HP Deskjet 2050 all in one J510series

Similar Questions

• DeskJet 2050 All - in - One J510a: outside the printable area

  Hi all

  I use-

  W.7, Ultimate, 64-bit.

  Name of the model: Deskjet 2050 All - in - One J510a
  Firmware version:... SLM2FN1006BR
  Serial number:... CN0BD3F28805D1
  Service ID:... 21074
  IK No.:... 670
  Software version:... 028.000.1313.000
  The printer driver version:... 09.84.00.1189

  When you use Word, in Office 2010, I have margins set to 'Normal ' -.

  Top: 0.98 "low: 0"

  Left: 0.12 "right: 1.18"

  Whenever I have insert a border around my text and that you try to print, I was informed that section 1 page borders are defined"beyond the printable area of the page. Do you want to continue? »

  By clicking on 'Help' I read and follow all the different "solutions" available. None allow the page to print.

  I selected all of the selections of available margin different and even selected some of my own under the "custom margins. The page to print with border permits.

  For example, one that I tried was-

  Top: 0.06 "low: 0.57"

  Left: 0.12 "right: 0.13"

  I then clicked on 'Options' under 'Page borders.'

  to the "measure of" I chose "Text" once more, I was unable to print the page with the border!

  I find this very frustrating, and I can't find a solution.

  I would be very grateful if there is a known workaround that will allow me to print a Word document with a border selected.

  (I have no technical experience, and if there is a soluition, I'd be happy to get detailed instructions!)

  Thank you

  ColinX

  Hello

  Your printer can print without margins (IE margin = 0 ").  This printer can print only to a certain margin.

  bottom margin is 0.57 ",
  top margin is 0.06 "
  and the left and right margins are 0.125 ".
  
  So if you try to print beyond this margin, the impression will be cut or outside the printable area.
  
  Kind regards.

• DeskJet 2050 all-in-One - J510: how to print without borders?

  I try to print my project on paper to A4 borderless, but it seems that no matter how to change settings, the results still had a border. Can someone give me some advice on how I could solve this problem?
  
  I print on Word, and my printer is HP Deskjet 2050 all-in-One - J510a.

  Hello.

  The deskjet 2050 printer does not support printing without margins, as you will find by notebook loads below:

  Without borders: No.

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA1-1465EEE.PDF

  This material allows to print only to a certain margin.

  The lower border is 0.57 ", the top border is 0.06 'and the left and right borders are 0.125. any impression beyond these margins is cut off due to the limitations of harware.

• DeskJet 2050 all in one J510: installation HP deskjet 2050 all-in-one with windodws portable

  Hello

  Top of greaded for the new laptop that has windows 10 and can not get my printer to be seen.  When the printer is connected through the USB port, computer laptop just scan, load an application for wireless use won't see or interact with the printer as the device is not a wireless model, (only 5 years).  printer still works great on Windows 7 laptop, but the laptop keeps freezing as is the reasosn for the upgrade.

  Question is how to make the new laptop to use my printer?

  I still have the domain controller that came with it, but it will not work installation on the laptop W10.

  Help, please.

  Thank you

  Denise

  @ladyzq

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you did not, please install the software of full functionality for the printer.

  and / or

  • Start here: HP Print and Scan - Doctor help solve printer problems

  Printer, one of

  "Deskjet 2050 all in one J510 ' (5)

  Full software functionality (the printer program):

  Name of the file:

  DJ2050_J510_1313 - 1.exe

  (49.0 MB)

  Help, suggestions and examples:

  Install the full features software - printer

  Operating system recently migrated to Windows 10 and re - install the printer software:

   

  1. If you use a USB cable to connect the printer and the computer, disconnect the cable
  2. Create a Restore Point >
  3. Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  4. This works best if the updates of Windows (10) computer are up-to-date - check if you are unsure
  5. Update your drivers HP (or another computer of the seller) - printing software like updated drivers
  6. Open printer pilot site support Page >
  7. Download a new copy of the Full Feature software >
  8. Remove the printer from programs and features existing software / applications and features / all Apps / devices and printers >
  9. Shut down the computer > start and connect >
  10. Install the full feature software (find in your downloads folder > double-click the file) >
  11. Restart the computer and log in to complete the installation

  Article (s) of interest include:

  • Start here: HP Print and Scan - Doctor help solve printer problems
  • Preparation
  • Extras, tips and some Cool stuff > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printing software (two parts)
  • Download and Installation
  • Integrated webserver (EWS)
  • 10 Windows updates (check)
  • Restart all
  • Analysis of the Options of program *

  ** Cool independent scan programs (thanks to greenturtle for links to HP extended Scan!)

  Reference:

  Options of the digitization program

  Sections of the document include:

  HP Extended Scan - Single, multiple scans, automatic framing!

  NAPS2 - not another scan PDF

  And others...

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• Print on both sides, Deskjet 2050 all-in-One J510a

  Hello

  I have a Deskjet 2050 All - in - One J510a and I just realized that I can't manually print on both sides simply because this function does not exist on the print menu in the Properties window.

  So, how can I print on both sides?

  Thank you

  Gil

  So I guess I should be a REP from HP because these guys are not answering the question? If you go under Printer Properties Advanced there is an option to print only the even or odd, pages print the odd pages first and then put the paper in the printer, go to print click on main pages and bam there you go.

• How can I download my HP Deskjet 2050 All in One series J510 on my netbook without disc

  Is it possible to download my HP Deskjet 2050 All in One J510 printer on my netbook without disk? I really need to print things because my main computer's in the shop. Any help would be greatly appreciated. Thank you. Sincerely, Lisa Horsmon

  Hello

  the software to install your printer can be downloaded here...

  http://h10025.www1.HP.com/ewfrf/wc/pfinder?CC=UK&DLC=en&LC=en&tool=&query=DeskJet+2050

  .. you will need to select model 510, 510 or 510g depending on what model you have.

