HP dv6 service and maintenance manual

Similar Questions

• Pavilion dv6-6c40se and support the blu - ray?

  Hi all

  can I use discs blu - ray on my [dv6-6c40se], as the manual says I can, but the image of the laptop on this manual (and I don't know it's wright for my laptop manual) have a fingerprint on it, but not mine

  Maintenance & Service guide shows three possible configurations for series books model dv6.

  (1) Blu - ray Disc ROM FX SuperMulti DVD±R/RW Double -.
  Control layer

  (2) R/RW SuperMulti FX Blu - ray player

  (3) SuperMulti DVD±R/RW with Support Double layer

  If your player will not play BluRay discs, then your a #3 is installed.  You should try to play a Blu - ray disc in the drive. This way you will know for some.

• computer freezes and must stop and restarts manually to restore, it often happens in all programs

  computer hangs in all programs frequently, symbol of computer work when the mouse is moved, can not close except manually, after reboot manually get the normal shutdown error message and asks if want to restart windows normally, after a computer reboot works fine until sherbet which could be quickly or some time later, when it happens in all programs

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Where to find maintenance manual to disassemble the satellite A210-171

  Hi guys.

  I'll have a bit of a dilemma with my computer laptop satellite A210-171.
  The CPU fan plays up and I need to replace.

  The problem is that I'm unable to strip this thing down.
  I already have some small studs plastic broken on the Strip above the keyboard, and I now know exactly how to remove the touchpad and the cover.

  I use the FRU guide for satellite A210 claiming to also apply to the satellite a210 series, but many of the screws indicated in the guide are not on this laptop.
  The position of some components also differ.

  I'm not familiar with working with computers and their components, but when it comes to laptops, I feel very uncomfortable when something does not move and I don't see why.

  If someone could direct me to the right guide FRU for my model or ome other material of appropriate reference, I would be very grateful.

  Thank you.

  Funster58

  Hello

  Unfortunately, maintenance manuals don't are not downloadable did not find all pages that provide these manuals only manuals that are also pre-installed on Toshiba laptops can be downloaded.
  But as far as I know Satellite A210 is the same as Equium A210 so the two series are not very different.

• During execution of the backup and maintenance on one of my computers, I noticed a folder and the file that I can't identify me...

  Original title: identity of unknown folder

  During execution of the backup and maintenance on one of my computers (Windows xp home, sp3), I noticed a folder and the file that I can't identify.  The name of the folder is cc68f6b7a7ca948eefb018f001 and the name of the update.exe file.  The properties of the file that it is a Windows Service Pack installation.  I tried Googling the name of the folder, but found nothing.

  Can you tell me with regard to this issue, and what, if anything, I have to do?

  Thank you.

  When some programs (including Windows) installs things, it can create a temporary folder composed of 20-30 random letters and numbers or random numbers and letters in the root of the drive of the volume with more free space.

  This explains why the records are sometimes on your C drive or any other drive - the most space?

  For example, you can see a similar to or called folder:

  D:\9470bb12e8a4f3447657236478e41c5

  There may be other folders and files in this main temporary folder such as amd64 and i386 platforms.

  They should normally be deleted when the installation is complete, but sometimes they are not - especially if the installation fails.  They are harmless but annoying.  You can think something is wrong when there are no or fear, that the files are really necessary.  To avoid confusion, you can delete the temporary files.

  If your installation has failed or the installation does not remove the folder to the random name when it finishes running again installation will be another folder at the random name.

  You may be able to identify installation (out of curiosity) by looking at some of the contents of the folder and decide if this installation was not serious, just remove the files/folders.  If the installation does not work for some reason, run again just installation will create a new temporary folder to the random name so the old temporary folder is really useless.

  Records are sometimes tough to remove.  Even if you are an administrator on the system, you might get a "sharing violation", "access denied", "used" or type similar message when you try to delete temporary folders.  Facilities sometimes use different permissions that can have a regular user with the administrator group.

  There are many methods to try to remove the folders, and some require third party programs to install or change some windows settings that could compromise the security of your system if you do not change them back when you're done.

  Start your system in Mode safe mode (by pressing the F8 key several times just before XP attempts to load) is one good method to try to remove the files because it does not have to make any changes to your system configuration or by downloading third-party programs.

  If you are running XP Home Edition, the following section on turn off "Simple file sharing" does not apply to you since in XP Home, Simple file sharing is always turned on.  If you are running XP Home Edition, skip the next few paragraphs and resume where it says:

  "If no part tool above work try a third popular called Unlocker.

