HP CQ61-313US posible memory upgrade configurations?

I have this laptop: HP CQ61-313US (with Windows7 64 bit) (card mother AMD = SKU: 577064-001)

Origin this model laptop has 3 GB (1 GB x 1 + 2 x 1 GB) memory DDR2 800 MHz PC2 6400 S.

Now, I would like to upgrade memory a little bit, and according to the specifications (manual booklet to print and pdf) it is (recommended?, recommended?, applicable only?)  configurations of memory upgrade - here's the Manual:

2 SODIMM slots

Customer-accessible/extendable

PC2-6400, 800 MHz, DDR2

Supports dual-channel memory

Supports up to 8 GB of RAM, in the following configurations:

8192 MB (4096 × 2)

4096 MB (2048 × 2)

3072 MB (2 048 × 1 + 1024 × 1)

2048 MB (2 048 × 1).

2048 MB (1024 × 2)

1024 MB (1024 × 1).

As you can see only 6 GB isn't on the list, which is incomprehensible to me, particularly because you can combine 1 GB x 1 + 2 GB x 1 to get 3 GB, but not 2 x 1 + 4 x 1 for 6 GB GB GB as I would like.

So basically my question should be: is it possible to install 6 GB memory 2 GB x 1 + 4 GB x 1 on this motherboard despite the fact that it is not mentioned in the manual configuration?

If YES, then what configuration would be better: 6 GB (2 GB x 1 + 4 x 1 GB) or 4 GB (2 GB x 2)?

You are the very welcome.

I agree entirely with you suggestion.

Tags: Notebooks

Similar Questions

  • Question by PE R710 memory upgrade configuration.

    Hello team,

    We currently have 18 x 8 GB of memory on our server.

    We decided that we will upgrade the server with more memory. We think of this scenario:

    • leave 12 x 8 GB
    • Add 6 x 16 GB

    This should give us 192 GB of memory.

    This configuration of memory will work?

    Thank you all, sincerely.

    StorageJohn,

    This will work as long as none of the DIMMs are quad ranked. This is due to the limitation that you can use only 2 of the 3 DIMMS per channel when they are class quad. Now so that these to work, you will need to place the bars 16 GB in white tabs slots DIMM, then the 12 8 GB DIMMS into the slots of the black tabs. That should allow you to work.

    Let me know if it helps.

  • Dell PowerEdge T310 Memory Upgrade configuration

    Hi all

    Currently I have a T310 with 2 x 4 GB memory

    Information about the DIMM:

    (Hynix 4 GB PC3-12800 DDR3 - 1600 MHz ECC Registered CL11 240 - Pin DIMM memory rank double Module Mfr P/N HMT351R7CFR8C-PB)

    I intend to add with a total of 6x4Go = 24GB 4x4GB

    This new configuration of memory will be supported?

    Thanks for the reply

    See more info on the server below;

    Server has 1 CPU (Xeon x 3430 @ 2.40 Ghz)

    Memory information: Ok

    Attributes of the bars of memory

    Attributes; Memory Matrix 1
    Location; Motherboard or motherboard
    Use; System memory
    Power installed; 8192 MB
    Maximum capacity; 32768 MB
    Available slots; 6
    Locations used; 2
    The ECC type; Multibit ECC

    Total of bars of memory

    Attributes; Value
    Total installed capacity; 8192 MB
    Total available power to the BONE; 8192 MB
    Total maximum capacity; 32768 MB

    Table 1 of the memory details

    Status; Name of the connector; Type; Size
    OK; DIMM_A1; DDR3 - synchronous registered (buffered); 4096 MB
    OK; DIMM_A2; DDR3 - synchronous registered (buffered); 4096 MB
    Unknown; DIMM_A3; [Not busy];
    Unknown; DIMM_A4; [Not busy];
    Unknown; DIMM_A5; [Not busy];
    Unknown; DIMM_A6; [Not busy];

    Device memory information: Ok

    BRIEF on connector: DIMM_A1

    Attributes; Values
    Situation; OK
    Device name: DIMM_A1
    Size; 4096 MB
    Type; Synchronous DDR3 registered (buffer)
    Speed; 0.63 ns
    Failures; None

