DeskJet 3050 all-in-in-one J610a: Deskjet 3050 J610a cannot install scanner

1. I tried to install the printer software for the Deskjet 3050 all-in-in-one J610a on a Dell E6530 with Microsoft Windows 7 Professional computer.

2. but everything he tried guard fails with the message "installation Failed - the software for your printer cannot be installed."

3. When you click on the ' details button it shows
"Setup error. Install the Windows service could not be accessed. This can occur if you are running Windows in safe mode or if Windows install is not properly installed. Contact your support team.

4. you will then have a solution. He then puts a document "default installation HP - 1601 MSI' on your desktop."
a. He then opened Windows services to check if the Windows service install is running? Yes it's on my system.
If I reinstall the same mistakes, as shown in the 2. and 3.

5. I tried to replace the Windows Installer by running the commands ' msiexec.exe / uninstall ' and "msiexec.exe/regserver" (also tried in safe mode) for both 32-bit and 64-bit versions. Then by restarting. But making the same mistakes as in 2. and 3.

6. I tried the installation CD and the last Installer downloaded DJ3050_J610_1315 - 1.exe from the Hewlett-Packard Web site. But making the same mistakes as in 2. and 3.

7. I tried to run Microsoft Fix - it version 50809 who had another option to try. If you run it, it says 'creation creating a restore point, please wait... '. ». After a wait, he says "this Microsoft Fix - it impossible to deal with".

I tried another more recent version of Microsoft Fix - it (downloaded from the Internet):
MicrosoftFixit.ProgramInstallUninstall.Run.exe
Running to check installation problems showed a list of programs to check installation problems.
But it did not show the installation of HP DJ3050_J610_1315 - 1.exe file or similar in the list it could
not be fixed.
If you choose "not listed" then it shows "we have not identified any problems and that's why no fixes have been applied.

8. If I run the files D3050x64.msi and D3050x32.msi from the CD (using Microsoft Windows install) it also fails with the error, as in 2. and 3.

9. If I install ' HPSupportSolutionsFramework - 12.3.11.29.exe' it installs, but does nothing. It's probably not running and no instructions on how to do work.
Update: it is actually a service running in the Microsoft Windows services such as 'HPSupportSolutionsFrameworkService '.
The executable file is located in C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\HPSupportSolutionsFrameworkService.exe
This service runs, but does not seem to be enabled.
It adds a controller service background that adjusts automatically to
run. Delay the start of this service is possible thanks to the function
Manager. A scheduled task is added to the Windows Task Scheduler in order
to start the program at various times demand (variable hours of work
Depending on the version). The software is designed to connect to the
Internet and adds exceptions to Windows Firewall to do this
undisturbed.
Scheduled task
hpsupportsolutionsframeworkservice.exe is intended as a task with the class '{98FA553D-D703-4E16-9884-F328AC21770F}' (works on registration).
Service
hpsupportsolutionsframeworkservice.exe runs as a service named "HP Support Solutions Framework Service" (HPSupportSolutionsFrameworkService) "this service allows the detection of HP products and allows the identification of support solutions for detected products.".
Boot file (user run once)
hpdia.exe is loaded only once in the registry of user (HKCU) current as a name of boot file "HP download and install wizard" that charge as "C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\Modules\HPDIA.exe" / reboot.
Windows Firewall enabled program
hpdevicedetection3.exe is added as a firewall exception for "C:\Program Files (x 86) \Hewlett-Packard\HP.
Check "Windows Task Manager" for example by running the command line
Schtasks.exe
or to run GUI
Start taskschd.msc
did not show anything about this service I can say.

10. by using a troubleshooting earlier, I managed to install * only the printer *. But the * scan * can not be installed.

See:
https://community.Spiceworks.com/topic/443342-Windows-7-PC-keeps-trying-to-install-WSD-print-device?...

