HP ENVY 1350sf m6: m6-1350sf Windows 7 drivers

Similar Questions

• Windows 7 drivers for HP ENVY Sleekbook 6-1126sa

  Hello

  I have a HP ENVY Sleekbook 6-1126sa.  I need to have Windows 7 (not Windows 8). I installed Windows 7 (no UEFI). It's pretty simple. Now I find there is no Windows 7 drivers on the HP support site. HP support site advises to use Windows updates to update drivers or visit the manufacturer's Web site. Problem is I need an Internet connection to run Windows Update but cannot find the Ralink Wireless drivers. Looking for Ralink manufacturers website I find http://www.ralinktech.com/en/ (which States that the Ralink site merged with the Web of MediaTek site and one for pilots redirects to http://www.mediatek.com/_en/07_downloads/01_windows.php). Maybe somebody has an idea which driver I'm supposed to use? Updates of Windows actually work?

  Does anyone know if HP intend to provide Windows 7 for HP ENVY Sleekbook 6-1126sa laptop drivers (and indeed any other portable newly acquired)?

  Kind regards

  Keith

  Hello

  With perseverance and a bit of research I managed finally to find the remaining Windows 7 drivers (for all unknown devices).

  For anyone who needs to install Windows 7 on a HP ENVY Sleekbook 6-1126sa, follow is where I found the remaining device drivers:

  1.) Bluetooth controller:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en & CC = US & sp4ts. OID = 5229457 & swItem = ob_110019_1

  Ethernet controller 2) :

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  3 + 4) Both Bus SM & USB 3 controller:

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7

  A device of 5th (simply listed as PCI device) had become available after they have been installed. That ends up being:

  5 Realtek card reader.) :

  http://www.Realtek.cz/Realtek-download.php?Realtek=RTS5286 & System = 1

  Hope this helps someone.

  See you soon,.

  Keith

• No 1110ea audio envy 15 after installation of windows 8 64 pro

  No sound on my 1110ea envy 15 after installation of windows 8 64 pro.

  Maybe the audio drivers hp are repaced by victory 8 drivers?

  ass pls

  Hello

  Try the driver from the following link and see if it works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & DLC = in & softwareitem = ob-113849-1

• Windows 7 drivers for the Envy 17-j050ex

  Greetings,

  any body can help me to get windows 7 drivers for HP Envy 17-j050ex?

  Teboooo

  First perform the HP system recovery

  Install the new Bios

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=emea_middle_east&DLC=en&sw_lang=&product=5399950#N362

  Driver Windows 7

  Please install low top

  Intel® Chipset Device Software

  Intel Management Engine Interface (MEI) driver

  USB 3.0 driver: Intel USB 3.0 eXtensible Host Controller

  Framework of the HP software

  Intel Rapid Storage Technology

  HP Quick Launch software

  Driver Audio of IDT high definition (HD)

  Realtek LAN driver (Local Area Network)

  RALink 802.11 b/g/n WLAN adapter

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64082.exe

  RALink Bluetooth Softwaretreiber

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64156.exe

  Windows Update Setup

  Intel Smart Connect-technology

  HP CoolSense technology

  HP Support Assistant software

  HP 3D DriveGuard 6

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

  Synaptics TouchPad

  IRIS of Intel® and HD graphics Driver 64

  NVIDIA Geforce

  Multimedia software

  CyberLink Media Suite

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63340.exe

  CyberLink PowerDVD software

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63341.exe

  Software CyberLink Power2Go

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63285.exe

  CyberLink YouCam software

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63287.exe

  CyberLink LabelPrint software

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63286.exe

  Optional

  HP SimplePass Identity Protection software

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63474.exe

• HP ENVY m6-k010dx Sleekbook - Windows 7 drivers

  I have a friend who bought a HP ENVY m6-k010dx Sleekbook with windows 8 on it.

  I removed 8 and put on 7. I am looking for windows 7 drivers bluetooth and ethernet but can't find them.

  Can someone point me in the right direction?

  Hp machine support page lists only the drivers of windows 8.

  Hello:

  You need this ethernet driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105075-1&cc=us&DLC=en&LC=en&OS=4063&product=5282147&sw_lang=

  You need this driver BT...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_130390_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Envy 15-c101dx: 8.1 Windows reset always available after upgrade to Windows 10 and refreshment?

  I tried to troubleshoot and fix a driver of hareware problem that was discovered after doing the upgrade of Windows 10 Windows 8.1. Before updating my system, I was warned by the software that I would not be able to return to Windows 8.1 if I did the update with the upgrade of Windows 10 still installed. My question is if Windows 10 also stop me from going back to Windows 8 if I did a reset of the system?

