HP envy 15-j140na: maintenance of fan for a hp envy 15

Similar Questions

• I'm looking for a fan for laptops Toshiba control utility

  Hello

  I'm looking for a utility to control the fan for computers laptop toshiba (like i8kfangui for example).

  someone help...

  Hello

  Toshiba does not provide special also for the fan control.
  Only the Toshiba Power saver is available on the page of the driver.
  This utility controls the settings for the processor, processing speed, the cooling method, display brightness, etc.

  Maybe it s an option for you

• FAN for dv7-6051er p/n LR166EA

  Hi all!

  Please,

  Can tell me what is p/n computer FAN laptop dv7-6051er. Product number, LR166EA?

  Specifications (http://support.hp.com/us-en/document/c02763341):

  Chart AMD Radeon HD 6770M (1 GB DDR5)

  BUT in manual (http://h10032.www1.hp.com/ctg/Manual/c02842278.pdf) has been to 3 p/n FANs:

  1. For use only with the computer models equipped with an Intel processor and a graphics subsystem with 2.0 - GB memory discreet 653627-001
  2. For use only with models of computer with a processor Intel and a graphic subsystem with UMA memory 653628-001
  3. For use only with the computer models equipped with an Intel processor 640903-001

  Which one of the three?

  I think 640903-001 653628-001, but I'm not sure.

  Thank you

  McSim wrote:

  Hi all!

  Please,

  Can tell me what is p/n computer FAN laptop dv7-6051er. Product number, LR166EA?

  Specifications (http://support.hp.com/us-en/document/c02763341):

  Chart AMD Radeon HD 6770M (1 GB DDR5)

  BUT in manual (http://h10032.www1.hp.com/ctg/Manual/c02842278.pdf) has been to 3 p/n FANs:

  1. For use only with the computer models equipped with an Intel processor and a graphics subsystem with 2.0 - GB memory discreet 653627-001
  2. For use only with models of computer with a processor Intel and a graphic subsystem with UMA memory 653628-001
  3. For use only with the computer models equipped with an Intel processor 640903-001

  Which one of the three?

  I think 640903-001 653628-001, but I'm not sure.

  Thank you

  Hello

  I guess 640903-001 is the right fan. Your laptop is equipped with a processor Dual Core and with 2 GB of memory dedicated graphics chips are in the works for Quad Core processors. Heat sinks / fans for Quad Core processors are more powerful and maybe more, so I think that this statement: "for use only with models of computer with a processor Intel 640903-001" should be "for use only with models of computer with an Intel Dual Core processor 640903-001". Your graphics card is certainly not a UMA shared one, so the third option is more likely to be good.

  http://www.laptop-donor.com/shop/CPU-Fan-Heatsink/3846-HP-DV6-CPU-Fan-Heatsink-641477-001-640903-001.html

• HP ENVY 15k011tx: fan for laptop

  The internal fan of my laptop is not turning at high speed all in game. It seems that it runs at a constant speed all the time. When I bought it, the speed of the fan used to vary from time to time. Also faced with problems of delay all in game. I think that I am facing issue after upgrade to windows 10.

  My BIOS is updated to the latest version. (F43)

  Also using HP coolsense 2.2.Although is no coolsense for windows 10 to site support and drivers hp for my product. I use the software for windows 8.1 coolsense

  Can it be a BIOS problem? What could do? Are there different methods to diagnose the fan?

  These temperatures are not excessive.

• G4-1342tx Pavilion: replacing the fan for g4-1342tx

  Hello.

  I am looking to replace my old fan with a new one but found difficulties which fan is compatible with the heat sink.

  I found the replacement for a g6-2000 that looked quite similar, but I do not know...

  I am outside the United States, if ebay or newegg is a no go.

  Thank you.

  Hi there @Juviegar

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I looked in the information you asked for your fan and compatibility with the heat sink. Here is a manual that I found called HP G4 Notebook PC - Maintenance and Service of Guide, please refer to page 25. It gives you the part number for the fan is for your laptop. Also, here's a document called order HP certified spare parts. This document will walk you threw how to order this part at HP.

