HP Deskjet 3050 device non-reachable

Similar Questions

• Want 4500: Device Configuration-> device non-reachable

  My new envy 4500 _IS_ on my network.

  My new MacBook Pro _IS_ on my network.

  I get to the configure step and everything looks good, until I get the answer below:

  "Device setup".

  0 select device

  0 confirm the anti-piracy settings

  O select network

  Device configuration

  The configuration results

  Non-contacted device

  TH wireless settings) have been downloaded successfully on your device. However, your Mac

  could not locate the device on the network.

  Please make sure that:

  • Your Mac is connected to a wired or wireless network that has access to your device.

  • Your device is connected to the wireless network ' network of current alternative.

  ' Fomorians of information online, visithftp: / /www.hp.com/o/wirelessprinting '

  This is the second HP printer that I am trying to set up makes the same "thing".  I thought the first was defective, so I traded for a different printer.  It has a display of control, so I KNOW it's on the network.  And I KNOW my computer is on the network, or I wouldn't be able to write this.

  But they refuse to talk to each other.  SO frustrating.  I'm willing to give up HP.

  Joe

  Found the problem.  HP printers do not support Wifi AC.  It would have been nice to know before I wasted 4 hours on 2 printers...

• HP D110 - device non-reachable

  I'm trying to set up my D110 for the wireless. I have a new Cisco Valet Plus router connected to the school network with WPA - psk.

  The Mac connects to the network and the printer connects to the network. But when I try to configure the printer wireless on Mac, I get "the device is not accessible. When I go to print the Fax & reset printers and click on the '+', no printers appear. I tried to uninstall and reinstall the printer drivers. I improved the Mac for the latest software updates, downloaded the latest HP drivers and restarted the router - still no printer. I was able to implement the same printer earlier with a different router and a similar Mac. And I was able to add the printer to the network using the Valet of Mac interface. It's like the HP drivers do not recognize the connection to the Jack. How can I get my wireless to work?

  Try to restore the default settings of the network

  (configuration > wireless menu > wireless settings > restore default network values)

  Run the Wireless Setup Wizard again

  (Configuration > wireless menu > wireless settings > wireless configuration wizard)

• HP Deskjet 3050 j610a scan error

  About a week ago my HP Deskjet 3050 multifunction j610a worked very well. However, sudden occurred a parsing error that can't be solved. Whenever I scan any document, the result is a totally black image with a lot of very thin vertical stripes on it. Changes color bands according to the type of analysis that I chose, they are white for the black and white scans or have several colors for the colored scans. Even without any document on the scanner, the analytical result is the same.

  I have uninstalled/reinstalled the software supplied with the device and did the same with the downloaded software from the HP site, but none of them worked.

  The Deskjet 3050 is connected to my PC (Windows 7 Professional 64-bit) via a wireless connection, but the problem also occurs when connected by USB cable.

  PS 1: The HP print and scan doctor found no no problem.
  PS 2: the print function of the unit works fine.

  Thanks for the clarification, because the same question appear while copying there seems to be a hardware failure of the scanner and not related to the software.

  Try following the steps below to solve such a failure, if the same continues contact HP technical support at the service of the unit:

  http://support.HP.com/us-en/document/c00587971

  in case the problem persists when you have completed all the steps listed, the phone number to contact HP is that by selecting your region and following techniques are supported after purchase below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Shlomi

• HP Deskjet 3050 J610 - error

  Printer has worked for a while and stopped working a few days ago.

  In the queue, I get an 'error' as the status

  I uninstalled the software countless times. installed from disk and downloaded the latest driver for my computer (macpro, OS X 10.6.8).)

  Also the switch cables & cartridges & it still does not work.

  Now when I open the HP utility, I get a message telling me that my computer components have been developed for another version & some features will not be usable. Then he told me to download the latest version of what I did several times. I had 3 HP printers connected tpo this computer 6 months & now none of them work, so I uninstalled all the software for all of them & focused on trying to get just the HP Deskjet 3050 J610 to work.

  I did Test the HP utility, which tells me that if it prints OK that the fault is the drivers or printing from my computer system. It does not print OK, and here, the solution is to install the latest drivers, which, once, I've done several times.