1 - run
rundll32 printui.dll/s/T2
(this from the cmd.exe command line)
2 - I couldn't find the 3050 in the list of default constructors (for example, "HP")
3. - click on the button ' Add... »
4 - click on the button "next".
5 - automatically activated for example is 'x 64' '.
6 - click the button "next".
7 - click on the 'Have Disk' button... »
8 - fill the printer Hewlett-Packard CD-ROM drive letter that
should be in your computer
For example
D:
9 - who will install the printer driver 3050 J610 and display it in the list
10. - click on the 'Start' button of Microsoft Windows
11. - Select from the list of "devices and printers".
12 - if the printer 3050 J610 appears, right-click on it and select
"Troubleshoot", if not right click, "Add a printer", make sure that
your printer is on, and then select the printer 3050 and let
It installs.
13 - run the first fix to get the printer driver
14 - run the second fix to make the printer the default printer
15. - successful on Microsoft Windows 7 Professional execution

(11 for example if I run the program "HP print and scan doctor program" to troubelshoot (= HPPSdr.exe) it is said that the ' HP445411 (HP Deskjet 3050 J610 series - network 192.168.1.49) - installed). It is said that the full product is not installed, then begins to download. But the executable that it downloads the same DJ3050_610_1315 - 1.exe as downloaded on HP website. So to make the same mistakes as in 2. and 3.

12 Note: I basically never have no problem with installation on this computer. Only this printer HP 3050 J610a software does not always install.

13 - tried to run pnutil.exe

Because I managed to install the * printer driver (but not the * scanner driver) using the command
rundll32 printui.dll/s/T2
I was looking for a similar solution method for the scanner.
So tried for example
RUNDLL32. EXE, SETUPAPI. DLL, InstallHinfSection DefaultInstall 132 HPScanMiniDrv_DJ3050_J610. INF
but which failed with the error "failed to install".
Also tried to navigate this HPScanMiniDrv_DJ3050_J610 file in Windows Explorer. INF
then right click on the file name and select 'install' in the list, but that showed a dialog box
"Install error - the INF file selected does not support this method of installation".
Then I found this link:
https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/60f4b917-93c9-400A-B91A-15375a8793bf/i...
who suggested using the Microsoft «pnputil.exe» program
After inserting the installation CD original HP located in D:
and it points to the file ' HPScanMiniDrv_DJ3050_J610. INF'
which is present by default on this HP CD,
and by running this command:
--- cut here: begin --------------------------------------------------
d:\ Tuesday, May 30, 16 16:32:33 > pnputil
Microsoft PnP utility
Use:
------
PnPUtil.exe [f |-i] [-? |-| d |-e]
Examples:
PnPUtil.exe - an a:\usbcam\USBCAM. INF-> Add package specified by INF USBCAM.INF.
PnPUtil.exe - a:\drivers\*.inf-> c add all packages in c:\drivers\
PnPUtil.exe-i - one a:\usbcam\USBCAM. INF-> Add and install the driver package
PnPUtil.exe EI-> list all packages 3rd party
PnPUtil.exe d oem0.inf-> delete package oem0.inf
PnPUtil.exe f d oem0.inf-> Force delete package oem0.inf
PnPUtil.exe -? -> This form to use

So I ran this command:

d:\ Tuesday, May 30, 16 16:33:39 > pnputil-i - one HPScanMiniDrv_DJ3050_J610. INF
Microsoft PnP utility
Processing inf: HPScanMiniDrv_DJ3050_J610. INF
The driver installed on a device on the system.
Successfully added driver package.
Published name: oem115.inf
Total attempted: 1
Number was imported successfully: 1
--- cut here: end ----------------------------------------------------

The disk check showed the file "oem115.inf" was indeed installed in the directory "c:\windows\inf\".

