2135 Deskjet ink advantage: how to resume two-sided printing after power failure

Similar Questions

• HP Deskjet Ink Advantage 1515: stop the test page printed for all-in-one printer, HP Deskjet Ink Advantage 1515

  How can I stop my HP Deskjet Ink Advantage 1515 all-in-One printer to print a test page everytime I STARTED printing?

  Hello JoshSimon ,

  Welcome to the HP Forums.

  I see that you have a problem with the printer printing before you print a test page.

  If you turn off the printer at the end of the day, please do not.  Turn the printer on/off will result in printing a test page.  If you are concerned about the printer lost power, and that's why you stop, the unit actually built in sleep/stand mode that will kick in when you are not using the printer.

  Once a print job is sent to the printer it then wake up and do the task at hand.

  In addition, make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  See you soon,.

• DeskJet Ink Advantage - the new generation of affordable printing

  See the link below for more information on Ink Advantage printers

  http://h41112.www4.HP.com/campaign/ink-advantage/EMEA/en/originalhpink.html

  • DeskJet Ink Advantage 2515
  • DeskJet Ink Advantage 3515
  • DeskJet Ink Advantage 3525
  • DeskJet Ink Advantage 5525
  • DeskJet Ink Advantage 4615 / 4625

  

  

  

• How to enable two-sided printing on MacBook Pro with Canon MX490 printer

  Hello

  I have the MacBook Pro (retina, 13-inch, early 2013) and OS X version 10.11.4 (15E65) and Printer series Canon MX490.

  When I try to make a double-sided, the printer settings printing does not allow me activate two-sided printing.

  

  Also when I go into the settings of the printer, there is no option for me to select this option to enable printing double-sided or duplex printing etc..

  

  When I try to print with TextEdit settings, I still get the same printer settings and it does not allow me to enable two-sided printing.

  I couldn't find answers online, and frankly it's frustrating. I would appreciate if anyone can help with the problem.

  Thank you very much!

  This is the screenshot of the settings under the printer to textedit. Sorry I don't tie with the original message earlier.

  

• Example: HP PHOTOSMART 7529e: how to make two-sided printing automatically with printer HP 7520

  All I'm doing is to make my printer two sided front or double.  No matter what I check IT DOES NOT WORK.  I checked "2 sides, 1-2, NOTHING.  What amazes me is that it worked until recently and now he just does not have double-sided printing.  I'm probably doing something wrong, but WHAT?

  filgrastin

  In General, duplex printing is consulted / adjusted printing preferences.

  If you print from an application, for example, in Word or in your browser, you reach the printing of the preview preferences before printing.

  Reference:

  Manage the print with preview output before printing

  Excerpt:

  • Print - print options access preview

  The browser page > file > print > properties

  Access Printing Preferencesproperties:

  Paper Source (tray selection), paper size, media, Orientation, print on both sides, page order

  Reference: Printing Preferences

  ================================================

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• DeskJet Ink Advantage 2135: Deskjet Ink Advantage 2135 do not install on El Capitan

  I ve been trying to install my printer HP deskjet for two days, the printer is connected via a cable UDB and already downloaded the easy start of HP and he has almost finished installing (in fact, I can already see my printer in the options, but if I try to print something with it, it does not react) but it gets stuck after step where I select my printer and click on continue the message, it shows me says to make sure my computer is connected to the internet and I checked then and everything works perfectly but it will show me the same message.

  Hello

  Directly download and install the software below:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-printer-Essentials-L-4_9_0.pkg

  Once open system preferences > Printers & Scanners and click on the plus sign to add your printer, be sure to select the printer model in the menu drop down.

  Kind regards

  Shlomi

• HP Deskjet Ink Advantage 4515: Photo cut off when printing, but only on glossy paper!

  Hello.

  Im trying to print 10 x 15 normal image.

  Whenever I try to print, that he cut and every time that different! That's what I did.

  1.) tried to connect the printer via the USB port. Did not work.

  2.) tried different programs to print. Did not work.

  3.) exchanged new original ink. Did not work.

  4.) tried different paper glossy. Did not work.

  5.) tried to use Scan Doktor.Didn't work.

  The only solution that worked was that I tried to print on paper 10 x 15 non-glossy while the image does not get cut off.

  As you the cann see the picture at the top is printed on the other side of glossy paper (not glossy side) and it worked fine. Just the quality is terrible.

  All the solutions for this? It would be great...

  Thank you

  Greetings

  

  In the paper here troubleshooting steps can help solve the glossy feeds does not correctly.  I would say that the cleaning rollers as shown in the solution of two.

• HP Deskjet Ink Advantage 3545: Unable to download 'HP Print Service Plugin' in my new Samsung rating 4

  I understand that I must download the "HP Print Service Plugin' to allow my new Samsung rating 4 empty wireless printing. I tried several times to download the app, but each time to fail with the following message ""HP Print Service Plugin "could not be downloaded due to an error (495)."  The app is not compatible with the phone?  If Yes, are there any other application / collaborative I can print empty my new phone Samsung Note 4?  The specs of the device: Adroid version 5.0.1.

  Your help is greatly appreciated.

  Thank you

  Hello

  Have you tried to do a few more space in your Android device.

  Try to move all the pic/app on the memory card and then try to new downloadning plugin for printing from HP.

• DeskJet Ink Advantage 3525 e-all-in-one printer

  By mistake we have accidentally changed the language of the printer of the English Simple Chinese however being not not be able to read Chinese, we cannot change the language setting in return.  We tried to use the 'X' button to return to the default settings, but by default the language now is Chinese we are stuck.  I tried all means to restore, but it seems that I need someone who speaks and reads Chinese!  Anyone have any helpful suggestions please?

