HP Envy 17-j184na 2nd HARD drive installed

Hello

I just bought a HP Envy 17 - j184na laptop and I do not want to install a 2nd HARD drive on the 2nd drive bay HARD inside, but there is no secure shell SATA cable for this caddy.

Where I would be able to buy this rubberized HARD drive [blue] shell-protection and water SATA to connect my 2nd HARD drive.

Thank you in advance.

Glenn [UK]

Hello

Through page 22 or 25 of the manual - http://h10032.www1.hp.com/ctg/Manual/c04091762.pdf

Part of HP for hard drive kit number is 720237-001

http://PartSurfer.HP.com/search.aspx?SearchText=720237-001

http://www.Amazon.com/GP/AW/d/B00G2FZ714?pc_redir=1408084113 & robot_redir = 1

Find the components of the hardware kit sold separately:

The part number for the 2nd drive hard micro sata cable is: 723421-001:
http://www.Amazon.co.UK/GP/AW/d/B00DSJ1K8G/ref=redir_mdp_mobile

The part number for the caddy metal/rubber is: 723419-001:
http://www.Amazon.co.UK/GP/AW/d/B00DSJ1L1W/ref=redir_mdp_mobile

Kind regards

Tags: Notebooks

Similar Questions

  • 2nd hard drive install on pavilion dv7-3060us 17.3 inches with Quad core processor

    Pavilion dv7-3060us computer has a 2nd hard drive Bay.  On 2 flags of 17.3 inches previous, I installed a 2nd HDD.  This quad core Pavilion is much thinner than the previous pavilions;  the underside of the computer has also a centre piece in the form of "T" in the Panel without screw - is a pop on the access panel or the entire bottom panel needs to be removed through the perimeter screws?  Still trying to find a manual showing this particular case - no luck so far.  The downloaded HP

    Manual for the previous dv-7 is for the case of style like unless I missed something.

    Install an SSD soon - would like to have all the "stuff" to install a 2nd drive hard if possible.  Anything I should be aware of before perform this procedure?  Don't really want to remove all the merits of the case.

    Thanks for any help that can be provided.

    klppap

    DP - K

    I appreciate the help.  The Caddy is the same that I used before (on the 1st dv7) the 2nd dv7 used the direct taking of 90 degrees into the adapter.  I have both of these me more allotted a 500 GB HD.  All I need pickup is the SSD.

    The "T" sign on the back of my case has no screws - but I can see the 3 component tabs snap at the top of the "T" through the small crack on the case.  These are shown on the exploded view of repair.  I'm projecting from the 'snap-out' Panel down on the vertical leg of the "T".

    Once again; Thank you

    klppap

  • 2nd HARD drive not recognized at startup

    HP Pavilion dv7-1245dx Notebook upgraded to Windows 7 Vista fm. Try to add nine more fast (7200 RPM) HDD (Seagate momentus 320) 2nd drive Bay. Can hear both drives running. Doesn't appear in disk management.

    1. someone with experience w / this?

    2. is it possible to add the 2nd internal drive or should I get a USB/esata cable & adapter?

    paulebolin wrote:

    There is a review of YouTube mobile of that same computer laptop and it shows a 2nd HARD drive installed and working.

    My BIOS boot order does not list only 1 of 2 separate HDD shows primary and secondary diagnostic tests.

    My BIOS is very, very basic and is not very many options.

    Would be - that the problem be attributed to the speed (7200) faster or the power supply to the new HARD drive?

    The service guide says that you have a hard drive configuration 2 x 320 GB 5400 RPM, but I don't think that the speed must be at 5400 RPM. However, the speed of the two drives should be the same I guess. As 2 x 7200 rpm or 2 x 5400 RPM...

  • Satellite A300-1J1 - how to install 2nd HARD drive?

    Hello

    I bought a Satellite A300 and I see in the workbook loads it is possible to add a 2nd hard drive. So I bought one and when I opened the box of hard drive, I have not found a connector to connect to my hard drive. I think I have to install a SATA connector, but I have not found a way to proceed.

    Thank you

    PS: Excuse me if you find mistakes, I don't speak very well

    Hey,.

    If there is no second SATA connector on the motherboard it s not possible to install 2nd HARD drive because you can t add such a motherboard connector.

    As far as I remember there are other threads on A300 and 2nd drive HARD here in the forum and the point is that all A300 using the same case for laptop, but the mothers are different. So you can have a 2nd HARD drive Bay but not connector.

  • install a 2nd hard drive in a c hpe - 257

    I'm considering buying an SSD for my computer HPE - 257c.  However, when I opened the box, I find no cables or cards that would allow me to add a 2nd hard drive.  I intend to use the SSD for the OS and programs and use the old (original) hard drive for data, etc.  I don't know how install the SSD drive and recovery disks allows you to reinstall the operating system on it, but what I need help on is reinstall the hard disk as a 2nd drive.  Any suggestions?

    Thank you

    E.