  Please follow these documents, re-post and let me know how everything went.

  I hope this helps!

  Have a great day!

• Clean the fan for Tecra A50

  Hello

  My fan is running constantly and reports Health Monitor problem fan. How do the fan? Where can I get a service manual?
  I followed the instructions to blow air from the outside - as expected this didn t work
  PS: (if the only answer is that there is no repair and to communicate with a partner who will be my last Toshiba of a pro model and its price I was expecting a little bit more)

  thx for your answer

  Oliver

  Service Manaual is not a public document and not the free download.
  I'm sorry if this will be your last Toshiba but don't be sure that another manufacturer will give you service manual. No one will give you such document.

  Laptops have a specific design and it's pretty easy to damage something. This is the reason why the dismantling procedure should be performed by authorized personnel only. When you buy TV, auto or something else, that no one will give you the service manual.

  Of course, you can do with your laptop all you want but on your own risk.

  Have you tried to remove the dust with compressed air.

• Replacing the fan for Satellite/Equium P300-190

  Hello

  I am looking for replacement for toshiba equium p300-19O satellite cpu fan and I found this one an ebay working http://www.ebay.co.uk/itm/New-Toshiba-Equium-P300-Original-Genuine-Cooling-Fan-Thermal-Module-/120842473542?pt=UK_Computing_Other_Computing_Netwo & hash = item1c22c5d046 is slightly different, and then inside my computer laptop.

  Can I use it? Thanks in advance for your help.

  Hello

  As you can see in the picture is written: Image for illustration purposes only.
  I guess you can buy good cooling fan.

  I just hope you can disassemble your P300 correctly. Be careful with holders and small plastic parts.

  Good luck.

• Problem with fan for laptop!

  Hello, I bought a HP 2000-2b43dxbefore 15 days and I am sneaking suspicion there is problem wih fan / air on my laptop.

  When I turned my laptop first and next 2-3 days, my fan was silent until I couldn't hear his work so its normal because when I turn the laptop there is no operation takes this fan needs to cool the components.

  After using my laptop for 3-4 days I have noticed that my cooling fan starting immediately when I turn laptop and fan so it is quieter as the first 2-3 days. So my fan always cools, I can feel and hear, no matter what I do on my laptop. When I closed all my apps, the fan is still cooling for a long time. is this normal if I use the laptop only for internet and we know that the internet doesn't cause components to heat.

  I have a photo of the user manaul, where we can see that fan to turn on and off successively during the routine operation, but my fan is almost always on. Here is picture

  Have the fan lights is usually automatic. Depends on the laptop to the extent that utility controls the cooling fan.  My current product HP Envy17-3002ea a HP CoolSense book loan, but not all laptops have it. Some portable cooling is controlled by an algorithm in the BIOS ROM, which is based on the temperature ramp (delta) in the motherboard and CPU.

  The fan come on your laptop starting up is quite normal. If the temperature is too hot the CPU turns off as self protection.  There are a number of Programs utility we can use if we're slightly paraniod on the temperature of the processor of the laptop, but so general, it is not really much to worry.

  Best regards

  ERICO

• I need a heatsink / fan for p7-1254

  My office gets really strong and I need to replace the fan and, possibly, the heatsink, but I do not know what to look for. Can you help me?!

  Here it is on eBay:

  http://www.eBay.com/ITM/HP-P7-desktop-CPU-cooling-fan-heatsink-644724-001-/360760738117?PT=LH_DefaultDomain_0 & Hash = item53ff040145

  REF. 644724-001

  HP is out of stock at the partsurfer

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Fan for Satellite 2410 404

  Hi all

  the CPU of my 2410-404 Sat fan broke down. I can't seem to get a spare, dealers appear to be out of stock or not will ship to continental europe. I even searched for similar radial fans but so far no luck.
  Someone at - it a tip for me to know where to ask for this particular spare part? Part code is GDM610000063.

  Thanks in advance, the impatience on your part!

