computer freezes and must stop and restarts manually to restore, it often happens in all programs

computer hangs in all programs frequently, symbol of computer work when the mouse is moved, can not close except manually, after reboot manually get the normal shutdown error message and asks if want to restart windows normally, after a computer reboot works fine until sherbet which could be quickly or some time later, when it happens in all programs

Hello

What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).

----------------------------------------------------

Follow these steps:

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

==========================================

After the foregoing:

How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685

Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).

How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

A quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------

Tools that should help you:

Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

Autoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html

There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html

Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp

Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/

===========================================

Vista and Windows 7 updated drivers love then here's how update the most important.

This is my generic how updates of appropriate driver:

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

===========================================

Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.

Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-us

Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • I have upgraded to windows xp pro and when I downloaded the sp2 computer freezes and restarts when I connect to internet

    I have upgraded to windows xp pro did all updates, and when he places classified sp2 it restarts fine then when I loged on more updates to update it freezes and reboots, when she will recover no codes or anything be it what could be the problem...

    Hello

    1 is it only during the use of the internet?

    Method 1.
    a. click on start and then right-click my computer.
    b. click Properties.
    c. click on the Advanced tab and then click settings under Startup and recovery.
    d. under system failure, click to clear automatically restart it the box.
    e. click OK, and then click OK.
    f. try to reproduce the error message.


    Method 2.
    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    b. you need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    Also I would ask you to update all the drivers of material from the manufacturer's Web site.

    I hope this helps.

  • Computer freezes for a split second every 3 seconds, the cursor disappears for a split second and the clock freezes and restarts.

    Original title: OS time questions continuum (microfeezes)

    It seems that my computer freezes for a split second every 3 seconds approximately. My cursor disappears for a split second, and because the clock freezes and restarts, it displays a worst time of the day. Audio and video have the same gel splitsecond. The problem persists in safe mode. Dell Inspiron 1520, servicepack2 of vista running. I've never had any problems with this machine. Here's a video I took of the number: http://youtu.be/fbUeK8U7wHw

    I would like to know if there is other info/specifications that could be useful.

    Thank you.

    Good,

    1:
    Updated the chipset drivers even though it said I was with the best.

    2:
    Run a SFC scan, which revealed no violations of integrity or files not repaired.

    3:
    five hours and 8 infected files later, my computer is totally cleaned.

    I opened the event viewer, but I don't know what I'm supposed to be looking for. There are many changes to the machine because it began to act up, which were intended to correct the problem. I installed the Service Pack 1, then 2, scan MS Safety and new chipset.

    I also ran a memory diagnostic, but all was well.

    What should I look for in the event viewer? I know that the problem started in a 12 hour window. Should I save and post the logs at the time?

    There is a certain mystery. We need Sherlock Holmes.

    -UPDATE

    I have reset the system to its factory settings. Now, it's as if it were new.

    The problem persists. He still hiccupping. It freezes again for a few milliseconds about once per second. And I'm going crazy.

    UPDATE 2-

    The computer was closed for about 12 hours and when it restarted and Windows initialization complete, the problem disappeared. It works normally for a vintage computer 2007. I'll let you know if I learn more.

  • iMac freezes and restarts 10.11.4 OS

    I have an end 2015 27 "5 K iMac. Since the upgrade to OS 10.11.4, the computer crashes for 15-20 seconds then restarts. I took it to the Genius Bar. There was not a hardware problem. They have restored the system. When I came back, I've set up as if it were brand new. I have installed all the latest versions of the applications from the App Store and directly from some third-party Web sites (all Apple certified). Still, it freezes and restarts. This has been reported as a problem by OS X Daily in an article dated March 26, 2016. However, when I spoke with an Apple Advisor what I had experienced, he still do not think that it was a BONE 10.11.4 question. He told the demand for a second session of Genius Bar because he thinks that it is always a hardware problem. I'll take to be sure. If no hardware problem is discovered, I hope I can convince the technology it is a BONE 10.11.4 problem then it gets fixed in the 11.5 update which was seeded to developers. Everyone knows a problem of freeze and reboot?

