HP Envy 17 N001tx: Envy 17 N 001TX HARD + SSD drive

Similar Questions

• HP envy m7-j120dx what ram, ssd drive will work for the upgrade.

  HP envy m7-j120dx. I would add a ssd and ram to the complete 16gig. any suggestions on what is my best bet for each of these products. No matter who else makes these? I looked online and can barely find anything about these except for comments.

  It's because it's so new. Here is the Service Manual:

  Manual

  Page 41-44. He held actually two hard drives.

  The memory is SO-DIMM DDR3L-1600. The 'L' is important. 1.35 volts not 1.5 volt.

  http://www.crucial.com/store/ListParts.aspx?model=envy%20TouchSmart%20m7-j120dx

  There is the memory you need at the highest and also a decent SSD. In order to give the best advice that I need to know your SSD budget. We can also help with migration/installation of the software. Keep the existing as a second disk drive and use the SSD for a boot drive. If you need the second cart/cable drive we can connect to that, too.

  If it's 'the Answer' please click on 'Accept as Solution' tp help others find it.

• HP ENVY 17 t-k000 CTO: HP ENVY 17 t-k000 CTO WiFi driver (Windows 7 x 64)

  HP ENVY 17 t-k000 CTO WiFi driver (Windows 7 x 64)

  I've just killed my machine from Windows 8.1 stock that came with Windows 7 Pro x 64. I was able to install all the necessary drivers and software located on this page, except for one.

  <http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063 & lc = on & cc = us & dlc = in & sw_lang = & product = 7174...

  However, none of the Wireless LAN drivers worked. (I tried just in case)

  When installing Windows 8.1, I was able to tell that the WiFi card installed was a feature of Broadcom, but the driver on the support page for this machine does not work.

  I tried the last few days but I find no related article this topic.

  Does anyone know of another driver who can work with my camera?

  Hello:

  Here you go...

  network controller:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?s wItemId = ob_133353_1 #tab1

  bcm43142a0 (bluetooth)

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloa dIndex? softwareitem = ob-132205-1 & cc = us & dlc = en & lc = fr...

• HP ENVY - computer laptop 17 t: HP ENVY - 17 t portable hard drive

  I ordered the HP ENVY - computer laptop 17 t with 4 TB 5400 RPM hard drive double, it is understood that the hard drive must be 4 TB? I understand? So why is my computer can see the C drive and 2 TB to 15 GB drive, where an another 2 TB?

  H397724166 my order number

  Hello

  Yes takes 2 TB + 2 TB (actually 1.81 TB and 1.81 GB). On my machine ready Envy 17 t, I got SSD 256 GB for C: and D: 1 to. Please contact point of sale, this forum is fo you and me, we can not help more. But before that, see File Explorer to see how many records

  

  Kind regards.

• HP ENVY 15-J003LA MAX MSATA SSD?

  I would like to know what is the maximum capacity that supports msata laptop HP ENVY 15 - J003LA.

  Another question I have is about the following limitation:

  SSD drive:

  Support for SSD drive 24-GB mSATA (not available on computer models with memory system 16834 - or 12288 MB)

  Why can't I drive SSD mSATA 24-GB with computer models equipped memory system 16834 - or 12288-Mo?

  Thank you...

  It recognizes all MSSD size.

• HP ENVY 15-k009ne: replacement of SSD for ENVY 15-k009ne

  Hey there everyone.

  I would like to know if it is possible to replace the hard drive installed SSD (8 GB) on my Hp envy 15-k009ne. The problem is that he is very much in quality and appear to be limited to the default files of hp. I have a few questions:

  1. is it possible to replace? If not, is it possible to replace the other hard drive (1 TB, 5400 RPM)?

  2. What size (actual size and capacity, I mean) or number/model should I buy?

  Thank you.

  PS sorry if this is a recurring question. I must be sure before that I could buy another SSD drive which is quite expensive!