  Anyone else having this kind of problem? Or have any idea of what I need to do?

  Thank you.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with the 10.6/10.7 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Download and install this: http://support.apple.com/kb/DL907

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  Finally, download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

• Scan with HP Deskjet 3050 a problem - analysis only about a quarter of the page

  My HP Deskjet 3050 a wireless print fine with my Mac OS Lion 10.7.3. But whenever I scan something, catches sweep that results from only about a quarter of the page, which swells in size to take to the top of the entire page. (And I am regular sweeping 8 "x 11" documents. ") And I can't zoom in to get the entire page. When I try to change the setting in jpg to PDF utility, to see if that will solve the problem, the utility closes 'unexpectedly' every time.

  Hello
  First, install the critical update below:
  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg

  Now change the settings of the device as follows:
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• HP Deskjet 3050 J610a ePrint questions

  I have a HP Deskjet 3050 J610a printer that is listed as being capable on the list of HP AirPrint compatible printers and ePrint.

  However, I can't a Web Services tab at all when you access either the printer via its IP address or in the printer menu.

  I can't find an update of the firmware on the support of the printer section and have had no response from HP email warranty covered. Can someone help get this job, I can print wireless easily from the main engine, it was installed on, but can't see the printer and any apps ePrint AirPrint apps. When printing the configuration pages any printer ID or e-mail address is printed. As active poster on the section of Microsoft Web services.

  The HP support pages only to see Help information about the ePrint for Photosmart printers and Officejet, Laserjet, Designjet even though they support Deskjet.

  Any help is greatly appreciated as this is starting to annoy me now...

  Hi all

  The matrix management model has been updated! DJ 3050 has been replaced by the 3050 a DJ, plus additional models were added.

  One more thing... If you have the mobile device (iOS, Android, Symbian) and a DJ 3050, you have a printing solution. You can install the free application of HP ePrint home & Biz. This app will allow you to print to ~ 200 models of different HP printers, including the legacy networking and HP printers compatible ePrint.

• DeskJet 3050: Mfg mode

  I have a Deskjet 3050 mfg mode on the screen with none of the buttons being sensitive. Can anyone help?

  Hi @Schmugge,

• ePrint does not print the deskjet 3050 a spare

  I have deskjet 3050 a and unable to print attachments. text is ok but no pdf, excel, photos etc after research I know that the pdf files is not oversized.help please

  Hi there, if you try to print from a laptop to the printer you need not send attachments e-mail to the e-mail address of printers, you can simply print via regular HP printer software driver. DJ 3050 has installed on the laptop? If not, here is a link to where you can download Windows 8 driver for your system, simply select the correct option (32 or 64 bit) for your operating system http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5061092&

  If you want to be able to print from the laptop to the printer when the devices are not on the same network or if you do not want to install the product software, you have the option to install the software driver ePrint. This will allow you to print files from applications on your laptop (Adobe, MS Office, etc.) to your printer ePrint enabled even when they are on different networks. See this link for more information and a download link

  http://h20331.www2.HP.com/hpsub/us/en/eprint/overview.html

  Hope this information helps.

  Best

• New Deskjet 3050 J611 has no scan on iMac OS x 10.6.8 + utility HP do not open

  Hello - until I posted this I spend some time looking around and follows that some advice given here. It did not solve my problem. I bought a new Deskjet 3050 a yesterday.  Installation and wireless, the installation program has worked well.  I can print.  I can't scan - not with my iMac scan programs, nor with the HP scanning program.  I used the latest drivers I think. I first installed from the CD and then downloaded the drivers iMac OS X 10.6 from this site and re-installed.  I restarted iMac. Printer power switch.  I can't even scan.  Scanner programs don't seem to be able to establish a connection with the printer.  When I press on the analysis on the printer menu screen I get a msg saying there is no connected computer.

  More I can not open the HP program utility - "certain elements are missing," said the error message (even afetr two ire - install).

  All tips & tricks to fix this I would be grateful.  Thank you in advance.

