HP DeskJet D4160, prints too small

Similar Questions

• HP Deskjet F2430: Printer printing too small

  My operating system is Windows 10.  I'm not sure about the size of the bit.  My HP Deskjet F2430 is too small Word printing online.  I checked the font size & it is set correctly, but the impression is so small that it is barely readable.  Thanks for your help.

  Welcome to the community of HP @yellowrose22052,

  I read your questions about printing HP Deskjet F2430 too small Word online. I will certainly do my best to help you, however, I would ask that you please let me know some more useful information to help me the problem of the search for you.

  Please respond to me with the following. If there is no action here that you haven't tried, please try them before you answer and include the result in your response to me:

  How the printer is connected (USB / wireless / wired / Bluetooth)?
  Did you test functionality of the hardware (made copies) and they work successfully?
  Have you tried printing from different programs (IE, Chrome, Firefox) web browsing?
  If you are using Windows, run the print and Scan Doctor and understand the results.
  Have you made recent changes to your establishment (moving, upgrade, downgrade, new software, new router, etc.)?
  Have you completed all the updates of Windows/Mac OS?
  You see messages of error codes and if so, what they say and where do you see them?

  Thank you.

  In the meantime, here's a possible solution, that you can try.

  Open the web browser, Print, then select the layout option. Make sure that the print format is set to 100% and that you did not select the shrink to fit.

  I hope this helps and have a nice day.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• I have a HP Deskjet D4160 printer. The reset button will Flash. Diagnosis HP said there was a "breakdown of pen", but he didn't give any directions on how to fix it.

  Original title: breakdown of pen deskjest d4160

  I have a HP Deskjet D4160 printer. The reset button will Flash.  When I ran the HP diagnostic he said there was a 'pen failure' that had to be fixed, but he didn't give any directions on how to fix it.

  Hi Fred Cornell,.

  ·         You have any problems with the performance of the printer?

  ·         What operating system is installed on your computer?

  ·         The printer works well before?

  You can check the link mentioned on official website of HP that describes the problem for the specific printer model you are using.

  Flashing lights in the HP Deskjet D4160 printer

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00635074&cc=us&DLC=en&LC=en&product=501857#n129

  Alternatively, you can contact HP support for help on the issue.

  HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Let us know the results.

• Microsoft Paint - Image is normal on screen but prints too small?

  Microsoft Paint - Image is normal on screen but prints too small?

  When I'm in the paint all my settings are the same that I use always and my image appears normal size on the screen but when I go to print I put it on the scale to fit on page 1 x 1 (so it's all about a piece of paper), but then I have print preview and the image is just a 1-inch picture in the upper left corner. I had done several times in the past and never had a problem. Why does the image offset? Also when I remove the scale down to 1 x 1 page it can tile the image on 4 pages. So if the image is the great whys it shrinks it do much when I as a single piece of paper? Help!

  Go to the options of paint by clicking on the top left of the menu bar icon (the one to the left of the 'Home' that looks like a sheet of paper lined w / an arrow next to it).  Choose 'Properties' from the menu drop down.  Keys to your measurements of paper (ie. 8.5 x 11 "or 8.5" x 14) depending on the direction you have chosen - portrait or landscape (under print options: Page layout) which should solve your printing problem.  Unfortunately, the program seems to use some default preset every time that you open the Paint program.  That's how I came across your question;  I'm trying to find how to change the default setting. During this time, I guess that we just have to continue to change it before printing.

• HP Deskjet D4160 printer range: use a printer on a network.

  Well, I have a HP Deskjet D4160 printer. I installed on my HP laptop on windows 10 home. Now, I want to use the printer on both computers, but on a single network. I don't want to install the software of the printer on my main computer in my room. I have 10 home windows on my desktop in the bedroom. So, how can I get this done?

  You only usually one network at home, regardless of the SSID. Install the software on your in your room can connect you, or use Windows file and print sharing. Simply search the web file and print sharing. However... Sharing installed printer drivers for you.

• HP Deskjet 1512 - Page too small / Unknown Error

  I just bought HP Deskjet 1512 all-in-one printer. Installation went normally, however, I can't print anything Windows Vista 32-bit. Here are the various error messages that I get:

  "An unknown error has occurred" - FireFox

  "DΘmarrer can't feel" - WordPad

  "DΘmarrer can't feel" - MSPaint

  "Page too small to print a line" - the notebook

  Another oddity is that WordPad will display only a single letter per line. Microsoft Word displays not only any text whatsoever, not even of previously, working document. Any attempt to print from MS Word results in nothing happens, not even an error message. If I uninstall the printer and then Word, WordPad and all previous documents, poster correctly once more. Only when the printer is installed I see these quirks.

  I tried everything and nothing has solved the problem. I have uninstalled/reinstalled the disks and drivers online. I used the Print and Scan doctor says all right. Checked all cables, rebooted, reconnected, crossed the 50 of the obvious things to check. As far as I can tell everything works; ink, printer, scanner, copy, etc.. I have made copies and scanned with no problem. Test maintenance pages also print without problem. I suspect that the problem is the printer drivers for Vista. For some reason, it says page is too small, so clearly I have paper loaded into the machine and selected letter size in the main tray.

  Is there something that will fix this problem? I may need to return to this unit and back to Canon.

  Finally, I returned the printer for a refund. Thanks for trying RnRMusicMan

• Print too small to read from the printer to the Page shrink on 30%

  When printing on Xerox 7225 e-mail, printing is too small to read even with retractable page on 30%. last email is from an AOL account and wrap the header lines. This problem is new.

