Had an error "NTLDR is missing" while restarting the virtual computer

Similar Questions

• Restart the virtual computer through esx command

  Hi guys,.

  How to restart the virtual machine via control esx

  Thank you

  Vinoth.S

  Hello

  Have a look here:

  http://www.esxguide.com/ESX/content/view/2/25/

  To list all virtual machines is "-l".

  Hope that helps.

  Dan

• Error NET HELPMSG 3521 while checking the Update Service was stopped and the error code "8024000".

  Original title: error NET HELPMSG 3521 while checking the Update Service was stopped.

  Windows Vista. 32-bit, SP1 and 2

  Long story short, I tried to fix my problem of update windows since the beginning of July 2011.  My computer does not stop when you install updates automatically or manually.  I got a 8024000 error.  A shot an email to Ms support and I received an email quickly with some procedures to do.  I don't have to make these 4 days later.  Here is the part of the email.

  This problem may be caused by the following factors:

  1. the Windows Update service has stopped.

  2 corrupt Windows Update temporary files.

  3. bad Internet connection settings.

  4 corrupted DLL files.

  Step 1: Check the services concerned of the update of Windows

  1. click on the button 'Start' in the 'Search' bar type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. double-click on the service "Windows Update".

  3. click on the 'general' tab. Make sure the "Startup Type" is "Automatic" or "manual". Then please click the button "Start" under "Status of Service" to start the service.

  4. repeat the above steps with the Background Intelligent Transfer Service (BITS).

  I completed this step.

  Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update

  1. close all open windows.

  2. click on the "Start" button, click "All programs" and click on "Accessories".

  3. right click on "Command prompt" and click "run as Administrator".

  4. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.

  Make sure it is said that he has been arrested with success.  OK, it worked.

  5. click on the button 'Start' in the 'Search' box type "%windir%" (without the quotes) and press ENTER.

  6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

  7. right click on the folder, select Rename, and type "SDold" (without the quotes) to rename this folder.

  8. while still in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates

  It did not work.  I received a message...

  The syntax of the command is

  NET [accounts: computer: config: continue: file: Group: help: helpmsg: localgroup: pause: print: session: share: start: statistics: stop: time: use: user: view]

  C:\Windows\System32>_

  I tried again from the beginning and now get the following error: NET HELPMSG 3521

  "MS supports has not returned my emails to the technology or the Manager.

  Can someone help me?  Please notify.  Suzzz-Q

  There are many other measures that followed the foregoing.  If anyone is interested in reading all of this...

  Step 3: Component of Windows Update registry

  ============================

  1. click on the "Start" button, click "All programs" and click on "Accessories".

  2. right click on "Command prompt" and click "run as Administrator". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Enter the following command and press ENTER.

  REGSVR32 WUAUENG. DLL

  You will get a window "DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  4. then please proceed to enter the following commands one by one. A success notification is received after each command.

  REGSVR32 WUAPI. DLL

  REGSVR32 ATL. DLL

  REGSVR32 WUCLTUX. DLL

  REGSVR32 STINKS. DLL

  REGSVR32 WUPS2. DLL

  REGSVR32 WUWEBV. DLL

  If please test the issue again and let me know the result. If the problem persists, I'll help you check your Internet connection in our next communication. To clarify the issue and provide more specific troubleshooting steps, please help me to collect the following information.

  How to capture a screenshot

  ======================

  1. press the button print screen (print screen) on your keyboard.

  2. click on the "Start" button, type "mspaint" in the search bar and press ENTER.

  3. in the Paint program, click on the "Edit" menu, click "Paste". Click on the "File" menu, and then click "Save".

  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box"Save as type", click on"Desktop"in the left pane and then click on"Save ".

  Please send this JPEG file to my e-mail account to * address email is removed from the privacy *.

  How to retrieve system information

  =============================

  System information can provide us with more information about the current state of the system. I would check for you. Please send it to me using the following steps:

  1. click on the "Start" button, type "MSINFO32" in the search bar and press ENTER to start System Information.

  2. on the pop-up window, in the menu bar, click on 'File' and click on 'Save', type a file name and choose NFO as "Save as type", click on "Desktop" in the left pane and click Save.

