HP ENVY 15-J104EL upgrade

Similar Questions

• HP Envy 15-J104el: Periferiche sconosciute knew HP Envy 15-j104el - peripheral unknown

  English:
  These are the unknown devices:
  http://brain89.altervista.org/Periferiche_sconosciute_HP_Envy.PNG

  I have Windows 64 bit Pro 8.1 and connected to my laptop it is just a USB hub, a mouse and a keyboard that works perfectly

  Italian:
  Salvo sewn questo post in merito ad a problema del mio HP Envy 15 - j104el, this sound system 2 periferiche sconosciute ed una che funziona not correctly, ecco uno che screenshot makes meglio Torino
  http://brain89.altervista.org/Periferiche_sconosciute_HP_Envy.PNG
  You can help a risolvere?
  Ho 8.1 Windows Pro 64 bit e periferiche pc sono hotels al con UN hub mouse e una tastiera perfettamente rilevati e funzionanti.

  Hello @Matrix89,

  Thanks for the quick response!

  Try to review the following resource and let me know if you have a bit of luck:

  How to find drivers for unknown in Device Manager devices (Not a HP website supported).

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• mSATA on HP ENVY 15 - j104el

  Hello

  can I put an msata module in my HP ENVY 15 j104el?

  Yes, just replace with the SSD HARD drive,

  Through 5, 26, 27, 46-48 page in the manual.
  You can put 2.5 "SATA, 7 or 9.5 mm thick, SSD.

  Use the cloning/migration tool that comes with the SSD or FOSS as Macrium Reflect free to enter any SSD HARD drive before replacement.

• Envy 15-j104el: updated NETWORK WiFi card and RAM update

  Goodmorning to everyone

  I write this post to ask for information on the possibility to do an upgrade of hardware on my HP Envy 15-j104elsystem.

  That's what I would do:

  -Replace the network card (NIC) to a wireless better and possibly with a compatible AC NIC.

  -Update to 16 GB of ram, put benches with CL9 SODIMM

  The questions that I want to bring to your attention are:

  -There is a 'white list' for the wifi card on my BIOS (actually F66)?
  (consultation with the service manual there are little NIC OEM selled, y at - it ONLY compatible?)

  -Put the sticks of ram CL9 (instead of CL11 currently OEM mounted), I can inprove the overall performance?

  I want to install are:

  -Intel Wireless-AC 7260 more Bluethoot HMC 4.0

  
  -Kingston HyperX Impact DDR3L 16 GB (2x8gb) SODIMM 1600 Mhz CL9 (Kit)

  According to your experiences, is it compatible? I can buy them without any problem?

  Thanks in advance to anyone who can help me. Thanks for your suggestions

  In particular, I take this opportunity to greet and also need the help of my friend @visruth ;)

  1. no whitelist. Your laptop was conducted after HP stopped using a white list so that you can install any card with the right form factor and the number of antennas. The Intel 7260 card should work.

  2. you can install the CL9 memory but it will not do anything all run faster. The motherboard is made to operate at the speed of the OEM memory so the Kingston Hyper-X will work, but the specifications of it in operation will be the same as memory OEM.

• HP Envy 13-d001no: upgrade SSD on a new HP Envy 13 m2

  Hello!

  I just got my HP Envy 13-d001no. As I expected I really enjoy them until now, but I am interested the upgrade to a faster SSD with more storage on this subject. I'm looking at two different drives, namely the Samsung 850 EVO m2 and the Samsung PRO 950 m2. Both drives are m2 (2280) form factor, but they differ in that the EVO 850 uses a SATA 6.0 Gbit/s-interface while the PRO 950 has a PCIe interface.

  I am not fully aware of the differences between these interfaces. I know that PCIe allows faster speeds, but they are both compatible with the new HP Envy 13? I find anywhere which interface is the exact shape of the SSD factor currently installed and I don't want to take the risk of buying a new drive only for him is not to adapt or not to work on the laptop.

  According to the HP ENVY laptop (model numbers used: 13-d000 through 13-d099)-Maintenance and Service Guide of, this model supports the following:

  SSD drive
  Serial ATA M2 storage
  Support for the following SSD drive configurations:
  512 MB M2, SATA-3, support triple cell level (TLC)
  256 MB M2, SATA-3, support the TLC
  128 MB, M2, SATA-3, support the TLC
  128 MB, M2.2280, SATA-3

  On this basis, it would seem that the Samsung 850 EVO m2 is the correct upgrade for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP envy 14k011tu: to upgrade graphics card

  My laptop is Hp Envy 14k011tu. It has a graphics 4400u graphics card intel which is quite bad for the games. I wanted to upgrade. Then someone can suggest som egud graphics cards under $ 100.

  Concerning

  Mehul_Mishra

  Sorry, but you operate in a misunderstanding.  Your PC is a laptop computer and, unlike desktop computers, it uses no graphics "cards".