    Hi mtnmn, there are a couple of tests, you can try it yourself. Side software, download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information. Dosimetric, you run AHT using Apple Hardware Test - Apple Support. While Apple has the best diagnosis for equipment, it will be at least give you an idea if there is a hardware problem.

    EDIT: in fact, a 2005 iMac does not satisfy the requirements of the system for El Capitan.

    OS X El Capitan - technical specifications

  • Freezes and restarts on 2015 5K running El Capitan iMac and am ready to freak me out

    Hi guys,.

    If I posted my check and reports being panic, could someone tell me what caused random freezes and restarts on my iMac 5 K - ish, El Capitan running? I am a designer/Retoucher and I am in the middle of a big job, of course.

    He went on and off for a few months. I have cleared my startup disk and played fresh OS installs (didn't even use Migration Assistant just to be safe), three times. I installed apps one at a time try to refine what is the cause but could not.

    At first I thought it was my mouse Logitech G502 because when I went to an old mouse for a few weeks the problem has disappeared. But yesterday, listening to iTunes via Airplay and working in InDesign, the system froze again.

    I wonder if she might be SoftRAID(4) and/or my two RAIDs of 4 external ThunderBay?

    Thanks in advance!

    Steve

    We can take a stab, please publish a report full of EtreCheck, and if we do not see everything that you can post your last report KP.

  • MacBook Pro freezes and restarts when holding

    My Macbook Pro (MacBookPro9, 1 or MD103LL/A 2.3 GHz, OSX 10.11.4 i7) Decides to freeze and restart when lifted with the metal part under the trackpad and around it. It also does the same thing if I let my elbows on the same premises. What may be problem causing it? The machine already fell from anywhere and so, but suddenly decided to act strange. I opened the cover back after this problem and cleaned of dust or debris but did not find a noticeable amount either. The HARD drive has been replaced by an SSD at the Apple Store Amsterdam (Leidseplein) about 3 years ago and the problem has occurred for about a year.

    I would speculate that there is a bad internal connection.  Can you reproduce this every time?  If so, you may be able to locate it.

    Try an Apple Hardware Test.  It could offer a clue:

    https://support.Apple.com/en-us/HT201257

    Note that an error free AHT is inconclusive.

    Ciao.

  • computer freezes and goes to power saving mode

    Several times a day my computer freezes and goes into the power saving mode.

    Hello
     
    1. have you made changes on the computer recently?
    2. do you use a particular application when your computer crashes?

    Method 1.
    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
    Step a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222
     
    Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    Method 2.
    Also, check the logs of the observer eveny for recent activity on your computer and check.
    This article describes how to use Event Viewer to view and manage the event logs in Microsoft Windows XP.
    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I am running xp sp3 and cannot find the movie maker software in the all programs list, how can I access this software application

    original title: access to Movie Maker

    I am running xp sp3 and cannot find the movie maker software in the all programs list, how can I access this software application?

    You are welcome and thank you for the comments.

  • Where can I find "Windows Fax and Scan" if it does not appear under my "all programs"?

    Where can I find "Windows Fax and Scan" if it does not appear under my "all programs"?

    WIndows Fax and Scan is only supplied with Vista business, full and firm.

    http://Windows.Microsoft.com/en-us/Windows-Vista/send-a-fax

  • Computer, freeze, and Microsoft Security Essentials scan stop on this file each time: c:\Program HP Imaging\bin\hpqthb08.exe

    My computer, one almost four years, Dell Inspiron 1454 with Windows XP Pro, continues to freeze when left to sit for a few minutes. Also, I discovered that when I run the Microsoft Security Essentials quick or full scan analyzing stops on the file HP Digital Imaging mentioned above several times.  I was wondering if this means something on the reason why the computer freezes up. Also, Windows Live Mail continually lets me know that it is "not responding." Yet once, I guess it's because of the freezing problem not Windows Live Mail is the cause. I do not know.  I made some different system using different dates restorations and who has not solved anything so far. I use the computer during a run without problem, but if I have a cup of coffee, for example, I have to restart when I return. Sometimes, the slider moves, sometimes not, but no matter the computer is unresponsive after that I took a break or just out of the blue when I try to open an e-mail or another task. I guess it's time for a Mac, but I thought I'd see if anyone has some ideas on how to solve this problem. Thank you!

