HP envy 17-j130ea: hp envy 17-j130ea graphics card upgrade

Similar Questions

• HP ENVY 137C 750: GTX 1070 for HP ENVY 750-137C graphics card upgrade

  I picked up a refurbished HP ENVY 750-137c and am currently looking to improve the graphics. I don't want to break the Bank, but I don't want it to last me a while, I'm looking at the Nvidia GEFORCE GTX 1070.

  Apart from the evolution of the needs of power, does anyone know if this card is compatible, and if there are problems with this upgrade? In addition, Nvidia recommends a diet of 500W for this card. Would be - it sufficient, or is - this genrous number? In addition, if someone has a product of power supply they would recommend for this theoretical combination, I'd greatly appreciate advice.

  Thank you!

  @Drifterx311, welcome to the forum.

  Here are the full specifications of the card on the nVidia website.  The card is double slot and 10.5 "long.  I suggest measurement of the back plate of e/s to the front of the box to see how much space is available.  I think it fits, but it will be tight.

  As you said, the specs recommend a PSU 500W (PSU).  Personally, I'd buy one at least 600 w.  This will give you extra power for peak needs.  I love Corsair products.  Here are a few PSU for you to review Newegg.  If you choose a modular power supply it will allow you to install only the cables that are absolutely necessary.  This allows for better air circulation.  The PSU is the backbone of the computer.  Read the reviews to see what users have to say about them.  A good diet will make your system run much better.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Envy 700-074 Graphics Card problem Windows 8

  Greetings,

  I recently bought the HP ENVY 700-074 (http://http://h10025.www1.hp.com/ewfrf/wc/product?cc=us & dlc = in & lang = to & lc = in & product = 5371495).

  Initial setup went fine without any problem.  I replaced the power supply so that I could add the graphics card from my old computer.  The power supply and graphics card worked perfectly for my old computer.  Feeding is a BFG Tech GX 550 watt modular power supply series.  The graphics card, I have installed is the Nvidia 560ti.

  The problem is that, when I start the computer, my screen goes to sleep (as there is no signal) until the login Windows 8 screen lights up. At this time, my screen lights up and it is normally.  However, if updates or restarts the computer, the screen turns off again and he returned sometimes when loading the desktop computer.  I tried to get into the BIOS to see if I could disable the onboard graphics, but I have been unable to access BIOS because I don't see anything on the screen during startup.  I removed the Nvidia card and returned to the use of the integrated graphics card and everything is back to normal.  I managed to enter the BIOS at the time here, but I don't see any possibility to disable the integrated graphics card or use the PCIe as main display (unless I missed something).

  I also noticed that Windows 8 shows I have 2 screens installed when only 1 is installed physiclaly.  My HP (HP 2009 m) monitor is listed in Monitor 2 and I initially had to go through the windows to get my HP Monitor to display the entire desktop (as it origionally extended from the start, the desktop computer).  However, number of monitor 1 is listed as monitor of generic cards.  Thinking that the computer used the non-existent monitor like main display when starting, I deleted the generic monitor than to have to reinstall windows.  I also tried to disable, but the problem persists.

  I guess that there is a conflict between the integrated graphics card and the Nvidia card.  However, I assumed that the edge will be disabled automatically after inserting a card into the PCIe slot as the integrated graphics card watch is no longer under device mananger.

  Hello:

  Have you changed the settings of the BIOS 2 (required) before installing the video card no HP?

  If this isn't the case, please read the info on the link below.

  http://support.HP.com/us-en/document/c03653200

• HP Envy h8 desktop computer - 1440t: storage drive and graphics card upgrade

  I bought my desire Desktop 3 years at hp store. Now, I would spend my disk storage and the graphics card because I wanto to speed up my computer and also I bought and new screen (screen 32 inch HP ENVY with Beats Audio Media) which has displayport but my graphics card is not.

  My office has:

  -First HDD: 1 TB, 7200 RPM, SATA
  -Secondary hard drive: 1 TB, 7200 RPM, SATA
  -Graphics card: GeForce GT 640 (3 GB)

  -Power supply: 460w

  And I want to upgrade those parts for:

  -Hard primary: 960 GB HyperX SAVAGE SSD SATA 3 2.5 (7mm height)

  -Graphics card: one of them

  * NVIDIA GeForce GTX 660 2GB GDDR5 PCI Express 3.0 Graphics

  Card TF N660 2GD5/OC (first choice)

  * GeForce GTX 680 (2 GB)
  -Power: 600w

  But I don't know if it is possible to do the update.
  Can someone help me with this?
  