    Device memory information: Ok

    BRIEF on connector: DIMM_A2

    Attributes; Values
    Situation; OK
    Device name: DIMM_A2
    Size; 4096 MB
    Type; Synchronous DDR3 registered (buffer)
    Speed; 0.63 ns
    Failures; None

    Components (FRU) Information System

    Device; Serial number; REF.; Revision; Reference of the manufacturer; Date of manufacture
    System Planar (BMC); CN1374008602B7; 02P9X9; A00; DELL; Mon Aug 09 04:00 2010
    1 power supply (PS 1); CN1797208E0NQR; 0N884K; A00; DELL; Mon 16 Aug 10:25 2010
    DIMM_A1; 4B55A111; HMT351R7CFR8C-PB; S/O; Hynix Semiconductor (00AD04B380AD); Mon Apr 09 16:00 2012
    DIMM_A2; 4B15A14C; HMT351R7CFR8C-PB; S/O; Hynix Semiconductor (00AD04B380AD); Mon Apr 09 16:00 2012

    You can always memory of control similar to the one you already based on the part number. Also check the link below for memory other compatible Dell:

    http://Accessories.us.Dell.com/SNA/category.aspx?category_id=8136&c=us&l=en&s=BSD&CS=04&mfgpid=203788

  • Veriton M498G memory upgrade problem

    I'm trying to age 5 years Veriton M498G memory upgrade my son of 4 GB to 12 GB now when I upgaded to Windows 7 64 bit.

    The original 2 GB key still works fine and the 2 GB key that I added back a bit works very well too (4 GB total).

    But when I remove all the sticks and put in a new 4 GB stick the computer crashes in the POST just after the BIO 1024Mo of RAM (!). Looks like that the BIOS does not like the 4 GB stick! Compensation of the BIOS did not help.

    Back original memory makes the computer works perfectly.

    I am well aware of the memory manufacturer/type compatibility issues.

    I tried 4 different memory of 4 GB sticks from 2 different sources with no luck.

    My questions are:

    1. the Veriton M498G motherboard or BIOS has any limitation on the size of the memory card?

    2 I missed a setup or configuration to let the BIOS see the 4 GB memery stick?

    3. a more recent BIOS help? (the computer uses the original BIOS from 2011)

    4. is there a solution runs the endless trial and error of purchase and return of USB keys?

    The system is:

    Acer Veriton M498G

    Processor: Intel i3

    S/N: PSVAQ03005 *.

    MFG date: 18/01/2001

    Thanks for your help.

    Michaud

    [edited for the protection of personal information - please do post any personal or unique information such as but not limited to all names, email addresses, telephone numbers, full of serial numbers, etc.]

    Hello

    The crucial memory modules too.

  • Dell PowerEdge T610 (memory upgrade)

    I bought Dell 16 GB certified replacement Memory Module for select Dell - 2Rx4 1333 MHz RDIMMS LV systems

    Currently, I have 8 GB of RAM (1 GB on every slot machines). After I installed this new memory and restart the server, it shows invalid memory configuration. So, I changed the memory setting in BIOS 'Advanced ECC' to 'optimize memory '. But it detects more than my current speed of the memory is 8 GB. Is there something wrong with the configuration of the memory? I tried to re - establish the new RAM.

    Help, please. Thank you.

    Hello.

    Your memory configuration is not valid because the channel memory CH0, is not balanced with channels CH1 & CH2. Refer to the schematic illustration below:

    In order to balance the memory on these channels, we should have memory DIMM in:

    A1, A2 & A3 = B1, B2 & B3 in addition also A4, A5 & A6 is B4, B5 & B6. That's why CH0, CH1 & CH2 memory modules must be identical for the performance and optimal memory configuration. Depending on the upgrade amount of memory you are looking for, you can buy 1 more 16 GB DIMMS and then fill in slots A1 B1 & offer a total capacity of 32 GB. This will provide more flexibility for future memory upgrade

    Let me know if you have any other questions.

  • Pavilion Elite HPE-170f Deskto: Memory Upgrade

    I have the HP Pavilion Elite HPE-170f desktop.