    Hello, Olivia,.

    This problem is probably due to an outdated HP Digital Imaging monitor. Even if you decided to switch to a Mac, the question may still popup because you have installed hpqthb08.exe.

    Fortunately, there is an update that you can apply.

    SP26427. EXE

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-26169-1&LC=en

    Or you can simply disable HP Digital Imaging Monitor.

    How to disable HP Digital Imaging monitor.

    http://www.ehow.com/how_5896835_disable-HP-digital-imaging-monitor.html

    Good luck.

  • My computer freezes and stops working as soon as the antivirus is used.

    Original title: My computer has detected a virus.

    & He is obviously infected by a virus, but now when you run any number of different programs of not doing a full scan is detected. What should I do?
    I rebooted, it about 3 times & the virus survived still reboots.

    It freezes and stops working as soon as the antivirus is used. When you try to reinstall the Virgin keep PC, gets it to halfway through the installation, stop & comes with a blue screen.

    Hello
     
    What is the blue screen error code?
     
    System freeze may be due to viruses or some third party applications. So let us, start your computer by disabling all third-party services and see if it helps.
     
    Method 1:
    Try to perform the clean boot and check if it helps, here is the link:
    http://support.Microsoft.com/kb/929135
     
    Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
     
    Method 2:
     
    I suggest you make a system full scan just to be sure.
    Here is a link that will give you information on how to perform a full scan of the system:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
     
    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  • Windows Vista Home Premium 32 bit Service Pack 2 - Office suddenly abandoned internet (via e-thernet), does not connect unless I have stop and restart manually

    A few days ago I pressed the space bar to wake up my (HP pavilion m8100n) office, and I met several things at once:
    1. the icon of the internet was just two monitors blinks back
    2. a box pops up saying "an audio input jack has been disconnected" (when NO such thing has happened!) and now I have no sound and just an "x"symbol next to the symbol of volume." I tried connect headphones, still no sound at all.
    3. my wireless mouse works most completely (again, I don't have anything) I had to use my Intuos3 Tablet mouse click autour.
    Then I restarted the computer, unplugged and replugged the usb for wireless mouse thing, solved #3.
    #2 is still pending.
    #1 takes a strange turn.
    The computer more remained in mode 'sleep', even if I told him to go to mode 'sleep', and every time he woke up upward, I had no internet (just two monitors flashing back and forth.)
    I went to the Device Manager and unchecked the box that allows the computer to disable internet to save energy, at least now when it comes out of sleep, he maintains the internet.
    The computer also doesn't stop- every now and again, he normally stops when I said to, but more often now I have to force it to close hold the button down.
    The question of the internet has gotten worse. While we had a few problems because of the company's Internet, we called and it is resolved.
    I know the router is not the problem because that all computer laptop in the House can connect to him easily.
    My computer always had problems with wireless cards, is also connected to the router via e-thernet.
    The only way I can work around the issue now is to stop (be it by asking the computer to stop or forcing), from, he and hope I get internet.
    If I don't have internet and instead just get the flashing monitors symbol, I tried to tell the computer to restart, but this does not resolve the issue.
    When it restarts, there not even internet.
    I still close, wait and start again, and * hope * I have internet.

    When I have no internet, and I'm trying to diagnose and repair, it always ends up by saying "Windows cannot solve this problem."
    When I click on network and sharing Center, he says that I'm connected to a 'network unidentified' - which is meaningless, because when the internet works, it says that I'm connected to the private network of our House.
    I tried Googling autour, but I really can't find someone else who has the problem as well as the problem of the e-thernet restart/stop.
    Any help with this would be massively appreciated, I do commissions online my source of income and I need this computer to work, because it's my graphic computer.
    (I've included all this other info in case it helped to identify the problem.)

    All my ports usb does not as well, I found this http://www.online-tech-tips.com/computer-tips/usb-device-not-recognized/ and it seems to have fixed everything! Even the problem of noise!

