Setting for "allow device to wake the computer" gray for the USB root hubs

Similar Questions

• Uninstalled the USB root HUB and now computer will not work

  Hello

  Just got a new computer and I'm afraid I might have broke it...

  My computer is a HP Envy 23-c100xt with Windows 8.

  I tried to use one of the ports 3.0 and 2.0 and it wouldn't read my USB, but I tried on another computer so I know this isn't the USB. So I followed some web tips online here and did this:

  Click on start and type device in the search for field, and then select Device Manager uninstall USB root hub

  Restarted my computer and the screen refreshes itself automatically every 4 seconds. Cannot open any program or even go to Manager tasks.

  Help, please!

  Thank you!!!

  Jess

  Are you sure you don't have anything else? It is difficult to see how to uninstall a device could lead to consequences also as usually convince windows NOT to reinstall the drivers and devices, it is what causes the trouble, not the other way around.

  Uninstalling devices does not lead to what you describe.

• Satellite A200 - 26 d - error code 19 Device Manager on the USB ports

  I decided to try Windows 7, but the usb ports do not work in Device Manager all the usb root hubs have a yellow triangle and the State of the device says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  I tried to uninstall via the Device Manager and restart the computer and download and reinstall the drivers for vista, because I can't seem to find the drivers for Windows 7, but none of this fixed anything. I was wondering if there was something else I could try or if I could get a link for the correct drivers.

  Hey JP317!

  If it didn t work removing the USB ports in Device Manager and restart the laptop, you should try to update the chipset drivers because they are usually a part of it.

  So check the site Web of Intel for an update and you should also find Windows 7 drivers.

  If you have any other questions, please let us know!

• Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Here is the document

  http://www.RM.com/support/TechnicalArticle.asp?CREF=TEC438020

  See the Suggestion of Shekhar:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/missing-power-management-tabs/4dd34dfb-B0E9-4f62-8eb8-0b0689344281

  Political group to turn and set the option for the inside network card power management tab

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/50fdee7e-fdf7-4734-8079-3a3aa5556fdd

  Kelly XP Tweaks - on this page scroll down to #204.  On the right side you will see "power schemes/configurations of restoration.  Here are the scripts.  You should see a window with «do you want to run...» »

  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  A link that did not work... TEC438020 http://www.rm.com/Support/TechnicalArticle.asp?cref=TEC438020.

  If you delete the start TEC438020 letters... This would have worked.   Sorry but for some reason that my shortcuts duplicate urls notice the end of the above url shows the same letters that I told you to remove.  Do not forget that in case it happens again in the future.  (God forbid)

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to read the data in a device connected to the usb port

  Is there a class or object, or the piece of code in Java that is comparable to the PDQComm32.ocx and the mscomm32.ocx used in VB6? I need to know how to read the data of a device plugged into the usb port of the BBerry. Is it possible to use the BB to read data from a device via a usb cable?

  I'm new in Java and I'm looking for the opportunity to write a project to read the data in a device with this program that can turn on a BB instead of on a pc.

  Thank you

  Did you watch net.rim.device.api.system.USBPort?

  That's what the doc says:

  Provides access to the USB port of the device.

  Avoid using this class in applications, as it is not portable. On the contrary, if you need to access the USB port, use factory CLDC Connector to serve a connection.

  Rab

• BlackBerry Smartphones to Blackberry Manager devices to display the USB PINS

  My Blackberry Bold 9000 is not recognized by my office blackberry Device Manager.  After hours of playing around to try to solve this problem, here is what information I can provide.

  My desktop and laptop running Vista 64-bit.  I had no problem installing the Desktop Manager on my laptop and cable, updated processes, etc. all work fine.  In my view, this allows me to isolate the desktop and not the device or the cable. The Desktop Manager software is to date on both systems.

  When I try to get the Blackberry device manager to recognize my camera on my desk, in the table options of connection under connection, that COM1 is displayed, Disable stateful shown.  USB-Blackberry 9000 (Paperback) appears on the laptop.  I've hunted around these tips and google for a solution to this problem, but I have not yet found one.  Under the Windows Device Manager, "Blackberry Smartphone" is listed under USB controllers when the unit is plugged, and the drivers are updated according to the instructions on these cards.

  The functions of USB ports for the operation of the keyboard, mouse, and external storage.  I tried to connect to all six USB ports in the back and two on the front of my office, without result.  When the device is connected to my desktop computer, Windows recognises the Smartphone and SD card separately as mass storage devices - with the phone powered on or off mass storage device option.

  I have a feeling that this would be resolved if I could get the Blackberry device manager to display a USB instead of COM1 port.  Someone at - it solutions?

  Hey this is my solution... it worked perfectly for me, and oddly enough, this is a difficulty for VMWare (also the difficulty to detect USB devices)

  Try to right click on one of the USB hubs (in Device Manager) and looking at the details of the driver. If usbfilter.sys is in the list then open your registry editor and navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class {36FC9E60-C465-11CF-8056-444553540000} and remove the UpperFilter, pair of usbfilter.

  I restarted after making this change, and it works fine now.  Its the first time in the month that I could plug my Curve 8900 using my USB on my PC 64-bit of Windows Vista (now Windows 7).

  KUDO to the population of VMWare for this solution.  Thank God, she also fixed for my BB Desktop Manager! WOOT WOOT!

  Here is a link where I found this solution

  http://BX.BusinessWeek.com/consumer-arbitration/view?URL=http%3A%2f%2Fcommunities.VMware.com%2Fmessa...

  Merry Christmas everyone

• PC does not recognize the cards inserted media or devices connected to the usb any longer.

