HP Compac 8200 Elite: Lack of communication Simple PCI driver Code 28

Similar Questions

• H P 1426: network controller and the controller of Communication Simple PCI driver does not install

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1426103C & REV_06
  PCI\VEN_8086 & DEV_3B64 & SUBSYS_1426103C
  PCI\VEN_8086 & DEV_3B64 & CC_078000
  PCI\VEN_8086 & DEV_3B64 & CC_0780

  PLS help me to find the driver for my hp laptop.

  I tried to install the drivers but still has a yellow exclamation mark in Device Manager.

  Thank you.

  Hello

  Please try:

  Broadcom Wireless LAN Driver for Microsoft Windows
  
  Driver Intel Management Engine Interface (MEI) the 4th:

  Installing a second before the premiere.

  Kind regards.

• Dc7700 computer. Error COmmunication Simple PCI controller in the Device Manager there is an error.

  Just installed Windows 7 64-bit.

  Simple properties Communications controller PCI hardware ID is

  PCI\VEN_8086 & DEV_2994 & subsys_2802103C & REV_02

  PCI\VEN_8086 & DEV_2994 & subsys_2802103c

  PCI\VEN_8086 & DEV_2994 & cc_078000

  PCI\VEN_8086 & DEV_2994 & cc_0780

  ...

  What can I install to get rid of this warning on my dc7700 computer.

  The simplest method would be to disable it in Device Manager.

  This device is the plain old telephone modem (POTS). Most of the people do not have to do this. If you need it below, this sentence

  The drivers are available here. Select your version of Windows 7, download the driver and install it.

• 15 - ac128ne: communication simple pci

  difine the commcation cant simple pci

  15 - ac128ne

  Windows 10

  Code 28

  Hello:

  You need this driver...

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp74724.exe

• Need Driver of Communications Simple PCI for my Satellite L635-113

  I need PCI Simple communication driver.
  Model: Toshiba Satellite L635-113
  Operating system is Windows 7 Home Premium 64-bit.
  Additional information: Vendor ID: 8086: 3B 64 device ID

  I wish a response with a smart solution. Thank you.

  To be honest I n know not that you lack exactly, but if you have installed the own operating system download and install all the drivers (modem, LAN, WLAN) communication Toshiba support page.

  More info might be useful.
  Do you use the clean install of the OS?
  You have already installed all the necessary drivers?

• HP 650: Communication Simple PCI controller driver

  Hello... I can't find a driver for PCI Simple Communications Controller in my 650 HP notebook... can you pls help...

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1858103C & REV_04
  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1858103C
  PCI\VEN_8086 & DEV_1E3A & CC_078000
  PCI\VEN_8086 & DEV_1E3A & CC_0780

  Thank you.

  Hello

  Should be the engine of the IMEI on the following link.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5225013&swItemId=ob_104656_1&lang=en&cc=us

  Kind regards

  DP - K

• Communications Simple PCI controller AND Port series PCI

  HI dear all,

  I installed windows XP SP3 in HP Compaq Pro 6300 microtower, but I can't find two drivers

  1 PCI Simple Communications Controller

  2 serial Port PCI

  Please send me the link of the drivers

  best Regadrs

  Shams

  You desktop is a professional PC. This is the forum of products HP language English world consumer.

  You questions would be better served if published in the forum HP Enterprise Business.

• HP compaq 8200 elite sff: Add the second hard drive to 8200 elite sff

  I installed a second hard drive, but the system does not reqagnize it.  I connected the blue sata port.  Any help?

  Well shit, now I have to retype my response... I typed in Notepad, but it seems that I can't copy and paste into this box.

  I agree with DFBonnett, the second disc will only work on the BLACK, not BLUE light connector.

  The way I Win-10 to see the second drive was to go to the management of the computer, and then under storage, click Disk Management: the drive is presented as a disc 1 but not show the program explores until I received a letter from the disk drive... MAGIC, the player will now display as the letter assigned to the I gave him 'E' with a backup label.

  I tried what erico posted but has not worked, but I thank all of you who have tried to help.

  I give credit to Umbutu, he saw the drive without having to do anything myself.

  Hey Microsoft, look at what Linux can do... lol

• HP presario cq43: communication controller pci simple

  Hi guys, can someone help my find the driver for the controller of communication simple pci?

  the hardware IDS are

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_3672103C & REV_04
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_3672103C
  PCI\VEN_8086 & DEV_1C3A & CC_078000
  PCI\VEN_8086 & DEV_1C3A & CC_0780

  Thank you...

  Hello:

  You need the driver for this device...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96666-2 & CC = US & DLC = in & LC = on & os = 4063 & productOid = 5095726 & sw_lang = & Product = 5095725

• PC HP Compaq 8200 Elite CMT: Replacement of the SSD HARD drive and Recovery Options

  I have a PC HP Compaq 8200 Elite CMT I went recently to drive HARD original for one SSD of 850 Evo from Samsung using Samsungs cloning/copying software. Everything went well and the PC is in use today. I do not see the partition D: Recovery on this machine more well, so I think this has not copied or was lost. I still have the disk that was replaced.