  Select the e-mail
  'File' > 'Print Preview '.

  You can change the font size by changing the 'ladder '.

  increase level to increase the police.
  so start by selecting: scale = 100%
  When everything looks correct, click on the button 'print '.

• hp deskjet 1510 printing too dark

  Hello

  As says the subject, my HP Deskjet 1510 printer is printing too dark. Does anyone know how to change this?

  Thank you

  Thanks for the reply.

  You try to print a photo, if so what program? If you print word documents, try printing in draft mode.

  I would like you open the printer from the desktop icon or go to Start> all programs> HP> Deskjet 1510> 1510 Deskjet series. The Printer Wizard, click the estimated ink levels> Services> print quality diagnostic report, not this dark printing page as well?

• HP officejet pro 8600: after printing too small font size

  I try to print from a pdf file, the unprotected, I can change the font size in the pdf reader, sumatra, but when the pdf file is printed, it is much too small for me to read easily. that is, on a scale of 10 completed printing printing size is that while I need about five. the printer prints all from the pdf file, but the final print is too small for me. email printing, web GGP etc all work fine. Cannot find anywhere to change the font size in the printer itself.

  the pdf, I am printing is a motorcycle manual.

  very grateful & thanks for any help.

  greyswan

  greyswan

  Welcome to the Community Forum of HP.

  The provision allowing to adjust font sizes - in most cases, at least - is done at the application level.

  So adjust the display and scale printing, before you send the print to the printer.

  Most applications call this preset Print print preview function: print preview is available in the browsers, editors, and viewers like Adobe Reader documents.

  I'm not at all familiar with the Sumatra PDF Reader - maybe this PDF Reader does not preview before printing?

  Perhaps, if it is available, print preview does not offer the necessary adjustments to allow printing to adjust the scale or the size of the page as appropriate.

  I can offer the following: it may or may not be useful, although it may point you in a direction that helps you to find a solution to your dliemma with your player of Sumatra.

  Manage the print with preview output before printing

  Please, take a look at the section on PDF files.

  At the very least, you can consider the following strategy:

  • Enlarge an area of a page to the screen you need to print
  • Create a Snip of this region
  • Save the capture as an Image
  • Print only necessary as big Snip

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP DESKJET 1510: print too slowly

  Hello, I got hp Deskjet 1510 printer yesterday, I installed it successfully but when im trying to print prints too slowly I don't know why I tried to take the cartridges too see if that is the problem but it was not she always feel too slowly and its so boring

• DeskJet 3510: Print too large Deskjet 3510

  Lately, whenever I have print anything it is printing too big - margins are off page. I did the align printer and can't find anything in the settings of the printer for this affect where it prints the correct size - it is not set in landscape mode and is set to portrait, so I do not understand why it feels like landscape. Anyone know how to solve this problem.

  @Pita56

  Welcome to the Community Forum of HP.

  Most of the time, the size of the police - margins, the scale - and 'together General' that you print the page is managed in the application you are using at the time that you configure the print job.

  In most browsers (Firefox, Chrome, Internet Explorer), publishers of documents (Word, free) and PDF (Adobe Reader and Foxit) readers, this "setup" is run a program or a called subroutine print preview.

  You (in other words, the print job) can get into trouble when the scale of the Page does not match the study - maybe the margins are not (and must be) set "Fit to Page".

  Font sizes may be too small - or large - for similar reasons, but it can become a little more complicated than that.

  It is also true that certain documents and Web Pages are best printed in landscape mode in Portrait - and it is not always clear in glancing at the Page that is best.

  You might take a look at the following and see if the explanations and examples can help you sort through what is happening in your situation:

  Manage the print with preview output before printing

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• cannot read the docs pdf printed, too small

  When I go to the website web sonye for download instructions / manual of my recorder, it load in pdf format. When I print it, its too small to read.  I can zoom in and read, but if I print on zoom, it always comes out even, too small to read.  In the print settings, I tried to print as Image, settings of the A4, I just want to have a manual that I can read.  Thank you AND

  Hello

  Let me suggest a lightweight, freeware alternative for you - Sumatra PDF reader - I use and recommend. Even if you return to the use of adobe, try the Sumatra will tell you if the problem is adobe (known to happen) or Windows (also known to happen). Download here: http://download.cnet.com/Sumatra-PDF/3000-18497_4-10698785.html?tag=mncol;1 .

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Photosmart 6520: Prints too small

  I'm more able to print a normal size postage label. I used to and now suddenly it prints so small that there is no way a factor could read them. Any ideas?

  Hi @Pattinyk.

  Welcome to the Forums of HP's Support. May be that the print settings need to be adjusted. You print what program postage labels?

• My smaller websites, do not fill the screen. Print too small. Changing the font in 'Options' does nothing.

  I have downloaded Firefox and IE. With IE, my home page fills the screen and I can adjust the display size (police). Now with Firefox, the homepage (FOX News) is crumpled in the middle with very small print and I can't find hoe to adjust the display.

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• The printer prints too small fonts when I try to print a Web page.

  My new printer is Photosmart D110a. It is printing documents from Microsoft word, but when I try to print a document on a website, the font is so small that I can't read. How can I adjust the settings of the printer so that the font size is a 12? I don't think I have properly configured wireless controls, but I need to make a cloud of printing or things like that. I'd appreciate any help you can give me.

  OK, well, when you print, use file > print or Ctrl-P on the window that appears click Preferences, and then click the effects tab.  See if you print in Acutal size, like this: