HP Elite Book 8460p: shortage of pilots after the Installation of 32-bit Windows 7 Home Premium HP EliteBook 8460p Base model No.

Similar Questions

• HP G60-445DX coprocessor error 28 after the installation of 64-bit Windows 8

  I'm starting to think the driver is not available, but maybe it's here somewhere. I installed the NVIDIA chipset and it does not help.

  Hello:

  The only driver that works is that you will probably need to manually install the chipset driver, and if your video card is listed as the graphic base Microsoft Map, you might have to manually install the graphics driver too.

  To manually install the chipset driver, download and run the W7 x 64 file again. Conclusion of any errors that may appear.

  Go to Device Manager and click on the coprocessor in need of drivers. Click on the driver tab, click on set to update driver. Select travel it my computer for the software method and locate the installation folder that was created when you ran the file.  Who will be in C:\SWsetup\sp45169.

  Make sure that the include subfolders is selected and I hope that the driver will be installed.

  Do the same for the video card driver if you do not see the nvidia graphics card listed under Device Manager cards display section.

• Windows Media Player Album Cover Art disappeared after the installation of 11 Explorer (Windows 7)

  A large part of my cover art of the album disappeared from Windows Media Player after installing Explorer 11 (using Windows 7). It's hundreds of albums and for art that was already present before installing Explorer 11. The number of albums is to manually replace the work a tedious task seriously.

  It's the same thing with the installation of Explorer 10, but less than albums, so I learned to live with it. But it's now on a ridiculous on the part of the library.

  Can someone tell me where the art is gone? And why?

  If there is a way to replace it without doing a search for each album with missing art?

  If she is still on my computer somewhere, but is no longer connected to the media player?

  Where the cover of the album art in general is maintained? I can not even understand this, using my computer or go to my account to backup Carbonite.

  Thanks for any help.

  Hi Jamie...

  Your album covers on album is in application data files and it will always be there. There is obviously a problem somewhere and it can be if you rebuild your library of wmp that the work will return. I guess you can still see the piece in the album files ok - Yes?

  First of all if I should run the Fix It tool and the sfc scanner - after that restart your pc and see if anything has changed. (The scannow sfc tool will report if there are errors, it cannot fix)

  Fix - download and run the tool for WMP (all problem areas)

  http://Support2.Microsoft.com/FixIt/?WA=wsignin1.0

  sfc scannow - follow the instructions here.

  http://support.Microsoft.com/kb/929833/en-us

  After making such a report and we will then rebuild your wmp library if necessary.

  Ric.

  Afterthought - memory I got a screenshot of the cache of art, so here it is. It is also a "hidden" folder (you can tell by the gray look), that's why you don't find it easily!

  

• BlackBerry Z10 Print to Go has stopped working after the installation of KB2992611 on Windows 7 for x 64 system

  A large number of reviews and safety notice associated Microsoft updates showed in place on November 11, 2014 that were installed. Subsequently several failures that happened after the reboot (i.e. IE would freeze at start-up, Print to Go

  the stoppage of work - has indicated that there is no connection to the Internet, the PrintToGoLog.txt had much more detail).

  Other users of similar problem after a reported BB playbook KB2992611 updates has been applied,

  After KB2992611 (a security update for Windows 7 for x 64 system) has been uninstalled, Print To Go was working properly. Unfortunately, it is still not. Firefox is OK.

  Thanks for the info, this will help others with the same question.

  That KB was for all windows systems, but was mainly for Win Vista business.

  You can reset IE in Internet properties, program tab, or download another or do a system restore to November 10.

  Firefox is not affected because it is not incorporated in the system as IE.

• You can remove the flash drive after the installation is complete and Windows is completely implemented?

  Have finished installing 10 Windows on my Mac, I'm too afraid to leave the flash drive, I used in the process. Is it OK to take it out now? Or the downoads will be lost?

  Yes. Do not forget that you eject it before you disconnect it.

• Windows 7 - lost all contacts in 2 e-mail accounts after the installation of update of Windows Live Mail 2011 Essentuals

  What happened to all my contacts and how to bring them back?

  Import your emails, contacts and calendar in Windows Live Mail:
  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/fe9544b8-9f3c-4d85-8201-c0f3daaadb68 releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows 7 does not start after the installation of updates - sounds familiar!

  Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

  Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

  Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

  Here's the resolution...

  I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

  My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

  Now my system is up to date with all windows updates and I'm able to restart without any problems!

  Close this message.

• Remote Desktop disappeared after the installation of SP1?

  my remote desktop option disappeared from "Remote Settings" after the installation of sp1 on windows 7
  What can be the problem and how can I solve this problem?
  There is no problems during installation of the service pack

  Click Start, type allow remote access, and then click this option to set up.

• Product key is not accepted after the upgrade in Windows 7 Home Premium to Windows 7 Ultimate.

  I changed to a new computer that has windows 7 on it and I used my upgrade to ultimate but it will not take the proudct key.  I'm guessing that because he was on the old computer.  How do I just get a new key or change from the old computer?

