HP Deskjet 1050: Deskjet 1050 does not work with my new laptop

Similar Questions

• Software BlackBerry BBLink does not work with my new laptop Windows 8

  I have a new laptop running Windows 8.1 and installed BBLink.  However, it is not synchronized with my camera of Q10.

  I removed the BBLink device on my old laptop, but it still does not.  Get an error that says "failed to connect MAPI. Run outlook with the "outlook" profile, and then try again.  My profile is "prospects", so I don't know why I get this error message.  I also tried to reset my Q10 to factory settings and start again with BBLink, but I get the same error.

  A that someone has experienced this problem?  Do you have suggestions for how I can get my contacts and calendar sync?

  Thank you.  I was able to get this problem solved, after that I restarted a couple of times.

• DeskJet 712c does not work with Win 7

  I recently switched to a new win 7 Home Premium SP1 (64) my old XP computer which worked well with my printer.  The printer does not work with the new OS and the computer.  Even if the computer indicates that the device is functioning normally, the printer will not accept print orders.  Not even the printer print test.  There is no error reports but the system behaves as if the usb is not connected, even though it is.   There were no changes in connectivity before or after installing new software (or trying) trying to get the new computer set up.

  I just found it and tried the wizard of the printer which also implies that the usb is not connected even though it is.

  The compatibility options have done nothing to help.

  Tara,.

  EUREKA!  At the risk of party too early, it seems that I am able to print with my new computer (HP).  Fixed after almost endless hours trying to get my printer to work despite many internet messages saying it could not be done and other giving solutions that didn't work.

  Why o ' why the solution apparently a hidden secret and why the tools did not work?

  In any case, thank you very much.  With all the problems I'm having to migrate to Windows 7, it's a very important achievement.  Thank you, thank you.

  Chuck

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• my hybrid HDD/SSD drive does not work with my new Y50

  my hybrid HDD/SSD drive does not work with my new Y50

  Help!

  Hi YouMaCry,

  You have any records? or a USB recovery?

  If you cannot install an OS on your SSHD your SSHD can be defective, because it is reading it is cluster/bad sectors. A defective HDD/SSD/SSHD can still be detected (sometimes even when it is defective).

  To be sure contact Lenovo Support Center and ask them to send you your SSHD/unit in a get fully tested Lenovo the SSHD repair depot - and have defective parts repaired within a reasonable time!

  See you soon

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• Family safety does not work on a new laptop with windows 8 preinstalled

  Hello, I previously used Family Safety (FS) on my daughters netbook and it worked very well. I took my cell phone account that she does not have an account on. So for Christmas we he bought a new laptop (win8) of full size. I created myself as the admin, and him as a standard user with a different username than its netbook, and I configured FS for the new account on the new laptop. Well, I am not sure if more FS works on the netbook, but I am sure that it does not work on the new laptop to 100%. I tried over and over reconfiguring, sometimes it won't save even my applications updated. It simply doesn't get it. The only thing I can think is that, in the implementation of his account, it doesn't have an e-mail address, and I was forced to create a local account. Could it done than the FS functionality?

  Hi, I had family security to work by removing the local account that I wanted to monitor and adjust it upward with a hotmail instead of just local account. Family safety has started working immediately and exactly as expected. I always think that theres a problem when people are trying to implement local accounts. Thank you for trying to help me in any case, if I need help in the future I will contact you guys once again.

• Satellite A110 - switch WiFi does not work with the new WiFi card

  Hello everyone

  I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work.

  New wifi card is discovered and drivers to the correct job but when I try to search with the Intel Pro/Wireless software wifi networks I message to turn on hardware switch, but there light and not work. The old wifi card swich works OK - orange light is on. On the new map light is off and swich does not work.

  Help, please

  Hello

  Do you have also enabled the WLAN functionality by pressing FN + F8?
  Check it!

  In addition, I think the case is clear: the new wireless LAN card isn't compatible with Satellite A110.
  So in my opinion, you must use remove the new card Intel and install the old card that works fine in your laptop.

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• 128 - GB MicroSD card does not work with the new Clip +.

  My old Clip + (black, 8 GB) was getting very long in the tooth, so I ordered a replacement off Amazon.  As far as I know, it is identical to the old, but a very unpleasant difference is presented - it does not work with the MicroSD card which has been a huge part of why I got a Sansa at all.  He acknowledges, but after a media updated I'm lucky if more than one album appears.  And that's what's so crazy!  You just blow through the update in a few seconds, and when I navigate on the map, there is nothing or a handful of albums random, orphaned.  That's happened?  I updated the new Clip + for the current firmware (as I had done with previous); I made sure to reproduce all the parameters that I would be put in place before--I can't imagine what could be the cause!

  Treats quick closing:

  The card is formatted in FAT32 with the same sector size in storage aboard the player (32 768 bytes).

  A 64 GB card format works even without any problem.

  I tried to update the media in MTP and MSC mode; the problem is the same in both.

  There is ample space for MTABLE. SYS - I have not yet loaded all the music on the Clip + itself.

  Rockbox plays the card without problem, but the sound quality is horrible (at least on this player; I'm sure that other versions sound best), and its interface is a headache.  No thanks.

  HM.  Looks like to run CHKDSK /F on the map the problem resolved!

• little emoji and emoji does not work with the new iOS update

  After installing the new iOS does not work. I uninstalled two emoji and re-installed. Does not work. Ideas?

  bitmoji has just released a new update today to correct this, check the app store for the update.

• My Norton anti-virus software used to work and now it does not work with the new Firefox update. This corrected soon? Otherwise, I will not use the product

  Since your last update that my Norton toolbar will not work... If it does not work, will not use your product. Can it be fixed quickly?

  According to the article, I linked to before, you will need to update the norton version 2015.2.1.13 toolbar that is compatible.

• RoboFrom does not work with the new version of firefox v30.0

  My Firefox has been updated on 10-06-14 and now my RoboForm does not work

  Version 7.9.7
  http://www.RoboForm.com/platforms/Windows/Firefox

• Satellite L40-143 - WLAN does not work with the new router

  WLAN on my Satellite L40-143 does not work since I Modem Alice-1121.

  Who can help me, please!

  Hi kenny_21,

  If you have a new WLAN router you must change the configuration that I think

  The new router is visible under WLAN connections and can connect?

  If so try to connect. The standard router password can be found in the manual of it and no doubt, there will be new addresses MAC first before connect you. I put t know the exact configuration.

  Also check the options the WIRELESS card with TCP/IP. Usually, you need automatic IP addresses.