HP compaq cq58-250sq: Hp Compaq CQ58-250SQ, upgrade memory.

Similar Questions

• Compaq CQ58-bf9WM: upgrade memory for Compaq CQ58

  Compaq CQ58-bf9WM came with 2 GB of memory and 1 slot.  I've recently updated 8 to 8.1 windows (I think its 64-bit, but it's the original operating system updated) and AMD inside.  What is the maxium memory slot amount single will execept.  Care say he'll take 8 GB also said there are 2 memory slots (2 blocks of 1), but there is only one (based on Visual information items).  Please notify.

  Hey @fridge411,

  I recommend always go against what is in your textbook as recommended. But sometimes these things just work without any problem. I wouldn't you not waste your money.

  Thank you.

• Compaq 500 b (VS695UT): memory Compaq 500 b problem

  I'm sorry to 'beat a dead horse' in this question, but I'm frustrated.

  1. I have improved my Compaq 500 b microtour Windows 7 Pro for Windows 10 Pro.  Everything went well, and I appreciate it.  I currently use two modules of RAM of 2 GB for a total of 4 GB of RAM successfully.

  2. for the purpose of "improvement", I thought that I would be upgrading or increase my 8 GB RAM, installing two 4 Go PC3-10600 (1066 / 1333 Mhz) 240 pin, non - ECC memory bars.

  3. Once installed, the computer refuses to start, and I have a black screen.  I put back the original 4 GB of RAM in the computer, and it starts fine.  I made sure I had the latest and more great BIOS downloaded and installed.

  4. I tried upgrade memory once more, in vain.  I tried to replace a SINGLE module (6 GB of RAM total) without success.

  5. the 4 GB RAM that was originally here works very well. (I'm typing on this computer now).

  6. my thought is that: "even if I'm still in Windows 7 Pro; "I should have been able to spend 6 or 8 GB of RAM", right?

  7. the computer originally came with 2 GB of RAM, and I upgraded to 4 GB.  I read some of the older posts, and I think that I made sure that I use the correct RAM.

  8. ALTHOUGH; When I run a single module of 4 Go PC3-10600, the computer won't start or run correctly. SO I'm looking for advice.  Any thoughts?

  Hello:

  The quickspecs 500b at the link below show that the maximum memory is 2 x 2 GB.

  See page 4.

  http://h20195.www2.HP.com/v2/GetDocument.aspx?DocName=c04113766 & DOCTYPE = QuickSpecs & doclang = en_US & SearchQuery = & CC = UK & LC = in

  Now the way I interpret the Intel G41 chipset info from the link below... it seems to me that on PC with DDR3 memory, the max is 4 GB, and for the PC with DDR2 memory, the max is 8 GB.

  http://www.Intel.com/content/dam/www/public/us/en/documents/product-briefs/G41-chipset-brief.PDF

  Makes no sense to me, but I would say that since 2 x 4 GB does not work and the characteristics of HP say the max is 2 x 2 GB, and the way I read that Intel is to say, it's the reason why the memory does not work.

• Upgrade memory on Compaq Presario V3839TU

  I want to upgrade my laptop Compaq Presario V3839TU 1 GB to 2 GB memory... Is it possible to upgrade memory to this laptop? I don't know how many slots on this laptop, and what type of memory should I buy if it has the available memory slot? Can this laptop contain 2 GB memory? Someone at - it never upgrade memory to this laptop? Please help me... THX before...

  Hello

  kenzhong2 wrote:

  I want to upgrade my laptop Compaq Presario V3839TU 1 GB to 2 GB memory... Is it possible to upgrade memory to this laptop? I don't know how many slots on this laptop, and what type of memory should I buy if it has the available memory slot? Can this laptop contain 2 GB memory? Someone at - it never upgrade memory to this laptop? Please help me... THX before...

  Your laptop has two DIMM slots. The maximum amount of memory, others have upgraded to 4 GB is. The maximum recommended by HP is 2 GB. The memory of replacement should be PC2-5300 667 Mhz, 1.8V

  Here is a link to the memory at Crucial.com.  Only use the modules of replacement by major memory creators who produce guaranteed compatible memory modules to avoid the risk of buying incompatible modules.