During troubleshooting earlier, I already copied the file
HPScanMiniDrv_DJ3050_J610.dll
Located on the HP installation CD
in the folder
c:\Windows\System32\
and also to
C:\Windows\SysWOW64\

I then run the steps here:
http://Windows.Microsoft.com/en-us/Windows/working-with-Scanner-Camera-Installation-Wizard#1TC=Windo...
Before using the wizard, connect your scanner or camera and turn it on.
If Windows detects the device and installs the correct driver, you're all set. There is no need to run the wizard.
To start the scanner and Camera Installation Wizard
Open the wizard scanners and cameras by clicking on the
Start button, then click Control Panel.
In the search box, type scanners and cameras and then click Scanners and cameras.
Leave administrator needed if you are prompted for an administrator password or a confirmation,
type the password or provide confirmation.
I can't find that on Microsoft Windows 7, but clicked on the button 'add a device '.
This shows the scanners currently present on the system.
If it is present, double-click it.
Microsoft Windows will be found the driver for you.

But he could not find a scanner or install the scanner driver.
So not solved.

14 - Note: If a successful installation: for example, you should be able to see the
device scanner in 'Start' > 'Control panel' > 'System' > ' Imaging
devices

15 - I then tried to run Windows fax and scan program
(you need to install first)
WFS.exe
But not find scanner.

16 - I then connected the printer with a USB cable to the computer.
He began the installation of the driver and reported a successful installation
and analysis successfully.
I guess that somewhere in the previous steps, that the pilots were in the right
place.
But it works with my attached USB cable.
If I try to remove the USB cable it says
"Cannot find the scanner." No scanner or other source TWAIN found on the system'

17. I also tried to run the Installation Wizard of HP printer
http://support.HP.com/in-en/document/c03521864
but that no longer works.
It has detected now:

"HP Deskjet 3050 J 610 series" - network
But for the network one he noted a problem:
"The wizard has reported a problem with the software driver for the selected printer."

"HP Deskjet 3050 J 610 series" - USB
For this version of the USB what he reported:
"Basic features drivers seem to be installed for the selected printer." We recommend you to install the complete HP software to get all the features of the printer"

If you click 'next' again it downloads the usual HP software that you
can not install. With the same mistakes as in step 2. and 3. here.
So no solution.

18 - of the current workarounds:

a. - possibly try some of the steps above which may take for example, the printer and scanner driver to the right place.
Then connect a USB, Microsoft Windows should detect the printer / scanner
and install the drivers.

But printing should work wireless.

Disadvantage:

To analyze you will need to connect using a USB cable and the scanning doesn't work so not wireless.

b. - buy or use Hamrick VueScan. It installs its own drivers to scan.
But it is not free software. But it works by scanning wireless also.

Question: If you have the best solution or workaround solutions, for example to activate
scan wireless too, please let me know.

Hello @knudvaneeden,

It is a great place to get help! I read your post and see that you receive an error when trying to install the software to print, but you have finally managed to install the printer by a USB connection. When you use the printer as a wireless connection, you are not able to scan. Please provide all the detailed steps that you have already tried. I want to help you solve this problem.

Make sure that you disable the Antivirus software and scan in real time if your software Antivirus has this feature. It can affect the entire software installer.

Follow this document to see if you can install all drivers: HP monofunctional and printers multifunctional - installing software Fatal Error "fatal error 1601' (MSI error 1601) displays for HP. »

Try the scan of the painting to see if you have the same problem.

Run the Print and the doctor Scan and let me know the error codes or if everything is checked. You can attach a screenshot.

Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

You can click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

Tags: HP Printers

Similar Questions

  • My printer hp deskjet 3650 printer cannot install successfully. Printer driver cannot be found.

    My printer hp deskjet 3650 printer cannot install successfully. Troubleshooting result indicate that the driver printer cannot be found.

    Hello

    1. who is the operating system installed on your system?

    2. did you of recent changes to the system before the show?

    3. What are the troubleshooting steps you have done?

    4. do you believe that no matter what exclamation point in Device Manager?

    5. How do you install the printer?

    6. are you using the CD or downloaded the printer drivers?

    7. What is the full error message?

    Method 1: Uninstall the drivers and install the drivers.