    Sorry to have wasted your time, thank you for the quick response, however.
  • temporarily, the computer freezes and buzzes then restarts then simultaneously using spider solitaire and play itunes worked fine util is about 2 weeks.

    Fix a computer temporarily freezes and buzzes, then restarts when simultaneously using spider solitaire and playing itunes worked fine util is about 2 weeks. Dell vostro, windows 7, office 10, itunes 10.6.3

    Help!

    Hello

    1 done only if you use iTunes and solitaire spider together?

    2 have you made any changes to the computer before the show?

    Method 1: Uninstall and reinstall ITunes and see if this is useful:

     

    Reference:

    Uninstall or change a program:

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

     

    Method 2:  Put the computer in a clean boot state and see if that helps.

    A clean boot to test if any element of service or third party application startup is causing this issue.

    Reference:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929135

    Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

     

    Method 3: Restore the computer to a date when it was working fine before.

    Reference:

    System Restore: frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  • HPG62 freezes with opening stop or restart on any OS - HDD and RAM pass all the tests.

    I have a HP G62 Notebook PC with a product XX165EA #ABV number with me. All material on the inside are original parts (RAM, HARD disk, etc. were never replaced so far)...

    I was running last Windows 8 on it and it would always freeze at the moment I click on stop or restart. I left it like that in for like 30 minutes to see if it comes back, it doesn't. Nothing else that hold the power button until it turns off would work.

    Suspect a hard drive problem, the first thing I wanted to do is to backup my data. So, I had a version of Ubuntu 10.10 NetBook edition (I try to stick to the basics as far as possible when you back up data on the last moments). Once I've saved data and decided to restart to solve, samething happened. Complete freeze.

    Suspecting that the affected hard drive the laptop this way, I turned off and removed the hard drive and tried. Still happens.

    Tried to remove the RAM and mounting module to another location. Still happens.

    Run the hard drive HP (quick and full) and the test of memory, that both run successfully without errors.

    Removed the CMOS battery, forcing a reset CMOS of laptop. Still happens.

    Anything left to troubleshoot?

    Scan is stuck at 52%.
    I bought a copy of Windows 8.1, all hard drive formatted and installed. The problem of gel seems to have disappeared.

    New copy of windows 8 did not work. It kept freezing. 8.1 only solved!

  • Why freeze and restart my computer

    As stated in the title and there is the problem of error messages that go with! It recharges especially ater about twenty minutes or more. I used the Mr. Fix - it to check and disable all programs that might be causing the problem, nothing helps. Is there another problem that I can not find and if yes, is there a solution or is my computer for the old, it is a hand - me down with the programs that I have no idea what they are or what they do. any 'help' will be greatly appreciated!

    Looks like you have malware. Boot in safe mode / networking, download malwarebytes, update it and then do a full scan

Maybe you are looking for

  • Satellite C850 - 19(d)-SD card cannot be read

    I've had my laptop for a year, during which I often used my 8 GB SD card, but in recent weeks, nothing happens when I put the card in. Because it worked before, I don't think it's because it's an 8GB one, it worked perfectly fine for a year. And then

  • Keep the IP if the DHCP server is offline now

    We have a customer who wants to be able to manage the IP addresses of all devices with DHCP, but the devices are supposed to keep their IP forever after the DHCP server has been taken offline. Is this a behavior that we can support on a controller of

  • Be directed to a page of advertising of the parental control

    FSS.live.com redirects to the page write-up on how to configure security for the family and how great it is:http://Windows.Microsoft.com/en-us/Windows/set-up-family-safety#set-up-family-safety=Windows-7 But the real family safety Portal went, and I c

  • the Windows Firewall has stopped working

    I tried the system restore to just before it stopped working

  • The Dimension 3000 processor upgrade

    I want to improve my old dimension 3000 D325 celeron processor equipped with a pentium 4. When I looked in the Dell user manual it says that the best processor I can get is a pentium 4 at 3.2 Ghz with hyper thread. When I looked at the site http://ww