  I was wondering if there is a way to replace HARD drive like this with an SSD and everything by keeping the system recovery feature that was on the HARD disk, and if a set of system recovery disks of before installing SSD would continue to operate, or if I need to create new ones, and if I CAN create new ones.

  rgoodrich

  I did what you want to do (for example, to replace a disk with a DDI) and was able to retain the function of HP recovery - but it's because of two important facts.

  First of all, I used a DDI with the same capacity as the original HARD disk.  This is important because if you use a smaller SDS, the HP recovery feature will no more work as a reset begins with reformatting the drive and recreate the original scores - which will fail if the disc is too small.

  Second, I use Macrium Reflect product to 'clone' the HDD to the DDI, which means, he made an exact copy of the partitions on disk on the SDS.  So, when I swapped drives, the PC restarted without any problem.

  People have posted here on the use of the software from Samsung, and they seem to have problems restarting after use and (apparently) with successful copy from disk HARD original in the new SDS.

• Division by zero weird problem on HP 8200 Elite SFF

  Greetings,

  I posted my message here, it appears now that my problem is hardware specific.  My machine has the following specifications:
  
  HP Compaq 8200 Elite SFF
  Intel Core i5-2500 Duo @3.3 GHz processor
  8 GB memory

  Windows 7 x 64

  (I can provide more details if necessary)

  This has been me puzzled for more than a week now!

  We have an application where we lack in a division by zero. That request is deliberately built to raise exceptions in this case, with a call to the function _controlfp_s for edit masks on floating point exceptions.

  Now, when you run in a division by zero pretty much all of our machines, Visual Studio 2005 debugger breaks in the right place in our source files. However, on this machine, the location of the break is in every sense and seems to be unrelated to the real cause of the failure. So as a test, I built a simple win32 C program with just the following lines of code:

  int main (int argc, char * argv [])
  {
      float temp1, temp2, temp3;
      unsigned int control;
  
      _controlfp_s (& control, _EM_UNDERFLOW + _EM_INEXACT, _MCW_EM);
  
      Temp1 = 1.0;
      Temp2 = 0.0;
      Temp3 = temp1/temp2;
  
      return 0;
  }

  On all these 'good' machines, the code breaks when the temp3.  Among the other machines tested successfully, I had various hardware and operating systems, including Server 2008 R2, Windows XP x 32 and Windows 7 Pro x 64.  However, on this machine, the code stops at:

  C:\Program Files (x 86) \Microsoft Visual Studio 8\VC\crt\src\tidtable.c

  function:

  __set_flsgetvalue()

  In reviewing the records I have change the assembler code, everything seems fine until I hit the "ptsps" statement... then all records seem to be messed up (vs research as expected on a good machine). When comparing the stack on the good vs. bad, I also see entries of pile on the wrong machine, I don't see a good...

  Now... Here's what I did to solve problems:
  1. a disc image of the original disc HP on a hot spare and the original picture restored.
  2. only installed Visual Studio 2005 Pro - portion of C++.
  3 - tested above, code has always failed.

  4 - update all service packs Windows and tested above code.  Failed.

  5 - update all service packs, the Studio 2005 and tested above code. Failed.

  6 uninstalling all the bloatware and tested above code. Failed.

  7 - updating the BIOS and firmware and tested above code. Failed.

  8. install Visual Studio 2010 and tested above code. Failed.

  Then... I decided to take my spare disk image and install it on a similar, but a little older HP computer that we have, which has the following specifications:

  HP Compaq 8000 Elite SFF
  Intel Core Duo E8400 #3 GHz
  4 GB memory

  I went through the process of installation very well, even though she used the typewriter 8200 recovery partition.  On this machine, I simply installed the operating system and Visual Studio 2005 Pro - portion of C++.  No service packs not whatsoever (even if the Studio 2005 requires an update for 'vista') and the code worked as expected!

  So, that leaves me about almost everything but the material!  Also note that I tried to disable several processors and all optimization of the BIOS on the 8200, without success.
  
  I don't see anything else I can try... Please help!

  Wow!

  After the posting of this message to a friend... He found a document showing very similar symptoms on some of their CPUs from intel... I then found the exact document who applied to our specific processor (intel i5-2500) here:

  http://www.Intel.com/content/dam/www/public/us/en/documents/specification-updates/2nd-Gen-core-desktop-specification-update.PDF
  
  See Erratum BJ1

  This article describes pretty much exactly what I run into!  (Seriously), I never thought this would be a problem at THIS level!