  Best regards
  Ben

  Hello

  I found a fan which should be compatible with your device.
  Please check this one:
  http://www.sparepartswarehouse.com/Toshiba, Laptop, P000347550.aspx,

• 850 - 009na M1Z34EA #ABU: CPU fan for the 850-009na feel like Phoenix does not turn down after the power - on self test unless the BIOS is entered

  Hello

  I have posted responses to other posts on this topic, but thought I'd start a new thread to gather my conclusions. I'm sorry for a trial

  This PC is virtually brand new (only a few weeks now) and otherwise perform exceptionally.

  Basically, if the machine is disconnected from the power grid (i.e. the power is off at the plug or the power cord removed), when the machine is supplied then the CPU fan turns over 2000 rpm and stays there. All the other PC that I do this too, but the fan will slow down after turning upward. I know that this is done as part of the POST to check that the fan is running.

  If I go into any installation of seed, start-up or BIOS for example (i.e. by pressing ESC or F10 etc.), the fan will slow down immediately up to 700 rpm. It will stay like that until the next time the machine is started against the cold. If I shut down the PC - watch or stop - but do not cut the power supply, then the next time the machine is started, the fan is still about 700 rpm. It is not to turn up to 2 k + RPM when lit.

  As soon as I unplug, then the next time the PC boots, it will turn to the top and I have to repeat steps - off, boot, enter the BIOS, exit and continue. It is something to do with the cold start.

  Note that I don't have to do anything in the start menu - I for example go to the BIOS settings, exit without saving the changes, and the fan will still slow. It's going in the boot sector that slows down the fan.

  When the PC started out-of-the-box, I opted for the upgrade to Windows 10 during installation. I have read in various places that people had experienced after the upgrade, so I reset the machine to factory settings (Win 8.1) and have not upgraded, but the problem persisted. However convinces me that Windows 10 has been removed completely, as when I went to restore the backup image (i.e. dating back to what I had before the factory reset) there are references to 10 Windows (for example, it says 'Continue to Windows 10' as well as various food options). I do not understand UEFI so I don't know if that was involved.

  I tried to change the power plan options "Processor power management-> cooling system strategy" on the liabilities side, but no joy there.

  I think that the fan and sensors work, based on the findings below. These readings of temp and fan are taken from AIDA64

  After starting cold (current was cut, without entering the BIOS), machine runs dry without load

  

  Exactly the same thing--starting in cold, but go in the BIOS, do nothing and continue. Once again, no load

  

  This is after power off and resarting, but to let the PC network

  

  After the above, I used Prime95 to put the CPU support (use of 95-100%), and after an hour, the readings are:

  

  Note that even so, the fan was not particularly strong, but it's at 2222 rpm as in the first reading.

  If I play at 4K (the whole point of the PC ) the CPU so far got very warm, the GPU is but his fan turns up as planned.

  In conclusion, it seems that the POST has a problem because it does not slow down the fan after the test.

  I can live with let the machine always plugged into the sector (for example, most of the time) and I guess that's what most people do, but I would like to know what the problem is (for example if it's really something 10 Windows, or a bug in the BIOS/UEFI)

  Thank you very much!

  John

  Explain you a lot of people who maybe have returned their system immediately because of this? Others might judge normal sound. Not irritable average is not coming here to complain. Others might judge her so little. They simply don't like. You will never convince me that is not a BIOS problem. As the problem resolves itself when you enter manually each time. It can be reproduced every time.

• 15-R030SQ HP: HP 15-R030SQ has a heater / fan for the processor?

  Hello guys, I have a computer laptop 15-r030sq Hp and I think that this model do not have a fun / cooler for the CPU but I need an answer from someone that disassembling this laptop. Thank you

  He has a fan

  See article 13 page 19 in the list of distribution of the parts shown in the following book.

  http://h10032.www1.HP.com/CTG/manual/c04409502

• Replacing the fan for w/15.4 "screen and GPU integrated T60

  Greetings,

  The combo fan/heater several months ago, I bought for my T60 was apparently the 41W6409 for a T60 with discreet gpu and cpu, but mine is an integrated model that uses the 41W6408.

