HP deskjet 4580,

Similar Questions

• Defects of driver Deskjet 4580

  I've been a happy owner/user of a computer HP Compaq dx2400 has recently been upgraded to the Windows 7 Basic...

  Before that, I was using a printer all-in-one Deskjet 4580 (on Windows XP SP3) without problem...

  However, much to my dismay, I have continual problems with my newly improved pc refuses to recognize the files downloaded printer causing a knock - effect with my Windows Explorer...

  After much research and constantly remove and reinstall the direct drivers of support HP.com and printer files, I can't stop the printer drivers crashing, which of course then keep interfering with Windows Explorer...

  I discovered with the support of other friends, that I had to manually uninstall the faulty printer using my device manager drivers and then re-install the printer files (once again!)

  This seemed to work at first, but now the driver files do not have once again, and the sevice Manager shows my printer as being a Deskjet 4500 AND IEEE 1284.4 compatible printer?

  What is my problem?    Is it because my printer is circa 2008 and its too old? Or is there another problem that I am suffering with?

  I need help people!   :-)

  Hello.

  I understand that your USB drivers do not work properly. We must resolve this problem before you continue troubleshooting I have a HP document that you can follow to your best ability: Troubleshooting connections USB.

  Please inform me of your steps or if it solves your problem.

  Ashley

• the copy of hp deskjet f4580

  When you print a page that the print is so small that you can hardly read it. How to increase the size of the print.  (deleted content) it is hp deskjet 4580 copyer.

  Hi @aubrey2,

  I see your F4580 is the production of small print and you want to increase the font size.

  What browser are you printing from?

  If you use Internet Explorer, you can use this document; The text is small when printing from Internet Explorer. However, if you use AOL, you can by following these instructions from this post, "How to make the text bigger".

  As you can see change the size of the text will depend on the program you are using.

  In Firefox, before opening the print dialog box, select Preview before print on the file Menu. In print preview, chose 100% instead of the scale to the Fit, or select the percentage of the appropriate size you prefer.

  It should look like this;  Adapt to a value of 100% and there are 5 pages as a result of the size of the text.

  

  Compared to; Scale to 'Fit to page', in this case there is only 3 pages that the police is smaller so more fits on a page.

  

  As you can see, the font size is larger when you choose 100% instead of scaling to fit page.

  Please let me know if that solves the problem.

• I am unable to print wireless from internet but able from Word.

  HP Deskjet 4580 using Windows 7 64 bit.  I am able to print a word document, but whenever I try to print from the internet it gives me the following error message:

  An error has occurred in the script on the page.

  Line: 2126

  Char: 1

  : Error unspecified

  Code: 0

  URL: res://ieframe.dll/preview.js

  Do you want to continue running the script on this page?  Yes No

  This is getting very frustrating and sometimes I can't print at all.  Help, please.  I use a Toshiba Satellite laptop.  I have an another Toshiba and am not having any problems with it.  I uninstalled the printer drivers and reinstalled and looked for updates.

  Thank you

  Hello jacspringer,

  Try the solutions mentioned in this forum thread to see if they help you solve your problem.

  Script error when you try to print from Internet Explorer 9

• DeskJet F 4580 druckt nicht mehr

  Hallo,
  VIELLEICHT kann mir helfen someone...
  Habe einen deskjet Drucker F 4580, beim Druckversuch kommt immer die message, Dokument nicht group werden kann, da keine Seiten markiert, obwohl ich die Seiten, welche zu sind, markiert would print.
  Würde mich über Antworten freuen sehr hilfreiche.
  Danke!

  Hi Cornelia,.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• message of 4580 incompatible cartridge Deskjet on two cartridges now bought. ready to throw out

  message of 4580 incompatible cartridge Deskjet on two cartridges now bought.  ready to throw him out.  I tried all the remedys.  Cartridge bought from Tesco and HP.  Can't see tesco giving me another now I have opened

  Hooray, went to my local store rechargeable, which suggests that the old one has been yet accepted by my machine, fill out one for... costs me half the price and yes it works now. Will take defective return to tesco for a refund. But my boy I lost hours of my life trying to sort this out and gasoline in the return of the goods.

