HP compaq dx7300 microtour format: I want to fix the registry file

Similar Questions

• HP Compaq dx2400 microtour format: video card - motherboard compatibility

  Hi, first I want to sorry my bad English because I'm Romanian.

  My question is: I have a HP Compaq dx2400 microtour and I want to know if AMD R7 240 1 GB ddr5 Sapphire, it will be able to run on my pc.

  Thanks in advance!

  Stefan, welcome to the forum.

  I was able to understand exactly what you need.  Your English is no problem.

  Here is the Service reference Guide to the computer.  It will give you all the information you need.  On Page 104, it has information on the power supply unit (PSU).  It is 300 w which is not enough to feed the video card you want to buy.  Also, I think that the card requires UEFI in the motherboard instead of a standard BIOS.

  Your best options would be to contact the manufacturer Technical Support to see what they have to say.  If this card will not work, they should be able to tell you which of their cards will work.  They will need some information in the document I have provided.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Compaq Presario CQ71-320SA: how to back up the registry

  I need to change my internet browser for Secunia PSI - it is to make changes to the registry. As I am a PC-numpty (a technical term) an expert on the PSI forum gave me a walkthrough.

  The first step is to back up my registry. I back up my laptop every month that you are prompted by the excellent Action Center of HP but can't find how to make a backup of the registry just. Here, a search found many threads, but none of them relate to my problem.

  Could someone help me please?

  New Envy 15-AH151sa
  More old Compaq Presario CQ71-320SA screwed up by free upgrade from Microsoft of Win7 for Win10

  Hello

  You can do the following.

  Hold down the Windows key and press R

  Type regedit and click on enter - click Yes at the subsequent uac prompt

  In the upper left corner of the Registry Editor screen, click on file and then select export from the menu

  Select where you want to save the backup file and give a name to the file

  Click on the Save button and give him a few moments to complete.

  Kind regards

  DP - K

• The problem "your current security settings do not allow this action" when I want to open the swf file in Windows Media Player.

  How to solve the problem when I want to open the swf file in windows media player? There, half year, when I click on a swf file, it could automatically play in Windows Media Player.

  Now when I want to open a SWF with Windows Media Player, it pops up a window "your current security settings do not allow this action".

  How to use watch the video in Windows Media Player swf?

  Hello

  SWF is a file format for multimedia, vector graphics and Action Script in the Adobe Flash environment. Origin with future Wave Software, then transferred to Macromedia and then coming under the control of Adobe, SWF files can contain animations or applets of varying degrees of interactivity and function.

  SWF functions as the dominant vector "animation" on the Web for graphics display format. It can also be used for programs, games by browser commonly, using ActionScript.

  Method 1:

  I suggest open he file in Internet Explorer and check to see if you encounter the same problem.

  Method 2:

  Step 1:

  You can also try reinstalling Flash Player on the system to fix the problem.

  To uninstall a program in Windows 7 refer to the link below

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

  Step 2:

  Once you uninstall Flash Player reinstall rear and check to see if you encounter the same issue.
  To download the latest version of Flash player refer to the link below

  http://get.Adobe.com/flashplayer/

  Once you download Flash Player see the link below to install a program downloaded in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

• I want to send the .ps file to the network through the on-board system postscript printer.

  I use the HP LaserJet 5100 printer.

  I want to send the .ps file to the network through the on-board system postscript printer (the ARM Cortex microcontroller is used and the TCP/IP stack is worn).

  I am able to send the file .ps for postscript using the windows system network printer and the file goes to the printer.

  When the .ps file is sent to the printer by using the command line: copy test.ps\\printer_server\printer_port, is the driver is come into picture.

  Please help me.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Moving files: I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  I am wanting to put the existing files to a new folder, how do I create a new folder and move those file to the new folder?

  Hello

  Go t the location where you want to create the new folder, right-click and select new/folder. Name the folder.

  Go to where the files, select the files and then use the right mouse button to drag the files into the new folder. When you drop the file, a pop-up menu, select the Move option.

  Let us know if you have any other questions.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Want to access the text file of ODI linux machine installed on windows

  Hi all
  
  I want to access the text file of ODI linux machine installed on windows computers.
  To do this, I created the server data files (physical schema) and;
  
  Host(Data Sever): IP address of the linux machine
  User: user of linux machine name
  Password: data
  
  Directory: / hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1 / * application *.
  I shared the folder app in linux machine.
  When you try to run the interface using this file inside the folder app, its giving below error
  