  Instead, it uses graphics 'modules' - and what makes these different, is that they involve the graphics chip is soldered to the system board.  This means that you will need to disassemble the entire PC to replace the motherboard just to change the graphics chip.

  This would have to do to an HP Service Center - which means that it will cost you easily several hundred dollars, maybe more replacement laptop in its entirety!

  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray

• Want to 13d061sa: the HP Envy 13d061sa SSD upgrade

  I have a HP Envy 13d061sa, laptop 13.3 inch with 256 GB SSD drive. I was wondering if it is possible to upgrade to 1 TB drive. Also is it extensible owner?

  Thank you

  It is not a replaceable part by the user, so no, not owner replaceable, unless the owner didn't mind accepting complete responsibility for the damage done to the laptop.

  Ensure that you buy the right type of SSD for your notebook. I would say a 512 GB is probably a bertter option.

  A video at the following library shows how to replace the SSD.

  http://h20574.www2.HP.com/results.htm?SID=7771341&MEID=43D6ECEE-16B2-4D6C-8D37-22214010F45D

• Envy 15-j151sa: upgrade Hp Envy 15

  Hello, I think the upgrade of my Envy 15 - j151sa AMD A10 8 GB ddr3 RAM 1 TB SSHD to its maximum.

  I think that to upgrade to SSD, so what is the maximum it can handle if even possible?

  He manipulates ddr4 RAM? If not, what is the maximum ddr3 RAM and RAM speed it can handle?

  Is it still useful to upgrade?

  Thank you very much

  Hello

  1 1 TB SSD should be ok, the vehicle currently has a slow HARD disk: 1 TB 5400 RPM SATA, upgradeing to SSD will help a lot:

  http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/5401187/model/7255485/document/c04372563/

  2 No, DDR4 RAM does not and will not, work

  4. it supports th after configuration, 1600 MHz max.

  Two customer accessible/upgradable memory module slots
  Support for dual channel DDR3L (1600 MHz)
  Support up to 16834 MB of RAM in the following configurations:
  ● 16834 MB (8192 MB × 2)
  ● 12288 MB (8192 MB + 4096 MB)
  ● 8192 MB (8192 MB × 1, 4096 MB × 2)
  ● 6144 MB (4096 + 2048 MB)
  ● 4096 MB (4096 × 2048 MB × 2, 1 MB)

  For the last question: SSD and RAM more will give new life to your machine.

  Kind regards.

• HP Envy x 360: upgrade Windows 10 - date license expiration

  Hello

  I'm anticipating the upgrade to Windows 10 on my Hp Envy x 360, but I hesitate. The current license for Windows 8.1 does not expire over time, but Microsoft says that Windows 10 is only free for the first year.

  Could someone give some sort of guarantee that I won't have to pay for Windows 10 next year? Otherwise, I would feel really ripped off the coast.

  Thank you

  Alex

  I just wanted to add some more info to this. What follows is the issues of Windows 10 which can be found here: http://www.microsoft.com/en-us/windows/windows-10-faq

  The upgrade is really free?

  Yes, it's free. It is a full version of Windows, not a trial version or initiation. It is available for a limited time: you have one year from the time 10 Windows is available to take advantage of this offer.

  Can I reinstall Windows 10 on my computer after the upgrade?

  Yes. Once you have upgraded to Windows 10 using the free upgrade offer, you will be able to reinstall, including a clean install on the same device. You will not need to buy Windows 10 or return to your previous version of Windows and upgrade again.

  You will also be able to create your own like a Flash DRIVE or a DVD installation media and use it to update your device and reinstall once you have upgraded.

• Envy 15-j010sr: upgrade CPU on the Envy 15-j010sr

  Hello world. Can I upgrade my processor i3 (4000 m) on the Envy 15-j010sr? Maybe this 4700mq 4940mx i7 or i7.

  In a Word, Yes. This is the top of the page for your motherboard processor:

  Intel Quad Core i7-4900MQ 2.80 GHz processor (up to 3.80 GHz turbo SC; 1600 MHz FSB, 8.0 MB cache L3, 47 W) 723523-001

  See page 24 of this manual here:

  Manual

  The l7-4700mq is also a possibility.

  You have the HM87 chipset.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Envy 15 t: upgrade memory and hard drive HP ENVY 15t

  Hi guys, I just bought the HP Envy 15 not touch t (ae100) with the following characteristics:

  -CPU & graphics: 6th generation Intel Core i7-6700HQ Quad Core processor + Intel HD Graphics 530

  -Memory: 8 GB DDR3L - 1 DIMM

  -Hard drive: 1 TB 5400 RPM hard drive

  I have a few questions about it. First of all, my laptop doesn't have a vacant unit of m2 where I can insert an SSD and if not a SATA 3 2.5-inch SSD fits instead of the hard disk without additional fixing or need support.

  Second, is there an empty memory slot to insert a 8 GB of additional ram.

