HP dv4-2110tu power on no display, the hat and the num led 3 flashes

Similar Questions

• How to display the window test animation Flash CS 6 smaller?

  I use AIR for iOS and the scene is 1152 x 1536, whenever I have test the movie, that it seems in full resolution and it is difficult to see everything. How can I make the window test movie appear smaller when I press Ctrl + Enter (test movie). Thank you.

  You can make the window smaller by dragging to change its position and then clicking on file/close.  then re - test.

  You can click on view/Zoom to allow the view/zoom out to see the full stage in the small window.

• How can I display the current time in larger font when I need a look at it?

  Before I updated to iOS 10, I was able to double press the home button and the display shows the current time. Is it possible to do it now? I am sometimes in low light conditions and can not do the smaller font at the top. Thank you

  By clicking on the bottom of the power (sleep/wake) displays the screen you want. In fact, in iOS 10, the figures of the time are still larger than in iOS 9.

• Satellite L755 - suddenly then turn off blinking of power and the battery LEDs

  In recent weeks, when using the laptop (Satellite L755 psk2ye) he died suddenly and the power and the battery leds start flashing simultaneously.

  It also takes place when charging the battery when the unit is off... then l must cut off the power and he'll be back... Although the problem sometimes occurs again after a few minutes hours or does not...

  Remove the battery and check if the same problem occur when you use laptops with power running.

  Please post comments.

• Cannot display the power/battery gauge

  I can't gauge to see how much battery life left my computer. I went to control panel > everything on the control panel > notification area icons and it is set to "Show icon and notifications", but he said that "this notification icon is not active. How can I solve this problem?

  I have a lenovo and use windows 7.

  He has always displayed the life gauge power/battery until a few days ago he ceased to display.

  Thank you

  

  This little yellow box said "some settings are managed by your system administrator.  If you don't have anyone given access administrator (full control) on your computer, then you will be wiser to do the following immediately:

  (1) create a new profile of admin only for yourself.

  (2) open the C:\Users folder and move your files to the new user folder.

  (3) remove the compromised administrator account.

  (4) run a full scan virus and security.

• The battery status icon does not display the symbol of the AC power cord when the laptop is running on the current and recharge

  I have a Compaq presario with Windows 7 Home Premium 64-bit. A few years after an update of Windows, the status of battery in the systray ICON ceased to display the amount of time left on the battery and it stopped display the symbol of the AC power cord when it was being turned off of the AC adapter.  If I remove the battery, then the cord appears.  Put it back in the slot and the rope faints and I have the same shape of rectangle get you if the computer is running on battery only.  Any ideas how I can get the cord to display when AC power feeds the laptop.

  The accumulator is recharged, but there is no busy indication, apart from the height of solid white fill.

  Hi Graeme,

  Thanks again for the update.

  Laptop computer should turn on without the battery when it is connected directly to the power source. As Techgod said it could be a hardware problem, it is possible that the problem is with the battery.

  I suggest you to contact the manufacturer of the laptop to get help.

  Compaq support
  http://www.Compaq.com/CPQ-country/cpq_support.html

  Thank you

• Error! The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine

  Why when I try install Mac Os Yosemite in VMwareplayer when the virtual machine starts, I get this error:

  The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine

  I have an AMD A10 processor

  VMware does not support the operation of Mac OS X in VMware Player/workstation!  Also, legally virtualisables versions of OS X running in a Virtual Machine can be done when done in the Apple brand hardware but when done while running under OS X, and for that, you need VMware Fusion not VMware Player/Workstation (or use ESX/ESXi on Apple brand hardware) you violate Apple's SLA for this product.  So any help can you provided for OS X in this use of the scenarios that it would violate the community VMware operating conditions to do.

• iOS 10 - How do I get the clock to display the seconds?

  Recently updated my iPhone iOS 10.0.1 6s.

  After a power failure, I was re-creation of different clocks and discovered that the "Clock" Apple app displays more seconds in the "WorldClock" pane In addition, I can't change for the clock faces 'analog-style' in this application. The application icon has a small second hand in the home screen, but it's pretty hard to use when you try to put clocks in the second. Any thoughts?

  As far as I know, the clock of the world cannot do that, which is a pity. I wonder why they decided to remove it. Perhaps he used too much energy to the battery?

  Thank you for pointing out that the application icon displays the seconds hand, I never noticed that before.