  Product name: HP Envy h8 desktop computer - 1440t
  
  Product number: C1U78AV #ABA
  
  OS: 8.1 Pro 64 bit Windows

  JoBla, welcome to the forum.

  It is becoming increasingly difficult to ensure that the latest components will work in an old computer.  Your computer is almost 3 years old.  My suggestion is to choose the SSD and the video card you want to buy and contact the Technical Support of the manufacturer to determine if it will work with your computer.  They are the experts on their products.  This will save you the possibility to pay for the return of one of them.  That's what I did and it works fine.

  I can recommend a PSU 600W (PSU), however.  I love Corsair products.  Here is a very good power supply.  Read the reviews to see what users have to say about it.  There is a modular version of it, too.  The modular power supply is good for medium-sized cases.  It allows you to use only the cables that are absolutely necessary.  Which makes for airflow and better cable management.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• In Envy 700 graphics card upgrade - 215 Intel 4600 with Geforce gtx 750 ti

  Hello

  I wonder to know - is it possible to update my system with the following specifications by adding a geforce gtx 750 ti (http://www.amazon.com/EVGA-Superclock-Dual-Link-Graphics-02G-P4-3753-KR/dp/B00IDG3IDO/ref=sr_1_2?s=e...

  Thank you!

  HP Envy 700xt desktop PC product number: F9A62AV #ABA

  I've upgraded graphics card than Geforce gtx 750 ti 2 GB and it works perfectly. The card doesn't need extra provides powe.

• Envy Touchsmart 15 t-j000 CTO: Nvidia graphics card upgrade

  I read that in some laptops, video card from Nvidia's scalable, I want to know if this model of laptop.

  In this case, how can we know which models are available?

  I'm very disappointed because it's a good machine, is touch, have a core i7, 16 GB of ram. But I can't play any new games because performance graphics card.

  Thank you

  Hi @acmesoft,

  Thank you for visiting the Forums HP's Support and welcome.

  I looked in your question about your laptop 15 t-j000 TouchSmart from HP ENVY and want to change the graphics card. Your graphics card is part of the Motherboard.So this is the answer you probably don't want to hear. It is not possible to update the graphics card from the laptop.

  Thank you.

  If you want to say thanks for my efforts to help, click on the thumb to to give me a Kudos.

• HP Envy 4th gen: graphics card

  I have laptop hp envy touchsmart 4th gen. There is a slot available for the insertion of graphics card. Is it possible to insert a graphics card on this laptop. Can I extend 9-cell 6 cell battery. If you use an integrated graphics card then why would they give slot for graphics card?
  Details as follows
  Model No 15-j053cl
  Thank you.

  sikeya wrote:
  I have laptop hp envy touchsmart 4th gen. There is a slot available for the insertion of graphics card. ....

  Hello

  Where do you find the above information? The following link shows its specifications:

  http://support.HP.com/us-en/document/c03754263

  The 'Intel HD graphics 4400' chip is soldered to the mother/system board and replace that means buy a new computer.

  Kind regards.

• HP Envy 700-414: HP Envy 414 700 graphics card update?

  Hello, I just bought a HP Envy 700-414. It currently has an Intel HD Graphic 4600. I have a card Nvidia 9600 GT PCI Express. This system will promote the card. Not knowing that a lot of graphics cards is a worthy upgrade. I'm not much more than a player, but I do play some RPG occasionally. Any help would be greatly appreciated.

  Mack

  Hello

  The NVIDIA 9600, I've just looked at requires an auxiliary PCI-E 6 pin.  If the 9600 GT from NVIDIA that you require such a connector, then it will not work on your PC, unless you change to food.  In addition, the 9600 GT does not support DirectX 11, which is used with the recent PC games.

• HP Envy H8 - 1540t - graphics cards double, Pcie 3.0 support

  I have 2 questions about the use of dual graphics cards and Pcie 3.0 support in my machine.