  If Safe Mode does not work you can change the security of the folder when you start in Normal Mode to give your username full control over the files by navigating to it in Solution Explorer, click on tools, Folder Options, view and in the advanced settings window, uncheck (at the bottom of the list) use simple file sharing (recommended) and click OK.  This disables him recommended simple file sharing on your computer if you want to turn it back on when you're done to make everything you do.

  Right-click on the files of interest, click Properties and click the now visible security tab.  Change the properties, but you need (for example, select your user name, and check the box to allow full control), click OK to apply the changes.

  With usage share of active simple files (recommended) the checked the properties of the folder tabs are:

  General, sharing, customize

  With the use of sharing files simple disabled (recommended) box unchecked, the properties of the folder tabs are:

  General, security, customize

  Now, try to manipulate/delete the folder.

  It's a good idea to go back to the Explorer and the cheque in the box easy to use sharing files (recommended) when you have finished making everything you do.

  If none of the above works, try a popular third-party tool called Unlocker.

  Unlocker can be downloaded here:

  http://www.emptyloop.com/Unlocker/

  If you use Unlocker, be sure to install because he wants to add a bunch of options, addons, shortcuts and other extras that you don't need.

  You must add the shell extension so when you right click on the offending file, you will have a Unlocker option to choose.  I would just install it long enough to clean up the leftovers and then, I usually just uninstall and all parts of it.  You can always install it again another day if you like.

  Unlocker can be uninstalled when you have finished using it.

  Reboot when finished to ensure that boring records are really missing.

• I have a HP Pavilion dv6-2088dx, and the power light flashes constantly, that means?

  Help.

  I have a HP Pavilion dv6-2088dx and have had for a little less than two years now.  About 8 months ago, I replaced the original battery with a long life Rayovac battery.  Recently my laptop power light has been constantly intermittently to about 1 flash every 2 seconds, regardless of the level load and/or if its plugged to the power source.  What exactly my computer is trying to tell me?  Thanks for the help in advance

  -Kyle

  I found the link to your question.  I hope this helps.

  http://h10032.www1.HP.com/CTG/manual/c01884775.PDF

  

• problems with the connectivity services and ePrint 310a

  I just got a HP 310a as a replacement for what said HP was a 210 a defective. The 210 a would not stay connected to my network and support HP gives up and sent me a gift card to buy a replacement.

  I've set up the replacement. He also had the problem of connectivity but other features wireless everything has worked well. I could print by e-mail to a dedicated e-mail address and printing via my ipod using HP iprint app.

  While he was trying to use the previous suggestions of support to solve the problem of connectivity, the printer now has lost its ability to connect to web services and I can't activate the features of eprint. "" When I try to connect to web services, I get an error message indicating that "web server problem" "problem connecting to the web server.

  I set up the printer with a manual address and that is where the problem started.

  Please, any suggestions how to get this resolved.

  Here's what I recommend:

  1 set a static IP address, but make sure that it is outside the range of your router's DHCP.  If your router uses the range (.2 a.254, reduce the a.2 a.200 beach or something and then assign the printer apart from this, comme.220.)

  2 the gateway address goes into the field of the bridge and the first DNS entry.  Do not fill in the second.  The IP Address of the gateway usually ends par.1

• Dell authorized service and repair service stores (retail).

  I am unable to find anywhere on the Dell website information about "authorized Dell computer repair/maintenance service of stores."  Reference Dell still maintains these types of service partners?  If so, how can I contact Dell for a list of authorized repair/maintenance service stores in my area: Yonkers, New York 10710.  Thank you for your attention and your help in this matter.  Best regards, Rodney323

  jimmyd101

  Hello. The link above no longer appears valid. There is no other choice in the drop-down list for repair and maintenance.  I have a third-party (non-Dell) guaranteed ask but the insurance company requires an estimate of repairs to an authorized manufacturer.  T Dell same not such a thing more?

  If you are a U.S. customer, repost this in the forum of customer care.

  http://en.community.Dell.com/support-forums/customercare/

• HP Envy 15 TS: Number of Service and product number of the conflict

  I just bought a laptop HP Envy 15 TS online: the serial number in the battery bay and number of product or SKU shown with HP product detection service and PC info app match at all.

  Is this a problem for the maintenance of this device in the future? Is this a mistake or dodgy machine? I have 30 days to return the machine.

