HP CP1215: HP CP1215 single first printing sheet

Similar Questions

• First print empty page on JO 150

  I just bought a portable printer all-in-one HP OfficeJet 150.  The last two times I turned it to print, the first printed work was empty. So far, these jobs were only a single page, so I don't know if it would be just the first page, or all of the first work. When I print the document again, it prints very well.  This only happens after that the printer is turned on from being off - it does not occur when the printer is recovering "Eve".

  I am running windows 8 (64) on a Dell ultrabook

  Any suggestions?

  Dave

  Thank you for your response. Regarding your first question - it is very likely that I sent a print job until the printer has completely finished its startup routine, because since I posted this, I did not have this problem and I made an effort to make sure that the printer has completed the boot process before sending a print job. So that may have been the problem.

  Dave

• Slow first printing with LBP6000

  I've just implemented a new LBP6000 on my OSX Maverick iiMac running. The first printed page lasts 25 to 30 seconds. In the name of selling on Amazon Cannon wrote several times first impression takes 8 seconds or less. Is it possible I can get 25 to 30 seconds to 8 seconds or less?

  Patrice. Thanks for your help. It turns out that your 3rd point was the culprit. I move to another port and it works fine now.

• CP1215 won't print in black

  My HP Laserjet CP1215 print not black (even in black and white mode).  The cartridge is fairly recent and has left more than 1,000 pages.  I'm unable to print documents.  The leaves come out blank or they will show as the colorful items.  It's something new.  FYI - my color cartridges are low, but still have pages left.

  Thanks for any help!

  I hope you do well welcome to the forum.

  GO HERE and upgrade to the latest firmeware if not already done. Click here and select your operating system e.g. Win 7

  I'm not positive that this printer supports this tool but let see if it is the case. GO HERE  Assuming you are using windows XP or later)

  Hope this helps and please let me know if I can help you further;

  RobertoR

• Print module: Picture Package should inlcude the ability to add different pictures of a single printed sheet

  Module printing - currently in LR2 I can print multiple images at the same size of a sheet of grid/Contact Sheet mode or a photo in several sizes for a map mode Picture Package.  I think I should be able to print multiple images in several sizes of a single sheet.

  This issue has been addressed in version 3 Beta.

• 6.3 Lightroom crashes when I choose single image/contact sheet in the print module?

  Is not first time that I have installed the program. Someone had this problem?

  Hi gleifsson,

  Could you please let me know the operating system you are using, it's Windows or MAC?

  Also please let me know if you are able to work correctly in Lightroom in all other modules or not?

  Kind regards

  Tanuj

• Quick access: 2 pages per printed sheet

  Hello

  Can't seem to get my head around it.

  I have a landscape (a5) and I would like to print 2 pages per sheet so that it becomes a4.

  without changing the size of the document to a4.

  quick response is much appreciated.

  You can place the pages, as proposed by Stix, or use my method. To get a booklet imposed, you do NOT want to start on an even page number (typo in my first post should have said 'note' no 'no'), but always use the turn for all of the pasta spread, then use the booklet printed to impose.

• How can I print sheets of photo wallet at home

  I have a HP Photosmart Premium printer-C410a running Windows XP and I'm trying to print a sheet of photos from wallet size by using HP Photo Creations of the House not online or in a store, my old HP printer had this feature in his photo, printing software but isn't this new printer or at least I have not found. How far do what I want to do with this printer and the software is, or do I need to go get another printer, software, or both.

  Thank you for your response, I found it easier to use Windows Live Photo Gallery

• First printing address labels name

  I am trying to print address labels and I want to print first name and no matter what I change happens first name first.

  If this refers to the Contacts, go to preferences, general and change your option from the last to the first.

• The yellow cartridge leaves print on my Officejet 8500 first printer - error line failure

  Middle yellow document pali and ceased print on my Officejet printer 8500 first. The ink cartridge is full and I tried a new cartridge. I tried to clean the print heads with no result. When I tried to align the print heads I have an error message "align the failure." There is no change of any kind.

  I had previously tried everything listed in the proposed link without result. I replaced the printhead and it solved the problem.

