Error! The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine

Similar Questions

• The ESX host error - the Virtual Machine creation may fail

  Someone at - he never seen this error of creation of Virtual Machine may fail because the agent is unable to reteive options for creating Virtual Machine from the host

  Don't forget to leave some points for messages useful/correct.

  -KjB

  VMware vExpert

• Automatic shutdown of the virtual machines in the Update Manager

  Is it possible to automatically stop the virtual machines as part of the Update Manager?  We have our virtual machines configured for auto power off/start with the host.  But when we apply a lot of patching ESX using the Update Manager, he waits for us to stop manually before putting the host in maintenance mode.

  Any way to automate that? Thank you!

  But when we apply a lot of patching ESX using the Update Manager, he waits for us to stop manually before putting the host in maintenance mode.

  Lol WHA each fails to accomplish is ESX is an enterprise product, it must be used with vMotion.  If the Update Manager is designed to make this easy and pain free, so if you have the shared storage, your VM will migrate to another host, maintenance is done, and the virtual machine back.

  ESX is essentially a hands on environment.  I know everyone can't afford a SAN, but ESX caters to these large enterprise systems that do not have SAN.

  By making a patch, so we are now toward the Windows stand alone everyday server where you have done EACH server, or do it manually power off / closure of EACH virtual machine is EVEN easier to do this 1 by 1 on EACH physical host.

  Consider so it cannot be the best option, it isn't that hard to select ALL VM under tension and click "shut down guest.  Besides that if you plan for a breakdown, you can stop the VM remotely (if windows) by using a shutdown script.

  There are a lot of options to do this, but there is no stopping the VM before update, you must do it manually.

• Help. The CPU has been disabled by the guest operating system. Power off or reset the virtual machine. WHY?

  Greetings.

  I have a 5.5 with an operating system Red Hat 5.10 ESXi environment. The OS worked fine until a few days ago. ESXi displays the error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine. I Don t know why my server displays the error if my environment was OK. Could be a kernel problem? operating system problem?

  Ideas?

  Thanks for the help.

  Have a look here. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2000542

  Did you recently patch your VM? Looks like when the guest operating system runs the incorrect commands that it can have a deactivated processor.

• SRM 5.5 - vSphere replication - error: impossible to reverse the replication for the Virtual Machine. A snapshot operation cannot be performed

  Hi all, we have just run a test DR failover of a couple of virtual machines in our protected our failover site and all site swung perfectly, two virtual machines came online and all applications work well. However when we cam to r-eprotect machines virtual, we get some errors.

  One of the virtual machines seems to have lived the reprotect end process, it is still running, but has not moved to 89% for some time. The virtual machine has a couple of grand (a little less than 2 TB) VMDK. slow progress is just a consequence of the large VMDK?

  More worrisome is the virtual machine which don't reprotect at all. It generates an error whenever I click on the "Restore" button (error: impossible to reverse the replication for the Virtual Machine.) A snapshot operation can not be performed).

  
  Does anyone have any ideas as to the cause?

  Thanks in advance for any help.

  Andy

  Finally got to the bottom of this. The issue was that reprotect SRM work was trying to dispel any snapshots that were taken on the computer object virtual destination in VMWare, but could not clean snapshots.

  The reason why snapshots would not consolidate was because it was snapshots of temporary VEEAM who in fact any snapshot file listed in the VSAN data store. So when we looked through the browser data store, no snapshot file existed in the virtual computers folder. Trying a manual removal also failed.

  To fix this, we created a snapshot of the virtual machine in the original data center (note is the engine to the bottom of the virtual machine), this effect was to get rid of the 'fade' snapshot that was visible in the Snapshot Manager that VEEAM backup had left behind. Once this had disappeared, the reprotect back to DCA worked perfectly.

• I have monthly CC and LR and I try to download the new LR6 on my Mac. The error I get is "you run an operating system supporting Lightroom is more." Refer to the system requirements for a full list of supported platforms

  I have monthly CC and LR and I try to download the new LR6 on my Mac. The error I get is "you run an operating system supporting Lightroom is more." See the system requirements for a complete list of the supported platforms. "I checked that my requirements and LR should be supported. Don't know what else to do I can't download.

  Hi Jenn,

  Please check the help below document for the technical specifications for the purpose of Lightroom:

  The system configuration required

  Kind regards

  Sheena

• Error loading operating system on the virtual machine

  Recently, I used VMWare Converter Standalone Client 4.01 to p2v my own Windows XP SP3 machine and import it in our server ESXi 4.0.  The conversion completes without error, but when I try to start the virtual machine, it says "error loading operating system."

  This is the first time I used the converter, so all advice here?

  Thank you, Jay

  Use of the disk set.

  Also remember to change the IDE disk, SCSI, I don't remember where that is option but I've seen causing him problems with p2v migration.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '.

• Convert the virtual machine to another pc, but... Operating system not found?