  The specifications of your laptop do not indicate that you have an SSD. You may have a hybrid drive that has a cache of flash 8 GB built-in player for faster access, but this isn't a separate volume that holds its own files, just a different part of the reader. HP sold never, to my knowledge, laptops with an 8 GB SSD. You probably also a HP recovery partition on your hard drive. According to the specifications, the hard drive only your machine is a 1 to 5400 RPM mechanical hard drive standard.

  See p. 66 of the manual here:

  Manual

  Unfortunately, access to the hard drive Bay is very difficult and forbidden to an end user. In other words, it will jeopardize the warranty. If you are past the warranty and want to remedy let us know. You can replace the mechanical drive with a 2.5 inch SATA SSD and your laptop will be much faster if you do. There is also a slot of the WSSD m2 on the laptop, to complicate things more, but use it to add a SSD and boot of it is even more difficult. Have any kind of SSD in laptop computer that is not the boot drive make not much sense. However, if you want to explore the option of WSSD m2 we are here to help.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Envy touchsmart 15 - new HARD disk size

  I recently ordered a Touchsmart from HP Envy 15-j005sa that has a 1 TB HARD drive. I'm looking to clone the orignial in an mSATA SSD drive so I was wondering what size is recommended.  How much space is used when it is new so using this information can buy a large enough disk size?

  Thanks in advance

  Hello

  There is that little clone options b clone the HARD disk which means that you have the mSATA SSD equal or more 1 TB (b) clone c ONLY: This means you the mSATA SSD equal or superior to c:... My suggestion: shrink C: for small size say even 60 GB or 120 GB (if you don't have a lot of programs installed) FRONT of clone and ONLY clone C: normally larger (capacity) is better because you can install more programs that him.

  Kind regards.

• HP ENVY 17-j101ex - replace the SSD HARD drive

  Hello

  I have HP ENVY 17-j101ex, with the standard configuration: 2 x 1 TB drive HARD 5400 RPM SATA. I want to buy 1 SSD drive and replace the first (boot) hard disk drive. I don't know if it works or not.

  I want to buy a SSD Samsung 840 EVO 250 GB SATA III (MZ-7TE250BW), 2.5 ", dimensions: 100 x 69 x 7 mm

  I have to: 1 x 1 TB HARD drive (as a secondary drive) + 1 x 250 GB SSD SATA3 (as your startup with system disk)

  Is this ok?

  I found some info, that:

  Supports a 6.35 cm (2.5 in) 300 GB or 160 GB SSD (SSD) drive in 7, 0 - mm (. 28 - in.) thick

  Supports 6.35 cm (2.5 in) hard disks to 12.7 mm (. 50-in) and a height of 9.5 mm (. 37 - in)

  Is it not this Samsung SSD too big?

  I also found information on envy 17 series, which:

  Supports the following single hard drive/solid-state drive combination configurations:
  ● 1-TB, 5400-rpm, 12.7-mm hard drive × 1 + 300-GB solid-state drive
  

  and also:

  NOTE: Supports RAID-0 as default for all dual hard drive/solid-state drive combination configurations.
  

  So, first of all should I disable RAID-0?

  Thank you for your help and sorry for my English

  In fact, I have the same model laptop PC series. You will have no problem replacing the mechanical main hard drive with an SSD. The Evo to Samsung 250 Gig is a very good choice. I suggest you get cloning software, put the SSD in the second slot, start from cloning software and copy (clone) the startup disk for the SSD. You'll slim down the contenst of the diskette of starting less than 250 concerts to achieve, but you can store files off to the second disk of 1 TB in the process. There are other ways to do this post if you have any questions.

  Here is a video showing how to install the hard drive.

  https://www.YouTube.com/watch?v=wx3dMGXrGCc

  RAID-0 is supported, but you wouldn't want as a second hard drive with an SSD. If your readers are appearing as volumes of letters separated in 'the PC' or 'Computer' then RAID-0 does not exist and you shouldn't have to do any disorder in the BIOS.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Envy 17 model 17-j102ea SSD Boot question, Legacy Support, BIOS

  Hi, first post ever and excuse if this has been covered - if so, please me directly to pertinent information.

  Bought an Envy 17-j102ea...

