HP cp2025dn is compatible with windows7 64-bit?

It's hp cp2025dn printercompatible with windows7 64-bit?

Hello

HP support on this site which means yes.

http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3673587&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3673580

Kind regards.

Tags: Notebooks

Similar Questions

  • AirBus AirNav system PlugIn HTMLPrinting_2.0.2045.exe not compatible with windows7 (32 bit)

    After installation, then run AirNav, advice is "print to HTML: impossible to join the TemplatePrinter behavior! Futherscripting errors may occur. »

    Click Print, you cannot open the print window.

     

    Hello

    ·         Where and exactly when you get the error message mentioned?

    ·         Did you make any changes before the show?

    ·         What browser do you use to access the internet?

    Method 1:

    I suggest that you run the AirNav program in compatibility mode and check if that helps:

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Method 2:

    How to resolve script errors in Internet Explorer on Windows computers

    http://support.Microsoft.com/kb/308260

    Also check out the link:

    You cannot print or print preview the Web pages in Internet Explorer 9

    http://support.Microsoft.com/kb/2409656

  • After the installation of Windows Vista, I get this error: winload.exe tries to load a 64-bit application, but this processor is not compatible with the 64-bit mode.

    I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:

    Winload.exe

    Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

    I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?

    Thank you

    Ryan

    Hello

    Do a clean install of XP with the XP disk provided by Dell, if you.

    http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

    If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.

    They should do this for a small fee.

    You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    Vista installation was able to destroy this option of relocation:

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP

    See you soon.

  • ZIRE 21 hot sync is not compatible with vista 64-bit program

    ZIRE 21 hot sync is not compatible with vista 64-bit program - apparently it will work with 32-bit vista.  Is there a way to create a 32-bit only for the Zire 21 program without compromising the rest of my 64 bit OS computer? That's what Microsoft sent me. The help for this program was created in Windows format help, which was used in previous versions of Windows and it is not supported in Windows Vista.

    For more information, see Windows Help program (WinHlp32.exe) is no longer included with Windows on the Microsoft Web site.

    Laughing out loud

    You cannot change part of a 64 bit of Vista in 32-bit OS.

    32 bit and 64 bit OSs are completely different operating systems.

    See you soon.

    Mick Murphy - Microsoft partner

  • How can I check if I have a 32 or 64-bit processor? Compatible with the 32 bit processor 64 bit operating system?

    How can I check if I have a 32 or 64-bit processor? Compatible with the 32 bit processor 64 bit operating system?

    operating system 64-bit to 32-bit operating system, it's because the processor went from 32 bit to 64 bit?

    I know that 64-bit is faster and more efficient than the 32-bit processor, but why os 32/64 bit too? OS working elbow-to-elbow with processors?

    Could someone explain a little bit. I so want to know. Thank you

    (1) how can I check if I have a 32 or 64-bit processor? Compatible with the 32 bit processor 64 bit operating system?

    (1) os 64-bit to 32-bit operating system, it's because the processor went from 32 bit to 64 bit?

    (3) I know 64-bit is faster and more efficient than the 32-bit processor, but why os 32/64 bit too? OS working elbow-to-elbow with processors?

    (1) If you have an Intel processor, check here: http://ark.intel.com/ (all news are 64-bit, but many in the pentium and celeron series are not)
    No matter what AMD processor once sempron will be 64-bit.

    (2) No. 32-bit operating systems were once popular is that 32-bit processors cannot run 64-bit operating systems (although the 64-bit processors can run 32-bit operating systems.

    (3) see above. The only drawback to a 32 bit OS is that you can not use more than 3.3 GB of RAM, or to run 64-bit applications.

    teengeek.freehostingcloud.com

  • I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I try the windows XP mode and it tells me that I need to connect a hardware device 3D

    I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I have try on windows XP mode and it tells me that I need to connect a hardware 3D device. I really love the game and I want to use it again.

    Any old copy of Windows XP that could be installed in the host system? If you do not, it should be available at a modest price of an online seller. Perhaps (I'm not too), even an old Windows 98 TO work. The game (using a 3D engine) will not work under pure DOS, so you need a Windows environment so that it can work. Just FYI: If you get this old classic to run, new issues may arise. Known are the "mss32.dll" runtime error (you may need to replace this file with the newer version of SW:KOTOR 1) and the issue of video cutscenes (the games uses an obsolete video codec, Smacker - either you find an old *.) DLLS for it or have you convert movies in a modern format).