  Please send it as an attachment to * address email is removed from the privacy *. If the file is too large to be sent, please right-click on the exported file, choose "send to"-> "Compressed file (zipped)" and then send the zip file for * address email is removed from the privacy * for further research.

  How to recover the WindowsUpdate.log file

  ================================

  1. click on the "Start" button, type "WindowsUpdate.log" (without the quotes) in the search bar and press ENTER. We will see a file named "WindowsUpdate.log".

  2. now click on the 'File' menu and click on the "save under".

  3. in the left pane, click "Desktop" and click the "Save" button.

  Hello

  Instead of all of the previous steps, you can just try the steps as shown in these methods and check if these help.

  Method 1:

  To resolve the error 8024000 follow the steps in the link and check if it helps.

  Windows Update error 8024000

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-8024000B

  Method 2:

  See also article on the resolution of the problems with the installation of updates and check if this may help:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  original title: Setup error.

  I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  Please make sure you have finished any previous Setup and closed other applications. If the error persists, please contact your dealer.

  I solve the problem... All the error is the file. I don't know but he corrupted and I deleted it.

  I have download it again and the problem was solved. Thanks to you all.

• My mac had to be repaired several times and eventually I was forced to restart the entire computer, wiping everything.

  My mac had to be repaired several times and eventually I was forced to restart the entire computer, wiping everything. I registered my purchase CS6 Design Standard of two years, so I have the serial number, but I don't have the record of the initial purchase. How do we install CS6 on my practically new Mac?

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  ADDITION to previous versions http://www.adobe.com/downloads/other-downloads.html can help

• Is reset or restart the virtual machine should all expanding vmdk size?

  Hi all

  While extending the size of 20 to 28 GB GB vmdk I can extend when the VM is in poweron State, but he didn't think inside the virtual machine. The disc is resized when the virtual machine won reset or reboot.  I would like to know if the reset or restart that virtual computer is must have for resizing vmdk. If it is then what is the use of expansion of disk while the VM is in poweron State?

  Thank you

  Vijaya

  Yes with windows 2008, you can extend the OS disk to create a new drive letter instead.

  Here is a tutorial: http://www.petri.co.il/extend-disk-partition-vista-windows-server-2008.htm

• Monitoring VM - how to restart the virtual machine

  Hi all

  Hit a problem in our environment that can not be solved, but wanted to tender hand to people and see if they have found a way to replace.

  Currently have followed vm enabled in our cluster. Thing is watching us to restart the virtual machine VMware tools demonstrated to a status of "not running" - now, the key is to most of the definitions, the system is available in this case, can be crazy, RDP'ed etc, but we here again them restarted as he finally solves the issue we see (for example unable to connect via citrix for the machines in question)

  Duncan in the post below highlights in order to avoid false positives any i/o to storage/network activity will be verified after that heatbeats failed to "double check" there is a problem with the virtual machine

  Favorite VM monitoring (aka VM HA) - yellow bricks

  What I asked is it possible to replace verification of network storage/IO activity and then restart the virtual machine VMware tools on them stops as soon as?

  Many tx for all thoughts

  «.. . is there a way to replace check network activity of storage/IO and then restart the virtual machine of VMware tools on them stops as soon as...? »

  You can always use a supervision-process inside the virtual machine for this tool (perhaps more followed VM). It acts independently and allows much finer control, i.e. it can try first (re) start vm-tools before restarting. Same BSOD /-kernel panic can be dealt with by VM itself. It can actually be even more robust, not dependent on VMware infrastructure.

• HA restarts the virtual machine if the storage connectivity is lost? If how is HA needs to be configured?

  We plan to go forward with a single dual-port HBA in each of our ESX servers. My concern is that the HBA becomes a single point of failure. HA supports restarting the virtual machine which lose connectivity to back-end storage. We did some testing and it does not appear that HA does not handle this. Even when 'enable us VM monitoring' the machine virtual do not restart on other ESX servers in the cluster that they hang just basically. I've read a few articles which seem to indicate that it should work, but I'm not able to get there. Any thoughts there?