  Joel

  Hello

  In reading your comments, you did not updated the latest driver by Apple Software Update, it could strongly affect the digitization of the Mac:

  Click the Apple icon, and then click software update.

  Make sure to install any update HP available, then check any change during the scan or at the launch of the HP utility.

  If the same question is not change, follow the steps below to completely remove and reinstall the software.

  Step 1: Uninstall the HP software by using the functionality of the scrubber:

  * Please note that the following steps will delete all HP software installed.
  
  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Second step: reset the printing system:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.
  
  Click on the Apple menu and then click on System Preferences.
  Select print & fax.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Step 3: Repair disk permissions:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Step 4: reinstall the latest version of the software below:

  http://FTP.HP.com/pub/softlib/software12/COL37730/Al-93167-1/DeskJet-3050A-J611-series_v12.7.0.dmg

  Step 5: install the latest update of HP:

  Click the Apple icon, and then click software update.

  Make sure to install any update HP available

  Please let me know of any changes,

  Shlomi

• DeskJet 3050 all-in-in-one J610a: Deskjet 3050 J610a cannot install scanner

  1. I tried to install the printer software for the Deskjet 3050 all-in-in-one J610a on a Dell E6530 with Microsoft Windows 7 Professional computer.

  2. but everything he tried guard fails with the message "installation Failed - the software for your printer cannot be installed."

  3. When you click on the ' details button it shows
  "Setup error. Install the Windows service could not be accessed. This can occur if you are running Windows in safe mode or if Windows install is not properly installed. Contact your support team.

  4. you will then have a solution. He then puts a document "default installation HP - 1601 MSI' on your desktop."
  a. He then opened Windows services to check if the Windows service install is running? Yes it's on my system.
  If I reinstall the same mistakes, as shown in the 2. and 3.

  5. I tried to replace the Windows Installer by running the commands ' msiexec.exe / uninstall ' and "msiexec.exe/regserver" (also tried in safe mode) for both 32-bit and 64-bit versions. Then by restarting. But making the same mistakes as in 2. and 3.

  6. I tried the installation CD and the last Installer downloaded DJ3050_J610_1315 - 1.exe from the Hewlett-Packard Web site. But making the same mistakes as in 2. and 3.

  7. I tried to run Microsoft Fix - it version 50809 who had another option to try. If you run it, it says 'creation creating a restore point, please wait... '. ». After a wait, he says "this Microsoft Fix - it impossible to deal with".

  I tried another more recent version of Microsoft Fix - it (downloaded from the Internet):
  MicrosoftFixit.ProgramInstallUninstall.Run.exe
  Running to check installation problems showed a list of programs to check installation problems.
  But it did not show the installation of HP DJ3050_J610_1315 - 1.exe file or similar in the list it could
  not be fixed.
  If you choose "not listed" then it shows "we have not identified any problems and that's why no fixes have been applied.

  8. If I run the files D3050x64.msi and D3050x32.msi from the CD (using Microsoft Windows install) it also fails with the error, as in 2. and 3.

  9. If I install ' HPSupportSolutionsFramework - 12.3.11.29.exe' it installs, but does nothing. It's probably not running and no instructions on how to do work.
  Update: it is actually a service running in the Microsoft Windows services such as 'HPSupportSolutionsFrameworkService '.
  The executable file is located in C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\HPSupportSolutionsFrameworkService.exe
  This service runs, but does not seem to be enabled.
  It adds a controller service background that adjusts automatically to
  run. Delay the start of this service is possible thanks to the function
  Manager. A scheduled task is added to the Windows Task Scheduler in order
  to start the program at various times demand (variable hours of work
  Depending on the version). The software is designed to connect to the
  Internet and adds exceptions to Windows Firewall to do this
  undisturbed.
  Scheduled task
  hpsupportsolutionsframeworkservice.exe is intended as a task with the class '{98FA553D-D703-4E16-9884-F328AC21770F}' (works on registration).
  Service
  hpsupportsolutionsframeworkservice.exe runs as a service named "HP Support Solutions Framework Service" (HPSupportSolutionsFrameworkService) "this service allows the detection of HP products and allows the identification of support solutions for detected products.".
  Boot file (user run once)
  hpdia.exe is loaded only once in the registry of user (HKCU) current as a name of boot file "HP download and install wizard" that charge as "C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\Modules\HPDIA.exe" / reboot.
  Windows Firewall enabled program
  hpdevicedetection3.exe is added as a firewall exception for "C:\Program Files (x 86) \Hewlett-Packard\HP.
  Check "Windows Task Manager" for example by running the command line
  Schtasks.exe
  or to run GUI
  Start taskschd.msc
  did not show anything about this service I can say.