    Motherboard: Pegatron IPMTB-TK (Truckee)

    Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

    Storage media: 6 x DDR3

    Memory type: Types DIMM PC3-8500 (DDR3-1066)

    I currently have 8 GB of memory.

    What is the maximum I can install?

    Operating system: win 10 Pro 64-bit

    Thank you

    John

    @jmwright1058

    Memory upgrade information

    • Architecture memory triple channel

    • Six DIMM DDR3 240-pin connectors

    • Supports types DIMM PC3-8500 (DDR3-1066)

    • Memory non - ECC, unbuffered

    • Supports DIMM DDR3 4 GB modules

    • Supports up to 24 GB on 64 bit computers

    • Supports up to 4 GB * on 32-bit computers

  • HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

    < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

    Chassis: HP Compaq 6000 Pro Compact

    Processor: Intel Core 2 Duo @3. 00 GHz

    RAM: 2 x 1 GB

    OS: Windows 7 Pro 64-bit

    I can add more technical info on request.

    Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

    Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

    So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

    DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

    I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

    I decided to get 2x4gb and upgrade later if I felt the need.

    I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

    BEEP BEEP BEEP BEEP BEEP!

    I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

    So I changed the RAM of DIMM 2 DIMM 3.

    Once again, the annoying ringtone.

    I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

    I tried a lot of different combinations with the end result is 5 annoying beeps.

    After that I thought that maybe, just maybe, an update of the BIOS can change things.

    So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

    I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

    I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

    I read the forums here, but I couldn't find a thread with a solution for me.

    Is there anyone on this forum who could lend me a helping hand?

    Any information would be gladly appreciated.

    PS Please report any stupid error, I did. Stick and stones could not curb my bones.

    Hello:

    See this related post... the elite 8000 is basically the same model as the Pro 6000.

    Resources memory very finnicky needs...

    http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

  • Max Memory Upgrade for Pavilion a810y

    How can I find the AMT of max memory I can put in my Pavilion a810y?  It of sites that say 4 GB and other telling that to 2 GB.  Is the real answer please stand up.

    Hello:

    Your PC would have the Intel 915 chipset.

    If the motherboard has no memory, each with 1 GB of memory, 2 slots then you're at the max.

    Locations of Intel 915 chipset memory cannot manage more than 1 GB of memory.

    The crucial memory upgrade link I posted said your PC had 4 locations of memory, so that the info is wrong.

    If you upgrade to W7, I recommend you only go with the 32-bit version on your PC.

    A 64-bit system requires more disk space and memory to run as a 32-bit system doesn't work - not double, but, with only 2 GB of memory, a 32 bit OS will perform a little better that will be a 64 bit OS, but who is to you.

  • AIO Touchsmart PC Pavilion: memory upgrade for hp Pavilion aio Q112

    Hello:

    I just very, very recently bought a HP Pavillion 23 Touchsmart computer and it has 4 GB of RAM, I am keen to get the WHOLE 16 G for it.  However, I believe to be unable to find here anywhere on the HP Site.

    Can someone help me please?

    Thank you

    Mary Beth

    Hello

    Information for the RAM:

    Memory upgrade information

    • Memory channel architecture

  • Pavilion 500-424: memory upgrade

    My memory may be improved? I'm now 8 gig.

    Hello

    Yes

    Memory upgrade information

    • Memory channel architecture

  • Pavilion G6 memory upgrade

    I'm looking to upgrade to 4 GB memory on my g6 pavilion laptop, but want of memory site to know what version of the g6, IE there are several dozen computer laptop g6-xxxx numbers of model in the list, so he can advise the best elements.

    The pages of OS system information and Device Manager the list just like a g6 pavilion, and the physical label on the back of the camera is not even go that far.  It does not list the item such as a 584037-001, whatever that means.  How can I know which (the suffix xxxx g6) my g6 is in fact so I can identify the best modules of memory for an upgrade?

    Davdik10

    You have a laptop HP Pavilion 2002au g6. Unfortunately you happened to choose a laptop that is not so simple to upgrade.

    You will need to contact an online memory provider and ask them for help to find a guaranteed compatible 8 GB upgrade or buy the upgrade from HP.