  Recently, I noticed that XP Pro does not recognize storage devices of media inserted in the usb slots.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  The following articles might help you solve this problem.

  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• Qosmio F60 - 10K: Win 7 64 bit recognizes all the devices connected to the USB

  Hello

  I have a problem. I do not know this first run my Toshiba which was before 6 months or since...
  Some USB are recognized some are not, but many not a few USB are recognized I mean on USB, External hard drive USB too.

  I have 2 USB hard drive is recohnized 1 is not, btw... when I run Vmware XP he acknowledged all USB and my external hard drive all but in windows 7 a few USB are recognized, some are not...

  He finds something is attached to the USB but then don't say no driver, I tried it on other Windows 7 on another computer working USB and HDD external but my Toshiba Windows 7 64 bit doesn't work, btw... USB are good because when I turn on Vmware running :((

  And why I have no drivers on the support of the pilots then say no product, btw... Driver F60 - 10 K page no longer exist!

  Thank you, vfranges

  BTW... Sorry on English xD

  Hi vfranges,

  I put t have problems with the USB ports, but according to some other discussions here in the forum I recommend you to update the chipset driver.

  You can find the latest version on the Web from Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads

  Check this box!

• Where to find USB Root Hub for Equium A200-1V0 (PSAF5E) XP drivers

  I installed XP Pro on this laptop and can't find the USB drivers anywhere - anyone know where to find them?

  Also, my wireless device does not appear in Device Manager even if I enabled it on the front of the laptop!

  Any ideas would be appreciated, thanks.

  What the installation of service pack 2?
  The 3rd party USB drivers don t exist. The drivers are part of the Microsoft OS.
  So I recommend to install SP2 and update the BIOS to version XP ;)

  Good bye

• I have 3 computer Aspire 5600U who noted starting with a USB 3 device plugged into the USB 3 port

  He did not become a problem with constant updates of Microsoft for Windos 10 check daily all 3 computers to see if the device USB 3 must be disconnected before the reboot may end.

  last 10 Microsoft Windows Upgrade installed yesterday and now, the problem seems to have resolved itself.

• Is it possible to set up a printer wireless without the USB cable?

  Hello

  I have a HP Photosmart C4580 and I wanted to set up to run on a network, but I don't have a USB cable. I tried to install it without one, but it does not appear on the network, and I was wondering if you really need a USB cable to install it?

  Thank you.

  1. turn Radio on wireless to the printer.

  2. on your computer, search for all available wireless networks. You should find a named "hpsetup". Go ahead and connect to this network and ignore all warnings.

  3. wait 1 minute after have connected you to the network. Then, print a network of the printer Configuration Page. It should list an IP beginning with 169.254.x.x.

  4. type this address in the address bar of any web browser. You will reach the Embedded Server (EWS) Web of the printer.

  5 use the Wireless\Networking tab at the top and looking for an option to ' 802.11 wireless networks. On this page, you will be able to enter your network settings wireless (screenshot attached to facilitate their identification).

  6. make sure that you change the SSID for your network name. Click on the option button 'Infrastructure' and enter your WEP\WPA pasphrase. ENTER THE SSID AND PASSWORD EXACTLY AS IT IS, OR IT CANNOT CONNECT TO THE NETWORK.

  7. click on the button to apply and wait for the confirmation of the parameters being recorded.

  8 restart the printer. Once again the Config network printer page. Now, it must have a such IP assigned by your router and not with 169.254.x.x.

• Qosmio G50-12 q - how to configure the devices connected to the USB mode standby

  Hello

  I wanted to use the PC sleep function.
  I also wanted to as devices that have been extinguished when in stand by.

  Once implemented this function the PC will regularly stand-by, but the device connected by usb are set on fire, any other master type, a device a usb wi.fi, etc.

  Someone told me that maybe some functions in the Bios only are not put in place to do that once entered the booth by the PC off all devices those connected.

  What checks and I have to perform in the configuration PC bios?

  How we in the bios? By pressing the keys on which?

  Thank you

  * valkyrie @ *.

  Please post comments if workaround posted by Akuma helped!

  It would be really appreciated.

• My device used to be included in the device under the turbine BP & COM port section manager now it is hub USB root and I can't connect with my camera. Help

  I have a machine that uses a USB to serial connection, after I installed the driver in my computer, it finds the machine and load the device in the ports COM & LPT, but this morning for some reason, he shot my device in the USB root hub system. How to get out of there and recognized him as a COM & LPT device since it is a USB to Serial Port that I can discern the number COM port so that my computer can communicate properly?

  Hello
  
  1. What is the model and brand of the device?
  2. do you see any red or yellow bangs in Device Manager?
   
   
  a. in device, right-click on the Device Manager and select Properties.
  b. now in the Properties window, click on the tab General Post back the message found underdevice status.
  
  Open the Device Manager

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Equium A60 does not recognize the USB webcam

  I just bought a creative vista more webcam and tried to install it on my laptop Equium A60, the software is installed properly and everything but when I connected the webcam to the usb port my laptop didn't recognize it.
  I tried to uninstall and reinstall and nothing has changed. Someone has an idea of what could be bad?

  Hello

  Sometimes USB devices can be recognized correctly because of the low power from USB ports. Usually, USB devices should work with 500mA of power. It is a standard. But sometimes the USB devices need more than only of 500mA. In this case, you can use an external USB hub with external power supply.

  You can also disable the power save option in the device under USB root hub Manager.
  You will find a power management tab. Please enter in this tab and disable the option: allow the computer to turn off this device to save power.

  D this on all the USB root hubs