can I print duplex using Pages pages?  (My printer is able to offer this option, but Pages does not have this option).

  The ability to print duplex (double-sided) is in the OS X Print Panel, not in the Pages. File menu pages: print... and adjacent to the copies window is a box for double-sided. Then you decide to select the layout, how these double-sided pages should appear: binding edge (default) Long, or short edge binding.

• double-sided, two pages per sheet printing.  Finally, there are two pages side to the bottom.

  I would like to print double-sided with two pages per side in order to return to the page (as if it was required on the left side of paper).  This means that orientation is the same on both sides of the paper.

  power out put, is that the back of the page's side to the bottom.  (as if I wanted to just staple the documents on the upper left)

  Is this possible without going into PDF documents and manually turning every 3rd and 4th page?

  (I have a Brother HL-2270DW with the lit duplex.  I have the latest version of the driver.   OSX 10.11.1)

  You may need to change the printer to "Long Edge binding" setting to "short edge binding." My printer Brother (different) this setting is on under page setup in the print dialog box.

• Double-sided print second page upside down HP6700

  When I print 2 Facer, the second page is upside down. I looked for solutions on this forum and on the net, but nothing helped. I have installed new drivers, checked all the available boxes. The one I need ('turn page' or something like that) is not found.

  I have a new HP6700, to replace an old HP6700 which made duplex very well, but became old. Why is it suddenly so hard to make something of my old printer without problems?

  I use a MacBook Pro with OS X 10.9 laptop.

  I hope someone can help me.

  Hello Cheetah12,

  Thanks for your reply. In the meantime I discovered that the most important step is NOT to install the printer via AirPrint, but using HP6700. Only, then you have the possibility to click on the duplex option and install the printer with the 4.1.2 pilot.

  The solution mentioned by Roger2499 in the following thread has helped me tremendously, after a day of frustration!

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/double-sided-printing-with-6700-e/TD-p/3476773

  Thanks for trying to help!