    Here are the options:

    http://www.Newegg.com/product/product.aspx?item=N82E16812123137

    or combo http://www.newegg.com/Product/Product.aspx?Item=N82E16812270184

  • How to use the 2nd hard drive internal for storage?

    Hi, I am a newbie in all of this. I would use the 2nd internal hard drive of our mac mini server (end 2012) for storage (in fact, I'll things rsync from a remote server to here. but this is not the point here.). The thing is, I don't know how to access the 2nd internal hard drive and where to start. I did all of the following commands in the Terminal, but I don't really know what they mean, and what can I do with this information. I've been Googling but most are guides on how to install a 2nd hard drive etc. I hope that the information below is enough for someone to give me advice please?

    Thank you!

    That shows disk utility?

  • 2nd hard drive in Satellite Pro P200

    Hello world

    I have a Satellite Pro P200.
    Anyone know where I can get an advance and a shopping cart to install a 2nd hard drive?

    As far as I know your laptop can be improved with the second HARD disk if the SATA connector is available.
    When you remove the HARD drive to the second HDD can you see it or not?

    I have the Satellite P200D with place for second HARD drive, but there is no connector HDD SATA upgrade is not possible.

  • Satellite P500-12D adding 2nd HARD drive

    Toshiba UK say it is not possible to install a second drive in a P500-12D.
    The reason seems to be that the "bowl" for the second disk drive carrier is not sold.
    I was also told that the second drive Bay could not be used "on the model" but the sata connection is there and inserts brass threaded in the case of the scree of the carrier are present.

    The Bay is deeper than 1 Bay (for the thicker > 500 GB drives and, therefore, the support unit for the 1st Bay can be used - entire centres are also different.)

    Ideas for a work around?

    Sorry for the spelling mistakes - my original message would not be accepted "your message contains profanity or inappropriate language.
    In the interest of your fellow forum users, we ask you to change your message.
    "but no indication as to where." Maybe it's that the things happening in the threaded inserts are not allowed

    Peter K

    > The reason seems to be that the "bowl" for the second disk drive carrier is not sold.
    The reason is that there are different configurations of P500
    The P500 and other series of Toshiba laptops are equipped with different motherboards.
    Not all motherboards support 2 HARD drive controllers.

    This can be a bit confusing for someone buying a laptop and see the second HARD drive Bay, but if you would remove the 2nd HARD drive Bay cover, then you will see that there is no HARD drive connector.
    This means that you will not be able to use the second HARD drive.

  • How to check if the 2nd HARD drive is possible on the Satellite Pro A200 PSAE7?

    Hello

    My A200/PSAE7 has a 200 GB HARD drive. For backup reasons, I would like to know - or learn to know how check - if my A200 already have the hardware support for a 2nd HARD drive, next to the slot for a 2nd HARD drive.
    In the BIOS, I see 'Toshiba MKxxx - hard drive' and 'hard drive - None '. Is the last entry in the BIOS is a sign that a 2nd HARD drive is supported and has to be put in the second location of HARD drive?

    Thanks in advance for any answer!

    Best regards
    Andreas

    You can do the following:

    Open the cover when the 2nd drive HARD so-called must be installed and check for some SATA connectors or cables. If there is an unused SATA connection so you can upgrade, if no, then you will need to backup your data on USB - HDD or whatever.

    If in the BIOS is something now, he won't say that he is physically present.

    Welcome them

  • Discs of recovery, or vanilla Windows Installer on Q770 and 2nd HARD drive

    The Qosmio Q770 need to reinstall windows,

    At thining use the disks of recovery, or just vanilla win 7 and then add drivers, I need.

    issue with recovery disks it will affect the 2nd hard drive because that's where all my data?

    Thank you

    LoonyT

    In my opinion, you must install Windows using the original recovery disk. It is much easier and you do not install all the drivers, tools and utilities. All this is included in the recovery image. After installation of recovery image simply configure OS and you can remove applications that you don't need.

    I force test but I m pretty sure second disk will not be changed, just the main hard drive so your data must be secured. You can make backup anyway.

  • Pavilion Slimline d 235 400 has room for a 2nd hard drive?

    Hello

    Please check

    (1) if the Slimline 400 - 235 d has enough room in the tower to House a 2nd hard drive?

    I saw the video in this link, looks like it can only hard drive of House 1

    http://support.HP.com/us-en/document/c02915677

    (2) my HP warranty is cancelled if I buy my 2nd hard drive and install on my own?

    Thank you!

    BH

    BH098, welcome to the forum.

    I don't think you can install a second hard drive.  In the case, here are the bays of units:

    Size Bay bays Total

    13.33 cm (5.25 inches) ODD1
    8,89 cm (3.5 inch) HARD drive1
    * Berries can be occupied by existing material.

    One is occupied by the HARD drive and the other by the DVD recorder.  If you want to add a disk, I suggest buying a USB 3.0 external drive.

    If you have installed a second hard drive, he would not cancel your warranty.

    Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

  • How to add a 2nd hard drive for HP Pavilion DV7!

    How to add a 2nd hard drive for HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.

    (1) classification of the HDD, hard drive, hardware kit. Disc kit HARD material includes mounting rails, static shield, screws, insulators in rubber and SATA cable from the motherboard. Check your model & product # to ensure compatibility.

    Material of parts HP HDD Kit 517639-001 for DV7-3165DX product # WA794UA and WA794UAR.

    (2) training of consult - Windows 7 PDF, table of contents, 7 replacing a drive in secondary hard drive Bay. This will show you how to install a 2nd HARD drive in an HP DV7.

    Readers - Windows 7 PDF

    (3) to select a Windows 7 computer, select the installed HDD, Format (if not already formatted).

    (4) if the drive HARD does not appear in Windows 7 under computer, go to the Start Menu, find programs and files, enter "Computer management", select storage, disk (Local) management, look for the 2 HARD drive Bay (should appear as disk 1, Bay 1 HARD drive should show as disk 0), Format of the 2nd HARD drive (the one that you just installed).

    Update: I have the 2nd HDD (WD 1 TB) installed, Windows recognize now after completing the steps I mentioned in step 4, Format with default allocation NTFS 931,51 GB free, 118 MB USED to put in shape. Format exFAT to allocation by default 931,51 GB free, 1 MB used to put in shape. I chose NTFS format to reduce the fragmentation of the file.

    My solution.

  • No satellite P770-111 no SATA cable to connect the 2nd HARD drive

    Hello!

    I bought by Satellite P770-111 3 days and was hoping to insert another HARD drive that I had in my old laptop.
    OK, I opened the plastic cover on the bottom side of the laptop and there are 2 slots of HDD (2.5 ") but a single HARD disk.
    A HARD disk that is currenty in the laptop's big 500 GB. I would like to install another, but there is a problem:
    There is no cable to connect it to the motherboard SATA.

    Basically, there are 2 slots hard drive but only a connection interface. Could you please tell me how could I install a 2nd HARD drive?

    Thank you in advance!

    Damjan

    > there is no cable to connect it to the motherboard SATA.
    The fact is that not all laptops of the same series of notebook models are equipped with the same motherboard and controllers of same.
    This means that even if there is a second HARD-drive Bay, you will not be able to use a 2nd HARD drive. You know

    The chassis is the same in all models of laptops but there are different motherboards and not all supported 2nd controller.

  • Qosmio G20-139: need help with 2nd HARD drive installation

    Hey fans of tosh.

    I got a Qosmio G20-139 and I want to install 2nd HARD drive. How can I go about it? I don't want to mirror the 1st HARD drive I just that it runs as a HDD separated for more storage. How do I set up and format?

    I'm using WXP MCE any help received with gratitude, keep in mind, I'm no expert actually I'm a fool to the village that of been inbreeding so take me through in easy to understand steps that even I can follow.

    Cheers in anticipation

    StevieB

    Hello

    That s just to change the BIOS settings in the BIOS!
    I think that the BIOS settings are placed in the last page of the BIOS (3).

    Try setting the 1RAID-0 on the first HARD disk and the 2RAID-0 the second HARD disk.

    It worked well on my laptop.

    By the way; information on the RAID configuration found in the user manual.

    Have a nice day ;)

  • 2nd hard drive for HP Pavilion dv7t-4000 CTO Notebook - what do I need?

    Hi, I have the HP Pavilion dv7t-4000 CTO Select Edition Entertainment Notebook (product # WV703AV). It can accommodate two hard disks but only came with one. What would need to be able to install the second hard drive? I need just a connecting cable or I also need to caddy or kit?

    Also, would I get a solid state? My laptop that would support or should I just use regular?

    Currently, I am on Windows 7 64-bit. I have a 500 GB hd (which came to be partitioned with hp tools/restoration).

    Help with what I would need to a conventional hard drive or ssd would be greatly appreciated. I tried to look through messages of others first, but could not find anything specific to my model. Thanks for your time!

    Hello:

    The only place I know where you can get a 2nd hard drive kit is that provider.

    http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=345

    Your laptop should be able to work with an SSD, but I can't guarantee it.

    I don't really see any point in adding an SSD unless you make the main hard drive, and to do this, you must get an SSD of the same size as the original 500 GB hard drive to use the recovery discs to reinstall the operating system.

    Most people get smaller SSD and they use the W7 product key to activate a simple installation of W7.

    If you can read all 25 characters of your product key for windows 7, you can do your own installation media and allows to install Windows on a smaller than 500 GB SSD.

    If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

    Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

    Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a 4 GB flash drive to use the USB compilation method.

    http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

    Use 25 characters on the PC product key to activate the installation.

    The key will activate a 32 or 64 bit installation.

    Then go to the support of the PC and driver page to install the drivers you need.

    Link to downloads ISO of W7 is below.

    http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

Maybe you are looking for