  Thank you

  Geoff_Bamber wrote:

  I just bought a laptop HP Envy 15 TS online: the serial number in the battery bay and number of product or SKU shown with HP product detection service and PC info app match at all.

  Is this a problem for the maintenance of this device in the future? Is this a mistake or dodgy machine? I have 30 days to return the machine.

  Thank you

  If you buy a laptop (Custom-To-Order) CTO of HP, it is common to have more than one P/N listed.  The P/N to be used in that printed on the label next to your serial number.

• PROBLEM WITH BITS (BACKGROUND INTELLIGENT TRANSFER SERVICE) AND WINDOWS ~ $BT IS NOT CREATED EVEN AFTER ALMOST 25 DAYS OF RESERVE WIN 10 COPY THROUGH "GWX.

  Hey, I heard that the problem was actually the service "background intelligent transfer service" has been collapsed don't know when and how it was stopped. I STARTED THE YESTERDAY(12-OCT-2015) SERVICE AND SET IT TO AUTOMATIC (PREVIOUSLY HAS BEEN SET TO MANUAL). THAT IS WHY I HAVE NOT FOUND THE WINDOWS ~ $BT FOLDER SINCE I RESERVED(18-SEP-2015). I CAN'T EVEN TODAY (13 OCTOBER 15). I HAVE a PROBLEM HERE, THAT PIECES OF ROUND BUT AFTER 2 OR 3 BOOTS, IT BECOMES AUTOMATICALLY ARRESTED AND SET to AUTOMATIC (DELAYED START), that - what THIS MEANS? HOW TO MAKE IT (BITS) ON FOREVER. PLEASE HELP PLEASE HELP? WILL NEVER GET MY FREE COPY OF WINDOWS 10 THROUGH 'GET WIN10 APP '. PLZ ANSWER. PLEASE.

  Hello

  Thanks for posting your query to the Microsoft forum.

  I appreciate your efforts to try to solve the problem and I will definitely help you with this.

  BITS may stop if there is corruption in the Windows files, we can try these methods to solve them.

  Method 1: Run SFC scan

  I suggest that you can exercise SFC scan and check if that helps. The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. It is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  See the link: use the File Checker system to repair missing or corrupted system files

  If this does not help, follow method 2.

  Method 2:

  Please try these steps below and check:

  1. Press the Windows key on the keyboard
  2. Type command line
  3. Right click on and run as administrator

  Step 1: Run the following command at the command prompt with administrative mode.

  SC create BITS binpath: "c:XwindowsXsystem32Xsvchost.exe - k netsvcs" start: delayed-auto

  Step 2: Run these commands one by one in the box RUN or 'Command Prompt'

  regsvr32 oleaut32.dll

  regsvr32 jscript.dll

  regsvr32 vbscript.dll

  regsvr32 msxml.dll
  regsvr32
  softpub.dll
  regsvr32 wintrust.dll

  regsvr32 initpki.dll

  regsvr32 cryptdlg.dll

  regsvr32 qmgr.dll

  regsvr32 qmgrprxy.dll

  Step 3: Restart computer

  You can also download the Windows 10 from the link below and check.

  Download Windows 10 and run the installer from the desktop.

  Note: I strongly recommend to back up all your important files and folders on an external storage device before performing the installation.

  Please post back with the results. We will be happy to help you further.

  ________________

  Thank you best regards &,.

  Isha Soni

• Power of Microsoft service and MMCSS causing startup freeze

  I have Windows 7 set to automatically download updates from one day to the next.  He downloaded a few of the latest updates (lot of September), I installed them, and then the computer started to freeze during startup... it would lock up just before the login screen.

  I went into safe mode and has a restored system.  Which corrects the problem.

  Then again downloaded and installed updates.  I woke up in the morning to find my computer frozen during startup, just like before.  So I tried to do a restore of the system, just like before.

  This time, the system restore did not work.  And after that, I couldn't even in safe mode... the computer freezes even when in safe mode.

  Then I booted from the CD with Windows 7 and tried a restore of the system in August.  Who has not fixed the problem... the computer always locked up at startup.

  Then I was the restoration of the image around August 20.  Who not has not yet fixed the problem.  I was able to get into safe mode now, but the computer still froze when I would start normally.  This has never been a problem before the latest updates of September.

  I then reduced what services were originally the lock upward.  It turns out that if I turned off the power of Microsoft Service, my computer should start normally.  Alternatively, if I disabled the Multimedia Class Scheduler service, my computer should start normally.  But if I have these two services running at the same time, then my computer hangs at startup.

