HP deskjet 6110xi-2 sided module

Similar Questions

• HP Deskjet 1510 - two-sided printing

  I can't print both sides. Quite true settings. But I don't check duplex function. How do I book? My OS is Windows XP 32-bit.

  The printer HP Deskjet 1510 cannot perform automatic duplex printing, it must be done manually. I'll tell how you to print double-sided of the Microsoft Word application. The same procedure can be used to print from other applications:

  To print a single document Page 2 faces:

  (1) load a single sheet of paper in the input tray.

  (2) open the Microsoft Word document and choose file > print.

  (3) in the print window, enter 1 next to the pages option.

  (4) click on print. This example displays the first page of the document.

  (5) turn the printed page and place it in the tray.

  (6) now print the second page by following steps 1-3 above and who enters the 2 next to the option pages.

  To print a document of several Page 2 face:

  (1) load a stack of media or the number of sheets needed for the print job in tray.

  (2) open the Microsoft Word document and choose file > print.

  (3) now, print all the odd numbered pages of the document first. To do this in the print, enter all the odd numbers next to option pages separated by commas. Ex: If you have a 6 page document, enter 1,3,5 next to the section pages.

  (4) click on print and will print the odd pages.

  (5) then, take the stack of printed pages, flip and load it into the input tray.

  (6) now print even pages by following steps 1-3 above and enter all the numbers next to pages option: separating with comma. Ex: If you have a 6 page document, enter 2,4,6 next to the section pages.

  (7) click on print and will print the even pages.

  I hope this helps.

• HP Deskjet 6840; double-sided printing option?

  My HP Deskjet 6840 does me not print double-sided. It is equipped for this and it is supposed to. He used with my old computer using OS X 10.5.8. The printer is connected to the iMac, OS x 10.6.8.

  Please help diagnose

  Thank you very much

  SK

  First of all, make sure that the accessory of the duplexer is enabled

  Enter System preferences Print Fax Double click the printer, and then click Printer Setup

  Make sure the duplex accessory is checked in the driver tab

  What Application are you printing from, it is any Application MS Office by a chance

  If so, the print dialog box is slightly different - click Copies of Pages at the top of the print dialog box, and then click page layout

  You should see the duplex option and can save your settings as a preset for future use

  If you use another Application, please specify which one is it

  In addition, check if you can see the option using any other app like Textedit, Preview.

• Photosmart C6180 module duplex not recognized in Windows 7 64 bit

  Duplex module has been recognized and worked perfectly in Vista but there is no option to add in 64-bit Windows 7.

  I discovered a few double-sided modules which are default to off on Win 7.

  Please try this:

  Double-sided printing option is not available, even if a (duplexer) automatic duplex printing accessory is installed

  http://support.HP.com/us-en/document/c01909142

• New HP6500A model 710 bis Duplex.

  Praveen_david solution does not work for my model!

  I can't put "duplex" under properties/device settings

  Is there a two-sided module I could buy - I can't find one!

  Michael

  Hello

  Model 710 has 6500 does not support automatic duplex unit unit, it's is not provided for this model and will not be detected by the device.

  For this series, only the model 710N support the.

• HP Deskjet 6988: The problem is how to get to 'double-sided automatically' with 10 WIN my HP Deskjet 6988 printer

  My Deskjet 6988 has been printing double-sided automatically (I have the setting of appropriate material) for the last 3 years. However, when I upgraded to Windows 10, who have enough work. No pilot is available online (HP site) and the disc that came with my printer does not work with Windows 10. Does anyone know a solution to this problem? Really, I love my printer and do not think I should buy a new printer for automatic two-sided printing.

  On Windows systems, the function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

  If your model does not have a duplex unit equipped (i.e. not one of the models with a suffix "d"), then you can't do automatic duplexing. You can do manual duplex printing (assuming that the printer driver supports this).

• Print double-sided on DeskJet 935c w / Snow Leopard

  I've recently updated to OS X 10.4 to 10.6.8.  Now, my HP DeskJet 935c printer will print on one side.

  At first, I could not print at all. I deleted and reinstalled the driver (the last seems to be under 10.5), how I was able to print, but the double-sided printing check box does not appear.  Under available (from 3rd drop on the print window), I can see a 'Double' option, but the selection is grayed out.  I have the duplex unit and have been printing on both sides for years, is not material.  I also tried to change the driver through Print & Fax (System Preferences).  The printer is HP DESKJET 930C; I don't remember if it was the case before.  I tried both the drivers HP DeskJet 930C and 935c Gutenprint v5.2.3 (and another at the outset, I believe).  ...  I don't have the print quality of the selection (draft mode, standard, best) options, I had before.  I don't remember the other options I had, but I have eight (of which some are not really options) and I think I used to have about twelve years.

  My printer does not appear in the http://support.apple.com/kb/HT3669#HP.

  Does anyone know if there is a solution to this problem?  A new driver under development?

  Hello

  Unfortunately, a new driver will become unavailable because the product is not supported with any Mac SO X higher then v10.5.