  10. by using a troubleshooting earlier, I managed to install * only the printer *. But the * scan * can not be installed.

  See:
  https://community.Spiceworks.com/topic/443342-Windows-7-PC-keeps-trying-to-install-WSD-print-device?...

  1 - run
  rundll32 printui.dll/s/T2
  (this from the cmd.exe command line)
  2 - I couldn't find the 3050 in the list of default constructors (for example, "HP")
  3. - click on the button ' Add... »
  4 - click on the button "next".
  5 - automatically activated for example is 'x 64' '.
  6 - click the button "next".
  7 - click on the 'Have Disk' button... »
  8 - fill the printer Hewlett-Packard CD-ROM drive letter that
  should be in your computer
  For example
  D:
  9 - who will install the printer driver 3050 J610 and display it in the list
  10. - click on the 'Start' button of Microsoft Windows
  11. - Select from the list of "devices and printers".
  12 - if the printer 3050 J610 appears, right-click on it and select
  "Troubleshoot", if not right click, "Add a printer", make sure that
  your printer is on, and then select the printer 3050 and let
  It installs.
  13 - run the first fix to get the printer driver
  14 - run the second fix to make the printer the default printer
  15. - successful on Microsoft Windows 7 Professional execution

  (11 for example if I run the program "HP print and scan doctor program" to troubelshoot (= HPPSdr.exe) it is said that the ' HP445411 (HP Deskjet 3050 J610 series - network 192.168.1.49) - installed). It is said that the full product is not installed, then begins to download. But the executable that it downloads the same DJ3050_610_1315 - 1.exe as downloaded on HP website. So to make the same mistakes as in 2. and 3.

  12 Note: I basically never have no problem with installation on this computer. Only this printer HP 3050 J610a software does not always install.

  13 - tried to run pnutil.exe

  Because I managed to install the * printer driver (but not the * scanner driver) using the command
  rundll32 printui.dll/s/T2
  I was looking for a similar solution method for the scanner.
  So tried for example
  RUNDLL32. EXE, SETUPAPI. DLL, InstallHinfSection DefaultInstall 132 HPScanMiniDrv_DJ3050_J610. INF
  but which failed with the error "failed to install".
  Also tried to navigate this HPScanMiniDrv_DJ3050_J610 file in Windows Explorer. INF
  then right click on the file name and select 'install' in the list, but that showed a dialog box
  "Install error - the INF file selected does not support this method of installation".
  Then I found this link:
  https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/60f4b917-93c9-400A-B91A-15375a8793bf/i...
  who suggested using the Microsoft «pnputil.exe» program
  After inserting the installation CD original HP located in D:
  and it points to the file ' HPScanMiniDrv_DJ3050_J610. INF'
  which is present by default on this HP CD,
  and by running this command:
  --- cut here: begin --------------------------------------------------
  d:\ Tuesday, May 30, 16 16:32:33 > pnputil
  Microsoft PnP utility
  Use:
  ------
  PnPUtil.exe [f |-i] [-? |-| d |-e]
  Examples:
  PnPUtil.exe - an a:\usbcam\USBCAM. INF-> Add package specified by INF USBCAM.INF.
  PnPUtil.exe - a:\drivers\*.inf-> c add all packages in c:\drivers\
  PnPUtil.exe-i - one a:\usbcam\USBCAM. INF-> Add and install the driver package
  PnPUtil.exe EI-> list all packages 3rd party
  PnPUtil.exe d oem0.inf-> delete package oem0.inf
  PnPUtil.exe f d oem0.inf-> Force delete package oem0.inf
  PnPUtil.exe -? -> This form to use

  So I ran this command:

  d:\ Tuesday, May 30, 16 16:33:39 > pnputil-i - one HPScanMiniDrv_DJ3050_J610. INF
  Microsoft PnP utility
  Processing inf: HPScanMiniDrv_DJ3050_J610. INF
  The driver installed on a device on the system.
  Successfully added driver package.
  Published name: oem115.inf
  Total attempted: 1
  Number was imported successfully: 1
  --- cut here: end ----------------------------------------------------

  The disk check showed the file "oem115.inf" was indeed installed in the directory "c:\windows\inf\".