  I use VMWare converter to convert a PC Esxi Esxi (on IBM X3650M4) comments, when to start guest VM of the PS, it displays "Operating system not found", there is no hard drive computer virtual on the BIOS of the virtual machine, what happened?

  So your source host where this virtual machine was originally executed is ESXi 5.0, is?

  Please right click on your VM, go on "Change settings" and also view this screenshot and/or join the VM's vmx file here please.

  What is the guest in this virtual machine operating system?

• In opening the virtual machine: "could not find a peer valid to connect to" or "error of Transport (VMDB) - 32" / "-14" ""»

  Hello

  Since yesterday after a reboot of my host (DELL E6410, W7 SP1 64-bit, 8 GB RAM, 2x750GB SATA3 running WorkStation 9.0.2 Update Windows Update), I can't open my existing VM.

  I often get "can not find a valid peer to connect to" and sometime before: "Transport (VMDB) - 32 error: Pipe: reading is not'or'error of Transport (VMDB)"-14: fitting broke"»

  I worked for 2 years on this machine without a hitch, WS7 reclassification in WS9 without any problem.

  FYI: we have changed the domain 3 months ago, but it has never be a problem.

  I have google and search several Forum. So far, I tried to:

  -restart the service vmware-auth as an administrator

  -launch vmware.exe administrator

  stop/start the vmx86 service

  -uninstall / reboot / install Workstation.  3 times. First using uninstall from the Control Panel, then doing a / clean before installation and finally track down any file/reg entry.

  -HE asked if any group policy changes were made recently (like not allowing to run vmware.exe?)

  -Rename vmware.exe (logs I look similar to what is in this post: http://communities.vmware.com/thread/331099?start=0 & tstart = 0 ... but no luck)
  

  -excluded vmware.exe in my AV (Microsoft ForeFront). Unfortunately, in that I'm not allowed disabled...

  -Open the virtual machine using the drive == > does not work either.

  This isn't a file corrupted in a virtual machine (even backup - 7zipped - don't work on my laptop... but the launch on the other).

  Even a newly created WM (boneless), unbootable! :-(

  *, BUT to BE NOTE *: if a virtual machine is created as a shared virtual machine, I can start the application locally remotely! And this same VM, if started (via the.vmx) does not work using Workstation GUI!

  I have attached 2 newspapers. Work a (vmware.log remotely) and the inactive (vmware-vmx - 4072.log thru WS GUI).

  Of after what I saw (and what little I understand), it's as if the CPU is not detected?

  The two newspapers have this line:

  FeatureCompat: EVC masks:

  but the non-working goes - we with

  Module CPUID initialization failed.

  While working it display information on CPU (hostCPUID name / family / type... etc...)

  Any idea is welcome.

  I'll answer me to my problem!

  A lot of research to this knowledge.

  In summary: don't mess with the processor affinity... or keep it in mind!

  Response to distinguish:

  I installed 6 months ago a small utility named prio (search for "PRI prnwatch"), because it can save the priority of a given process. What I did notice, is that it also save the processor affinity ! What happened: I probably changed the affinity once for a VM running to give greater priority to a 7zip archive process to complete more quickly (setting HT no core to 7zip and one - or 2? - HT core to VM). Everything works until the next reboot, where the CPU detection during * start EVERY * VM has been somewhat "damaged" leading to the wrong log message: failed initialization Module CPUID.

  This is the reason of *my* question. Perhaps it might help someone else?

  TIPS:

  For advanced people who do not want to check the processor affinity of each process in the Task Manager, you can try this Windows Powershell command (remember to launch PowerShell as an administrator):

  Get-Process | Format-Table-PriorityClass name, ProcessorAffinity property

  ProcessorAffinity column gives the number of representation of the authorized core, 1-bit by heart.

  15 = 1111 is all possible core (for a logical processor 4). Mine is 1 CPU with 2 core HT <=>4.

  LSB is the core lowest. So if you allow only core0 and core3 (1001) on a process, the number of ProcessorAffinity will be 9...

  Post edited by: cbiero (LSB and MSB...)

• Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I see that this error was mailed here, but can't seem to find a position with a resolution.

  We use Lab Manager 4.0.4 and just upgraded the hosts in our laboratory.  Before updating to ESXi 4.1 ESX 4.0 u1, we cancelled all VMs in all configurations.  There is none who were suspended, they were all turned off.  We have improved vcenter 4.0 to 4.1 as well.  We moved from a dell poweredge 1950 with two quad core intel L5410 to a r610 with two quad core intel processor E5506.

  When I try to turn on some of the lab configurations (our VM models all work fine), I get this error:

  • Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

  I threw the State for the lab configuration (even if it was turned off and cancelled) and still get this message.  I guess the processor architecture of these chips is quite similar, and both are Intel.

  If I go into this directory of Manager of laboratory inside the data store for one of these virtual machines that does not light and add to the inventory, he turned and starts fine on my server esxi 4.1.  So how do Lab Manager to get account it's well deploy and start it?