  
  7000: null: java.sql.SQLException: file not found: /hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1/app/STORAGE.csv
  java.sql.SQLException: file not found: / hyperian/Oracle/Middleware/user_projects/epmsystem1/EssbaseServer/essbaseserver1 /app/STORAGE.csv
  
  to com.sunopsis.jdbc.driver.file.x. < init > (x.java)
  
  at com.sunopsis.jdbc.driver.file.d.b.d.a (d.java)
  
  at com.sunopsis.jdbc.driver.file.g.a (g.java)
  
  at com.sunopsis.jdbc.driver.file.w.executeQuery (w.java)
  
  at com.sunopsis.sql.SnpsQuery.executeQuery (SnpsQuery.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt (SnpSessTaskSqlC.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  
  at com.sunopsis.dwg.cmd.e.k (e.java)
  
  at com.sunopsis.dwg.cmd.g.A (g.java)
  
  at com.sunopsis.dwg.cmd.e.run (e.java)
  
  at java.lang.Thread.run (unknown Source)
  
  
  One faces this question erlier? then helpme out.

  Hello

  1. If your files are located on a remote file system, you will need to copy one of your files to the computer that Designer ODI runs to allow ODI retrieve the metadata of the file information.
  2. in the topology to create a physical schema, the directory you enter data and the scheme of work must point to this local file.
  3. then set the file data store in the designer of the ODI. Enter a name, browse and select the file and fill each deposited the files tab.

  * If it's a fixed file, click on the network icon in the column into the columns tab and have checked auto adjustment.
  * If it is a delimited file, use the reverse button on the columns tab to reverse the columns.
  * Right-click on the Datastore folder select View Data, if you can view the data, which means that store file data has been correctly set.
  * If this is not the case, check each tab of the database file to make sure that everything is set correctly and try again.

  4. once the display data to be successful, now change you directories (data and the scheme of work in topology) to point to the remote file system. These directories must be accessible to the ODI Agent that will be used to perform transformations. The directory can be an absolute path (m:/public/data/files) or a parent in the ODI Agent startup directory (.. files/demo /). It is strongly recommended to use a UNC (regardless of the location of execution) name for the path. Executing transformations "agentless", the directory is relative to the directory where Oracle Data Integrator was installed.

  You must have an agent process running on the system that contains your source file.
  Then during the race, the odi interface choose this agent.

  Thank you
  Fati

• Transcribe wants to encode the entire file, I want a clip.

  I try to transcribe on excerpt from a larger file of the source, but I can say that the encoder wants to make the entire file.

  I'm quite new to the creations, and I'm sure it's a simple mistake on my part: I select the clip (about one minute of video), go in the metadata Panel, shows the name of the element, but when I click on transcribe, the encoder displays the name of the whole of the file, and after I start the single item queue told me that coding will take four hours.

  I use 4.2.1 Mac OS 10.6.2 (MacBook Pro 2.16 Core 2 Duo)

  Thank you.

  As evil has stated previously, the transcript of speech by PrPro CS4 feature isn't yet ready for prime time. It requires crystal clear audio with little or no background noise in order to make it halfway accurate. First speech to text technology is still in its childhood years and will need to mature a lot until it becomes very useful.

• Compaq Presario SR2177 BSOD Win 7 - help analyze the .dmp file.

  New installation of Win 7 Home Premium, Compaq Presario SR2177CL.

  AMD X 2 3800 + 2 GHz Dual-Core CPU

  1 GB of DDR2 Ram (2 x 512)

  HDD Sata 200 GB WD

  After a clean, led installation to all updates MS blue screens started.

  MemTest 86 +: pass

  HARD drive test: pass

  Last crash dump file is here:

  https://SkyDrive.live.com/?CID=e714ffc82e58b1a6#CID=E714FFC82E58B1A6&ID=E714FFC82E58B1A6%21174

  As noted, this is a clean install, online only for MS. updates I tried to parse the file .dmp myself, but certainly need some help here.

  Power supply tested ok without ceiling blown on the Council, the onboard video, the lan & sound. No cards installed.

  Blue screen appears almost immediately once the initialization is complete.

  Thanks in advance for any suggestions.

  PDI

  Stop 0 x 124 is a hardware error
  If you are overclocking try to reset your settings to standard processor and see if that helps.
  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:

  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.

  (4) update the BIOS of your motherboard according to the manufacturer's instructions.
  Their website should provide detailed instructions on the brand and model-specific procedure.

  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.

  
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.

  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• It is possible to omit the popup warns "do you want to replace the existing file?

  Well, the title says already

  I have an application where the user can save the results to a log file; These data are added

  (using OpenFile (file_name, VAL_WRITE_ONLY, VAL_APPEND, VAL_ASCII), so the opening of this file will not replace its content, but it adds up.) It would be appropriate to use the same file.

  Unfortunately, when the caller (FileSelectPopupEx) and selecting an existing file of the warning that appears the file already exists. It's OK. But the message keeps saying "want to replace you? In this case, this message is quite confusing for the user, because the program will not replace anything (which of course does not function FileSelectPopupEx).