  I sent you a private message. Please follow the steps to select the correct language.

• How to wake up a T42 - after power failure.

  I just changed to a T42 as a home automation web application server in a vacation home that is unoccupied for weeks and months.  I'm gone with a Thinkpad retired because the processor running at 40 degrees Centrigrade with its fan-Off in our cool basement unless there is some computer activity... hoping the Thinkpad would unnattended for years in this quiet situation with the HDD as the only moving part.

  When the power goes out, I have an inverter for 2 hours, plus the Thinkpad battery for 4-5 hours (off screen), but then it stops with an extended power failure.  We cannot go back to this place for months to re - turn on the computer.

  The bios settings on T42 for "Startup Timed" do not work for me or anyone else I saw on the Thinkpad forums.

  Or, using the Task Scheduler with the "wake the computer" option when you run an application (such as the calculator or Notepad) do not wake the T42 from sleep mode. (The laptop could go to sleep when the battery reaches 50%)... then having the scheduler run Notepad all morning at the cases where the computer is in standby due to a power failure in the course of 24 hours prior... but it does not work.

  Is there another way to start or wake a T42 on a calendar or a network drive?   I didn't "want to solder connections in the power switch - although if it is possible if I could use a phone remote access to the automation system to turn on the computer with a closing contact, but his disorder at."

  After testing, I switch to Windows 7 Pro. The T42 can going mode sleep after x minutes on battery. It can be awakened by running a lazy batch file by using the Windows Task Scheduler.

  Thanks for your suggestion

• Until Deskjet ink advantage 3545: print two slides on a single page

  How can I print two slides on a page?

  I used Microsoft PowerPoint mobile, then I clicked on print

  I found no print two slides on a page see photo

  6.0 Android

  

  Hey @Hojhoj,

  Welcome to the Forums of HP Support!

  I appreciate that you try to print multiple pages per sheet from your phone on your Deskjet Ink Advantage 3545 e-all-in-one printer. As the Android is a simple operating system, the print plugin or the HP ePrint app are able to print multiple pages per sheet. If you need to do, your options would be to either change the file to give the impression that you have multiple pages per sheet before printing or use a Windows PC or Mac to print your document instead.

  Please let me know if you have any other questions. If not, have a great week!

  If this solves your problems, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

   

• HP Deskjet Ink Advantage 5525: Printing blank pages

  Hello

  Could someone let me know what can cause problems for printing white pages only.

  Those original, changed, I have completely new cartridges for my printer.

  When I print the diagnostic quality it prints all colors except black.

  I checked everything suggested on the HP support page, but still does not.

  Any solution to this problem?

  Thanks in advance.

  Hey @Vodena,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the impossibility to print in black ink of your Deskjet Ink Advantage 5525 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after the above, that the printer will print not always black, the printer must be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are able to print or send to a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• 4645 Deskjet ink advantage: deskjet ink advantage 4645 ERROR

  It is said that the cartridge black must be replaced by a deadlock on the screen message.

  (You can do anything)

  After you have installed a new black, cartridge original HP 650, the message remained--if we have changed the color too.

  Message remains: check the old cartridges (really less than a month old and there is no same het at 100 pages on them) and they were more than half full - two of them!

  So now we're stuck - obviously something stupid with the printer, what can I do?

  Of course, replacing the cartridges _again_ is a waste of money.

  See you soon

  Hey @brahmix,

  Welcome to the Forums of HP Support!

  I see that you have some problems with a cartridge error on your Deskjet Ink Advantage 4645 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document explains How to fix the mistakes of the cartridge on your printer.

  If after following the above, you cannot clear the error, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet Ink Advantage 3525: HP Deskjet 3525 not print black, but print [Black] symbols!

  Hello.

  I have HP Deskjet Ink Advantage 3525 e-all-in-one printer.

  The printer stop printing in black.

  I am trying:

  1. put the new cartridge HP 655 black original .

  2. I do several head cleaning cycles.

  3. I gave for printer.

  4. I remove the cartridges, turn the printer off, swith on the power cable, wait for mo to 60 seconds and plug everything back.

  5. I clean the vents and the surface of the black cartridge.

  6. I do everything, what I see in the paper by HP - Printers - HP Deskjet 3520, color or black ink not print

  And all of this does not help. My HP 3525 does not print black.

  Moreover, if I print a test page for the printer, I see racks, which are printed in black!

  At the same time, the black level is not printed!

  Please, help to repair!

  Hi @MobileWanted,

  The printer is probably using composite black. A mixture of the color cartridges will create black.

  The print head is probably clogged. This model has a permanent print head. Not one of HPs, my personal recommendation is to use the solution put forward in the next video.  I suggest you only do this if the printer is out of warranty: How to fix a HP printer, printing black ink not.

  If the printer is still under warranty, please call for a replacement printer.

  Thank you!

• HP Deskjet Ink Advantage 4645: Cannot save as document Scan

  After that I scanned a document, the following message appears:

  "The HP scanning application could not save the file to the specified location.

  I don't know where he is trying to save in, and why I get the message?  I think I'd have an option as to the location to save the document?

  Thanks for anyone's help.

  Hey @Lulu5,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of your Deskjet Ink Advantage 4645 e-all-in-one printer to your PC in Windows 8. I can help you with that.

  To change the folder HP Scan try to analyse to open HP Scan, and then click Advanced settings. In the next window, click the Destination tab. From there, you can change the default to scanning location.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.