  The machine is:

  HP Envy H8 - 1540t

  Win 8 64

  I7-3820 2nd generation

  10 GB OF DDR3 1600 MEMORY

  256 GB SSD

  1 TB SATA hard drive 7200 RPM

  Blu - Ray player

  TV tuner

  Prem N - Wireless Lan and Bluetooth 2 x 2

  600 Watt PSU

  NVidia GTX 660

  This machine uses the card mother Pegatron IPIWB-PB and has 2 Pcie x 16 slots. I realize that using the width double GPUS like GTX 660, the small Pcie connectors next to them will be buried, rendering it useless. They are so my 2 questions;

  1.) Will 2 Nvidia GTX GPU 660 is in good physical shape within the machine and be supported?

  2.) this motherboard with a Intel X 79 chipset does support Pcie 3.0?

  Thank you

  Hello

  You can find information on the following OFFICIAL link, it seems that it only supports PCIe Gen 2.0

  http://support.HP.com/us-en/document/c03132964#n241

  The image of the motherboard (see above) and the following picture of the 660 GTX, simple answer: 2 cards will not be in good physical shape.

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-GTX-660/product-images

  Kind regards.

• HP Envy 700-327c: graphics card on HP Envy 700-327c update

  I just bought and am preparing to install an AMD over-pants W7000 C2K00AT 4 GB GDDR5 SDRAM PCI Express 3.0 x 16 ATI Nvidia Quadro graphics in my HP Envy 700 - 327 c.  Any input as to what I can do to make this a free update of the problem?

  You are welcome.

  I would like to do some research before buying a power supply.  You may need more power than I recommended.  It says in the specs it uses less than 150W, but even more than the current PSU can provide with other components.

  I'd certainly appreciate hearing how things are going.

• Four edition of HP ENVY 15 t J100: ENVY 15t NIVIDIA graphics card problem

  Hello

  Today, I bought a hp envy 15t j100 quad edition energy star portable pc

  and he have NIVIDIA and INTEL stickers and materials but when I open the Device Manager

  I do not see the NIVIDIA only intel HD 4600

  Why NIVIDIA hidden

  or isn't there at all?

  is the problem of windows or your CV

  ??????????????????????????????????

  Hello

  I can't calrify that because it's a CTO machine and did you pay for the NVIDIA card option when ordering the machine? Pilot is on the site of support, sound as material is not on your machine.

  If no physical hardwre, 10 Windows cannot do anything about it. Now, my suggestion: talk to the place where you place your order and ask to give a COMPLETE listing of your computer. Part store lists only the options, not your machine.

  Concerning

• HP Envy 700-311: graphics card

  Quick Queistion, what graphics card should I buy that can fit in my pc and what is recommended I should use for this pc for games. I found some online, but I'm not sure if they fit into the pc and/or need any additional power ports, and another question is what food I buy also because some cards need a graphis amount required power I have 300w and I want more but I'm not sure if it would fit in the pc or if it would have any cables that has my current btw I do not really have a budget, but having said that I don't have the best thing out there, thank you

  You are welcome.

  My goal was to give you the best possible performance that won't break the Bank!  Here's a better mapwhich can be a bit too long for the space provided.  It's always a matter of concern.  I suggest to contact EVGA Tech Support (1-888-881-3842) to help choose the best card for your computer.  They are the experts on their products and are extremely useful.  You can tell them that a member of the HP Forums suggested that you communicate with them.

• TouchSmart from HP envy 14: HP Envy touchsmart 14 graphics card update possible?

  Hello
  
  I bought this laptop normally for the University, that it works very fast, but the graphics are a bit.

  Is it possible to update the graphics card on this laptop, and if so we should I get that fits?

  No video hardware is integrated into the motherboard, and there is no possible upgrade.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ENVY h8 - 1427 graphics card has

  Hello. I use this graphics card currently on this exact system: http://tinyurl.com/m2mvbq8

  The fan on the card spins constantly and loudly and that all cleaning and fixing attempts have failed. Could anyone recommend a replacement of the graphics card that I can't to find one similar to the one currently installed. Research for NVIDIA GeForce GT630 seem to flip graphics cards that look like the one I have. I am in Australia and running Windows 8.1.

  Thank you

  David

  Yes this would be too much work,

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Envy: Location of graphics card

  Where the port of the graphics card is on the laptop?

  @FaithCC

  Try this one first.

  http://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73302.exe

  Then this one.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

  REO