  I think that I wrote the wrong computers had windows 7 Home premium top and I used my upgrade to ultimate on both.  However the new said that this is not a valid product key for the upgrade.  How can I just get a new key?

  Original title: I upgraded my computer to Windows 7 Ultimate, but it won't take my product key

  If the new computer comes with Windows 7 Home Premium or another edition of Windows 7, just use the Windows 7 Ultimate product key and do an Express Windows 7 Ultimate upgrade from in the edition of Windows 7 you are now running on the computer.

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and upgrade Express from Windows 7 to Windows 7 Ultimate edition. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

• Problem starting after the installation of the NTI Echo Satellite P50-B-11V

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Posted by marianbur
  

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Dear marianbur,

  New laptop having same problem here, is now stuck... Have you received still no solution?

  Greetz

• Network Controller Driver missing after upgrade Windows 7 Home Premium

  I recently installed Windows 7 Home Premium SP1 on my HP G71-340US notebook.  The installation went well except that when the computer is started, I found that the PC did not find any wi - fi connections.  After further investigation, I found that the network controller do not have a driver installed.  I downloaded the latest software of NIC driver on the HP website (via ethernet cable) and directed the pilot.  Updated the Realtek PCIe Controller Family driver, but the driver for network controller did not.  As a result, I could not even connect to wi - fi networks.  The information of the network adapter are listed below for reference.  Your help would be greatly appreciated to resolve this issue.  Thank you.

  Realtek PCIe Controller Family
  PCI\VEN_10EC & DEV_8136 & SUBSYS_306B103C & REV_02
  PCI\VEN_10EC & DEV_8136 & SUBSYS_306B103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  Network controller (\Device\NTPNP_PCI0019)
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086 & REV_00
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086
  PCI\VEN_8086 & DEV_0084 & CC_028000
  PCI\VEN_8086 & DEV_0084 & CC_0280

  You almost have it.

  With the information from the Device Manager, you can determine the vendor and device information:

  Network controller (\Device\NTPNP_PCI0019)
  PCI\VEN_8086&DEV_0084& SUBSYS_13158086 & REV_00
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086
  PCI\VEN_8086 & DEV_0084 & CC_028000
  PCI\VEN_8086 & DEV_0084 & CC_0280

  If you were to jump off of:

  http://PCIDatabase.com/

  what you see in Device Manager enter your information provider and device of the network controller and click Search:

  

  You can see that this device is very probably an Intel wireless device:

  

  This jives with This HP said about your system:

  

  If your wireless device is a part of Intel and Intel has a driver download page which has a driver update utility you can download (maybe on your desktop) and let it scan your system and see if it suggests a driver for you:

  http://www.Intel.com/content/www/us/en/support/detect.html

  It is generally not a good idea to use Windows Update to hardware device drivers (video, audio, network) because Microsoft does not know what are the best drivers for your system.  Always get material on the www of manufacturers if possible device drivers (if you want your system to work properly).

  If you ever see updates of hardware driver provided by Windows update that I would refuse them, and then hide them if you do not install the wrong drivers accidentally.

  Here you can see where I chose not to install and then hidden Windows updates for an NVIDIA graphics card since I know that they are probably not right and I know I should get only the right NVIDIA from WWW NVIDIA site drivers.

  Here you can see the updates that were offered, but I have not installed the and hid I don't see them yet:

  

• After a clean install of windows 7 Home premium 64-bit, dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.

  I have windows 7 Home premium 64-bit, which has totally collapsed.  By mistake, I installed my operating system 32-bit vista on it.  I bought a new windows 7 Home premium operating system and installed.  I did a clean install after formatting the hard drive [the did twice].  Now dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.  I saw the reference to System 32 on restart options.  Help?

  Original title: operating system 32 and 64 bit

  Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Find the website of your computer manufacturer support.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  How do you know if you have a 32 bit or bit 6 vrsion of Windows installed:

  http://support.Microsoft.com/kb/827218

  BIOS updates: you should check to see if there was one, or sometimes several updates BIOS for the motherboard. Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem. Read the instructions on how to your BIOS update/flash very carefully and be more you understand the process. There is a risk of a bad flash/update occurs which can make your system unbootable.

  Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• After the installation of Sierra, websites follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  After the installation of Sierra, Web sites started to follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  What are your privacy settings in Safari preferences.

  

• Computers on the local network does not show up after the installation of macOS Sierra

  Shared on my LAN Macs make their appearance is more after the installation of macOS Sierra. See the attached servers is checked in the preferences of the Finder and the computers appear in the list of DHCP clients on the router. I can see these computers to each other. Sharing is disabled on the computer of the Sierra. Any ideas?

  Thank you!

  p.s. I can not even 'go' to the IP address of these computers.

  Correction: I can afp: / and vnc: / to IP addresses (and so far as a temporary solution, I assigned permanent IP addresses in the router on all computers on the local network). Once I afp: on a local computer, it appears on the side bar of the Finder under shared devices, well I saw several times it appears and then disappears. Nothing has changed on the network since the installation of Sierra.

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?