    In conclusion: get old games to run on software/hardware modern (it is not only a problem of BONE) is one of the most fascinating and rewarding challenges to a real fan. But do not expect it will not be easy "out of the box" (or simply insert a CD).

  • MP3-Info Extension (MP3Ext) does not not with Windows7 64 Bit

    Does anyone know why Extension MP3-Info (MP3Ext) does not work with Windows7 64 bit. I heard, that it works as expected with Windows7 32 bit, but I have only the 64-bit Version of Windows, so I can't check it out.

    In Windows 7 64 bits of the program can be installed, but the PropertyPage, icon Manager, and tooltips don't work.

    MP3Ext is an extension for Windows Explorer.

    It is a freeware program and can be downloaded with the source code in C++ here: http://www.mutschler.de/mp3ext/

    I'm not a C++ programmer, so the source code does not help me. But maybe someone can look at the code and can finally say, what's the problem.

    Help, please

    Alfg

    @uDJinGrey,

    I think you're wrong. At least for Windows 7 64 bit.

    You wrote: "go to windows Explorer, go to any mp3 file and right-click on it, then click Properties.

    "It should be a mp3-info tab, click on that.

    but there is no mp3-info tab .

    What you wrote is true for Windows 7 32 bit.

    The only solution is to recompile the Extension Mp3-Info (MP3Ext) with a 64-bit compiler C ++.

    The reason is that Windows Explorer is a 64-bit application and it cannot use the 32-bit dll from Extension Mp3-Info.

  • RoboHelp 11 is compatible with a 64-bit operating system?

    RoboHelp 11 is compatible with a 64-bit operating system?

    Moving to RoboHelp

  • Lightroom 3, 4 or 5 is compatible with a 10-bit display? I currently 3.6 Lightroom.

    Lightroom is compatible with a 10-bit display? I have a TN 19 "monitor and I am not satisfied with its results. I know there is a huge difference between my TN and a 10-bit screen, but should start to narrow down my choices.

    Lightroom has not (yet) support a 10-bit display pipeline.

    In any case, I would say 10bits ability brings us back on the list of priorities. What it does is to replace the 256 discrete steps of tonal with 1024, thus reducing the risk of Posterization/bands.

    A monitor that can be hardware calibrated by adjusting the internal circuits of the monitor in depth low (as opposed to in the video card calibration software), will not display the strips in actual use. It simply isn't a problem, and all 10 bit is somewhat an exaggeration of the IMO. But it requires a good (and probably expensive) monitor, like an NEC or Eizo. They are usually capable of 10-bit, but it's not essential.

    Some cheaper models can be hardware calibrated, as the U2413 of Dell and some others, but they have their own problems such as uneven lighting and so on. 10-bit won't help you with that.

    Get a good monitor, it is well worth the expense. That's the key.

    Photoshop has 10-bit support in Windows, but it is not quite live to exaggeration here either: https://forums.adobe.com/thread/1295887

  • Win2K8 - this processor is not compatible with the 64-bit mode

    This is my first shot to create a virtual machine VMware

    We just got a new server in a data center

    Its windows 2008 Server. (the 64-bit version)

    My plan is to run a Server 2008 ontop of a host of Server 2008 virtual machine

    First I used a converter for P2V - this bit has been successful, so basically I took a picture of the host and converted to a Virtual Machine.

    I put the image to use 1 core of the dual core CPU and the memory (4gig) half and half of disk space on drive D (50 GB)

    Then I installed virtual server 2, and any

    Then I installed the thing that makes you see the window in Internet Explorer (some may be active x thing?)

    In any case, at the time of starting the server VM, I get the message:

    -


    Windows Boot Manager

    Windows could not start. A recent hardware or software change might be the cause. to solve the problem:

    1. Insert your windows installation disc, and then restart your computer

    2. choose your language settings

    3. click on repair your computer

    If you do not have the disk contact sys admin...

    file: \windows\system32\winload.exe

    status: 0xc000035a

    Info: attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

    -


    I'm a little confused on this, the server is located in a datacenter somewhere and I don't think that the CD option is viable, because they will probably be responsible for a lot of things to do

    Any ideas what I should try?

    the cpu is 64-bit but because I split at the image, I'm not sure if that is break things

    Any advice appreciated

    Thank you

    You can run virtual servers, they simply can be 64-bit because your processor doesn't support VT

  • The wizard of the driver NI-VISA creates drivers that are compatible with the 64-bit Windows XP/Vista version?