  Best regards
  ERICO

• Compaq CQ58-260SA: upgrade the processor on a card mother HP1858

  I'm looking to upgrade the current CPU Intel Celeron B830 since my laptop Compaq CQ58-260SA.

  I have contributed up to 8 GB memory, the laptop has a card mother/Motherboard HP 1858. Which I believe holds the G2 plug.

  I searched high and low online to see what the replacement of CPU max/implementation to date for this motherboard

  Can anyone help please

  Hello

  The motherboard has Intel HM70 Express chipset only supports Celerorn or Pentium processors.

  Specifications of product PC portable Compaq CQ58-260SA | HP® Support
  http://support.HP.com/ph-en/document/c03501719

  The mobile Chipset Intel® HM70 Express family chipset series Intel® 7, providing integrated USB 3.0 on a single chip - Intel® microarchitecture (code named Sandy Bridge and Ivy Bridge) and supports the Pentium® and Celeron® processors. The Chipset Intel HM70 provides:

  http://www.Intel.com/content/www/us/en/chipsets/value-chipsets/mobile-chipset-HM70.html

  Intel Pentium 2030 m is the most powerful possible to install.

  http://cpuboss.com/CPUs/Intel-Pentium-2030M-vs-Intel-Celeron-B830

• Compaq CQ58-278SA upgrade to windows 7

  Hello

  Can I downgrade Compaq CQ58-278SA to win 8 to Win 7?

  If so, which version of Win 7 is possible to use?

  Thank you

  renosa

  Hello:

  You should be able to use all of the W7 drivers and software the HP 2000 t - 2A 00 on your model, except the BIOS and firmware files.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5275370&LC=en&cc=us&DLC=en

  You will need to have a valid product key and license W7 as well as the installation media.

  The product key for W8 in your notebook is encrypted in the BIOS and will work for an OEM version of the W8.

  There is no more product key stickers on PCs that come with the W8 or 8.1.

• Compaq CQ5101IT: processor upgrade

  Hello

  I want to spend my CPU, so I ask if on my mother M2N68 Council-(Narra5) I can get an AMD Phenom II X 4 810 CPU?

  Sorry for my English not so good, thank you.

  Roberto.

  Here is the support page for this motherboard

  http://support.HP.com/us-en/product/Compaq-Presario-CQ5100-desktop-PC-series/3942817/model/3980844/document/c01701270/

  These are supported CPU

  Only processors AM2 + socket are supported with this motherboard.

• Compaq Presario CQ5500Y: Compaq Presario SSD upgrade

  Original 500 GB drive HARD shows signs of failure eminent.

  I cloned successfully the reader to a new 400 GB disk using NORTON GHOST.

  (I know this drive is smaller than the original, but less than 30GB was used on the original)

  Anyway, the new drive would not start.

  Assuming that the problem may come from the BONES associated with the license, I ordered all of the Compaq recovery disks.

  Meanwhile the recovery disk set arrive, I bought a 120 GB Sandisk SSD.

  (Again, I know that the 120 GB SSD is smaller than the original 500 GB HARD disc that came with the computer, but I do not plan to fill even 50%).

  Anyway, The Recovery Disc Set arrived and I tried to use it on the new 120 GB SSD Sandisk card.

  The process seems to be okay, all 3 discs of the series seem to copy and then the computer restarts and a screen displaying the files fly across the screen from one folder to the other stays there forever.

  I waited 15 hours and came back and I can still see:

  Fly across the screen, files from one folder to another folder.

  The drive activity light flashes, but of course, there is a problem.

  Some possible facts/related information:

  The SSD is detected in the BIOS.

  The good SSD checks, a "Smart" BIOS Diagnostics

  I can't find anywhere in the BIOS to disable the AHCI, it only shows SATA or IDE.

  Current Bios version is 5.5.5, and I couldn't find an updated BIOS anywhere.

  Current memory (RAM) is 4 GB (2x2gb), which was an upgrade because the machine was purchased.

  Can someone tell me please how to get beyond this problem?

  Greetings,

  I use the Paragon Professional Disk Imaging software.

