HP ENVY 15 laptop: laptop bottom panel replacement

Hello

I bought my laptop about a month ago and it is currently under factory warranty. Two days before I accidentally dropped my laptop table and there is a break in the lower panel. It is possible to replace my bottom panel under warranty. If this is not the case, how much it cost to replace the Panel from the bottom only. Please advice. Thank you.

The standard warranty does not cover physical damage to a drop. You will need to have a protection against accidental damage, which would have been sold at an additional cost. It is the image that the fall has also put a small crease in the top cover. These parts are available, but very expensive HP and labor to do the replacement is also very expensive because you basically rebuild the laptop from the bottom to the top. If you are interested in pursuing the repair at your expense, post back with your country of residence and the number of full model of the laptop, so we are sure that get us the right parts. We can provide a manual, a video (maybe) and help find the parts as economically as possible, maybe not directly from HP.

Furthermore, this isn't a warranty HP channel and I don't speak for them. If you want to hear from the horse's mouth opens here a case of pension:

http://h20566.www2.HP.com/portal/site/hpsc/public/SCM/home?AC.admitted=1441971775406.1123376534.199480143

Tags: Notebooks

Similar Questions

  • HP Envy 17 laptop pc Screencolors are washed out

    Product name: HP ENVY 17-j027cl notebook PC

    Product number: E0K96UA

    8.1, update 1, 64-bit Windows

    Control Panel > display > calibrate color > n Option is no longer available

    Control Panel > display > change display settings > Resolution 1600 x 900 (recommended)

    Control Panel > display > avancΘs > monitor generic PnP and Intel(r) HD Graphics 4000
    -Graphics adapter Type 4000 HD
    -Monitor > generic PnP monitor
    -Color management >
    -Set the monitor at its Native resolution (cannot change beyond 1600 x 900)
    -To adjust brightness and contrast

    Intel HD Graphics Control Panel > hue: the color slider is set up to the left (0)
    Intel HD Graphics Control Panel > Saturation: Slider is midscale clockwise (-16)

    http://www.Intel.com/support/go/GFX/DL.htm

    Found and tried to apply the Win64_153318.exe on the Web site for my Intel 4000 Graphics Intel Graphics hardware. It could not install, with the error message is not for my system (it has been clearly stated Intel 64-bit, Intel(r) HD Graphics 4000.

    Found drivers HP Envy, SP63750.exe, Version 10.18.10.3304, dated November 8, 2013. Do no noticeable change.

    In some cases, I could get color acceptable to a mode (file JPG look at one), but unacceptable for display on the screen.  I tried the mode high contrast, but yuckk, made the screen really hard to keep up with all these text boxes, like watching a brick wall.

    If I look at the same files with my Netbook (Win 7 update) mini 1101, the graphics are really normal colors and contrasts. (Maybe the drivers I screwed up when I had sent for repair to the HDD/MoBo). I have not tried a total reset, and yet, it's always such a pain to do a reset to see that it of a hardware fault or not. Yechh

    Any help for a reboot to get my colors and contrast back to normal?

    Bearly

    First of all, the only Solution that is available (on the present four), Option 3. None of the other options had these functions), in this Envy 17 laptop.

    Although I had found another Option (which maybe you can integrate in Option 5), but remained elusive to me because part of my exploratory solution, the taskbar had large icons and the taskbar hid the 'Next', 'Cancel' buttons on the pages of process,

    The simple shortcut to my solution is: Control Panel > display > calibrate color: see 'Welcome to display color calibration.   I went through the correct colors calibrate the color Process andgotmy back.

    By default, option 3, transforming the 'sensor Monitor Service' is an employment status empty (early release) illustrated. This option seems to be a 'do nothing option. In my case, I can't thank you for trying, butnone of Options seems to work for me.

  • I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

    I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    http://eSupport.Sony.com/

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Mick Murphy - Microsoft partner

  • HP ENVY 14 LAPTOP - cannot change the color of the menu of win 7

    Right now I know it is a HP support forum but I have a HP laptop and desktop and I really hope someone here can help me really...