  HA checks the availability of default ESX host. There is an option to monitor the heartbeats reviews, as well. Maybe this will do, but sometimes a guest still works for awhile even if the disk is lost. And as for a long time VMware tools send heartbeats...

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Is it possible I can get the virtual computer connectivity after restart to connect to the local network in the host operating system?

  Hi all

  For some reason, I have to disable and then enable the LAN connection in the host operating system. If some virtual machines are running during this time, connectivity all VMs for out-of-world are lost, they cannot connect to the host even more (by running the ping command). I tried a few methods to retrieve the connectivity, but all have failed, for example,

  1. reboot the virtual computer

  2. restart VMware Workstation

  3. restart the corresponding system services in the host operating system

  The only way I can retrieve all is to restart the host operating system itself.

  Yes, is there short any path, I can retrieve the connectivity of these virtual machines?

  Thanks in advance.

  Yark

  yarkwang wrote:

  I use a Broadcom NetLink (TM) Gigabit Ethernet NIC, shows the date of the pilot 2006-5-15, but it works well, I think.

  Try installing a newer driver.  According to the site, you should be able to find a driver dated 2008 or 2007 (depending on which exact model of NetLink card you have):

  - http://www.broadcom.com/support/ethernet_nic/downloaddrivers.php

  1 came out of safe guard 360

  Sometimes out of some firewall programs is not enough (they keep still themselves installed in the network of the host stack, even if they are 'closed').  You may need to uninstall to make sure that it is not interfere.  (Search the forums for support for your firewall software see if anyone else is having problems with vmware and 360 safe guard).

• How to restart a virtual computer when it blue screens

  Someone at - it an entries if there is no options in ESX 3.5 that is OS (Windows 2003) blue screened, it will restart it self?

  I know that in HP, there is a function if the OS is not accessible, it will automatically restart. Is there a similar function in ESX? I have some server that just blue screen and uses a lot of resources when he stuck on the blue screen.

  Thanks in advance.

  If you have virtual Center, you can set an alarm on the loss of pulse to restart the virtual machine - VM

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Error NTLDR is missing - press ctrl alt del to restart

  Hello

  I am extremely embarrassed to admit the following and ridiculously angry at myself for doing something completely stupid as I did, but's done it now... sigh...

  I have NTLDR is missing - press ctrl alt del to restart error of nightmare.

  This is how it happened. I need (ed) to reformat my hard drive, but first I was going to save everything. I save every so often, that now, I'm not near as often as I should! (last to the top was sigh 21/05/07). Well, not to think, instead of backup, I put the recovery cd in the drive and the screen came up saying: "loading ramdisk" then I got to the next screen basically asking if I wanted to restore out of the box or not. I chose the first step of the wizard who said out of the box. Then I clicked NEXT and realized that I had not backed up my files! So I cancelled out of the restore cd Wizard.

  When I rebooted the computer, I got the error above nightmare.

  I did research for many, many hours on how to repair or at least be able to start windows. I did the following:

  1 creates a disk with ntldr, ntdetect.com, and boot.ini boot disk on it to restore, I all but I don't know if the dates say anything on those downloaded from another laptop

  It did not work I still came upward with the same error or some other errors one pointing to hal\something. I don't know if it's my boot.ini that causes the problem or what. Oh, by the way, I went into the BIOS and made sure the computer started up to FDD first when you try the floppy option.

  [boot loader]
  timeout = 30
  default = multi (0) disk (0)

  Hello

  It s a delicate and stupid situation.
  The simplest solution would be the formatting of HARD drive and new reinstallation of the operating system.

  But it seems you want to save all files available on the HARD disk.
  If all goes well it s not too late

  Hmmm. I think you have only one chance! You must remove the drive HARD internal of the laptop and try to connect it to the computer second external USB controller!
  This part is not expensive and can be ordered from each book.
  You should be able to get access to the HARD drive removed from the laptop...

  After this procedure, the HARD drive must be formatted as NTFS, and any partition must be deleted!
  Then you should try to start from the windows installation procedure or the restore CD.

  By the way; I study a little bit in the Microsoft database and found these two documents:
  http://support.Microsoft.com/kb/318728
  http://support.Microsoft.com/kb/314057

  Maybe some advice described in these documents may be useful.