  It is discussed by the Parliament, but the only solution which they suggest is to get an application:

  in the new iso standard 10 analog world clock update?

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• Satellite M40: Where the graphical utility to display the WLan?

  I got the Satellite M40 system after some disk problems, but then I couldn't find the graphical tool displays networks wireless in the vicinity.

  I searched among the drivers in the support page, but there is nothing that I could use. I would appreciate if someone had a direction where search - I don't know the name.

  I also have the original Toshiba recovery disks.

  Hello

  For WLAN and WIFI configuration you can use the Windows settings. In this case, under connection WLAN properties, you will find an option called display the icon in the tray... when it is connected you can see a small symbol shows the power of the signal.

  While you can do if you use the Intel wireless client. If you n t have one that I recommend you visit the Toshiba WLAN website under http://aps.toshiba-tro.de/wlan/

  You can find the most recent driver for your WLAN card including customer Intel wireless that allows you full control of your home network. Install this client and you'll get what you want.

  Good bye

• Display the battery percentage in the notification on my Moto G4 more bar?

  Hello.

  How do I display the battery percentage in the notification bar?

  Moto G4 more, Android 6.0.1.

  Thanks in advance.

  Touch and hold for a few seconds, the gear icon that appears on the top of the notification Panel (to the right of the battery power indicator)

  You'll get what you need after having followed the steps above and then visit the 'UI Tuner system'.

• Link to information from tables and display the 'best '.

  Hello! I'm totally new to this great software, and the truth is that I lost D:
   
  I try to explain in more detail what I have to do, I hope you can help me please it is urgent T_T

  I do 3 tables must be related to each other, that is to say a table where a username will be manually enter, another where you manually enter the user name and the third which will automatically enter power of each user (for automatic writing, I'll use random data). Each table will have a box number, for example:
   
  Table 1, box 1: Paul
  Table 2, box 1: door
  Table 3, box 1: 3.74
   
  Table 1, box 2: Miguel
  Table 2, box 2: Ramos
  Table 3, zone 2: 4.99
   
  Table 1, box 3: Maelle
  Table 2, area 3: Branco
  Table 3, case 3: 4.98
   
  I mean, I bind the box to one table with the other three. And because the program must compare the data in table 3 (power) and display the data of the user of best (which has the highest power). In this example, the program should appear:
   
  BEST USER:
  NAME: MIGUEL RAMOS
  POWER: 4.99

  (Is not slender record information when I close the program)

  I don't know if I ask you very much, I have a very clear idea in my head of what I have to do, but being a new software for my not know how to implement it.

  Thank you in advance for your quick response and help and ilustrative! xD

  Have you tried something with the basic understanding of your question check if this is what you need?

  -Still not clear what you mean by table? (In my opinion, the table is 2d array of values here, otherwise please let me know.)

  -C' is the reason why I asked you to show your code you did then it will be clearer.

• Dv4-1120us bricked by update of the HP Bios

  Frédérique put I went to update the bios on my laptop as I previously without incident.  Well this time the update downloaded, installed and turned off Windows Vista 64-bit SP1.  After that nothing! The lights of power will light up, but that's all.  No HP, no MSFT screen no screen no nothing.  Honestly, I think that it is a bios update due to the update of the HP. It's the update, I installed: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67379-1&lc=en&dlc=en&cc=us&...   Long story short HP support chat session has been very helpful and I will send a box to air next day prepaid to ship at his own expense to solve this problem.  Comments are welcome, but I highly recommend anyone with this laptop not to install this update! I have taken out the battery, dethroned the ram and others without any result.  I hope they can fix.

  LordVader311
  "The power of the dark side!

  lordvader311, many of us brick already our dv4s with the last update of the bios HP but you can fix it yourself in a few minutes as follows

  BTW, the credit for this goes to PONGSTER who told us all that...

  Change Note:

  I edited the steps for the dv4-1140GO users. Moreover, the 1125nr, 1140go and the CQ45 seem to share the same room, as they use the exact same application BIOS flashing.  This bodes well for those of you who need to get theire fixed dv4, instead of send for repairs.  Don't forget, if you missed your BIOS, sending in for repairs is not the only solution, I discovered, after searching for all possible solutions.  Do the following before you send anything in repairs

  I have a dv4-1125nr.  I'm not sure this will help, but you may as well try it before your sending for repair.  I have corrected my messed up BIOS update by following the exact steps, I'll describe here.  There is hope, and you don't need to have your motherboard replaced.  Just follow the instructions and you should be typing on your dv4 in no time.  It took me about 10 minutes, senior, to get all this fact.