    Note: Follow the below link to download drivers and also to choose the version of the operating system installed on your system.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=304535

    Find and install printer drivers in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    Install a printer

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    In addition, check out the link below and check if it helps.

    http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=34773&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=304535

    http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/471d1c5f-0939-4601-a6b2-146e147c90c8/

    Let us know if it helps.

  • HP DESKJET 3050 all-in-one j610a

    Is the HP DESKJET 3050 all-in-in-one J610a active AirPrint so I can print from my iPad 2?

    Hello

    As you can find it in the list below, your printer supports Airprint:

    http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/eprint-and-print-app-supported-printers/TD-p/351574

    You must make sure that the time you iPad and the printer are connected to the same network.

    In all cases you can't find your printer by clicking on the icon print from your iPad, make sure to turn your iPad and off the printer, unplug your router for 30 seconds and then turn them on.

  • HP Deskjet F2480 fails to install

    Hello

    I tried to install Windows 7 (64-bit) version of the driver for the printer HP deskjet F2480 on my wife's cell phone. I tried this on my PC and installed properly and no problems at all.

    However, on my wife's machine, is the version of the download (driver only or 'full software') fails to make it beyond the stage of "Extraction XX %" of the installer. Once it reaches 100%, the program fails silently (I checked the Task Manager and the process seems to just die by itself after a few seconds).

    I already tried the following:

    * Restart in safe mode to disable the antivirus to my wife (free antivirus Avira)

    * Downloaded and run the installation wizard HP (which is just impossible to change anything and went back to the first menu at the end).

    * A tried to run the program as administrator.

    * Tried to launch the program under Windows XP compatibility.

    Who have failed to get beyond the mining phase.

    My wifes laptop is an Acer "Aspire One 722"

    1. try to install first the next update:

    2. when the installation window appears, click the OK button:

    3. restart the computer.

    4. try again to install the software for the Deskjer F2480

    .... And now, you will be able to install your printer to the Acer laptop.

    * Click the stars KUDOS to say thanks

    * Click the accepted Solution if the answer to the question.

  • HP Deskjet 6980 will not install via USB or network

    I've recently updated my PC with a new mother/case/CPU card, etc. and trying to set up my Deskjet 6980 he tries to install two separate drivers.  One is named HP Deskjet 6980 DOT4USB and the other just HP Deskjet 6980.  Dot4USB installation is complete, however the drivers for "Hp deskjet 6980" fail.  The printer indicates only in my "devices and printers" as "HP Deskjet 6980" with an icon of troubleshooting.  whenever I run troubleshoot it tells me I need to install the drivers.  He's trying to install the drivers through troubleshooting or Windows Update every time, she fails.

    I tried to uninstall all instances of the name Deskjet from my computer, turn off the printer, restarted my computer and then turn on the printer/plug again for the same results.

    I plugged my printer on the network and while my laptop has no connection/printing problem, when I try to add it as a network printer in "Devices and printers" it gives me an error message saying "unable to install.  "Double check the name of the printer and make sure that the printer is connected to the network.  I tried both options "Use the driver is installed" and "replace the driver" and both give me the cannot install message.

    Some tips on what might be the problem or how to fix?  I downloaded each item including HP Deskjet 6980 on site without success.

    Windows 7.  As mentioned, the printer works perfectly when connected to my laptop via USB or wireless connection, my PC just does not want to connect via either.

    HP Print & Scan doctor tells me that I must not get the installer of your website, however there is no installer for Deskjet 6980.  The "Printer Install Wizard" & "Hardware diagnostic utility" mean that the printer is not supported by the software.   When I plug in the printer it goes through the process of installing driver as follows:

    I tried the update through troubleshooting, Windows Update and even to get the file on the Microsoft Web site (pg no longer exists). I thought about trying to find the driver on my laptop, but I'm not sure the actual name of the file what.

    * EDIT *.