  Right now I have the MMCSS off, but I can not all the sounds from my computer because of that, and the Windows Audio Service does not work.

  Now I'm in a situation where I don't know how to solve this problem.

  Hello
   
  
  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
   
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  
   
  Method 2.
  Try to update the audio drivers to verify.
  Update your sound driver in Device Manager:
  a. Click Start and then click Control Panel
  b. click on system and Maintenance
  c. under Device Manager, click on devices and equipment display
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  d. expand sound, video and game controllers
  e. right click on your Audio Controller, and then click Properties
  f. Select the driver tab
  g. click the Update Driver button.
  h. Select the option automatically search for an updated driver
   
  Windows will now look for an update for your Audio drivers locally and on the internet and then will guide you through the process of installing the driver.
   
  For more information see the links below:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Automatically get recommended drivers and updates for your hardware
  
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Guide service and Maintenace for P6-2133W

  Someone at - it Service and a Guide of Maintence for P6-2133W office, Plan the upgrade memory around February to 16gbs.    Windows 8 Pro installed excellent and good work so far - nice and happy with our performance so far.

  Thank you in advance and have a nice day

  Here are the;

  Main Support page,

  Page of specifications,

  Software and Driver Downloads page.

  and manual page

  for your desktop HP Pavilion p6-2133w

• Access to the Service of maintenance through Javascript

  Hey guys,.

  Had a problem with access to the service of maintenance through Javascript.

  Let's start first of all, here's the section of code:

  **********************

  var objXMLHttpRequest = new XMLHttpRequest();

  objXMLHttpRequest.open ("POST", "http://localhost:8020/determinations-server/interview/soap/10.4/OPA_IS", false); Point of Service endpoints, synchronous method

  " package of var = ' < soapenv:Envelope xmlns:soapenv = ' http://schemas.xmlsoap.org/SOAP/envelope/ "xmlns:typ =" " http://Oracle.com/determinations/Server/interview/OPA_IS/types ">\

  < soapenv:Body >.

  < typ:open - session-request / >.

  < / soapenv:Body >.

  < / soapenv:Envelope > ';

  
  

  objXMLHttpRequest.send (packet);

  
  

  **********************

  The ODS with the relevant innterview service has been deployed and I can test this very well through SoapUI. He returned with the correct answer in this casting the Session ID for the new session of the OPA.

  When I run the present thanks to my JavaScript code, I get the following error in my log:

  com.oracle.determinations.server.exceptions.InvalidActionException: no action for 'null' does exist in the service 'odsInterviewService104 '.

  Thus, it seems that it does not find "OpenSession" action that is needed.

  My question is: How to indicate the type of action in my SOAP package?

  I ran across the ODS code and I can see what is causing the error, but everything I try, I can't seem to be able to add action to resolve.

  Kind regards

  Evert

  OK, that is now resolved. Added action and settled the question of calls cross-domain that came after that.

  Everything works now.

  Evert

• To extract information of deployed services and their version number

  We have an EM environment where in we deployed composite applications. We have more than one partition with number of services deployed in them. We want to extract the details of deployed services and their versions in each partition of a file stored in a file or a table if it is stored in the table. We are not sure if this information is stored in a file or a table. Rather than pick manually the console each time, we want it be retrieved in a file or table will help us control the versions of the deployed services. Please help in this regard.

  Using Ant-ant - sca - mgmt.xml listCompositesInPartition f, we obtain details of composites deployed in a particular partition.

• Right now I'm working in a temporary site format. I'm hosting the site on my own computer. How to consider a temporary site to site online? What I need to improve my in-home service and it cost more per month?

  Right now I'm working in a temporary site format. I'm hosting the site on my own computer. How to consider a temporary site to site online? What I need to improve my in-home service and it cost more per month?

  Hi Traci,

  To push the live site, you will need to:

  1. Publish a site to BC (menu file > publish)
  2. Then go in your site admin control panel and the launch of the live site to pay or to redeem a free site.
  3. Add the domain to the site
  4. Change to the Registrar of domain name servers

  For steps 3 and 4, please see the following link:

  http://docs.BusinessCatalyst.com/user-manual#! / site-settings/site-areas/change-the-d n-name-of-your-website

  The following link may also be useful:

  Launch of a Muse Site | Adobe Muse CC

  Kind regards

  Sonam