HP deskjet1510 is advantage: when I launch the scanning or copying idont do, said device buisey, connected, priter prints from computor

Similar Questions

• When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  There is a problem with these models of Leica cameras providing accurate information in the EXIF data F stop. Photomerge for HDR and Panorama will use this information to "mix" the image files. A solution has been found using an EXIF here Editor:

  Re: LR/ACR Pano merger combining Glitch

  This may or may not be the source of your problem, but worth investigating. Try to use any other device non-Leica and do a quick test Panorama or HDR and see if you get the same message.

• When you press the button to update on ipad, it says cannot connect to store

  When you press the button to update on ipad, it says cannot connect to store

  Contact Apple for problems with their equipment and services. http://www.Apple.com/

• I get this message when you launch the browser in Photoshop CS 3

  I just got a new macbook pro that I allocated GB 401 on my bootcamp for windows xp partition, and I put Photoshop CS3 (windows version) on this partition, which about 80-90 GB is used while the rest is space free space. I also put my photo on this partition folders/files, and when I run the Photoshop application, I get this dialog box when I click on 'File' > 'Browse' (see image).

  When I launched photoshop on my old laptop (HP Compaq Presario X 6000 running Windows XP) I've never had this kind of message - is something wrong

  How can I do if I don't get this message?

  Here are the specs of my macbook pro:

  Model name: MacBook Pro

  Model identifier: MacBook Pro5, 3

  Processor name: Intel Core 2 Duo

  Processor speed: 3.06 GHz

  Number of processors: 1

  Total number of cores: 2

  
  

  How can I paste my messages from another forum on my posts here? (Frustrated).

  It does not properly detect some most likely SSE extensions, but don't let it stop you. It's just a side effect of computers becoming too recent for 3 year old software. Even if in strictly technical terms, there would be a performance degradation, reinforced specs of the newest processors would more than make up for it...

  Mylenium

• Get: error in device: device not authentic when you launch the app VirtualBench

  When I start the application virtual bench (10 x 64 Windows) I say device error dialog: "device error: device is not authentic" and am no longer able to connect to the device. At one point, I was able to connect to the device via the USB port and also via wifi. I have rebooted the machine, pedaled power, uninstalled the drivers, reinstalled the software virtual bench with no luck. Any advice?

  After an attempt:

  -Reset the device via the button on the back of the device of virtual bench

  -remove the installed drivers

  -resettlement of bench virtual application

  -another machine

  -connection via the access point

  -USB connection

  -try a different USB port

  Still not had luck. Until finally, I decided to unplug the power on the virtual bench cable and plug it back. Looks like it's a pure reset of some sort. Now, I can connect successfully to the device

• Black screen when I launch the Satellite A100-773

  Hello

  I don't know what is happening
  If I press the 'POWER' button at startup, I got BLACK SCREEN all the time,
  If the screen is defekt? or what else can we?
  the lobe of the HDD to burn?

  It verifies the DVD-ROM and the CAPS LOCK, and another lobe burn upward, as allways standart!
  but after that if I hit the ' CAPS LOCK ' button it don't burn.

  * edit1 *.
  If I press the key "FN" for more function, the lobe burn, but I can do it only for a few seconds, then there reakt custom more

  thx for the help...

  It is difficult to tell if it s a defective GPU or the internal laptop display.
  You can try to connect an external monitor to the laptop to check if something appears on the second monitor.

  If you see any picture or anything else so I guess that the graphics card is dead.
  This could be the case value because the GPU is fixed on the Board and that's why the whole motherboard replacement would be necessary.

  Seems you have to reach a point of service authorized in your country for the control of the laptop and the diagnosis of the error.

  If the warranty is valid everything should be done for free!

• Explorer crashes when you give the command cut/copy

  When I select several files on the computer is ok but when I give the control computer cut or copy freezes and then explore crashes. After awhile, it restores but whith many programs of the bar closed tasks and the record that I was reviewing for the closed time...

  In many other forums, I find that this problem happens to many people...

  I hope someone can help me

  Have you tried a disk cleanup and Defrag recently? Also, there may be several programs that run in the background, some you don't want. I also suggest that perform you a virus with a check update program antivirus.

• When you build the deployment, install reportgen_txt.seq, but what program removal remove reportgen_txt.seq from the TestStand\Components\Models\TestStandModels directory?

  Basically, I want to install a reportgen_txt.seq to the Dir\Components\Models\TestStandModels TestStand Custom file during the installation of the program but when I remove the program from my computer I want to keep the custom file reportgen_txt.seq... Now when I remove the program, the custom reportgen_txt.seq file is also deleted.