    The wizard of the NI-VISA driver creates drivers that are compatible with 64-bit Windows XP/Vista?

    InfiniteNothing-

    If you use a 64-bit compatible version of the NI-VISA driver, then the Assistant of the Driver NI-VISA is expected to create device drivers compatible 64-bit running in 32-bit mode.  You can find the various drivers of NI-VISA at http://joule.ni.com/nidu/cds/fn/p/sn/n23:1640/lang/en.

    Take care!

  • Mp4video.AX is not compatible with windows 64-bit?

    I installed the easy batch file on my windows7 32 bit machine these codecs. Came home and it will not install on my laptop. After trying to run it as an administrator, many times and many ways, still no luck.

    The only thing I can think is that the machine on which it does not install a 64-bit version of windows 7.

    I need to install these codecs so that I can print pictures of nice guys who do all kinds of damage to an investment property. I would REALLY go to life tomorrow with some images of these losers.

    Its a Zmodo DVR h.264 which is encoding the video to mp4.

    Hi Darrell44095,

    Thank you for writing to Microsoft Communities. From your problem description, I understand that you are unable to install the computer Mp4video.ax on a Windows 64-bit codec. Please correct me that I misunderstood.

    Darrell44095 , I understand how it could be frustrating when things do not work as expected.

    I recommend you contact Zmodo by clicking on the http://www.zmodo.com/supports/ link, and I'm sure they will help you download the correct codec pack for your device.

    If you have problems with Windows it please let us know and we will be happy to help you.

  • Is Photoshop CS5, which I am currently using with Windows 7 Pro 64 bit, also compatible with OS 64-bit Windows 10?

    Hello

    Currently, I use Photoshop CS5 with Windows 7 Pro 64-bit operating system.  I love the CS5 and need not upgrade to CC products.  I also think to buy a new PC with Windows 10 64-bit OS.  What is my Photoshop CS5 works with Windows 10?

    In addition, if CS5 is compatible with Win 10, must I first uninstall CS5 on my current computer before you install on the new machine, or can I just use my CS5 disk to install directly on the new PC with Win 10?

    Thank you

    Richard

    No need to uninstall CS 5 old machine. it is very very important to turn off activation in the menu helps to record the number of activations.

    All individual applications can be activated on 2 machines. Regarding the number of activations for more details, you can check with the help of Adobe once and get confirmation.

    Hmm, what about compatibility... cannot say it is completely compatible, but you can give a try. most of the cases, it works fine, but we cannot guarantee or say how it will work smoothly or can be installed on Windows 10 without any problem.

    If you face any problems with the installation disc, you can download at the bottom of the link:

    Download Adobe Creative Suite 5 products

    If you get an error, we are here to help you 24 * 7

  • lifeveiw 32-bit video fly application driver is not compatible with xp 64 bit and driver update is not available with the manufacturer

    tell me how to change the compatible driver in my bit of xp professional 64 window.

    Hello

    Device drivers designed for the 64 bit version of Windows do not work on computers running a 32-bit version of Windows.

    You must contact the manufacturer to improve the assistance on the issue. Link: http://www.lifeview.com.tw/html/contact_us/contact_us.htm

  • Digital archiving is compatible with Windows7?

    I have an OfficeJet Pro L7780.  I upgraded to Window7 and I try to get a digital archiving working again.  I have everything set up on the side of the printer, but I get a message that says "disk is maybe full or file is write protected."  I tried to share the folder, but it seems that I can only select users.  I chose not "Everyone", but this still does not work.  I tried to put the IP address of the printer, but that failed too.  What can I try?

    Thank you

    Keith

    Hi Keith,

    Windows 7 not compatible with digital archiving.

    More likely the problem caused by a wrong setting of sharing the operating system:

    In the control panel (Display icon), select network and sharing Center, click change advanced sharing settings in the left pane.

    Make sure to change the network profile settings (more likely home or work):

    Make sure power network discovery.

    Ensure that uses and printers sharing enabled

    Be sure to turn off password protected sharing

    Next to the sharing settings, check the settings of file as well:

    Right-click the shared folder, and then click Properties.

    Be sure to set control for everyone as well in the sharing and security tabs.

    In my view, only one of these parameters can make the difference.

    It will be useful,

    Shlomi

Maybe you are looking for