  As I can't return it, I was just thinking to replace the old fan with that on the new heatsink. But I'm not sure that it will fit, being the only FRU I could find for the Fan/Heatsink combo.

  So, I was wondering if someone here who happened to know if these fans are the same.

  Thank you very much in advance.

  Steve

  Skater wrote:

  Greetings,

  The combo fan/heater several months ago, I bought for my T60 was apparently the 41W6409 for a T60 with discreet gpu and cpu, but mine is an integrated model that uses the 41W6408.

  As I can't return it, I was just thinking to replace the old fan with that on the new heatsink. But I'm not sure that it will fit, being the only FRU I could find for the Fan/Heatsink combo.

  So, I was wondering if someone here who happened to know if these fans are the same.

  Thank you very much in advance.

  Steve

  Steve, you can use the unobtrusive radiator on your integrated motherboard. In fact, the best option in my opinion is to go with a T61 heatsink that is designed to cool the much more powerful X 3100 graphics and uses the thermal paste rather than pads type blade of silicone used to cool graphic systems T60. Alternatively, you can replace these pads with thermal paste on the heatsink T60 but unity T61 is better in my opinion. I can't tell you if the fans are interchangeable, because there was more than one fan used on the T60 models intel, some were, and some were not. There was also a discreet couple different sinks of heat, but will be more than enough for the cooling of your integrated graphics. Platform which cools the discrete gpu will not be used so it isn't a problem and cooling chipset platform will suffice for the cooling of your integrated graphics.

• ThinkCentre S50 8183-D7G and fan for the power

  small question for the experts!

  My thinkcentre S50 8183-D7G have a fan on the back of the power supply... but I never noticed it running.

  No fan of led thermal probe power supply or must run about?

  TP-FanControl program for the Thinkpad, Thinkcentre such program are also?

  Thanks a lot for any input!

  Default cooling fan is RESOLVED.

  My Thinkcentre ran a year of non-stop 24/7 without fan!

  ThinkCentre rules!

• Manual maintenance and parts for C2N34UA

  I just buy this laptop auction, but information on it is like finding teeth of the chicken (which probably betrays my age & geographical origins).

  It is a 2000-2B80DX - C2N34UA 15.6 "laptop. I can't find information on the date of manufacture of that computer, but since it has Windows 8 I guess, it's a relatively new model that could explain the rarity of a maintenance manual.

  Before the tear in there, I was hoping to get detailed information for spare parts, specifically size screws needed for the LCD screen & Assembly display. It's the only thing missing on the computer screen. I just happen to have a screen, but I'm running out of screws. One could even say that I have a little loose.

  I'm selling my old G62 341NR so I don't want to cannibalize it but I'm guessing that most of the screws required are interchangeable since it is the LCD that I have with the same connector.

  A final question is whether this model is interchangeable with the 2000-2b09ca because invariably when I search on my model that it jumps to the top.

  Thanks for any help you can give me on this & happy Thanksgiving!

  Molly_Dog wrote:

  I just buy this laptop auction, but information on it is like finding teeth of the chicken (which probably betrays my age & geographical origins).

  It is a 2000-2B80DX - C2N34UA 15.6 "laptop. I can't find information on the date of manufacture of that computer, but since it has Windows 8 I guess, it's a relatively new model that could explain the rarity of a maintenance manual.

  Before the tear in there, I was hoping to get detailed information for spare parts, specifically size screws needed for the LCD screen & Assembly display. It's the only thing missing on the computer screen. I just happen to have a screen, but I'm running out of screws. One could even say that I have a little loose.

  I'm selling my old G62 341NR so I don't want to cannibalize it but I'm guessing that most of the screws required are interchangeable since it is the LCD that I have with the same connector.

  A final question is whether this model is interchangeable with the 2000-2b09ca because invariably when I search on my model that it jumps to the top.

  Thanks for any help you can give me on this & happy Thanksgiving!

  HP 2000-2b80DX PC laptop Support Page | Maintenance and Service Guide | Parts

  2000-2b09ca is a different model entirely, it is not interchangeable.