  The same information listed for the Deskjet 930c apply for the 935C as part of the same series:

  http://support.HP.com/us-en/document/c01856359

  According to the analysis that follows, there is a known issue with duplexing for some old deskjet models:

  http://sourceforge.NET/projects/Gimp-Print/Forums/Forum/4358/topic/3563875

  As written in here, the user reported that he had him using the HPIJS driver.

  Hope this information is useful for the problem, you

  Shlomi

• HP Deskjet 4615: After uninstalling the software HP4615 I get a "could not start HPStatusBL, the dll module.

  After uninstalling HP4615 and then by installing the HP4645 software, I get the following message when starting "there was a problem starting C:\program HP HP deskjet 4610 series\bin\HPStatusBL.dll. The specific module could not be found. "How can I get rid of this message?

  Thanks for the support. To see that 'Monitor alerts ink' was a job. Without success. It does not appear in the startup routine. The quickest way was to download free software called «For Windows startup Inspector» This program finds the hidden routine so that not even a PI he would get. It took less than a minute to clarify "ink monitor alerts" from the beginning. Play well!

• print double-sided on the Deskjet 2540

  I've just set up my HP All in One Deskjet 2540 after reading recommendations for that. I never see it mentioned by anyone... is this printer not automatically turn the page when asked two-sided printing? You can get double-sided printing by manually feeding the first side printed? Thank you...

  Thank you very much.  I plan to return it. I appreciate your time to answer.

• Print double-sided for Deskjet F4280

  Hello

  I m not able to print double-sided for my Deskjet F4280 printer on my mac only. I can do it on PC, but not Mac because it is disabled. I need help because I use my Mac laptop daily, and it of a complete waste of paper and money and is too heavy to carry paper that is printed single-sided.

  Thank you

  Hello

  Manual duplex printing from a Mac running is different from how it works on Windows PC.

  Please follow the steps below to perform the required task.

  An option to perform manual duplex printing is to use the Pages to the printer setting, you can find below:
  http://support.HP.com/us-en/document/c01663233

  Thus, another alternative is to use the HP two-sided printing software:
  http://FTP.HP.com/pub/softlib/software12/COL35975/MP-88750-2/HP_Two-sided_Printing.dmg
  You can access this tool by clicking the PDF button at the bottom of the print dialog box, and then select double-sided printing and follow the on-screen instructions.

  Kind regards
  Shlomi

• DeskJet 3520 problem PDF print double sided

  have a brand new HP Pavilion with deskjet 3520 computer.  and windows 8.

  duplex printing on the deskjet printer test, found stall to halfway through printing.  support got me to download the new firmware for the printer, and then it works better. \

  multi-page prints word documents double-sided without problem. but the PDF documents will not print entirely double-sided.

  Gets to halfway through and hold; research in the print spooler, shows ' printing... error.

  tried foxit and adobe, same result.  both printing single-sided without problem.

  someone at - it any help?

  Thank you

  Vern

  I solved the problem myself by plugging the USB directly to the computer rather than an extension. \

  Thanks for your interest,

  Vern

• C7250 printing duplex job, popup saying "automatic two-sided printing Module missing."

  Hi, whenever I try to print double-sided, I get the popup that says:

  "The document has been configured to print by using the Automatic Two-Sided Printing Module, but module is not installed in the device. The document will be printed recto. »

  After I pressed the 'Print' button, job goes to the printer and print OK as a duplication. You can fix this? I have this problem for a year now, and I'm tempted to this problem.

  And he sees in duplex printer properties.

  Thank you.

  Looks like the problem disappeared after the software update. Thank you!

• DeskJet pro 8500 A909A: deskjet pro 8500 copy double-sided with ADF

  You can use the ADF to copy number 2 of the original faces and print 2 copies faces?

  Hello

  No, but please try the following solution:

  http://support.HP.com/us-en/document/c01684680

  Important note:

  Double-sided copies can be made if the HP all-in-one is a front side printing accessory. Sided printing accessory is standard equipment with some models or can be purchased separately.

  Kind regards.

• 2135 Deskjet ink advantage: how to resume two-sided printing after power failure

  I was doing a face print job two. at halfway, there was failure, now I want to resume my print job where it was left. How to do?

  Hi @kapilguj,

  Welcome to the HP Forums!

  I see you're wondering how to resume printing duplex after a loss of powere, with your printer HP Deskjet Ink Advantage 2135. I'm happy to help you!

  You will have to start the print job because there is no way out of the where you left off with this printer.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• DeskJet Pro 6230: double-sided printing

  Recently should a printer 6230. First time I tried duplex printing, it was fine.

  Now just prints individual sheets (no double-sided). Desktop HP printer Assistant does not work that he doesn't show me the pages of help on any topic at all.

  Help appreciated.

  Thanks for letting me know that damienfosseyof information.

  It looks like a software problem.

  You could always restore the printer in when everything worked correctly.

  How to use Windows system restore?

  I suggest to uninstall and then disable all the start up programs and temporarily disable the Antivirus software to see if that is causing the problem. How to use MSCONFIG. Click the Startup tab and click Disable all.

  Reinstall the most recent drivers. Series of HP Officejet Pro 6230 full feature software and drivers ePrinter.

  Ask OKI Print this Long edge of page and print short edge explained.

  I hope this helps. Thank you.