  I played it safe and restored back to 8.1 for Windows before you reset this time, but this will delay upgrading me to Windows 10 in confidence (1 month to try it is not a lot of time).

  Hi @hyjiad.

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY x 2-computer laptop 15-c101dx and concerns with the Windows 10 upgrade. It shows me that your system is compatible with Windows 10 drivers. It tells you which driver he would have a problem with?

  The best I can offer at this point is to create your a HP recovery USB drive.

  Here is a link to Windows 10 FAQ. It gives you that Go Back is a feature that will restore your computer to the old operating system that was installed before you upgraded to Windows 10 for only 28 days. But with your recovery USB disk you can do at any point and time.

  I hope this helps you.

  Thank you.

• HP Envy x 2 Version of Windows 8 operating system

  Hi all

  Does anyone know if envy X 2 comes with Windows 8 home or Windows 8 Pro. ?

  If it comes with Windows 8 home, so you know if it can be upgraded for Wondows Pro 8?

  Thank you all

  James

  8 32-bit Windows. no option to select other OS in the personalization page. can be upgraded to win 8 32-bit pro with upgrade at any time.

• I need 64 bit Ultimate Windows 7 drivers for HP ENVY 17-J8L28AV

  I need 64 bit Ultimate Windows 7 drivers for HP ENVY 17-J8L28AV.  Drivers on the website of HP for Windows 7 won't work properly or activate the WiFi on the laptop.

  You are the very welcome.

  You need the driver for this device...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131788-1&cc=us&DLC=en&LC=en&OS=4063&product=7174494&sw_lang=

• HP envy 17 can not boot windows or using recovery DVDs after the replacement of the motherboard

  Hi all, I need your help

  first of all sorry for my English but I'm from Greece. I really don't know a lot about the mobile only very basic computer.

  I have a hp envy 17 3d 2080en with windows 7 Home premium which, after overheating, chips to the motherboard. I ordered and installed a used motherboard from China (part 630793-001 hp number).

  After that I tried to start the laptop, but when he opens he said probably due to the change of the material he cannot start windows normally. After reading a lot on the internet, that I tried using the recovery DVDs I had prepared before the problem, but they will not start just yet. Then, I tried to use the cd system repair but again no luck.

  I looked in the bios as some people say on the internet and realized that the product number and serial number are different from those of my laptop and it's maybe part of the problem, but I don't know. I looked in other posts about similar problems, but did not get a definitive answer and this is why I post for your help.

  Thanks to you all

  Nikos

  IF YOU HAVE AN HP LAPTOP (MINE IS HP ENVY 3D 2080EN) THAT YOU HAVE CHANGED THE MOTHERBOARD WITH ANOTER ONE (MINE WAS FRIED OVERHEATING) AND AFTER REPLACING YOUR LAPTOP DOES NOT START AND YOU CAN'T FIX IT WITH SYSTEM REPAIR DISC OR DOES NOT PERFORM A CLEAN WINDOWS INSTALL OR DON'T LISTEN NOT A RECOVERY CD/DVD RECOVERY THEN EXPERTS HP WHO KNOW NOTHING. LOOK IN YOUR BIOS, AND IF YOU SEE THE PRODUCT NUMBER OR SERIAL NUMBER DIFFERENT THAN THOSE APPEARING ON YOUR COMPUTER (USUALLY IN THE BATTERY COMPARTMENT) THEN GO TO A HP SERVICE ALLOWED AND TELL THEM TO HAVE YOYR TATTOOED BIOS. WITH THE TATOO (COST US $ 40), THEY WILL REPLACE THE NUMBER OF BAD PRODUCT AND/OR THE SERIAL NUMBER WITH YOUR MOBILE PHONE NUMBERS AND YOUR PROBLEM IS SOLVED. MY MOTHERBOARD HAS BEEN FRIED TO OVERHEAT AND I BOUGHT A USED ONE FROM CHINA. AFTER I REPLACED IT THE LAPTOP WOULDN'T START AND WOULD NOT ALLOW ME TO REPAIR DVD HE OR EVEN THE USE OF RECOVERY. I CALLED HP SUPPORT, I EVEN JOINED THE HP FORUM TO ASK FOR HELP AND I GOT ONE EXPERT WAS USUALLY TRY THIS OR TRY THIS. DON'T LISTEN TO THEM. FINALLY, I READ AN ARTICLE FROM THE INTERNET THAT EXPLAINED THAT WHEN YOU CHANG THE MOTHERBOARD / SYSTEM BY ANOTHER THEN THE BIOS REFERS TO THE NEW PRODUCT NUMBER, MOTHERBOARDS AND/OR THE SERIAL NUMBER AND THIS WAY THERE IS INCOMPATIBILITY WHICH DOES NOT ALLOW WINDOWS TO START, YOU CAN NOT REPAIR WITH SYSTEM REPAIR DISC OR IT DOES NOT PERFORM A CLEAN WINDOWS INSTALLATION OR A RECOVERY CD/DVD RECOVERY. ONCE YOU TATOO THE BIOS THATS IT. THE LAPTOP WORKS. I HOPE THAT THIS MESSAGE WILL HELP SOME PEOPLE WAISTING THERE TIME AND SPEND THE MONEY FOR NOTHING