    Looks like I solved the problem myself.  I don't know why, but my printer has appeared only at random in my Uniblue DriverScanner program (it would not be displayed when I looked before).  I was able to download & install from program Driverscanner and my printer works perfectly.  A strange question, but at least it was an easy fix.

    Thank you.

  • Cannot install drivers for Deskjet 3650 in Windows 7 XP

    I have a HP Deskjet 3650 which is connected through the USB port on my primary computer running Windows 7.  I can print without problem, I have problems sharing this printer with 2 other computers running Windows XP.  I downloaded the drivers for XP and excerpts on the Windows 7 computer.

    On the properties of the printer HP Deskjet 3600 series, I clicked on the sharing tab.

    Share this printer and rendering of printing on client computers are both checked.

    When I click on additional drivers, only X 64 is checked and said yes less installed.

    The two other options (Itanium and x 86) are both unchecked and say no less installed.

    I tried x 86 control and clicking on OK.  Then I am asked to install print drivers and browse to where are printer drivers.  I navigate to the 3600, enu, pilots, win2k_xp folder and see hpf3600k.inf when I click Open, then select OK, I get a selected printer driver not found error that indicates the specified location does not contain the driver for hp deskjet 3600 series (BOBO) on the architecture of processor required.

    On one of the XP machines, I installed the printer software and am not able to print if I physically plug the printer on it.

    On another XP machine, I have installed the printer software, but I download and extract the drivers.  When I click on the Add Printer Wizard and select the printer on the network, it tells me that I'm about to connect to a printer on the computer Windows 7 and says that it will automatically install a print on my machine driver.  I click Yes to allow him to continue and he told me that the server for the hp deskjet 3600 printer doesn't have the installed printer driver and I can click OK to search for the correct driver.  I click OK and navigate to the folder I extracted the drivers to and see that hpf3600k.inf is located in the folder and click OK and I get a window of driver error install that says that Windows cannot locate a suitable printer driver.  To help locate and install a suitable driver, contact your administrator.

    So, it seems to me that the driver that I downloaded on the site of hp for Windows XP is not the correct driver, am I wrong here?

    How can I get this printer to print on all 3 computers work without having to move from one to the other.  The printer must be physically connected to the Windows 7 computer, as the other 2 are in children's rooms.

    Try the following: on the machine XP go to the printers and Faxes folder, add a local printer, printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the shared computer and printer), OK, and then click disk and point to the directory where you unzipped the driver XP.

    On the XP machine, you have already installed the driver do the following: go to the printers and Faxes folder, right click on the Deskjet 3650, select Properties, Ports, the port, Local port Add, new Port, \\Computername\Printername (use the name of the shared computer and printer), OK.

  • It might make me totally distracted, but in the password protocol, it seems all sites want one and then somehow I've now changed my passwords?

    Hello

    It might make me totally distracted, but in the password protocol, it seems all sites want one and then somehow I've now changed my passwords? IE: Google, Microsoft...

    Some people say that I need only a pswd for all sites?

    Some say all change every month... you, the experts say?

    Thank you

    Hello

    One of the worst things you can do with passwords is to have the same password for everything. For example, someone like a hacker finds your password by e-mail. You can use the e-mail address as username for several things, such as the online stores, financial sites, etc.. Once they know this address combination and e-mail password works on a single site, hackers can try on many popular sites. You are then not only your email hacked, but a lot of things.

    There are more tips here:

    http://www.microsoft.com/en-GB/security/online-privacy/passwords-create.aspx .

  • How to properly temporarily disable all channels except one in the multichannel PID control loop?

    Hi all

    Help me please to solve the problem. How to correctly temporarily disable/enable all channels except one in the multichannel PID control loop?

    Thanks in advance,

    Oleg

    Hi Oleg,

    the entry "Car?" of the AdvancedPID is a table – as well as MS and pv entries.

    So what's the problem say - / allowing for a control (aka of entry) instead of all loop?