    Good one a few months ago I bought a HP Envy 14 laptop and I must say that I really liked it. Then a few days ago, I just bought a HP desktop computer (can tell you I'm a fan of HP) and I love it also.

    Here's my problem...

    On my desk, I decided to change her look, so I installed a custom theme (dark theme) and it changes the appearance of windows 7 and changed the color of the lower menu/taskbar of windows 7 in black and I really liked it. I decided to install this theme on my laptop and everything has changed except for the background color of menu/taskbar of windows 7 botom. For some reason any will not change the color of the menu bit matter what I do.

    I tried to go to:

    Panel-> personalization-> change the color of window glass

    and by selecting a different color but not matter what color I select windows 7 background menu/taskbar does not change it remains just the grayish color of say her since I got the laptop.

    Now, why this work on my desktop but not on my laptop?

    There must be a setting on windows 7 that prevents me to change the color of the lower menu/taskbar. Still worse firefox is horrible. I can not change the appearance of firefox, whenever I have try and install a new firefox theme does not change. On my desk, I installed a dark theme for firefox 11 (the Nasa Night Launch) theme and it worked very well but for some reason any on my laptop, nothing seems to work just...

    I really hope that someon can help me with this because it makes me crazy...

    I want to thank you all for your time and help,

    gh0st-HP

    DragonFur, I want to thank you for your time and your answers, you should know that it meant a lot to me.

    After doing a lot of work and trial and error, I finally found a solution to this problem...

    I did a lot of googling and research and what I found is that there are many people out there who are owners of laptop HP Envy 14 who have trouble changing the color of their windows 7 start menu/taskbar or with the taskbar is not not transparent.

    Here are some of the things I tried.

    1 Installing different themse (did not work)

    2. Update driver for ati radeon 5650 graphics card (did not work)

    3 tried to adjust areo ensuring transparency has been activated (did not work)

    4. tried to bios update (did not work)

    5 tried to use a program to change the color of the bar tasks (did not work)

    What I ended up doing is creating a new user to the administrator and when I created this account is a program called "stardock mypaint" come asking me if I wanted to use this program to change the original theme for windows. When I said this software to change the original theme of windows 7, it changed my taskbar to the greyish appearance, it was the same off-white color I had on my account I tried to change. So I went back to my account and I searched for the program "stardock mypaint" and I have disabled this theme and then he changed my windows operating system 7 to an original blue theme but the taskbar was transparent! Then I went into my themes and changed the theme I wanted and my taskbar has changed color and transparency! Needless to say I was so happy.

    I really hope that this post will really help someone else who is trying to solve this problem...

    HP I really hope that maybe you guys can watch this program "Stardock MyPaint" which I think may be for HP Envy 14 laptop computers and allow users to know that the use of this program can affect other issues.

    Isn't funny how the solution to the problem is always the simplest answer...

    I knew there was something in the windows that kept my taskbar to be transparent and changing colors and it turns out it was a program of HP.

    Yet once I really hope this helps someone else out there and I'm hoping that HP employees this will read so maybe they can help each other if someone falls on this problem.

    DragonFur, thanks again for your help...

    gh0st-HP

  • HP ENVY 17 LAPTOP PROBLEM 1201TX

    I BOUGHT A HP ENVY 17 LAPTOP 1201TX 3D EDITION HE GETS HANGUP ALL PLEASE TIME HELP ME SOLVE THIS PROBLEM AND WHEN STARTING LAPTOP IT SAYS HARD DRIVE ERROR (3F1) I EVEN DID HARD DRIVE TEST...

    Hello

    It is perhaps that your hard drive has failed and needs to be replaced.

    As another test, try the following.

    Follow the procedure below to create a bootable Ubuntu CD and follow the steps in part 3 of 'Try' to see if the operating system is running.  The option 'Try' runs the operating system from the CD without having to install on your HARD drive.  If it works Ok (it will be slow running on a CD), this would tend to confirm that the problem is only with the HARD drive.

    http://www.Ubuntu.com/desktop/get-Ubuntu/download

    If your laptop is still under warranty, you can contact HP and arrange for the replaced HARD disk - you can check your warranty status.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

    Kind regards

    DP - K

  • HP ENVY - computer laptop 17 t: HP ENVY - 17 t portable hard drive

    I ordered the HP ENVY - computer laptop 17 t with 4 TB 5400 RPM hard drive double, it is understood that the hard drive must be 4 TB? I understand? So why is my computer can see the C drive and 2 TB to 15 GB drive, where an another 2 TB?