  Hardware problems I would like help / advice for, please:

  Legacy support / boot from USB Flash Stick:
  Tried to install Windows 8 via a USB bootable work has confirmed...
  The laptop does not detect except Legacy Support is turned on...
  Once Windows is installed on drive (1 TB 5400 original disc), if I turn OFF then Legacy Support again (as DEFAULT) it starts not from the installed windows now HDD - only when I put Legacy Support back on will it boot.
  Can someone please explain / advise?

  Question SSD:
  Try to use a 240GB vertex 3 SSD Drive...
  Computer laptop wont recognize it- whether it is in Legacy Support mode...
  I've seen a few posts on the compatibility and 240 GB not supported...
  It's for real?

  BIOS:
  This is a complaint, I want something on this topic, please...
  REALLY.
  Why so basic bios options?
  Why can't have two readers in the laptop and choose which start from the first that is alternate between discs easily when I choose?
  For a decent computer ", a poor quality BIOS, it disappoints BIG TIME.
  It should be fairly easy for programmers to HP create a GUI BIOS updated with the best options.

  * I'm a student in computer SCIENCE and make a clean installation on this laptop with no product key, SSD and a very basic BIOS incompatibility sticker, I find it a little boring, and it takes a lot of my time...

  Looking forward to some useful answers.
  Thank you in advance.

  Oh, I didn't know you meant that.

  Update:

  I bought 8.1 Pro student - implemented on a USB stick (the same Corsair Voyager one) - activated UEFI mode...

  It set up perfectly om the 240 GB agility SSD 3!

  On the F9 boot menu option it acknowledged even the USB as UEFI.

  Very happy now :))

  BUT, can you please help me with something else?

  I put the 1 TB HDD in BAY2 5400 original, and it is not recognized at all.

  Any suggestions?

  So, thank you for your help miuch. : )

  ... LAST UPDATED:

  After rebooting the system TWO it recognizes the 1 TB drive! : )

  Thanks again for your help.

  You have been great, and I learned a lot on the way :)

  Best wishes...

• HP envy 14-u009tx: help! need driver for wifi for win 7 64 bit

  Please help me,

  I was buy laptop, HP envy 14-u009tx

  original is using win8, but I am familiar with this os, so I'm going down for win 7 64 bit.

  Please someone help get this wifi driver. using braodcom.

  hardware ID here:

  pci\ven_14e4 & dev_4365 & subsys_2230103c & rev_01

  THX before.

  Hello:

  You need this driver:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_133353_1#tab1

  You will also need this driver bluetooth:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5405106 & swItemId = ob_132205_1 & swEnvOid = 4058

• HP Envy 17 t: what size usb drive is necessary for the recovery of HP Envy 17 t 10 (64-bit) Windows?

  I just installed my HP Envy and wanted to set up a recovery disk.  The USB key must be less than 32gigs, but the example has not been updated for Windows 10 the instructions say.  It shows a recovery screen for a laptop of Win8 with the source of recovery like 17 concerts.   Is there a way to check the requirements for the front to accept the HP one time recovery option.  I have a new 16 GB USB key and wanted to make sure that it is large enough.

  Also do a backup image to DVD?   If so, how many DVDs?   The laptop is new and I added only Chrome and some minor programs.  My data files are always on an external hard drive.

  Hello

  Thanks for posting in the Forum from HP Support.

  To be honest, I don't know what size will be that these recovery files are because they can vary from the version of Windows to another. They can vary from a model.

  In my opinion, 16 GB is probably not enough.

  DVDs are usually 6 (6x4.7 GB = about 28 GB) but this can vary from one model.

  This possibility of imbedding maybe once, there are other ways that you can save your system indefinitely.

  This is a free option included in all windows (creating system image, it's free as included in Vista from the outset).

  http://support.HP.com/us-en/document/c03544793

  However, this option requires (e.g. USB HDD) external HARD disk or DVD. It does not work with USB flash drives.