• 15 x 360 PC envy: laptop TrackPad control with Windows 10

  I have a new envy 15 x 360, running Windows 10 (64 bit, core i7).  I found it very hard to type with the big TrackPad / device control area constantly taking the cursor outside or make selections in an unexpected way.

  Is there a way to easily transform the Trackpad on and outside?  Some laptops have a shortcut key - I have not found one for this one.

  Hey @LukeB,

  What happens if you go to the properties of the mouse?

  Not the mouse settings.

  Thank you.

• I want windows 7 drivers for like 4-1209tx

  Hello

  I got HP envy 4-1209tx for windows 7 and now I can't installed most of the drivers for it. Most propably I want wireless drivers of it. Someone help me please this questions. If HP does not support windows 7 for that, could you let me know all drivers wireless compatible/suitable for her.

  Hello

  Please try Windows 7 drivers for envy4-1000 series:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5264177&prodTypeId=321957&prodSeriesId=5260474&swLang=13&TaskID=135&swEnvOID=4063#11395

  Good luck.

• Windows 7 drivers for hp h8 - 1419

  Hi, I recently bought a hp envy h8 - Office 1419. I am overall very sattisfied, but couldn't handle windows 8, so I tried to install windows 7 instead, and ultimately there is no avaible driver from the hp Web site. If you have drivers for windows 7 compatible with my pc or at least with the materials I would like their list if possible because what about now im stuck between return to windows 8 who, with that really, I'm not going along with a new pc, unable to do anything. THX in advance

  WARNING *.

  HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You should ENABLE 'Secure Boot' and maybe 'Legacy Support' in the 'BIOS Setup boot secured' on the settings page below, before you try to install Windows 7;

  

  In addition, as the hard drive is partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" in the start menu "F9". If "UEFI - CD/DVD drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest to use a disc of Windows 7 SP1 for the best installation experience. If you need a Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive.

  Here are the specifications of your desktop HP ENVY h8-1419. For your model, HP seems to provide that drivers of Windows 8. Most of the Windows 7 drivers for the page of CTO drivers of HP Pavilion HPE h8 desktop PC - 1240t should work on your computer from HP h8-1419.

  If you have missing or unknown devices after installing the drivers above, thanks for posting the "Hardware ID" Device Manager for devices as shown below;

  

  Please click the White Star of KUDOS to show your appreciation

• Windows 8 on Windows 7 drivers

  I want to downgrade by Hp Envy DV6-7211TX of Windows 8 for Windows 7. But the HP driver support page does not list the specific drivers of windows 7. Is it possible to use the Windows 8 drivers and install it on Windows 7

  Hello:

  In case you want to install W8 on again your laptop or your downgrade to W7 64 bit does not work as expected, as there is no W7 first make your set of recovery media W8 x 64 driver for your HP laptop support.

  Check out this guide on how to do this.

  http://support.HP.com/us-en/document/c03481733

  Then, you must change a setting in the BIOS of your laptop to be able to install and run W7x64:

  http://support.HP.com/us-en/document/c03736054

  You should be able to use all the W7 x 64 drivers and software of the dv6t-7000.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5273547#N474

• Pavilion 15-p108ne: my computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  My computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  Hello:

  You should be able to use the W7 x 64 drivers and software of p000-15 t on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

• Windows 7 drivers missing HP Pavilion 23

  Hi all I'm looking to do a fresh install of Windows 7 on a HP Pavilion B090EA 23 but miss me the drivers for
  Ethernet controller
  Network controller
  PCI device
  Controller PCI simple comms
  USB controller
  
  Any advice on where to find the windows 7 64 bit drivers appreciated!

  It seems that the HP TouchSmart 23-1014 uses the same motherboard as your 23-b099ea and uses updated for Windows 7 drivers. Please use the drivers located HERE.