HP DL380p G8 - packets ignored on the management port but not the virtual computer.

Similar Questions

• diving USB hard drive appears on the Control Panel, but not on MY computer

  Drive hard USB part on the Contrlol Panel but not on my computer.

  Hi Frank,.

  Thanks for posting your query in Microsoft Community.

  If I understand you correctly, the external USB hard drive (HDD) appears in the control panel but does not seem to be detected in my computer screen. I will certainly help you to question, however, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  (a) what is the brand and model number. the USB HDD?

  (b) has detected before HARD drive in my computer screen? If so, did you do changes on the computer before this problem?

  (c) that you get an unrecognized USB device notification error message?

  The unit is probably go up at the same point one of the partitions and thus becoming "invisible". In

  in order to further diagnose the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows

  
  

  Also, run the next fixit to solve common problems with USB devices.

  Diagnose and automatically fix the Windows USB problems

  If the problem persists, try the following method.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and perform a test to ensure that the problem is solved

  Also, refer to:

  Updated a hardware driver that is not working properly

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• I have PS CC 2014 and 7.3 of Extension Manager installed, but not all extensions appear in PS. All are enabled and up to date versions. For example, Adobe watercolor Deputy. Any suggestions?

  I have PS CC 2014 and 7.3 of Extension Manager installed, but not all extensions appear in PS. All are enabled and up to date versions. For example, Adobe watercolor Deputy. Any suggestions?

  Please see the compatibility on each module table because not all will be compatible with PS CC 2014 and therefore do not list in the extensions under this version of PS Manager.

• need to reconfigure the virtual computer after deployment of the vm

  Hi all

  I have a script to deploy a computer virtual to a CSV file. I need to change the configuration of virtual machine (CPU and memory) after the deployment of the vm. where the name of the virtual machine should be taken to csv. So any help is appreciated.

  Attach the script used. (downloaded and works fine)

  $vms = import-CSV D:\vm-deploy\vm-deploy.csv

  {foreach ($vm to $vms)

  $Template = get-model $vm.template

  $VMHost = get-VMHost $vm.host

  $Datastore = get-data store $vm.datastore

  $OSCustomization = get-OSCustomizationSpec $vm.customization

  New-VM-name $vm.name - OSCustomizationSpec $OSCustomization - VMHost - $VMHost model $Template - $Datastore - Datastore RunAsync

  }

  # This cmd need to run after the vm deployment completed. The virtual computer name must come from the 1 column of the CSV file

  Set-VM $vmname - NumCpu 2 - MemoryGB 5 - confirm: $false

  Write-Host "All VMs deployed" - ForegroundColor Green

  Disconnect-VIServer-confirm: $false

  CSV file looks like this

  Name, host datastore, Template, customizing

  Test-VM,vm-dep-test,ESX02,P5-vm-stage,vm-deploy

  Thanks in advance...

  A simpler, but not optimal, solution is to use the Wait-job cmdlet.

  Something like that

  $vms = import-CSV D:\vm-deploy\vm-deploy.csv

  $tasks = @)

  {foreach ($vm to $vms)

  $Template = get-model $vm.template

  $VMHost = get-VMHost $vm.host

  $Datastore = get-data store $vm.datastore

  $OSCustomization = get-OSCustomizationSpec $vm.customization

  $tasks += new-VM-name $vm.name - OSCustomizationSpec $OSCustomization - model $Template - VMHost $VMHost '

  Data - $Datastore - RunAsync store

  }

  Waiting-task-task $tasks

  {foreach ($vm to $vms)

  $vm.name set-VM - NumCpu 2 - MemoryGB 5 - confirm: $false

  }

• Reload the Configuration of the virtual computer after changing the VMX file

  Hello

  If I make changes to a file on a virtual machine's .vmx in vCenter 5.5 is automatically valid configuration for the engine power vm off? I made some changes earlier and it seemed to be the case, but one of the steps that I see in some of the documents is to reload the configuration of the vm, so it can be used appropriately. So this happens automatically or not?

  Hello

  If she turned off the virtual computer, then during power on, changes to take effect.