• HP OfficeJet Pro 8500 first print and mirror for treadmill mouse and t shirt

  HP OfficeJet Pro 8500 first concerns.  I tried to figure out where the printer setting is for printing in mirror.  It is usually in the Advanced Settings tab.  I called HP and was told by 2 different tech, then supervisor that HP does not include this option in this printer.  I tried to explain how I felt it was hard to believe and I was told that it is most likely was an option that was no longer necessary.  I have his name and the file number.  I asked this bump up the level immediately above, because I felt strongly HP has not intentionaly left this option.  I digress.

  Can anyone suggest anything.

  Thank you

  Joe

  Thank you all

  Got it to work.

  990 has not worked, 5600 had mirror but does not print correctly.

  I went to the HP site and downloaded different drivers until I could get to work.

  Thanks again

  Joe

• HP LaserJet P1102w: Using laser greased with HP LaserJet printing sheets

  Today, I bought a HP LaserJet P1102w printer.  The manual says I can use transparency to clean the paper path.  The alternative is to use "Copier-grade media.  I do not have a transparent and I'm not sure what is meant by 'media Copier-grade '.  However, I feel laser prélubrifiés cleaning sheets.  Can I use these cards?

  Hi AprilSun,

  I would not recommend the leaves using the cleaning wipe.

  Thank you.

• Slow down the first print Page

  HP Officejet 5610 all-in-One printer;  Win 7 Home Premium 64-bit

  When I print multiple-page documents in a project framework, the first page of the printer is very slow, 60 sec. +.  The following pages are at a speed I know is a parameter "print project.

  Why is the first page so slow and others very fast?

  Thank you

  The document should load into memory embedded printer, and the setting of your printers 'printing spool ".

• HP F4280 stop align catridge printing sheet

  Whenever I put new ink in my printer the F480 HP Print this sheet on which he wants me to scan to align the cartridges, is this mandatory? I can't stop this behavior.

  If I cancel, next time I turn it on it prints again!

  Hi,.

  Yes, the alignment of cartridges is a necessary action, so the alignment sheet will be displayed whenever a cartridge is replaced.

  http://goo.GL/GjWT9

• Single-line print multi-line TextField

  Hi all

  I have 2 TextFields on a frame in my film. What happens is, if my connection to losses of film to a server, it starts to run a timer to continue to retry the connection every 10 seconds. And what I'm trying to do is to write in one of current advance TextFields and what 'Retry' count on what we... But for some reason, I'll try to have 2 htmlText lines appear on the same line, except the second method htmlText adds new text to a line break.

  I already put the TextField on the stage to be single line and no. WordWrap, and set the text of TLF. So how could it possible to appear on separate lines 2. ? What confuses me the most, is that I updated the TextField on the stage and in the following single line (* just to see if it helped, and there no), then why he would print to a second line is spooky in my mind.

  Here is my code:

  / * There are 2 TextFields:

  *    #1. Title/header field, this text will not change.

  *    #2. Message/info field, this is the text I want to change to each loop timer

  */

  function retry_connectSocket(event:TimerEvent)

  {

  trace ("FUNCTION IN: retry_connectSocket():");

  WBDMovie.errorMsg_textField.multiline = false;

  WBDMovie.errorMsg_textField.wordWrap = false;

  Add text to the textfield 'errorMsg_textField ':

  err_string = ' # ' + myTimer.currentCount + '. '. Retrying connection... "

  WBDMovie.errorMsg_textField.htmlText = "< font color ="#FFFFFF"size = '25' > < b > ' + err_string + ' < /b > < / police > ';

  Call function 'connectSocket()' to try to reconnect to the server:

  connectSocket();

  If socket.connected returns TRUE, then the connection has succeeded

  If (socket.connected)

  {

  Print the Message that the connection is successful:

  WBDMovie.errorMsg_textField.htmlText += ' < font color = "#00FF00" size = '25' > connection successful! " "< / police > ';

  } else {}

  Print the Message saying that the connection has failed:

  WBDMovie.errorMsg_textField.htmlText += ' < font color = "#FF0000" size = '25' > Connection Failed! "< / police > < br / > ';

  }

  }

  No idea why it is printing several lines? In addition, any ideas for why the "BOLD" < /b > < b > tags do nothing no more?

  Any ideas or suggestions would be greatly appreciated!

  Thanks in advance,

  Matt

  Have you tried to use a regular dynamic TextField instead of a TLFTextField?