  Any kind of assistance will be extremely useful and thanks in advance.

  No crack m2. From the Manual:

  Only dedicated support of storage SATA m2 (Port 0) (models with i7 processors and 4 GB memory graphics)

  So if you have Intel HD video only you do not have a slot m2.

  Here's the manual for your use:

  Repair manuals

  Yes on the memory 8 GB 2d module:

  Both not accessible/upgradable module DDR3L-1600 slots double channel memory support 16 GB of RAM in the following conƭgurations ● 16384-Mo (8192 MB × 2)

  Access to the memory and hard drive are obtained by removing the lower cover. Technically this is not allowed to the end user if security is jeopardized.

  A standard 2.5 inch SATA SSD to integrate perfectly in the original hardware for hard disk 5400 RPM. It is a highly recommended update. The 16 GB of RAM not so much, but it's one of those things "might as well" If you are determined to go there.

  Let us know if you need more information.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• E6Z92EA #ABV: Hp ENVY DV6 RAM upgradation

  I WANT to HP DV6 notebook and I am running Windows 10 (64-bit). I have a lot of graphics and programming of the software installed on my computer that make more and more slow. I have Intel (r) Core i7-3610QM CPU @ 2.30 GHz 2.30 GHz processor.

  Now, I want to upgrade my RAM which is currently about 4 GB to 8 GB or more, I guess.

  Kindly help me in this regard RAM suits me 8 GB or more? And how do I upgrade my RAM? Can I do it myself or I have to take my laptop to HP Center?

  Thank you.

  Hello

  The Service Guide says:

  Customer-accessible/extendable two slots for memory module
  Dual channel DDR3 1600 MHz support up to system 16384 MB RAM supports the following RAM system
  configurations:
  ● 16384 MB (8192 MB × 2; not supported on models of computer with the 32-bit operating system)
  ● 12288 MB (8192 MB × 1 + 4096 MB × 1; not supported on the computer models equipped 32-bit operating system)
  ● 8192 MB (8192 MB × 1 or 4096 MB × 2; not supported on models of computer with the 32-bit operating system)
  ● 6144 MB (4096 MB × 1 + 2048 MB × 1; not supported on the computer models equipped 32-bit operating system)
  ● 4096 MB (4096 MB × 1 or 2048 MB × 2)
  ● 2048 MB (2048 MB × 1)

  Several manuals:

  http://support.HP.com/us-en/product/HP-envy-DV6-notebook-PC-series/5330549/model/5443093/manuals/

  Please use the following little tool and open SPDtab, it will show you all the information you need including what brand.

  http://www.cpuid.com/downloads/CPU-z/CPU-z_1.72.1-en.exe

  Kind regards.

• New model: HP Envy 15 t Upgrade HD SSD or mSATA SSD?

  Hi all

  I read several threads on the upgrade of the disk for SSD and it seems that everyone else has managed to do.  My question is, is there an advantage to upgrade to an SSD HARD drive or simply add in mSATA SSD?  I currently have a network drive that contains most of my data such as music, photos and videos, so I don't think that I need more capacity on my hard drive.  That being said, I had planned on buying an SSD of 256 / 240GB, it's just a question of which one get? a regular SSD or mSATA SSD?  Thoughts?  Comments?  Concerns?

  Mike Lee

  on a side note: I envy 15 new t... I really wish that they would have changed the name of the template to something completely different because the prefix is the same as their old model... stupid...

  Get a 2.5 inch SATA SSD ordinary. Very slightly slower than a WSSD but still much faster than anything else. Try to configure the WSSD as boot drive is a huge problem.

• HP envy 17-J173CA UPGRADES

  Hi, I have a hp envy 17-J173CA with an i7 2.4 screen 17', ge force gt740m 2 GB, 12 GB ram, 1 TB hd, refurb.
  I couldn't find the manual on the net and is entered in the box.

  So, I want to know the improvements that it allows to better understand, hard drive? graphics card? memory? How does it work?
  Especially since it allows a graphics card upgrade, I had read that the more portable have the soldered graphics card in the motherboard. If this is the case of my own, I change the motherboard with the graphics card to upgrade? How does it work?

  Thank you!

  Yes, memory can be improved to 16 concerts to throw the 4 GB memory module and its replacement by a second 8 GB module. It's the DDR3L-1600 (memory low voltage).

  http://www.crucial.com/USA/en/ct102464bf160b

  You already have a hybrid 1 TB drive and there is not much, you might install which would be an upgrade, that, except maybe an SSD. You do not have 2 hard drive bays and you can add another hard drive with the appropriate cable caddy found here:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

  Pages 42 and 43 of the manual have the hard drive and memory installation instructions. And then there is this video:

  https://www.YouTube.com/watch?v=wx3dMGXrGCc

  Other updates are not really profitable, but the motherboard and processor could be replaced, giving you a stronger video. However, the gain would be very low and the enormous cost.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.