• HP 4580 / I pad

  is my hp 4580 printer scanner copier airprint active... do to match upward with an i pad... it already has wireless... it's 3 years

  Hi Chris29,

  The number of 4580 is an interesting question because we have 3 different models with this number.

  The Deskjet F4580, the J4580 Officejet and Photosmart C4580.

  Well, the answer is the same for all three models.  Your printer isn't compatible Airprint and can not be rendered compatible Airprint.

  The good news, as long as your HP printer wireless, it should work with HP ePrint home and Biz, which can be downloaded for free on the Apple App Store.  Your iPad should be fixed on the same local network as your HP printer.

• hp deskjet 990cse printer driver

  I have an old HP Deskjet 990cse printer which needs a new driver.  I've recently updated for MacOS Sierra, and now the printer does not work.  I can't find an updated driver on the HP site.  Disappointment because the printer still works fine.

  Someone at - it a similar problem?

  Thank you.

  I managed to make it work.  I went into system preferences and deleted and then added the printer.  He now uses a generic driver.

• Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

  There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:

  DeskJet 710

  DeskJet 712

  DeskJet 720

  DeskJet 722

  DeskJet 810

  DeskJet 812

  Deskjet 820

  DeskJet 822

  DeskJet 1000

  The attachment contains a fix for this problem for Vista and Windows 7.

  [The patch does not work for Windows 8, 8.1, or 10 x 64 systems.  There are efforts to this address, if a solution is developed it will be shown here.  [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]

  First of all make sure that the driver for the installed printer.  If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)

  Apply the patch as follows: log in to the computer with an administrator account.  Download the patch by clicking on this link or on the trombone at the end of this post.  Save the hotfix on your computer, then unzip it.  Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3

  Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows.  You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.

  This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste.  Depending on your UAC settings, you may need to provide confirmation.  Also allow existing files to be replaced if you are prompted.

  This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.

  Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.

  Update - here is that of the more detailed installation instructions:

  Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer.  Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:

  MD c:\temp

  CD \temp

  Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).

  [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.]  If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]

  Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)

  *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).

  Net stop spooler (ensures that the files are not in use.)

  Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)

  Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)

  Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)

  NET Start Spooler

  Output

  [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it's OK to replace the files, say "Yes".]

  At this point, the patch is installed and ready to print.

  Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel].   If you use a make you converter USB / parallel it is supported in your operating system.  The following messages are reported by cables USB-parallel that are supposed to work in Windows 7.   A driver is required for the converter USB / parallel besides the driver of the printer.  For converters supported, it is usually provided automatically in Windows 7.  Note: the appropriate to select for USB-parallel converter port is often USB001:.  I've heard of cases where the port was USB002: or LPT3: as well.  If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.

  Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4

  If you use Windows 7 do the following: log in as a user with the administrater properties.  [The following assumes that you are using IE as your browser] Click on the here link and select "Save".   Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all.   If extract all is not an option, then click on "Open with" and select Windows Explorer.

  

  Leave the default directory and check the box "Show extracted files when you are finished", excerpt.   Click Start, computer, and type % windir%\system32\spool\drivers\x64\3.  Arrange the windows so that you can access the two parts of the window.  Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll.  Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.

  Note: %windir%\System32 is a system variable that points to the Windows directory.  For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer.  If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.

• HP deskjet 3540 series (D142AF: print validation error)

  I am trying to print from my computer hp laptop on my wireless printer and I got valedating of the printer... Please can you help me now?

  Welcome to the HP Forums!
  I hope you're well @denden2-_bé

  I read about the error you see when you try to print from your system from Windows 7 to your Deskjet 3540, and I hope to help.

  Please try using Print and doctor Scan for Windows to help troubleshoot printer problems

  If the tool does not help, try to print from other programs, uninstall and reinstall the printer.

  If the problem persists, let me know the details.

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

• HP Deskjet 2640 Jet advantage: printing without margins

  I would like to know if it is possible to print borderless with the advantage of Jet HP printer jet 2640 engineering.
  If possible, I would like to know how to set up the printer for such an impression.
  Thanks for the help

  Hello

  Your ptintrt doed does not support borderless printing. Full stop. The best you can get for border is round 3.2 mm for L & r 1.5 mm for Top and 14.5 mm for the bottom.