  • Cannot install HP Photosmart C6380 all-in-One Printer

    Original title: HP Photosmart C6380 all-in-One Printer, it will not be installed in the computer disk or web site

    None of the things I have tried will allow programs to download and when I go to detect does not detect the printer at all so anything that I want to use this for is not good and I about ready to kill hp all to gether

    Hello

    1. who is the operating system installed on the computer?
    2. have you checked if the HP printer is compatible with the version of the operating system that you are using?
    3. do you get an error message when you try to install the driver?
    4. what all troubleshooting have you tried?

    If you use Windows 7, follow these methods.

    Method 1: You can also run the fixit of material.

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2: in the Windows printer problems

    For more information, see these articles:

    Install a printer
     
    Find and install printer drivers

    Please provide us with more information on question help you also.

  • Cannot install the all-in-one printer

    Download HP officejet 4500 G510-m from HP website. When I click on install, I get the HP message: the system cannot find the specified file. I've never had this installation problem.  I could always install. I believe the download is corrupted

    System Windows 8.1

    I uninstalled printer because had message printer disconneted.

    Check the devices & printers in the control panel

    Model photosmart all-in-one printer scanner copier HPDD4BE7 (HP office jet 4500 G510g-m) is installed on my computer. Not my model according to the image

    I don't have photosmart all-in-one printer. I have printer HP office jet 4500 G510g-m all-in-one

    According to HP print and scan the doctor 4.3

    The following products are visible from your computer

    HPDD4BE7 (HP office jet 4500 G510g-m)

    connection: network

    software requirement: installed

    I tried to print but prints blank pages

    I wonder if the cause of the problem when clicking on install is that I have already installed (HP office jet 4500 G510g-m) HPDD4BE7 so get the HP message: the system cannot find the specified file

    I have good HP office jet 4500 G510g-m printer installed?

     

    Troubleshooting report

    Problem with the yellow triangle detected printer with an exclamation mark inside

    There could be problems with HPDD4BE7 (HP Officejet 4500 G510g-m). Windows will take additional steps to continue troubleshooting.

     

    Solution: Rename the extensions of .dat files in the Windows folder and reinstall the software

    First step: rename the .dat files in the Windows folder

    Search box, type % windir %

    No adjustment results found for your search %windir%\System32

    The first step is not a solution

    Second step: download and install the software from the HP site

    Not a solution: when click on get installation message: the system cannot find the specified file.

    You don't need to the second step if you HP print and scan the doctor 4.3 installed or HP printer installation for windows Wizard. It detects the office jet HP 4500 G510g-m software is not installed, select the printer and click on install to download the software.

    question: when when the get message install HP: the system cannot find the file logle even when Mcafee firewall has been disabled or uninstalled.

    I have no problem, download and install any software but

    HPDD4BE7 (HP Officejet 4500 G510g-m)

    I did the test HP officejet 4500

    Green connection box

    device status green checkmark

    I cannot install the software (HP Officejet 4500 G510g-m) HPDD4BE7 HP printer install wizard for Windows or printing HP and SCan doctor 4.3

     

     

    Ok

    Please try the following steps:

    1. First of all make sure that McAfee of real-time scanning is disabled until you restart the PC.
    2. Open the dialog box run by clicking on the Windows key and the R key on your keyboard.
    3. Type %windir% , and then click OK.
    4. Type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
    5. Type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
    6. By following steps 2 to launch the run dialogue box, type MSIEXEC /Unregister. in the Run dialog box and click OK.
    7. By following steps 2 to launch the Run dialog box, type MSIEXEC /REGSERVER in the Run dialog box and click OK.
    8. Launch the dialog box run by following steps 2, type % temp % and click OK.
    9. Open the last HP installation folder, that starts with the characters 7z (you can sort the view by date humidification) and click on the file Setup.exe .

    Please follow these steps in the exact order, is there a difference during the installation of the software?

  • I managed to remove the icon to display all open windows one behind the other.

    I managed to remove the icon to display all open windows one behind the other.  Where can I find it now?