  Good luck

• Error - NTLDR is missing from the Windows XP computer.

  Original title: difficulty ntldr missing.

  I don't have xp recovery disk. I get lack ntldr message at startup. How can I fix wihout disc?

  Since the MS Answers forum does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.  What makes which gives good ideas for extremely difficult solution.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

  You can create a bootable CD from the Console of the Recovery XP (no XP media required) and start the XP Recovery Console.

  The chances are pretty good that there is a copy of the NTLDR file on your system to another location, so you can replace the missing file.

  The file is supposed to be like c:\ntldr c:\ root folder (note there is no file for the ntldr file extension) but of course your seems to have developed missing.

  If your system is preinstalled with XP there is probably a folder c:\i386 on your system and that there should be a copy of the file in folder c:\i386 NTLDR.

  If you have installed Service Pack 3 download Internet via the World Wide Web Wide, there will be a copy of the NTLDR file in this folder:

  c:\Windows\ServicepackFiles\i386

  Once you get started the recovery console and you ran chkdsk/r, I would see if these commands will work for you to replace the missing file:

  copy c:\i386\ntldr c:\

  or

  copy c:\windows\servicepackfiles\i386\ntldr c:\

  Here's how to make a CD of bootable XP Recovery Console and I would run the chkdsk /r FIRST to make sure that your file system is not damaged.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

• Looking for a recovery CD for Compaq Presario V3136TU? Technical error: NTLDR is missing

  I formatted my Compaq Presario V3136TU 2 days ago and has discovered just when I run the 2nd recovery CD, there is an error message that some files cannot be read. After completion, my laptop won't boot any more completely.

  NTLDR is missing
  Press Ctrl + Alt + Delete to restart.

  I have tried a few attempts.

  1 browser through all the HP site and emails of support no answer me have so far so I give up on their e-mail.

  2 find the Web site to install depending on the operating system, but when I try to install Windows XP, it says hard drive cannot be detected.

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3289312&lc=en&cc=us&dlc=en&lang=en&cc=us...»

  If anyone has an idea about this, please advise.

  3. then I find a site that allows you to download.
  http://www.user-guides.co.UK/cddownload/HP/HPCompaq/HP-Compaq-Presario-V3000Z-Ntldr-Boot-CD-disk-98-...

  Have someone tried this site, I'm abit worried if it's reliable?

  4. I called the technical service of HP, and technical personnel will only direct me to call the hotline (1800-272-5333) and to order the recovery CD, the price is SGD $50.00, more min 3 days and car collection.

  I'm really very sad with the HP service.

  If anyone have a Compaq Presario V3136TU, PM me please.

  Thank you very much

  If the above mentioned fixmbr is not work_You may need to remove this extra partition. Boot with the XP cd and go through a fresh install, delete both partitions and let XP to create a new installation to.

• Error "NTLDR is missing" in the Windows XP computer.

  Origianl title: htldr__

  I have windows xp. on startup, I get the error message "htldr is missing". Help, please

  Hiseanwallace,

  You did it all change hardware or software on your machine before this problem?

  You can follow this link & check if you are able to boot to the desktop.

  Windows may not start and you may receive an error message "NTLDR is missing" If Windows is not up-to-date and there are too many files in the root folder

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• NTLDR is missing after using the recovery disc - Satellite A100-493

  Hello

  I come from Germany and I have a Toshiba Satellite Notebook, which I bought new in 2006.

  After nearly three years, he started showing problems and slow, so I backed up my files and inserted the "Product recovery" CD that came with the laptop. I followed the Instructions and it began to unwind. After that about 1%, it displays a short Error Message, which I was not able to write down again and stops.

  When I restart the computer says ist «NTLDR is missing, press Ctrl + Alt + Delete to restart» When I do that it shows me the same "NTLDR is missing" Message, no matter how many times I reboot the thing.

  I tried to redo the whole fotmatting, but it always comes out the same way. What di - I do?

  G Demolidor

  It's very strange. If the recovery disk is not damaged the only reason for interruption of the installation may be faulty HARD drive or some problem there.
  If possible, try to get Microsoft WXP CD facilities and try to install Windows XP Home edition.

  Please let us know if the installation completes without any problems.