• 8200 elite format microtour, need of care technique for card mother/PSU

  Hello.

  I'm upgrading of the power supply in my Hp Compaq 8200 Elite format microtour.

  The /PSU motherboard uses an archaic connector that looks like a connector 6-pin inline with to the (http://i20.photobucket.com/albums/b225/r4ch3t/Aux-connector-148x200.gif). But it is connected with 4 wires (red/white, white, green, purple)

  To upgrade the PSU, I need to find a way to connect it to the new motherboard, but I can't find any information or datasheet for the motherboard or the power supply.

  Motherboard:

  SP #611834-001

  DG #611794-000

  PSEYU0JCY0W197

  AS #611793-003

  0J REV

  POWER SUPPLY:

  Model: PC9057

  PART NUMBER: 611483-001

  ALTERNATIVE NUMBER: 613764-001

  Where can I find more information about the card mother/PSU?

  What is the connector? It is standardized in some way?

  What is the combo of tensions/soil necessary for the pins?

  Thank you

  Your question would be better served in theHP Enterprise business community.  I highly recommend that you join the community and post your question there.

  This time, do not forget and give identifying information more accurate than you did in this post. In the image below, you will see how what gave you as a product identifier can be confusing.

  

• HP USB 3.0 SuperSpeed PCIe x 1 card does not install on HP 8200 Elite SFF

  I buy the HP USB 3.0 Super speed PCIe x 1, QT587AA card.

  I have istalled the card in a HP 8200 Elite SFF, Windows 7, 64 bit. Connected to power auxiliary esata.

  After installing the drivers from the CD, I get a message from ball of Windows indicating the software device driver has not been installed successfully. When I look in Device Manager I see the yellow triangle next to the (USB) Universal Serial Bus controller under other devices, and when I go into the properties of this status is driver not installed (code 28).

  I have the latest BIOS v2.15.

  Info from map:
  P, 3.0(2x2) USB SuperSpeed PCIe x 1 card
  CPL REF: 661320-001
  SPN: 663213-001
  IAW REF: HI343-1
  CT: PCFKCOAAB1S1HL
  Rev A

  Any ideas?

  Simple answer: not compatible with the 8200 series by the HP Web page.

  See: http://h10010.www1.hp.com/wwpc/uk/en/sm/WF06c/A1-329290-332469-3965933-3965933-5153600-5153603.html

• HP 8200 elite sff second monitor "How to enable.

  I checked all the documents on the website of HP but still can not find how to connect and allow the second monitor BIOS for hp 8200 elite sff? Or where is a user manual?

  Again, the computer is a model of enterprise class regardless of its use in a domestic environment. Many computers of class business use specific hardware environment and is not generally used in a domestic environment. Again, can be best answer to your question in the HP Business Support Forum.

  To get help without going through the business forum... According to the specification, this model supports a legacy of VGA analog channels and a modern digital DisplayPort port. Two of these ports get their signals integrated Intel graphics subsystem. The DisplayPort port will require an adapter unless the monitor has also a display port. If the computer has been ordered with an alternative graphics or one card has been installed everything changes.

  Please provide a photo of the back of your computer, showing the VGA port and all ports nearby. Also provide brands and models monitors that you are trying to use with this computer.

  Please send Bravo

• PC HP Compaq 8200 Elite MT: Should I roll back before flashing the BIOS?

  Hello, I am trying to determine if the update of the BIOS shown on your website is right for my machine: HP Compaq 8200 Elite MT PC. After selecting 'Let HP find my products,' he identified my machine and sent me to a page that asked me to 'Select language driver and OS' two squares. I selected my language, then going on to the next box that asked me to choose my operating system. However, it does include all the Windows 10 selections. I used to have initially Windows 7 Professional. However, I've recently upgraded to Windows Professional 10. Is it safe select the operating system Windows 7 Professional, even if I is no longer on the machine? You see, I want to update BIOS, because I'm having trouble starting after I install memory upgrades, and the provider of the RAM is recommended to upgrade to the latest version of BIOS upgrade before installing the upgrade of RAM, to eliminate these problems. I don't want to make a mistake, and then select the wrong BIOS update. There is an update of the BIOS on HP.com for my MoBo machine, but only for Windows 7 Pro. So should I go back to 7 Pro, before the update?  Please, inform me as to what I should do.

  Hello:

  I just got the flash drive, I use to update BIOS on my HP business desktop PC.

  I plugged in my dc7800 CMT W10 also running.

  The window on the flash drive, and I closed it.

  Then I went on the desktop, click on this PC, click with the right button on the flash drive, which is drive E:\ in my case.

  Then I chose the Format from the menu, and a box will open.

  In the file system drop-down list that I get on my USB flash drive, I get the following options:

  FAT (by default) which is what you want to use.

  NTFS

  FAT32

  exFAT

  So if you don't see these options, try another flash drive.