  Someone at - it ideas in addition to having to have a second deployment to install the file?

  Help, please!  And thanks in advance

  I have advanced and implemented using custom orders, worked like a charm!  Thank you!

  I just added a personalized using xcopy (see below).  I needed three files to be copied in specific directories once they have been installed in the installation directory.  My three preconfigured files are:

  reportgen_txt. SEQ

  Users.ini

  TestExec.ini

• When I use the wizard to transfer between Windows XP and Windows 7 files disappears from Windows XP?

  When I use the files and settings between XP and 7 Transfer Wizard files on XP removed or will I still have the original as files?

  The files and Settings Transfer Wizard won't work on Windows 7, you must use Windows Easy Transfer.  But in both cases, the original files are copied only - not deleted.  They remain on the source computer.

• How is my scanner is registered, but I can't get anything to happen when I hit the scan document on my printer

  I can't scan anything

  Hello, Bret and Lisa,

  Printer brand and model, if you please.

  You receive error messages when you try to scan?

  Have you tried to uninstall/reinstall the software?

  Open Device Manager and right-click on the scanner driver

  Select uninstall

  Restart and try again scanner

  The problems of scanning

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

• XP computor - when I run Firefox there is no file tab/button so I can not print from the web how to make this file button to atart upward of firefox?

  I am a rookie to computors - I can't print from the web with xp - at the start of firefox there is no buttons above the address bar if no button give or anyhthing - help please

  Thank you

  You can start printing via the keyboard using {Ctrl + P}.

• I have a HP 6210, when I try to scan or copy I get a "scanner failure".

  I have a HP 6210 for a few years now. I did a lot of work with all its functions. But now I can not copy or scan anything. The message is always "scanner failure".

  I tried with different OS but nothing works.

  Is this the end of his days?

  And the strange thing is that this happens only when I try to scan from the plateau.

  Charger scanner works perfectly!

  But I need to analyze both the fotos!

  It seems that the scanner mechanism which is integrated in the glass flat has developed a hardware problem. Please see the document located here for the procedure resolve a scan failure.

• Changes in color of the screen when I launch the bridge, as if change ICC profile

  I use the native lcd profile on my macbook Pro 17 "under Yosemite 10.10.5.

  For the moment, I launch Bridge (CS5) my screen changes as if I would change to a profile as "adobe RGB (1998)" (blue gray)

  While the bridge is open, it remains the same at all levels, wathever if I'm in the finder or another application, when I leave it turns its back to normal.

  If I try to edit profile in the meantime Bridge is open simply rotate yet more blue if I select another profile as "adobe RGB (1998).

  He returned to normal when quiting greys Bridge. I run it with the hold option key and clean all cache and prefs, but it does not help

  I did fix the permission and clean most of the system and other caches, not useful either.

  This does not happen with photoshop CS5 or other adobe applications.

  He has even changed during an attempt of "extensions Manager" and select bridge to install (not to open deck), when clicking back on photoshop b.e.the screen made it back to normal.

  Where is the bug?

  Thank you ~ Mohit,

  but this isn't because of the calibration. He gets as a 'blue layer' above everything and can not get corrected by calibration.

  I found the solution on apple discussions:

  https://discussions.Apple.com/message/21532737#21532737

  It was in fact not an Adobe apps problem, even though to me it seems so it's a matter of dedicated auto-commutateur video card problem (or something like that) and the solution

  is: cleaning the cache of ColorSync, I have done as recommended with Onyx app and has worked well for me.

  It seems also come back after a correction of permission, but then just re--clean the cache color Sync.

• When I launch the iPad Safari displays a message that it has blocked for security reasons

  When I open Safari on my iPad, a message appears and says that your Apple device is locked for security reasons, we recommend that you call 1-800-914-1792 number helpline as soon as possible.

  I try to fill it trying to get rid of it, but it won't go away. I don't know if it's some sort of a scam oh what does anyone else have this problem?

  Please refer to this, stop advertising windows pop-up and adware in Safari - Apple Support. Please make a back up and save your important files, your device restored and updated to the latest version.

• WHEN WILL LAUNCH THE NEW VERSION OF MUSE WHO MADE SITES SUCH AS A DEMO AT MAX CONFERENCE

  Hello

  
  I just saw that muse will fully sensitive - what will be the official version launched - some information on the calendar are important so that I apply the new technologies to work for best results. Any member of the staff would like to comment on the timing of the release?

  
  Jay

  The update will happen later this year, as announced at Adobe MAX Release Dates are announced by management before a release date of an update. We will announce it here as soon as the public announcement will live. If you are found out at CC, you will get information by e-mail, as well.