HP Compaq DC7900 SFF - no support BIOS for USB keyboard/mouse

Similar Questions

• Tecra M5 - supported BIOS for Bitlocker in TPM mode

  I have a Tecra M5 (PTM51E) running Vista Ultimate. I would like to configure Bitlocker with the TPM secure who is aboard. I am aware that you can use Bitlocker without a TPM, but it requires the user to have an external token for example on a USB key that they have to be inserted at boot time. I prefer to use the TPM mode there is no need of this.

  I have flashed the BIOS to v3.60 which is the last. Before I was able to Flash the BIOS in Vista (which is the only option provided on the Toshiba's European support site) I found I was load drivers for 'VAT package', without that this BIOS update simply says "computer not supported." Another way to do it is get the BIOS for the PTM51U from the American site which allows you to write the BIOS update on a bootable floppy.

  I used the "Bitlocker Drive preparation tool" which is available in "ultimate" Microsoft to set up the partitions as required by Bitlocker, i.e. my HDD 40 GB is divided into a primary to be encrypted (c) partition of 35.7 GB and 1.5 GB separate partition (s).

  I have the driver v3.00.1135.00 "Trusted Platform Module", which is the last. After you activate the TPM secure in the BIOS (press and hold ESC when turn on/off and then press F1, second page) I can then go to the Infineon security platform Initialization Wizard and set the "owner of the platform" and other passwords etc.

  The TPM Initialization Wizard automatically opens the Bitlocker setup application when it ends (or you can get to it any time thereafter through the control panel).

  The message I get from the Bitlocker cmdlet is:

  "Your system is not configured to use BitLocker Drive encryption. The BIOS did not correctly communicate with the Master Boot Record (MBR). Contact the computer manufacturer for BIOS upgrade instructions'.

  Does anyone have this working on a M5 (i.e. Bitlocker with TPM)? How did you do?

  Thank you very much m.

  Hello

  Please contact the nearest authorized service partner. They can help you upgrade the BIOS BIOS supports bitlocker, including the update for EC/KBC. I know it seems strange, but make sure that they can help you.

  Just call and ask.

• Lost my transmitter for wireless keyboard/mouse Combo

  I lost the transmitter of USP port for a combo keyboard/mouse Wireless Windows (7000 ergonomic natural).  Can I buy it separately?  I can only find when sold with the keyboard or the mouse.  Please provide an exact figure and where to buy.  Thank you!

  Hello

  You can check out the link below and check if this may help: how to replace software or hardware, packs Microsoft service to order and replace product manuals: http://support.microsoft.com/kb/326246

  Natural Ergonomic Keyboard 4000: http://www.microsoft.com/hardware/en-us/p/natural-ergonomic-keyboard-4000/B2M-00012

• Windows XP - recognition USB keyboard/mouse after change in the BIOS

  I moved to use a mouse and a keyboard that is connected via PS/2 ports for a new keyboard and mouse which connect via the USB ports.  The BIOS was originally installed to recognize the keyboard and the mouse through the operating system, but to use the start menu (e.g., to be able to press the 'Del' key to access BIOS), the BIOS must be set to recognize the keyboard and mouse via the BIOS.

  The problem is that in this way, Windows does not recognize the keyboard and mouse.  Is there a way to fix this?  I would like to have the keyboard and mouse recognized at startup so that I can access the start menus and the menu of the BIOS, but it does not help much if I can not then use Windows.

  I guess he has put something in Windows during installation which checks the BIOS settings to determine how to access the keyboard and mouse.  Is it possible to change this setting to Windows?  Possibly through the procedure of "repair"?

  Thank you

  George

  Check all revisions of the BIOS for your system.  You might be unluck and you might be stuck with this problem.

• Portege R100 - supported Bios for ATA6

  Hi new to the forum,
  .
  After more than a year of use 24-7 my portable drive is eventually died: (.)
  .
  I had to ask for a replacement and have done much research, but have a few questions.
  .
  Toshiba hard drive array has all the current models of 1.8 ".
  Model numbers can be decomposed into capacity, use... low voltage etc., number of trays.
  It is clear that they all (physically compatible) ZIF Sockets and similar form factors.
  .
  Q > 106 BIOS update shows no support for ATA6. Can I use an ATA6 drive in the BIOS with a value of ATA5 with a slight degradation in performance?
  .
  Thanks in advance.

  Hello

  Hard disks that are cared for and compatible on your unit supports one IDE ATA-5 interface.
  AFAIK the ATA interface is compatible to the bottom. This means that ATA6 supports the ATA5 but you must use it with ATA5 performance.
  The BIOS update does not change the performance.

• No BIOS for USB support? Can't boot from USB HDD

  Hello

  I was trying to install two operating systems (Linux, Windows Vista CTP) on my external hard drive (USB 2.0, Firewire). And I can't seem to-because he doesn't seem to be a way to specify the support of USB devices in your boot sequence. It seems that the configuration of the BIOS is limited to these 5 icons of basic (no text below the same you know what they represent) - that seem to hold to drive HARD, CD/DVD, network, etc., but none of the USB hard drives (I don't think the FDD account)?

  For example, install Windows Vista complains that the BIOS does not support boot from my external hard drive - Linux does.

  Or am I missing something...?

  Kind regards

  Krish-

  Hello

  You n writing t nothing on you laptop but as far as I know it of not possible to boot from the external USB HDD.
  You can start the USB FDD, HDD, Lan or ODD but not the USB HDD internal.

• lost a USB transmitter for wireless keyboard/mouse

  I lost my usb Microsoft Wireless 3000 v2.0 keyboard transmitter and the mouse - any alternative is buying another set of unity?

  Hello

  You can access the link: how to replace lost, broken, or lack of Microsoft software or hardware: http://support.microsoft.com/kb/326246

• HP dc7900 sff (energy star): upgrade to q6600 or q9650

  Hi I want to upgrade to q9650 or q6600 and I have hp compaq dc7900 sff (energy star)

  and I want to know if the upgrade works and I want to know if I can change the power supply

  Thank you and power supply 400w

  Hello:

  Here is the link to the quickspecs for the dc7900.

  Can be found on page 9, taken processors supported.

  http://static.highspeedbackbone.NET/PDF/13029_na-2.PDF

  The Q6600 will not work, but will the Q9650.

  You cannot change the power supply.  It is the property of HP and they do not have a better for the SFF.

  The Q9650 will draw 30 more watts than a core 2 such as the E8400 processor, so I would not expect on adding a video card, etc., unless you install a vido cards as a GT 610 or HD 6450 low powered.

• Upgrading power supply on DC7900 SFF

  Hi, I want to know what options are available to upgrade the power supply on my DC7900 SFF to support a graph card Radeon R6570.  Block of current output 250W PSU but the graphics card needs minimum 400W.  Did someone awatre of a secondary market PSU with > 500W that can fit into the SFF case?  Any other suggestions would be greatly appreciated.

  You are the very welcome.

  Yes, this diet is the P/S standard for the dc7900 CMT.

  It will be, in any way, shape, fit into the dc7900 SFF.

  As I posted above, I do not know of any alternative feeds that will work in the SFF.

  Try the card as it is and see what happens.  What a guy says it works fine.

  I guess it depends on how much of a load you put on it and the other factors.

  Use this power supply calculator to help you determine if it is possible to use the 6570 in your machine.

  http://www.Thermaltake.outervision.com/index.jsp

  Paul

• Can I update to this processor DC7900 SFF?

  -Hello, I have a PC HP - Compaq DC7900 SFF with a processor Intel E7300 (Core 2 Duo), and I want to update this processor by an Intel Q9650 (Core 2 Quad) (only to change the processor)?

  -Thank you.

  Hi, Pepito,.
  
  Yes you can upgrade this processor is compatible.
  
  Click on "Bravo Star" icon on the left side so resolute.
  
  I am an employee of HP, but the comments in this forum is of myself and is not HP

• HP Compaq 7900 SFF PCI-E 2.1 Support?

  I would like to ask if the Small Form Factor Professional PC HP Compaq 7900 supports the new 2.1 PCI Express interface? I have updated the Bios with the latest version, but still have doubts about this. I've read several times that these types of small format, older factor of work stations not updated to support the PCI 2.1 and because of this, the new Radeon 5XXX cards, for example the faithful 5450 doesn't work, overheating or breaking the motherboard.

  Is there anyone who knows or who have used a HD 5450 or HD 6450 or the new Radeon cards in this small form factor pc?

  Thank you

  The dc7900 is PCIE x 16 version 2.0 by reference table 2.1 on page 2 and 3 of the technical reference manual.

  Profile low http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=40000048%20600083901&IsNodeId=1&Description=low%20profile%20video%20card&name=Radeon%20HD%206000%20series&Order=BESTMATCH 6450

  This could help. http://h30434.www3.HP.com/T5/desktop-hardware/dc7900-SFF-graphics-card/TD-p/1373493

• How can I find a graphics driver for my hp compaq dc7100 sff

  My computer is a Hp compaq dc7100 sff, is to install the operating system is windows 7 32 bit

  Hello:

  Please follow these instructions and see if the video driver installed.

  Your integrated graphics (GMA 900) is not capable of Windows 7.

  I can send you the link for a pilot who has to work a lot better, but you never have Aero.

  Here is the link to the driver.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = ob-47264-1 & mode = 4 & IDX = 0 & prodTypeId = 12454 & prodSeriesId = 3352967

  You need run the package. It will extract the drivers and it will then give you an error operating system not supported.

  Close the error window and then manually install the driver by clicking on the video controller in Device Manager. Click the driver tab click on update driver. Select the "Browse my computer for the software method.

  Navigate to: C:\SWSetup\sp34749, make sure that the include subfolders is selected and the driver should install.

  It should be much better than what you have now.

  Paul

• A HP Compaq dc5750 SFF PC can be upgraded to support a 3.4 ghz amd phenom II x 2 565?

  I have a laptop compaq dc5750 SFF. bought about 2 years ago. It has an AMD ATHLON processor. I want to update for AMD PHENOM II X 2 565 3.4 ghz processor. my PC motherboard can support the it? If this isn't the case, then please recommend changes.

  Thank you

  Pratik b.

  No, it cannot support the Phenom II processors and it will work without any mods that will do it.

  Frank

• Graphics card for HP Compaq DC7900 compact

  Hello, I'm looking in the graphic upgrade to my PC HP Compaq DC7900 Small Form Factor.
  
  Currantly his using Intel Q45/Q43 Chipset integrated graphics. I want to put an external card that will give enough power for the modern games.
  
  The food is the real question. Its a power of 240 watts, and as far as I can see its not expandable.
  
  I need to know what will be the best possible card, I can run in this system. I intend running the material following once its completely improved.
  
  4 GB memory SDRAM DDR2 240-pin (2 cards)
  Western Digital 1 Terrabyte hard 7200 RPM SATA
  A standard DVD player
  Coprocessors for dual-core Intel Core 2 Duo running 64-bit Windows 7
  And standard case fan included in the case
  
  Any help is greatly appreciated thank you: 3

  All you have to do is read the page on record. It lists all the cards that are part of the SFF.

  http://h10010.www1.HP.com/wwpc/us/en/en/WF06a/12454-12454-64287-321860-3328898-3785403.html

  Feeding is evolutionary, but hard to tear. See recycling guide:http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/Countries/_MultiCountry/disassembly_deskto_200882019130.pdf

  350W http://www.supernotebook.com/power-supply.php?psupart=3975?psu=SPI350MB-MC-DC7900SFF

• HP Compaq d530 SFF DIMMs do not recognize. Windows Vista Home Premium 32 bit - BIOS version 02.44

  Hello HP community!

  I recently got a HP Compaq d530 SFF of the company, where I had my work experience.

  Fortunately, I took their offer and took the PC at home, everything was going well until I bought myself some new DIMM from ebuyer.com.

  I again for a fact, the computer must DDR 333 MHz, PC2700 and it must be in DIMM format, so I went and bought 3x1Go modules. A few days later they arrived and I have them inserted in the computer, ensuring that two DIMMs was in blue locations and others (I wanted to keep a 256 MB module to) in the black sites.

  I have re-inserted power cable and tried to boot the PC, he showed me a BIOS message, showing that the amount of memory has changed, since the last boot. Once the configuration is presented, he acknowledged only the 256 MB module. I then turned off the computer, and then remove the 256 MB module, to see what would happen. So, I restarted the PC, and it gave me an error (not shown) tone. To which I then tried (needles) each DIMM different to see if one of them was vice. They are all gave me the same error tone. Since then, I've been running Windows Vista Home Premium, with 1 GB (4x256MB DIMM).

  Maybe someone has a suggestion how to fix this?

  I've already updated the version of the BIOS at 02.44 (later I could find).

  Thanks in advance!

  Yours sincerely Simon Cahill

  Beatsleigher,

  Not all memory is the same, even when picking PC2700. Did you buy non ECC?

  Here is a guide on the configuration of the memory for the D530SSF