  Concerning

  Mohammed

• Move-vm can migrate a powered off the virtual computer to a DRS cluster?

  When I try to move-vm has propelled off VM to a destination of DRS cluster, he says that he cannot migrate a powered off the virtual computer to a DRS cluster.   I can explicitly name the destination of the host and it works, but that defeats the purpose of using the DRS and forces me to script on the destination hosts.

  I do something wrong or I would be able to migrate a powered off the virtual computer to a DRS cluster?

  Thank you

  -MattG

  Hello, MattG-

  I get the same behavior as you when you try to move a VM PoweredOff to a DRS cluster, specifying the cluster as the value for the parameter - Destination to Move-VM (using PowerCLI v5.1 Rel 2 v5.5 Rel 1).  Not quite what I expected.

  To work around the problem, and without having to appoint a particular host as destination, you could use some Get-Random, do something like:

  Move-VM myVM0 -Destination (Get-Cluster myDestDRSCluster | Get-VMHost | ?{$_.State -eq "Connected"} | Get-Random) -RunAsync
  

  Who should receive the machine said cluster and on a host that is in the connected state.  A subsequent operation to the market (whenever do you eventually) should then see DRS power on the virtual machine on a suitable host in the cluster.

  Maybe the dev team can comment if this behavior is the expected or desired.

  Anyway, how does do for you?

• How can I type of NETWORK adapter in the virtual computer a vCloud?

  I'm trying to write a script that compares the type of NETWORK card in vCloud NIC type in vCenter to work around a bug in vCloud 1.5.  I can get the type of NETWORK adapter in the virtual computer a vCenter by getting the vCenter VM up and running:

  
  

  $vcvm | Get-NetworkAdapter | FT-auto
  Name Type NetworkName MacAddress WakeOnLanEnabled
  ----              ----           ----------- ----------        ----------------
  Network adapter 1 isolated EnhancedVmxnet 00:50:56:01:00:33 True

  
  

  I do not get the same results when you perform an action similar to vCloud:
  $vcdvm | Get-CINetworkAdapter
  
  
  Connected primary index IPAddressAllocation IPAddress ExternalIPAddress VM
  ----- ------- ---------  ------------------- ---------       ----------------- --
  0 true true manual 192.168.10.30 nic1
  
  
  I can get all the other info NIC, such as the network, IP, MAC, etc, but not the type:
  ($vcdvm. ExtensionData.section) [2] .networkconnection
  
  
  Network: isolated
  NeedsCustomization: false
  NetworkConnectionIndex: 0
  IP address: 192.168.10.30
  ExternalIpAddress:
  IsConnected: true
  MACAddress: 00:50:56:01:00:33
  IpAddressAllocationMode: MANUAL
  Get_anyattr:
  VCloudExtension:

  For the moment, I get the type of NIC the vCloud himself database vCloud.  Thanks for any help.

  I use VMware vSphere PowerCLI 5.1 Release 1 build 793510

  I could tell you where to find it, but there is a bug in the API that shows only as PCNET32 anyway (sleep if she could be VMXNET3). Keep doing what you're doing with the database query.

  See you soon,.

  Jake

• Best method to deploy the virtual computer

  Anyone who can tell me what is the best way to deploy the virtual computer deploy of the FVO or models (the VM creation) that create the virtual machine of the templated took longer time compare to the creation of the FVO. Any Suggestions?

  Deploying the model customizze the new machine as part of the deployment will treat you while FVO will be an exact xopy, so you need to manually configure the new machine.

• Strange problem after moving from the virtual computer to a new data store

  I am migrating our VM existing (8 in total) a 'problem' RAID to a new table on a new controller and am having a strange problem. Here are the steps I took (host OS is Ubuntu 8.0.4 LTS x 64):

  (1) off the power the virtual computer from the Web interface

  (2) the directories created for each virtual on the new RAID array computer (in this case a RAID 10 array on LSI 9750-8i controller)

  (3) rSync used to copy the data from RAID1 to be RAID2

  4) has created a new data store on the new RAID through the Web Server of VMWare user interface.