    Search for suppliers of memory online using Google or Bing and ""memory upgrade HP Pavilion g6-2002au ' as keywords. " I strongly recommend that you don't settle for anything memory compatible modules less guaranteed by well known memory manufacturers.

  • Compaq Presario CQ61-313US: replacement of the CPU Compaq Presario CQ61-313US

    I have a laptop Compaq Presario CQ61-313US VM367UA #ABA that I am refurbishing and it must have replaced CPU. It comes stock with a CPU AMD Anthlon II M300 and I wonder if I can replace it with a CPU AMD Anthlon II M340 since they are the two socket S1, 35W TDP and they were released at the same time, so I think that the firmware should support two processors. I build that several desktop computers and laptops repaired but I traded not portable CPU oout before any info would be appreciated.

    I would say that you were right, because I have worked with several CQ61 CQ61 - 415st comes with this CPU.

  • HP 19-2114 Memory Upgrade

    I recently had a 19-2114 all-in-One PC HP free and I discovered that I can improve my same 4 GB to 8 GB and 16 GB memory. I was wondering where I can buy 8GB memory upgrade because I was looking on Amazon and I found that the improvements of memory of 8 GB there are compatible only with certain models (HP 19-2050 or lower).

    Hello

    Please try:

    http://www.crucial.com/USA/en/compatible-upgrade-for/HP---Compaq/HP-19-2114-all-in-one

    (Don't look at the picture) And the video folloiwn can help:

    https://www.YouTube.com/watch?v=DQVZac2h_U8

    Kind regards.

  • HP 23-r013a: memory upgrade

    Hi again, my request earlier re: memory upgrade compatible I will still have trouble finding one that suits! I think the exact details and then it tells me that it is for a laptop or a Mac? Even when I type in desktop! I contacted a vendor thinking they would know and he asked me what my computer is 14 or 15? Please help taken from Cheers L DDR3 SO DIMM 204-pin PC3 12800 1600 mhz PC3 14900 1866 mhz

    Hello

    Your device supports (because there CPU A4-6210). :

    Memory upgrade information

    • Memory channel architecture
  • HP 21-2014: HP 21-2014 in a computer, Ram memory upgrade question

    Hello, I have a HP 21 2014 all in one computer. He now has 4 GB Ram memory and an AMD processor. I was wondering how it would be possible to increase the Ram up to 8 GB. Is there a certain number of model or brand of Ram do I need to buy? I looked a few things on Frys Electronics, but obviously I'm naïve. I really want to upgrade memory because I have some games which really lag on this computer, even if it is new, and I know it takes more may work properly. I wanted to see if someone can point me in the right direction. Price is not really a problem, I just want to know what would be a better job for this specfic HP model. Thank you!

    Hello

    Yes, you can upgrade to 16 GB:

    Memory upgrade information

    • Memory channel architecture

Maybe you are looking for

  • "dialog placeholder" message in iTunes Store

    When I try to log in my account on iTunes store, I get a message stating "dialogue space" reserved screen  There is no where to enter my username and password.  When I hit the button submit at the bottom of the screen, it says I have to enter my ID a

  • Impossible to install Toshiba Media controller on the Qosmio X 500

    Hello, I downloaded TMC 64 bit from the Web from Toshiba website. When I run Setup I get the message 'Media controller cannot be installed on this computer.I run W7 64 bit. Thanks for help.

  • Satellite P100-307 Exchange HARD drive help/advice needed

    Hello Thanks for your recent advice on exchanging my 200 GB HDD in to a 500 GB Sized HDD. Can you please let me know what I should do with the new HARD disk, so that my P100 can recognize (I format etc.)? I would like the existing to the new mirrored

  • Which camera to photograph the paintings and then print postcards and greeting cards?

    I currently have a PowerShot SD600, but maybe I need a new camera for my purpose.  Those who would work for my application? I paint with acrylics and the pintings out for between 1 ' x 2 ' and 4 ' x 4 '.  I want to take pictures of them in order to h

  • Update BIOS killed the headphone

    First off, this is the problem - I have a vostro V131, i5-2430, running win7 x 64. Earlier today, I flashed the BIOS A05 to A06 (downloaded from the dell support page). Everything works well, and my laptop speakers work fine as well, so I'm not alert