  Try Macrium Reflect free. Disk cloning is also included in the free version.

  See you soon!

• Compaq Presario CQ5600F: upgrade to M2N68-(Narra6)

  Hello. I have a desktop PC Compaq Presario CQ5600F which took a power surge. I use Windows 10 Pro and I'd like to update the Pegatron M2N68-(Narra5) motherboard M2N68-(Narra6). I saw some of these for the sale of the mobo. Can someone point me in the right direction. I'm trying to find the drivers and perhaps installation information. The motherboards I've seen are either used, rebuilt, or "other nine" with no accessories.

  Hi @stan7926,

  Thank you for your participation in the Forums of HP Support! It is a great location to get resolutions and interact with experts from the community. I understand that you need information on an upgrade of the motherboard of your PC. I'll be happy to help you with this.

  A remarkable work was done by your little research on upgrading motherboard for your desktop PC before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  First of all, the specifications are very clear on the HP website. It supports "M2N68-(Narra5)" with the drivers, BIOS and other updates available on the HP Web site. About the upgrade to M2N68-(Narra6), it may be possible, but before you buy the product, I would suggest that you contact a technician on-site that this motherboard is not listed by HP as a compatible Web site.

  I thank you greatly for posting your question on the forums of HP and for giving us the platform to help you. You are a customer of HP and we greatly thank you for doing business with HP.

  It is important that you are having problems with the bios and driver incompatibilities on the motherboard and windows 10 Therefore, it is recommended that you contact a local technician and check the compatibility of the motherboard before making any attempt to improve it. We cannot have the bios for it and corresponding drivers. Once again, you will need to visit the websites of 3rd party hardware manufacturers to update the bios and other drivers.

  I hope this helps! Please let me know how it goes. If it helps, please mark this message as 'accept as a Solution. If you need help, let me know and I will gladly do everything I can to help. If you want to say 'Thank you' for my efforts help, click on the button 'Thumbs Up' to give me a Kudos. I really hope that the problem is solved without hassle and things work fine for you.

  Now carefully and have a great week ahead.

• Upgrade memory for Compaq Presario V2000

  I have the original of the installed memory card.  Can the laptop handle a 2nd card with 1 MB?

  budman66 wrote:
  

  I have the original of the installed memory card.  Can the laptop handle a 2nd card with 1 MB?

  Compaq Presario V2000Z series

• Maximum memory: 2048 MB
• Slots: 2 (2 blocks of 1)
• Standard memory: 256 or 512 MB removable

Memory each slot can hold DDR PC2700 or DDR PC3200 with a maximum of 1 GB per slot.

Can be ordered through crucial Technologies.

• Upgrade memory of PC Compaq Presario SR2177CL Desktop problem

  I have a Compaq Presario SR2177CL desktop PC.  I checked the specifications of the product on the HP site and this is what it says for the record:

  Memory

   

  Attributes Installed memory 1 GB Maximum allowed 4 GB * (4 x 1 GB)
  * Actual available memory may be less

  Speed supported PC2-4200 MB/sec Type 240 pin DDR2 SDRAM

  I went to newegg and purchased:

  CORSAIR ValueSelect 2 GB (2 x 1 GB) 240-pin DDR2 SDRAM DDR2 533 (PC2 4200) Dual Channel Kit Desktop Me...

  When I put the pair of DIMMs in the pc, it won't post more.  The screen is still asleep and I never see the bios screen, I can't go in the bios configuration, or whatever it is.  As soon as I remove the pair, it works again.  The PC came with 2 512 MB DIMM in the slot 1 and 2, so I tried to delete those and replacing them with the pair I bought and got the same results.  I buy the bad memory?  I see it should work.

  Thanks in advance for any help and ideas.

  Chuck

  Finally!  I decided to try the suggested crucial.com memory, I went to the city and found in the store of the local computer.  It is plugged in and it works like a charm.  NewEgg gave me a credit on the memory of others when I called them, so everything worked.