  So I was wondering if it is possible to avoid or change this message popup?

  Thank you!

  What constant you spent buttonLabel parameter? The behavior of the function changes depending on the indicated button. In particular, (citing the help):

  Note   If VAL_SELECT_BUTTON or VAL_LOAD_BUTTON is passed to the parameter buttonLabel, FileSelectPopupEx service confirms that the selected file exists. If the file does not exist, the function prompts the user to select an existing file.

  Using the button "Save" should result in the confirmation message that you face now.

  I guess if you are using the simple OK button no prompt (to confirm: I'm not sure but I can't test it at the moment).

• You want to change the registry to restrict limited users.

  IOriginal title: backup of registry permissions.

  I found a few customizations that involves changing the registry permissions rather than the entries to allow limited users to do some harmless things that seem to require an account administration.
  Things like change the profiles of power and using Java.

  I am well aware of the importance of a key export before making changes, but which affects permissions, or just the contents of the key, if I try ot restore it? Given the format of a REG file, it seems to be just the content.

  Creating a system restore point be the best way to make the backup in case I live? I think what happens if I accidentally click on the wrong thing and take away the permission rather than add it. Of course, I intend to be careful, but I never know if I'll be surprised or something and saw things. A lesson I learned at the time of the Apple II when my cat (may she rest in peace, I have not had since) jumped on the keyboard and the FUBARed the floppy disk in the computer.

  Hi SlickRCBD2,

  If you export a key before making changes to the registry, it will not affect the set of permissions on your computer.

  I suggest you create a system restore point before making any changes on the computer.

  How to set a system restore point in Windows XP?

  You can follow these links & check if it helps.

  How to back up and restore the registry in Windows XP?

  How do to set or change registry editing permissions in Windows XP or Windows Server 2003?

  Hope the helps of information.
  Please post back and we do know.

• Yahoo! Toolbar - Search Alert Service. Alert: Your browser search settings have been changed or disabled. You want to fix the settings and return to Yahoo!?

  I think my IE8 is taken hostage.  What is causing this error?  How can I remove it?

  This message comes from the waterproof Protection of search Yahoo. Go to control panel > programs and features and click the entry of Yahoo. You will have the possibility to install different components that pushed on your computer of Yahoo. Or Yahoo Search Protection could have its own entrance separate in programs and features.

  And for general information you want secure on the Internet, you might like these two short articles that I wrote for my clients. You can download them in PDF here:

  http://www.elephantboycomputers.com/staying-safe.PDF
  http://www.elephantboycomputers.com/Too_Much_Security.PDF MS - MVP - Elephant Boy computers - don't panic!

• I want to remove the EXIF files

  I put JPEG images to a flash drive to show on my Smart TV and you want to remove the EXIF data, which of course are not readable, but I have to scan through them.  How should I be save these photos in Photoshop CC?

  Normally jpg is not the xmp (exif) files, unless they have been open in Camera raw for editing. If this is the case, you must resave JPGs - never a good idea because of re-compression. I would like to processor use Bridge and image to save the files that you want to display on your smart TV on the flash drive. That would eliminate the sidecar xmp files.

• HP Compaq dc5800 microtour format: Audio does not work after Windows 10

  I've updated from WIndows 7 to Windows 10 in March; on board his system worked right here. Since updates this summer (July 12, I think, although it could be later), the internal speakers don't work. the computer does not detect the presence of the internal speakers (only external speakers and microphone).

  I tried using the Device Manager to update the drivers: controllers audio and audio - HD Audio device - runs the update and says my drivers are up to date (but only registers external speakers). I tried the HP site you are looking for the driver that is compatible with my setup - no luck.

  You can either help me get the driver link or to suggest another solution? Is it possible to retrieve and use (for example) the driver I had for Windows 7? or an earlier operating system?

  Thank you!

  Hello:

  See if it works...

  I used the W7 ADI soundmax audio driver on my dc7800, which uses the same audio chip.

  It's the support dc5800 page...

  This package contains the driver for the ADI Audio CODEC high definition (HD) in desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45615.exe

  Then, you need to enable playback in the soundmax Control Panel, restart the PC and select the speaker in the management section of audio devices in the control panel (hardware and sound).

• I want to export the PDF file to a word doc. I can't find the icon on the right?

  I'm trying to export a PDF doc to a word doc. I've been on the help site, I can't find the icon in the toolbar. My PDF reader is version 9.

  Hi padgetcat440,

  I see that you have a Pack PDF Adobe membership. You can access it directly from this link: https://cloud.acrobat.com (click the tab ExportPDF if want to convert a PDF to Word file). If you have Acrobat Reader, you can also access the ExportPDF function in the tool pane there.

  Please let us know how it goes.

  Best,
  Sara