    H397724166 my order number

    Hello

    Yes takes 2 TB + 2 TB (actually 1.81 TB and 1.81 GB). On my machine ready Envy 17 t, I got SSD 256 GB for C: and D: 1 to. Please contact point of sale, this forum is fo you and me, we can not help more. But before that, see File Explorer to see how many records

    Kind regards.

  • Envy 15 laptop: picture library on start display

    My screen start done scroll only 4 pictures although there are many more pictures in my library.

    How can I increase the number on the screen?

    Any help please?

    Thanks Douglas

    Hi @connelsey ,

    Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Envy 15 laptop and issues with the slideshow of the start screen. Here's a link using Microsoft with Photos.

    Open the app Photos Swipe in the right edge of the screen, and then tap Settings.
    Tap or click Options.

    Set Shuffle on Photos of tile photos to it.

    Make sure that all the pictures are saved in the same place as those that are read.

    I'd be happy to help you if necessary. How can I find my model number or product number?

    Please let me know.

    Thank you.

  • HP ENVY - computer laptop 17 t: HP ENVY - it laptop

    I guess that my HP ENVY - computer laptop 17 t is not the capacity of DVDs to create Lightscribe labels. Can someone cnfirm this?

    Hi @bakerla,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP Envy 17 laptop t and problems or questions about the Lightscribe working with your laptop. Thank you for your interest in LightScribe disc labeling technology. It is no longer available since November 26, 2013. My apologies.

    Please let me know how it goes.

    You can say thanks for trying to help by clicking on the Thumbs Up below! .

    Thank you.

  • HP Envy 17 laptop & 5 GHz

    Hello

    I have a HP Envy 17 laptop PC (product number: F7T68EA #ABU) and I do not see the network wireless 5 GHz with her.

    I understand that he supported 5 GHz and 2.4, but no joy still see the network - can be seen very well on iPhone and older laptops...

    Any help much appreciated.

    Thanks, will

    Wireless cards offered in this model series that none works in the 5 GHz band. N-2230 is a card of 2 x 2 but only 2.4 ghz. The good news is that there is no whitelist so that you can intall any card you want.

  • How can I download and reinstall photoshop cs6?   I have a s/n of account activation.  older desktop and laptop computers are replaced by new products

    How can I download and reinstall photoshop cs6 and lightroom 4?  My desktop computers and laptops have been replaced by newer versions, and I need to reinstall these products.  I don't want to register for memberships of cloud.

    Hi Kennethk,

    You can download the CS6 software using the following link: download Creative Suite 6 applications

    Let me know if this helped.

    Harsha-

  • HP ENVY 15-j030eb - SSD HARD drive replacement

    Hello

    Really hard to find all the information on the net regarding this laptop (no reviews, no tweaks etc.). Again I would buy the desire because of his good record. However only if the following can be done:

    Replace the HARD drive internal 1 TB per a DDI, preferably a Samsung 840 EVO Series 250 Gb.

    If so, can you just plug in, or do you need to support etc. Anyone who has done this before?

    Thank you

    Sebastiaan.

    Belgium

    Hello SebastiaanB,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you are looking to put a 256 GB SSD in the HP ENVY 15-j030eb. I'd be happy to help you with this. I'm you provide a link to the HP Support document: PC portable HP ENVY 15 and HP ENVY TouchSmart 15 Notebook PC Maintenance and Service of Guide. If you look on page 5 you will see that the HP ENVY 15 laptop only supports an SSD 24 GB mSATA, your wanting to install the 256 GB it would not work. What you would end up with, it's either the BIOS would not see the drive at all or it would be very slow and you would lose any benefits that you would get to use an SSD.

    To answer your second question in the guide even if you go to page 44, you will see instructions on how to install an SSD in your laptop.