• Compaq elite 8300 sff: upgrade memory for compaq elite 8300 core i5 3570

  Hi experts,
  
  I m using compaq elite 8300 sff on win 7 x 64.
  He has already double 2 GB pc3-12800 (800 MHz). I want to spend at least 8 GB. I m thinking about buying 2 x 4 GB of the same type, is it possible to do?
  I can't find any specs for its bus speed, so what is the fastest, it can handle in case I want to replace the double memory?
  
  Thank you.

  Hello

  Yes it will work as well.

• Compaq Presario CQ5720F: upgrading Ram

  I wonder ig this stick of RAM is compatitble with the computer and if the computer can manage a RAM of 8g stick replacing the 3g one.

  Kingston HyperX 8GB 1333 MHz DDR3 CL9 DIMM FURY

  Compaq Presario CQ5720F

  Processor: AMD Athlon II X 2 245
  RAM: 3 g (2.75 usable)
  System type: 64-bit

  Graphic video: Integrated using ATI Radeon 3000 graphics

  My friend's computer is out of memory so that she can't play a game with us. She has need of more memory so I want to upgrade the RAM, but I'm not sure which one to buy.

  Mousu, welcome to the forum.

  This is memory that is recommended by HP to be compatible with its motherboard:

  • Dual channel memory architecture

• Upgrade memory - Compaq Presario SR1630NX

  Planning the upgrade on my HP - Compaq Presario SR1630NX memory. Before buying a product of memory, I want to make sure it is compatible with the Compaq. Info on the Compaq Presario SR1630NX memory is as follows: 1) 512 MB (2 x 256) memory installed in the 4 slots 2 DIMM; (2) 2 4 DIMM slots open. (3) type of memory is 184 pins DDR SDRAM. It is a bit confusing when you try to sort the different products available memory. Identified the PNY Memory twin 2048 MB PC3200 DDR 400 MHz memory (2 x 1024MB), Model #MD2048KD1-400. Memory is this product compatible and recommended? Otherwise, any suggestions?

  Hello

  JJM says:
  I ordered the Crucial memory upgrade kit. Then will come the real installation. I'm a little tentative trying to change modules of memory because I've not done this before. Are there problems I should be aware of that I open the SR1630NX, find the motherboard and memory sticks, remove and install new?

  It's really very simple.

  All it takes is patience and attention to the location of the index in the module and the game inside the DIMM slot.

  Unplug the power connector from the power outlet.

  Open the case.

  touch something metal in the case with your hand to dissipate static electricity from your body. I actually always use an anti-static wristband.

  Press the tabs on each side of a module locking and it comes out.

  use the thumb and forefinger on each end of a module and remove it carefully.

  during the installation of the modules to place them in the same locations you deleted the 'old' of.

  Search the index of the module tab and the tab corresponding inside the ALS DIMMt.

  Use the slots on the inside and under the locking tabs guide to guide the module in the DIMM connector correctly

  now, use your thumbs to the top end of the module for shake it gently in the DIMM slot.

  you will know that it is in place as you feel / hear a click.

  now check to make sure that the locking tabs are in place at the ends of the module.

  Repeat the process with the other modules

  That's all there is to it.

  Kind regards

  ERICO

  .

• Compaq presario sr5518f upgrade processors

  First of all, I apologize if I do not write in the correct section.  A little new here.

  in any case, I'm going to completely overhaul my Compaq Presario SR5518F.  I'll get a new graphic/video card, power supply, and processor.

  Speaking of the processor, I have a question for someone who would know the upgrade of processors.

  The specs of my PC (which can be accessed HERE) said I can move to an Intel Core 2 Duo E7xxx.  I'm looking at upgrading to an Intel Core 2 Duo E7400 processor which has close to 3.0 Ghz (2.8 to be precise) of the operating speed.

  The question I have, is the Intel Core 2 Duo processor E7400 compatiable for my Compaq Presario computer motherboard?  I have never replaced or upgraded forever, and so I want to make sure I'm making the right decisions when buying upgrades.
  
  I would appreciate your help or you guys could give me advice.   Thank you and have a nice!

  Hello

  As you can see from the following link:

  http://support.HP.com/us-en/document/c01386897

  It supports Core 2 Duo E7xxx (Wolfdale-M) CPU means that it will support CPU E7400 but you must update the BIOS to make sure.

  Kind regards.