  Hey billk.

  Although not supported completely, you can solve it by going to the SQL of Lab Manager database.  Make sure that you back up your database before you do anything like that.

  Open the table "fsdir" and corresponds to the dir_id with the id Lab Manager VM.  Once you find the relevant line, change suspend_proctype_id to null (Zero-Ctrl).  You can do this while Lab Manager is still running.

  The results can be unstable (i.e. Windows can crash if it was a drastic change of CPU), but at least you look at a hard reset.  The bat reset certainly not being able to return to the previous state.

  Also note that while Lab Manager does not include CVS, if you activated, your virtual machines still work in CVS mode.  If you have a mixture of heterogenious of hosts in a cluster for Lab Manager, you can see this question pop up a lot.  There is absolutely nothing wrong with take back the virtual machine because of the VCA, but Lab Manager thinks otherwise and prevents it.

• ESXi 4.0 on Dell 1850 this host doesn't support VT you have configured the virtual machine to use an operating system 64-bit client.

  Hello

  , I have in 3 data centers Dell 1850, identical hardware configurations.  I installed Esxi 4.0 to the ISO from site Web de VMware dell custom help. He is successfully installed on all servers, without error at all. I've updated them all to the last generation, using VMware vSphere Client. I have a problem with one of the server when I want to use 64-bit machines, he realizes: this host does not support VT you have configured the virtual machine to use an operating system 64-bit client.  However, this host is not able to run 64-bit virtual machines or virtual computer has 64-bit support disabled. For more information, see http://www.vmware.com/info?id=152. I don't understand why I got this, servers are identical, versions of BIOS, firmware, and all updates are the same. There is also a warning in the configuration tab, on the State of health link.

  Thanks in advance for any helpful suggestion.

  Yes according to the description of CPU, it seems that they do not support intel VT:

  http://Ark.Intel.com/product.aspx?ID=28016&processor=&spec-codes=SL7DX, SL7HH, SL7PF, SL7TD, SL8KQ

  Please give points for any helpful answer.

• Java with Minecraft error "error: could not create the Virtual Machine Java.»

  When I try to open Minecraft SP, it won't let me open and there is a message saying:

  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  How can I solve this problem?

  Hello

  What is the operating system installed on your computer?
   
  You can ask your question on the Minecraft forums for assistance. Check out the following link.
  http://www.minecraftforum.NET/viewforum.php?f=1002

• Cpu for vm resource stocks are much lower than the virtual machine in the list of resources

  I move a virtual machine from a PR, but I got this warning

  

  I checked and there was no reserve on the virtual machine and the destination THAT RP is set to Unlimited and expandable reservation

  any idea?

  See: VMware KB: the movement of virtual machines between resource pools triggered the warning: percentage of Incorrect CPU

• Internal error starting the Virtual Machine after Crash

  I'm in Yosemite and when running a virtual Windows 7 machine it suddenly stopped working. The beach ball slider off for half an hour and I was force quit Fusion 7. While trying to launch the virtual machine again, I get a message "Internal error" generic.

  Already tried: restart my Mac, repair permissions, uninstall/reinstall Fusion 7, even try to fix the main VMDK file (it is divided and returned without error).

  Any suggestions?

  Looks like you run your virtual machines from a disk formatted in NTFS by using the Paragon NTFS driver.  Have you tried to use disk utility to check the integrity of the NTFS partition?  Error messages suggest strongly that the NTFS file system may be corrupted or there may be a problem with the NTFS driver.  (I think that the NTFS driver is not available when you used the recovery environment to check disks).

  If this volume extracted also OK through the disk utility first aid option, you pourriez either requires an upgrade of your driver of Paragon NTFS since version 11 to version 12 (which their Web site claims is the first version with support of Yosemite), or you may need to set the drive on a Windows machine and have windows to control its own native on the volume file system in Paragon file system audit case missing something.

  See you soon,.

  --

  Darius

• Host CPU is not compatible with the requirements of the virtual machine to CPUID

  Hi all

  I try to power on a virtual machine Windows 64 bits on the ESX the Vcenter 4.1, I keep receiving the message:

  "CPU host is incompatible with the requirements of the virtual machine to CPUID level 0 x 80000001"edx"registry."

  Hist goals: 0000:1000:0001:0000:0000:1000:0000:0000

  * Longmode, required when a virtual machine is configured for 64-bit guest OS

  My equipment is the intel core i7 920, with MMX, SSE (1,2,3,3S,4.1,4.2), EM64t, VT - X

  My motherboard is ASUSTeK computer Inc., P6T DELUXE

  Please let me know if you can help,

  attached some shots compared to the problem

  Do you mean that because I'm under ESX 4.1 on VMWARE WORKSTATION, that is why I will not be able to run a 64-bit guest operating system?

  Yes, this is the case, and there is no work around.