    I hope that I have answered your questions to your satisfaction. Thanks for posting about these issues on the HP Forums. Have a great day!

  • Envy 15-j106la: if I can replace my CPU in my laptop?

    Hello, I want to know if the processor in my laptop can be improved. ENVY 15-j106la model.

    Thank you!

    The processor is half-bridge and theoretically evolving but the answer is still essentially correct because it is so hard to do and more expensive. If you absolutely must have it back and we can help.

  • Replacing the hard drive for HP ENVY 14 laptop

    Hello

    I have a HP ENVY 14-1150ca Notebook PC with a SAMSUNG HM640JJ hard drive, Windows 7 service pack 1.  I ran diagnostics from the system at boot upward and got a "DST short": message failed.  Failure ID: RGDX02-5KC73T-XD6V4J-60RE03. Product ID: XG981UA #ABC.

    Can anyone suggest that a replacement of the hard disk that I can order, or something similar or somewhat larger is fine.

    Thank you

    Suzanne

    Only the hard drive model is a 640 GB drive.  I think that you can easily use a 750 GB drive with no problem, in my humble OPINION.  Depnding the merchant of your choice, Amazon - here are a few choice.  Or Newegg, HEREare good examples.

  • HP Envy 17 Laptop: change the map wifi Centreno 2230

    I want to update my wifi card, I got the replacement warranty and it gives me wrong again.   He is currently an intel 2230 Centreno card, I want to upgrade to a much better unit.  Could you let me know which cards will work with my Bios.

    Envy 17-j073ca, right? I had HP lend me an Envy 17-j029nr which is almost exactly the same laptop and I can confirm from my own hands on that there is no BIOS whitelist for the wifi cards. The best I know of right now is the Intel 7260ac you can buy here:

    http://www.Amazon.com/Intel-network-7260-HMWG-wireless-AC-Bluetooth/DP/B00DMCVKMU/ref=sr_1_2?ie=UTF8&QID=1448830338&SR=8-2&keywords=7260ac

    The installation is easy. Simply remove the access panel in the form of "T" on the bottom, and you'll see it there.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Pavilion 27xw & Envy 15 laptop: how to keep sound when connected to the laptop

    Have a laptop 15.6-inch Envy running on Windows 10 and rose just a monitor 27 xw Pavilion, they are connected by a HDMI cable included with monitor

    If there is sound broadcast when I connect the HDMI cable it continues to broadcast through the speakers on the laptop, but if it stops then it don't re - start not to broadcast while connected.  If I disconnect the monitor then the sounds spread through the laptop.

    How to work around this problem?

    Jimmy, welcome to the forum.

    You must connect the monitor to the laptop and go to control panel / sound.  You must make sure that the speakers to the monitor are set by default.  If you do not use the monitor all the time, you may need to do this every time you connect it.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

Maybe you are looking for

  • Satellite M40X base memory replacement

    I have a parity error on my base memory and get the Windows blue screen with the error massage at any time. This memory can not officially replaced by the user. Then this memory being replaced without replacing the motherboard? Are the avilable to re

  • OfficeJet 5740: Cannot close the tray paper HP Officejet 5740

    I can't close the tray paper in an Officejet 5740 after taking it out to there to insert the new paper to fill a tray empty. What is the solution? Thank you!

  • Built-in camera no longer works after update firmware 7CCN35WW

    7CCN35WW applied on the 34 firmware. VeriFace stopped working, said that even if the camera is present in Device Manager there is no camera present. Skype does not either, says camera is used by another process, even after a fresh reboot.

  • I can add some old 2 GB of ram to new lenovo.

    I have already buy a new computer laptop lenovo G500s "intel core i3, 2, 4 GHz, 4 GB ram, 1 GB of NVIDIA 720 m" my old laptop 'nttcorrino' broke down, so I took her ram and wants to put this new lenovo. "» "And now is the issue, this name of ram" pc2

  • Setting for "allow device to wake the computer" gray for the USB root hubs

    So I wanted to change the setting for "Allow the computer to turn off this device to save power" in Windows 7 Device Manager. I accidentally also selected "allow this device to wake the computer". I want to change the setting back to "Allow this devi