• HP ENVY 700-074 Desktop PC: Graphics driver is not up to date

  Hello, I was trying to update my driver of Intel 4600 Graphics for many months now desperately and it did not work. There is currently a problem with my graphics driver (it does not play in one of my pc games, they the accident that I start up) and I was recommended by various people to update my graphics driver. I tried using the Intel Web site to update my driver, but since it has been changed by the manufacturer would not. HP support for my computer for the driver downloads and software did not work, either I get erroer - 259, as the version he tries to download and install a version lower than what I currently have installed (Version 10.18.10.3621). I don't know what to do when I searched hard for a higher version than what I have installed.

  Hello:

  See if David at the link below works for you too...

  http://h30434.www3.HP.com/T5/notebook-video-display-and-touch/HP-envy-vdeo-drivers-are-way-out-of-date-and-HP-won-t/m-p/5663186#M133496

• HP Envy 15 t-j000 with ssd upgrade

  Hi all, I'm from outside the United States and I will be the week next to the United States and I want to buy an SSD for my HP Envy 15 t-j000, is to have 16 GB of RAM and 1 TB 5400 RPM hybrid disc, what do you recommend? I don't know if I can use any mSATA SSD, or can only install the SSD 24 - GB PN: 720564-001.

  Your help is very appreciated.

  Kind regards

  acmesoft

  You may not use any mSATA SSD. The purpose of the mSATA SSD is as a cache drive configured with the software Intel IRST. It will not replace the primary hard drive.

  What you need is a SATA SSD to replace your hard drive (legacy) of spinner with. Here is a great article on the How to geek about why you should switch to an SSD.

  The article contains information on the best ways to accomplish the task, including links to software for cloning. I highly recommend buying an SSD as a migration kit. The kits include a usb to SATA cable and software for cloning. Who will do the simple upgrade.

  Here is the guide to maintenance and Service for your laptop. The hard drive is a customer service unit. There on page 47 for instructions that explain how to remove and replace the hard drive.

• HP Envy m7-n011dx: HP Envy m7-n011dx, installation of SSD and drivers for windows 10

  Hello.
  
  Just got on my mail today a HP ENVY m7-n011dx.
  
  HP ENVY notebook - m7-n011dx
  Product: M1W00UAR #ABA
  Warranty: 90d90d0d
  Model: m7-n011dx
  
  I have an SSD and install Windows 10 company on that front. I can get some drivers from here:
  http://support.HP.com/us-en/drivers/selfservice/HP-envy-M7-n000-notebook-PC/7771355/model/8381965?SK...
  
  But this forum helped a lot with good advice on how to do, so if you have any recommendations on what I should install first, or the order of installation, please let me know.
  
  Also, is there a quick way to completely disable the mouse pad?
  
  Thank you!

  Intel Chipset utility must always be the first installed, then all the others in this category. Graphics would be my next choice mainly for aesthetics. Others can be installed in virtually any order.

  I'm sorry that I don't know a quick way to disable the touchpad. I have no idea why HP has removed the button off / on for most of their laptops.

• HP Envy 17-j184na 2nd HARD drive installed

  Hello

  I just bought a HP Envy 17 - j184na laptop and I do not want to install a 2nd HARD drive on the 2nd drive bay HARD inside, but there is no secure shell SATA cable for this caddy.

  Where I would be able to buy this rubberized HARD drive [blue] shell-protection and water SATA to connect my 2nd HARD drive.

  Thank you in advance.

  Glenn [UK]

  Hello
  
  Through page 22 or 25 of the manual - http://h10032.www1.hp.com/ctg/Manual/c04091762.pdf
  
  Part of HP for hard drive kit number is 720237-001
  
  http://PartSurfer.HP.com/search.aspx?SearchText=720237-001
  
  http://www.Amazon.com/GP/AW/d/B00G2FZ714?pc_redir=1408084113 & robot_redir = 1

  Find the components of the hardware kit sold separately:
  
  The part number for the 2nd drive hard micro sata cable is: 723421-001:
  http://www.Amazon.co.UK/GP/AW/d/B00DSJ1K8G/ref=redir_mdp_mobile
  
  The part number for the caddy metal/rubber is: 723419-001:
  http://www.Amazon.co.UK/GP/AW/d/B00DSJ1L1W/ref=redir_mdp_mobile
  
  Kind regards