  Tricky

• Start printer problem. HP Deskjet 2050 all-in-One J510 series. Part No. CH350A

  Whenever I first turn on printer it prints a page immediately and said that I need to scan the page and to realign it.  In addition, the colors are a little faded looking.

  Hey RedDave,

  If the unit is every time you start printing, an alignment to the top page, the device fails to align.  If the unit fails to align, then it will try to do it on the next start up.  Do you have a message that failed the alignment on the computer screen?

  I recommend following the steps described in the document following the link to resolve this condition in your Deskjet 2050 J510 series all-in-One.

  'Impossible alignment' Error Message is displayed on the computer

  Let me know how it goes,

  Jason

• I can't understand how to connect my hp deskjet 2050 all in one printer to my new macbook pro?

  It keeps saying that the installer cannot install the operating system on my computer (only 10.6 and below). Help?

  Then try to install it with the HP driver:

  • HP Deskjet 2050 - drivers and full software features - Mac OS X 10.7, OS X 10.8

  * Click the stars KUDOS to say thanks

  * Click the acceptable Solution if its resolved.

• EHF softwere for installation of hp deskjet 2050 all in one is not compatible with windows 8 sofare

  I tried to install diskjet hp all-in-one on the evaluation of windows copy b

  Build 8102 but certainly not what I can do

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

  It will be useful.

• Print wireless HP Deskjet 2050 all-in-one

  Sometimes I can use my printer to print from another room using my laptop. It always seems to print but when I go to the printer, nothing has changed. Other times it prints very well! What is going on? Use Win7 64 bit.

  Help, please.

  Dave

  What is the number of real product on the back of your printer?

  I watched the Deskjet 2050, and it does not have wireless capability.

  Are you sure that you connected before wireless?

• DeskJet 2050 All - in - one J510e: 2050 delayed printing

  I have a printer HP 2050 on which I put a print job, but it does not print until the next time it is turned on.  I can't analyze also, I use an Apple.   Assistance would be greatly appreciated

  My deepest gratitude for your help, I had to move the printer to a position closer to the outlet, so I ignore completely the power supply Board.  I can finally get a result when I need to print.

• HP Deskjet 2050 All in One series J510

  Had to install my printer on W7 (x 64).
  The installation disc is now a few years old and while it works always,.
  When l get the menu up, all it shows is "see what's printing", "set preferences"
  and "customize your printer.
  There is no mention of checking ink levels or even to make a scan.
  I know some time ago l had to rebuild the system and someone posted a link to install
  a version update from the menu.
  Any ideas?
  Concerning

  Great, thanks Kevin.

  Everything seems how it should be now.

  Kind regards.

• print on both sides, deskjet 2050 all-in-one

  base of this printer driver cannot print (manually) on both sides of the paper.

  Is it possible with the complete hp software?

  Make a mistake? can help?

  Best regards

  Tommao

  Hi Tommao,

  The pilot allow you to print on both sides of the paper using the Pages to print feature. The same functionality provided by HP software full functionality as well.

  The application allows printing, open the print dialog box

  Click Properties to access the Printing Preferences dialog box.

  Listed Pages to print the odd pages only and make the print job.

  Place the printed pages face down in the ADF and make another print job by selecting only the even pages.

  Kind regards

  Shlomi

• HP Deskjet F4280 all-in-one scan does not work. Start button / stop flashing when you press scan.

  Scan does not not on my HP Deskjet F4280 all-in-One.  The power button flashes when you press scan. Everything else works.  I tried to unplug it from the wall socket and reconnect it.  Not solve the problem. What else can I try?  Or, is it a piece of junk now and needs replacement?   My laptop (windows vista) did not go into repairs several months ago. Don't know if that had anything to do with it.

  Hi woodcarver60,

  Follow the steps outlined in the documents below to scan from the software.

  HP Multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03511921

  HP Multifunction printers - how Scan: Windows 7 http://support.hp.com/us-en/document/c03476857

  HP Multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03517146

  Scan from Windows XP software with the full functionality of HP for the all-in-one HP http://support.hp.com/us-en/document/c03517150 printers

  HP LaserJet multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03755019

  Scan from Windows 7 with full HP software functionality for all-in-one HP LaserJet http://support.hp.com/us-en/document/c03584750 printers

  HP LaserJet multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03584647

  HP LaserJet multifunction printers - how Scan: Windows XP http://support.hp.com/us-en/document/c03584350

  All-in-one printers

  Win 8: c03511921 http://support.hp.com/us-en/document/c03511921

  Win 7: c03476857 http://support.hp.com/us-en/document/c03476857

  Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146

  Win XP: c03517150 http://support.hp.com/us-en/document/c03517150

  Multifunction LaserJet printers

  Win 8: c03755019 http://support.hp.com/us-en/document/c03755019

  Win 7: c03584750 http://support.hp.com/us-en/document/c03584750

  Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647

  Win XP: c03584350 http://support.hp.com/us-en/document/c03584350

• New Deskjet F4185 All in One or any other printer Deskjet F4185 software needed, Pls!

  Hello world

  Can someone help me get a new Deskjet F4185 or any other printer Deskjet F4185 software.

  Your recommendation is much appreciated. Thank you.

  Hello andruanus,

  Take a look at this link.

  HP Deskjet F4185 all-in-One color inkjet - printer / copier / scanner