  During troubleshooting earlier, I already copied the file
  HPScanMiniDrv_DJ3050_J610.dll
  Located on the HP installation CD
  in the folder
  c:\Windows\System32\
  and also to
  C:\Windows\SysWOW64\

  I then run the steps here:
  http://Windows.Microsoft.com/en-us/Windows/working-with-Scanner-Camera-Installation-Wizard#1TC=Windo...
  Before using the wizard, connect your scanner or camera and turn it on.
  If Windows detects the device and installs the correct driver, you're all set. There is no need to run the wizard.
  To start the scanner and Camera Installation Wizard
  Open the wizard scanners and cameras by clicking on the
  Start button, then click Control Panel.
  In the search box, type scanners and cameras and then click Scanners and cameras.
  Leave administrator needed if you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.
  I can't find that on Microsoft Windows 7, but clicked on the button 'add a device '.
  This shows the scanners currently present on the system.
  If it is present, double-click it.
  Microsoft Windows will be found the driver for you.

  But he could not find a scanner or install the scanner driver.
  So not solved.

  14 - Note: If a successful installation: for example, you should be able to see the
  device scanner in 'Start' > 'Control panel' > 'System' > ' Imaging
  devices

  15 - I then tried to run Windows fax and scan program
  (you need to install first)
  WFS.exe
  But not find scanner.

  16 - I then connected the printer with a USB cable to the computer.
  He began the installation of the driver and reported a successful installation
  and analysis successfully.
  I guess that somewhere in the previous steps, that the pilots were in the right
  place.
  But it works with my attached USB cable.
  If I try to remove the USB cable it says
  "Cannot find the scanner." No scanner or other source TWAIN found on the system'

  17. I also tried to run the Installation Wizard of HP printer
  http://support.HP.com/in-en/document/c03521864
  but that no longer works.
  It has detected now:

  "HP Deskjet 3050 J 610 series" - network
  But for the network one he noted a problem:
  "The wizard has reported a problem with the software driver for the selected printer."

  "HP Deskjet 3050 J 610 series" - USB
  For this version of the USB what he reported:
  "Basic features drivers seem to be installed for the selected printer." We recommend you to install the complete HP software to get all the features of the printer"

  If you click 'next' again it downloads the usual HP software that you
  can not install. With the same mistakes as in step 2. and 3. here.
  So no solution.

  18 - of the current workarounds:

  a. - possibly try some of the steps above which may take for example, the printer and scanner driver to the right place.
  Then connect a USB, Microsoft Windows should detect the printer / scanner
  and install the drivers.

  But printing should work wireless.

  Disadvantage:

  To analyze you will need to connect using a USB cable and the scanning doesn't work so not wireless.

  b. - buy or use Hamrick VueScan. It installs its own drivers to scan.
  But it is not free software. But it works by scanning wireless also.

  Question: If you have the best solution or workaround solutions, for example to activate
  scan wireless too, please let me know.

  Hello @knudvaneeden,

  It is a great place to get help! I read your post and see that you receive an error when trying to install the software to print, but you have finally managed to install the printer by a USB connection. When you use the printer as a wireless connection, you are not able to scan. Please provide all the detailed steps that you have already tried. I want to help you solve this problem.

  Make sure that you disable the Antivirus software and scan in real time if your software Antivirus has this feature. It can affect the entire software installer.

  Follow this document to see if you can install all drivers: HP monofunctional and printers multifunctional - installing software Fatal Error "fatal error 1601' (MSI error 1601) displays for HP. »

  Try the scan of the painting to see if you have the same problem.