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-2640-all-in-one-printer-series/5357278/document/c03802179/

  Kind regards.

• HP Deskjet 3512 e-all-in-one Deskjet of HP P: 3512 e-all-in-one printer does not "standby mode"

  Printer will not wake from sleep mode.

  It has a static IP address. Works very well once he wakes up to the top. Doctor of Scan cannot even find it when he's asleep. 2 computers on home network have the same problems. Is there a way to disable the mode 'sleep'?

  Hi @tedd1,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 3512 does not wake from sleep mode. I'm happy to help with this problem!

  Please make sure that the auto power off feature is not turned on. As when it is off, you manually turn on the printer after 2 hours.

  Automatic stop function

• DeskJet F2180 + Vista 64-bit

  Hello

  I am currently in the situation that I need to print something, in the case of witch, I decided to use a HP Deskjet F2180 I had laying around. I use Windows Vista Ultimate 64-bit so I thought I was good off to download this file. Appearently that was not the case. It fails during step 3 of 4 of the installation process.

  The error States:

  SourceFile was not "C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\Toolbox\Toolbox1030.cab".

  And then it pops up with another error, a word on ""C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\hpzmsi01.exe " "

  Then it analyzes the log, and this is what is said:

  Error code: 193060200

  Now Launching = x: \hpzmsi01.exe - aioproduct_min l - XXX the list f
  X:\DIVins?. DAT
  Error message received: Sourcefile not found: X:\Toolbox1030.cab
  Make sure that the file exists and that you have access to it. -I am sure that I run the installer as administrator and I have access

  X:\Toolbox.msi failed with return code 1603
  MSIInstall() failed with 1603 for MSI Toolbox
  Exit code = 1603

  I hope that's enough for you give me a way to fix this detailed

  Sincere greetings

  its

  Message edited by its on 2008-11-23 14:46

  Try to download the software from this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-64285-1 & LC = on & DLC = in & CC = US & Product = 3177562 & os = 2100 & lang = in

  Save your desktop and run it from there...

  Keep us abreast of the concerns

• DeskJet 3632: Installing the software with the IPad

  Hi all, I just bought a deskjet 3632, I do not have a PC or laptop, so I can't install the software on the disk.

  I have an iPad,

  Please could you guide me through the steps of the installation (if possible) I've done a major boo boo, I bought the HP1512, not even give it a second thought that it would not be wireless.

  Thanks in advance

  Kee

  Hi kee,.

  Download and use the HP AiO Printer application to set up your printer on your wireless network If you have router:

  http://support.HP.com/RS-en/document/c03561640

  Open the app and click Add a new printer, and then follow the instructions on the screen.

  Note: f you can't find the name of the printer with the "setup" from the list of WiFi from your iPad, reset the printer settings by pressing on and now the buttons cancel and wireless on your printer for 3 seconds, then turn on the printer and make sure the WiFi switch on the printer flashes, otherwise press the WiFi button, and it starts flashing.

  Then follow the steps in the article to print and scan, so you can use AirPrint to print from your iPad:

  http://support.HP.com/us-en/document/c02623193

  If you have a router, connect directly to the printer using WiFi Direct, as shown below:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-4510-e-all-in-one-printer-series/5285997/model/5383027/document/c04090221/

  If you need to find the WiFi Direct password, press the Information (i) and the WiFi Direct () buttons to print a sheet with WiFi Direct name and the password, the same steps apply to print using AirPrint and scan using HP AIO remote.

  Kind regards

  Shlomi

• HP DESKJET 3545 e all-in-one: I want to know that what type of ink cartridge of contains in HP deskjet 3545 e ink advantage all-in-one

  ink used in the cartridge (dye or Pigment)

  Hello

  HP Deskjet Ink Advantaje 3545 uses cartridges HP 650 as example (or a different number of ink for different regions) - so that the black ink is pigment-based, the tricolor ink is tinted.

  Kind regards

  Shlomi