  (5) removed VM of the inventory through the Web, their return, added user interface then choose files .vmx on new data store on RAID2

  They have all power save fine... but three of them are not accessible on the network. I can open a console in the Web Server of VMWare user interface and they all run normally... but I can't their ping or access the respective virtual machine Web GUI. It seems quite arbitrary that those who work and those who are not. In this case... the VM that don't work is a license Autodesk, a Squid proxy server and a VM of cactus. All three of these virtual machines are 32-bit Ubuntu Server VM (two 8.0.4 and a 10.0.4)... and are the only Ubuntu VM on this host. It must be signifigant but I'm not see how.

  If I delete these three virtual machines of the inventory again and add to their original location (on the RAID1) they light up AND work normally. A consultant that we were working seemed surprised, as he had also done this experiment with some of the older VMWare products. I don't see how it would be the physical location of the files of the virtual machine. Any ideas?

  We rely on the migration to ESXi soon but in the meantime, we get these a few VM out of this RAID array problem. I'm stuck.

  Depending on the application, it may be enough to reconfigure the IP parameters (they are very probably on DHCP now) for the newly detected virtual NIC.

  André

• Script to rename the virtual computer by name DNS listed in VC

  I am very new to powershell, and I tried to understand this by using pieces of code I found, but nothing helped.

  I'm looking for a script to take the given DNS host name for a virtual machine listed in VCenter and rename the virtual computer.

  For example.

  Host01VM01 (as shown in Vcenter) - the DNS name of the "something.xyz.com".   VM and rename it "something.xyz.com" in Vcenter.

  To run the script only for a group called "Mycluster" you can do:

  Get-Cluster "My Cluster" | Get-VM | `
  Where-Object { $_.Guest.HostName } | `
  ForEach-Object { Set-VM -VM $_ -Name $_.Guest.HostName -Confirm:$false }
  

  This script will only work for VMS that have installed VMware tools and probably only for VM which are turned on.

• Need to include the hardware version of the virtual computer in 'standard' VMReport.ps1 in Excel...

  Need to include the hardware version of the virtual computer in 'standard' VMReport.ps1 in Excel...

  Notice-EEG - viewtype virtualmachine. Select Name, @{N = "HardwareVersion"; E = {'Version $($_.) Config.Version)"}}

  I above for the hardware version of vm, but I need to include in a report 'necessary' as 'necessary '.

  The script of VMReport.ps1 previously published works for all requirements except the hardware version of the virtual machine. I tried to 'embed' the syntax get-view without success.

  Any suggestions on how to get the VM hardware version (and the name of vm State, OS, CPU, IPAddress, host) in an excel spreadsheet?

  I have VDuc script is modified for the rest no problem.

  All points will be awarded as usual.

  Hello

  You can try below also extracts

  $report = @()
  
  Get-VM | %{
      $row = "" | Select VMName, State, OS,  Host, CPU, IPAddress, HWVersion
       $Ver = $_|get-view
       $vmGuest = $_ | Get-VMGuest
       $row.VMname = $_.Name
       $row.HWVersion= $Ver.Config.Version
       $row.IPAddress = $vmGuest.IPAddress[0]
       $row.Host = $_.Host.Name
       $row.OS = $_.Guest.OSFullName
       $row.State = $_.PowerState
       $row.CPU = $_.numcpu
       $report += $row
  }
  $report | Export-CSV c:\VMReportTest1.csv
  

  I hope this helps.

• Get the IP address of the virtual computer? (when no DNS available)

  I have a strange setup where I have a server vCenter runs in a private network that has no DNS available IN-HOUSE.  I am running the scripts that query an IP address range, but takes forever to run.  I can run get - vm and get all virtual machines, but can't do anything with them because there is no DNS and I can't find a way to enter the IP address of the virtual computer.  If I could get the IP addresses I could then run functions against them.  If it makes a difference those VMS have two network cards: Public and private.  Any ideas?