  Here we go:

  Good... Here are the exact steps I took to get my dv4 back in working order after a failed update BIOS using HPbuggy update (I just had to repeat what we already know... ) I simply cut and paste of 0,0 steps, so all credit goes to him and the engineering on this forum (http://forum.notebookreview.com/showthread.php?t=340079&page=3) (Bigozone) Acer section

  Here's the exact model number and general specifications: dv4-1125nr, Intel Integrated Graphics 4500, blah-blah-blah-blah (all I had to determine was update the BIOS was necessary for my dv4 with integrated... graphics card later)

  1. go to this site: http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2100&lc=en&dlc=en&cc=us&lang=en&product=3795301 and download the file: ftp://ftp.hp.com/pub/softpaq/sp41501-42000/sp41969.exe

  2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

  3. I used a 128 MB USB Thumbdrive (the smallest I could find, because they said the smaller the better ) and reformatted as FAT (by default) in Vista by clicking with the right button on the drive and clicking on "format".

  4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

  5. If you have the graphics card Intel integrated like me, copy the 30F7F24U. FD to the key USB and RENAME the file 30F7F24U. FD to 30F7. BIN

  NOTE: the file 30F7F24U. FD is for those who have the Intel 4500 integrated video, while 30F7F24D. FD is for those who have the Nvida graphics.

  Copy the appropriate file on the USB key, and then on the USB, rename it to 30F7. BIN

  The next steps are to 0,0 exact steps, which I simply numbered him: (please follow the correct procedures here and 5 minutes from now, you'll be typing a response to this post on your currently borked dv4 )

  6 unplug the adapter from the laptop.

  7 remove the battery from the laptop.

  8 insert the USB key into one of the USB ports on the laptop.
  Does not seem to matter which.

  9. press the 'Windows' key and the 'B' key

  10. connected to the power adapter.

  11 press the 'Power' button on the laptop.

  12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

  13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
  The number of beeps varied, depending on what size of the key USB has been and
  the number of files on the USB key, a single beep for many.
  If the file was not found, the laptop will restart and try again.

  14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

  15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

  16. about 5 seconds after the ringtone had stopped off the laptop computer.
  BIOS worked normally thereafter.

  My last step:

  17. dance of joy! Hehehe these instructions should be on the HP site, since they do not seem to bother to test the updates they push users (here I go again!)

  Hope this helps all of us (it will help me when I mess up my BIOS Flash... hehehe)

  Message edited by DJK on 01/13/2009 17:32

• In HP DV4-2100 back content will make the frame of the screen.

  In HP DV4-2100 back content will make the frame of the screen. The content is off screen (on the top and bottom right corners). can not access the X(close icon), minimize the icons (top right), clock on the lower right). The screen has no black box.  What can be the problem. Is it because of the display cable?

  It was a problem with the display cable. I got the cable changed and the problem disappeared.

• Lack of space disk or memory, cannot display the requested font. Outlook blurred fonts

  After I've been using Word and Outlook for awhile, I get the following message: there is not enough memory or disk space. Word cannot display the requested font. Once I get this error message, my fonts are truncated in Word and Outlook.

  I am running Windows Vista 64-bit Home Premium with Office 2007. I have 4 GB of RAM, with settings in automatic mode (Windows detect).

  I'm not a power user. I googled and searched Microsoft help, nothing helps.

  My brand new computer becomes almost unusable! Help, please.

  kimlife,
  Thank you for visiting the Microsoft Answers community forum.

  There are a few things that can cause this.  One is a damaged normal.dot template, one is a damaged printer driver, and the other would be a sort of third part add in.  Start with the simplest to try so that replaces the normal.dot template.

  Click Start, click search, and in the search for box, type normal.dot.  There should be a search option you can check "Search hidden files", which is checked.  If it does not, try searching * .dot.  It can be difficult to find because it is a hidden file.  You may have to go into options files and make sure that 'show hidden files' are ticked.  Whenever you find the normal.dot file, rename the old.dot and restart your computer.  Open Word and it will create a new normal.dot template, which is what Word uses as a document is empty by default.

  If this does not work, read this article about a third-party add-in that can cause this problem:
  http://support.Microsoft.com/kb/906899

  Let us know how it works and if you need additional assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.