  Run the Print and the doctor Scan and let me know the error codes or if everything is checked. You can attach a screenshot.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  You can click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• Install HP Deskjet 3050 a. computer indicates Microsoft XPS Document Priter installed. Then whil

  After you have installed and try to print, the computer shows printer not found.  When looking at, only Microsoft XPS Document printer has been installed.

  I'm glad that you were able to understand.

  Don't forget your Deskjet 3050 a printer can connect to a network without wire using either WPS (Wi - Fi Protected Setup) or to convert a USB port, wireless installation.  See Page 31-35 of your user manual.

  http://h10032.www1.HP.com/CTG/manual/c02853536.PDF

  1. change a USB connection to a wireless network connection.

  • Install the printer using the USB cable.
  • Switch from a USB connection to a wireless network

  1. from the computer start menu, select all programs or programs, and select HP.

  2. Select the HP Deskjet 3050 a J611 series
  3. Select Printer Setup and software selection.
  4. Select convert a connected USB printer wireless. Follow the instructions on the screen.

  2 requires WPS (Wifi Protected Setup) router WPS.

  • The push-button (PBC) method

  1. press the Wi - Fi Protected Setup (WPS) button on your router.
  2 hold down the button on the printer wireless until the wireless light blinks. Press and hold for 3 seconds to start the WPS button.
  NOTE: the product starts a timer for about two minutes when a wireless connection is established.

  • Method of Menu Settings wireless

  1. press the button on the printer to display the wireless wireless. If the printer is printing, in error, or to perform a State
  a critical task, wait for the task has been completed or the error cleared before you press the wireless button.
  2. Select settings in the screen of the printer wireless.
  3. select Wi - Fi Protected Setup in the screen of the printer.
  4. If you have a Wi - Fi Protected Setup (WPS) router with a WPS button, select the button, and then follow the instructions on the screen. If your router does not have a button or you are not sure if your router has a push button, select PIN and then follow the instructions on the screen.
  NOTE: the product starts a timer for about two minutes during which must be pressed the corresponding key on the network device or router PIN needs to be entered on the router configuration page.

• Script error message prevents printing from Explorer or send an e-mail using HP deskjet 3050 a 3611 series

  A series of 3611 using HP Deskjet 3050 has (last new material before problem) on Windows 7 64-bit and Windows Internet Explorer 9.1.10 - when I try to print I get no numbered error reading message "an error has occurred in the script on this page" it goes then with some details that vary with the material, I am trying to print, and then I can't print - I did some Internet research and could not get (or understand) suggested methods of repair other than comments - which suggest that HP is a source of this type of problem - or the last loaded device - I rebooted HP a couple of times with no benefit - the HP print well from a source other than the Windows Explorer or G-mail - I use a workaround to copy my wording of the text and print it easily - suggestions?

  You will just need to clear your cache and you should be able to print again from the Explorer and e-mail. Here's a link below that will help you on how to clear the cache.

  http://www.WikiHow.com/clear-your-browser%27s-cache#Internet_Explorer_9

  Hope this helps, thanks.

• HP deskjet 3050 j610: when I try to scan from my printer it will not connect

  When I try to scan from my printer I get a message "Cannot find HP deskjet 3050 j610. But I can print from it and get data as ink tank printer. It started abruptly today. It worked OK until a few days ago.  The printer is connected by a USB cable. I tried the driver update and 'repair' menus via HP scanning problems without success.  If I press scan on the printer button it says "scan error. try to scan from computer', but that's what I usually do using the calculation icon in the menu START.

  I solved the problem. The basic steps were (1) using the HP links to update my driver printer and research to find errors in the scanning program. (2) restart my computer and printer. After the first part, I didn't see any listed results. Normally I would have restarted the printer and the computer, but is afraid of losing my sites and the investigation, so I kept looking for the various comments.  I found a reference to this site in one of the post near mine for a #7520 device but cannot return immediately to give the author of the post. I think I sent him a response.

  http://support.hp.com/us-en/document/c00040499.

  This site gives lots of tips for different situations and devices. I followed the advice that it applied to my computer and printer who ended with step 2 (I use a USB connection) and the scanner was working again.

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.