    Also, my laptop keeps getting an error when I try to restore to an earlier date and told me that it is impossible to complete.

    Hello

    Which, in my view, that you have a problem with, it's called windows Flip 3D!

    Try this first and see how you go...

    1. To turn on the Quick Launch bar, follow these steps:
    2. Right-click anywhere on an empty spot on the taskbar.
    3. Choose toolbars from the menu that appears.
    4. Select Quick Launch in the following menu so that it is checked.

    You should then be able to click the icon to switch between Windows now and use the 3d Flip...

    Or

    . Right click on the Quick Launch toolbar, but not on an icon
    2. Select the folder from the context menu. It will take you to the Quick Launch folder that should live:

    C:\Users\username\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

    3. right click in an empty area of this folder
    4. Select new, then shortcut from the context menu
    5. for the location text box, enter the following text:

    C:\Windows\System32\rundll32.exe dwmapi #105

    6. click on the next button
    7. appoint. (Flip3D, for example)
    8. click on finish

    The shortcut will now be in your Quick Launch toolbar.

    Concerning

    GT4U

  • Cannot install my Lexmark 8300 printer all in one

    Cannot install my Lexmark 8300 printer all in one

    http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US%20&segment=download

    Read the above, after typing in a Lexmark 8300 printer:

    Please start typing your model number to find your product.

    Please try again. There was no product found for this model:

    Printer Lexmark 8300

    Contact Lexmark

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot install HP Deskjet Ink Advantage 2545

    Cannot install HP Deskjet Ink Advantage 2545 as default printer, error message: 0 X 00000709

    Original title: default printer

    Hello I am,.

    From the description provided, I understand that Windows cannot configure the printing device.

    Before you continue, see the Microsoft Help link below and check if it helps.

    Solve printer problems

    Now, refer to the below the suggested methods and check if this may help solve the problem.

    Method 1: change the type of service to automatic.

    a. press on Windows + R keys.

    b. type services.msc in the box and press on enter.

    c. now locate called , print spooler services make sure that services are started and set its automatic.

    d. to set the service to Automatic, right-click the service and click on automatic.

    e. click apply , and then click on ok.

    Method 2

    Try to update the drivers manually. To do this, please follow the steps below:

    1. open devices and printers, click the Startbutton, and then click the start menu, click devices and printers.

    2 right-click the printer that you want to update, and then click printer properties.

    3. click on the Advanced tab.

    4. click on new driverand then follow the instructions in the Wizard add printer driver.

    For more information, please see the link below:
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    In addition, you can also consult the links below on how to install a printer, install the printer locally on a computer at home.

    Install a printer

    Hope the above information is helpful. If you would like more information, do not hesitate to write to us and we would be happy to help you.

    Thank you.

  • BlackBerry Z10 how bulk delete email - not 5 or 10 by selecting all the emails one by one, but 'delete before... '. "or similar

    Hi Cimmunaute

    as you often work and as you say you have a lot of emails: how to remove the masses as delete block? on my old blackberry (except z10 newstes) I had the option "remove all front of (...)". Date"in the context menu, and could remove 1500 emails with a tap. do you know how to do this now? There is not such a function, we have to type and mark each email, even if there are 2000! crazy!

    Thank you very much!!

    BB: Please urgently add functionality...! I have an imap account with approximately 200 emails a day that are just a copy of the mail of the company and need to delete hundreds every day. I can not press on and select all mails only one and then delete.

    Go in the hub, select e-mail account, just under the blue email account, click and hold the date below it, cursor appears on the right, click Recycle Bin (before deletion).

  • DeskJet 2515 HOW TO install with windows 8

    DeskJet 2515 HOW TO install with windows 8

    Hello

    Download and install the software below, remember to keep the cable plug USB disconnected until installation invites you to the to:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109467-1&cc=us&DLC=en&LC=en&OS=4131&product=5157453&sw_lang=

    Shlomi

Maybe you are looking for