  The Get - VM cmdlet returns the IP addresses to the title of Guest.IPAddress count of the first IP address use as well:

  Get-VM |Where {$_.PowerState -eq "PoweredOn" } |foreach { Write "$($_.Name) has an IPAddress of $($_.Guest.IPAddress[0])" }
  

  If you found this information useful, please consider the allocation of points for correct or helpful.

  Alan Renouf

  http://Virtu-al.NET

• Through host SCSI tape drive to the virtual computer with the backup software installed in the comments

  Can I attach an external SCSI tape drive to one of my hosts, and then add it as a device in a virtual machine.

  I want to use backup exec on a virtual machine, rather than having to have a separate physical server to attach the tape drive. I realize that I wouln't be able to vmotion the guest but as its only going to be a backup machine I am happy with that.

  Thanks in advance,

  Yes is possible.

  I have a Dell TL2000 with a dedicated SAS card and it works (not faster than in a real environment, but works).

  You add the SCSI ID of the tape (and the library, if any) to the virtual machine.

  Or, if your hardware can he take charge, using VMDirectPath and give the card on the virtual computer.

  André

• After the Virtual Machine is hot migrated lose the reference to the virtual computer object (VMware.Vim.VirtualMachine)

  Hello

  In my VB.Net application, I retrieve the virtual computer object (VMware.Vim.VirtualMachine) through scripting Powershell VI.

  If the Virtual Machine is migrated to another host (hotmigrate) I receive an event (VMware.Vim.VmMigratedEvent), which also holds the moref of the Virtual Machine. I tried to use the updateview method to refresh the virtual computer object but failed with an error message stating that the object could not be found, or never existed.

  I also tried to recover the virtual computer object again, throug the method Client.GetView and the moref returned by the event, but the same error message.

  How can I get my hands on the virtual computer object or update after migration to another host takes place. I have to get it back again? It would be great if I could do it somhow with information from moref I hold the event!

  Any help is appreciated!

  Concerning

  Manfred

  Sorry, but I can only show you how to do this in PowerShell.

  I use the purpose of the task to get to the prompt MoRef.

  Here's how:

  $vmName = 
  $tgtHost = 
  $tgtPool = 
  
  $vm = Get-VM $vmName | Get-View
  $poolMoRef = (Get-ResourcePool $tgtPool | Get-View).MoRef
  $esxMoRef = (Get-VMHost $tgtHost | Get-View).MoRef
  
  $task= Get-View ($vm.MigrateVM_Task($poolMoRef, $esxMoRef, "lowPriority", "poweredOn"))
  
  while($task.Info.State -eq "running" -or $task.Info.State -eq "queuing"){
    $task.UpdateViewData()
  }
  
  $vmImpl = Get-VIObjectByVIView -MORef $task.Info.Entity
  

  I don't know how you get at the VmMigratedEvent event, but the MoRef in there is pointing to the correct prompt.

  In the following script, I extracted all the events related to the task of vMigrate immediately after the vMigrate task finished

  function Print-VmName{
       param($event)
  
       $MoRef = New-Object VMware.Vim.ManagedObjectReference
       $MoRef.Type = $event.vm.vm.type
       $MoRef.Value = $event.vm.vm.Value
       $vm = Get-View $MoRef
       Write-Host $vm.Name
  }
  
  $events = Get-VIEvent -Start (Get-Date).addminutes(-15)
  $events | % {
       $event = $_
       $eventType = $_.GetType().Name
       switch ($eventType){
            "VmMigratedEvent" {
                 $eventType
                 Print-VmName $event
            }
            "VmEmigratingEvent"{
                 $eventType
                 Print-VmName $event
            }
            "VmBeingHotMigratedEvent" {
                 $eventType
                 Print-VmName $event
            }
            "TaskEvent" {
                 $eventType
                 Print-VmName $event
            }
       }
  }
  

• Had an error "NTLDR is missing" while restarting the virtual computer

  Hi all

  I got an error "NTLDR is missing" while restarting the virtual computer on which windows is running.

  Can someone please suggest a way out of this error?

  Thank you

  Jenish

  You have a connected to the virtual machine floppy image? If so, disconnect the diskette drive.