HP Envy 17 Notebook PC: Windows 10

Similar Questions

• HP Envy 17 Notebook TS Windows PC 8. WiFI problems

  I have a new HP Envy TS 17 laptop, Windows 8 operating system.  Info network driver of the wireless adapter:

  Vendor: Intel Corp.

  Date: 19/09/2013

  Version: 16.5.3.6

  Signer: Microsoft Windows Hardware Compatibility Publisher

  I keep losing WiFi connection. And yesterday I had to do a restore as WiFi has completely disappeared from my computer.  It just wasn't there.  If it happens again I hv to restore again? Can anyone help to lose/remove WiFi connection.  Very fustrating as the computer is new.

  Hello:

  You can try the latest driver directly from Intel for the wireless card that your laptop model.

  https://Downloadcenter.Intel.com/default.aspx

• HP Envy 17 Notebook PC: Windows 10 keeps

  I had the problem since I upgraded to Windows 10 Pro 64 bit since July 29. Once I used my PC for more than 15 minutes, it never stops. I have to use the power button to turn it off. Research I've done shows much of the miracle solution mentioned by others on this issue. There was an interesting article in October 2014 in which those who were appointed to run Windows 10 through the test before the release date identified this as a problem. Microsoft has released KB3010668 for this problem. However, nobody seems to have any idea where this KB is currently.  With so many HP users having this problem, one would think that HP could express its concerns to Microsoft.

  Well let me clearify if when you improved window 10 that his version of the bios has been reset to Moose or stock or watever you mean but now if you update your bios from hp Web site and install the closure problem willl be slolved automatically
  If you find this helpful please click on Bravo

• HP ENVY dv6 Notebook PC: Windows update 8.1

  I had problems trying to upgrade from windows 8 for windows 8.1.  I posted to the Windows forum and gave instructions for a clean install, I did 2 times now.  The first time it even got stuck in the set of files to 82%.  I went back in and downloaded again 8.1 and tried again this morning.  This time when hit 82 percent that it turned off my computer.  I turned on my computer and it reinstalled the old version of windows.  This time when I got back to 8.1 windows installation has started working by itself.  I don't know what I can do, but I hope that windows 8.1 do not continue to try to settle.  I think that my installation for windows 8.1 files are flawed.  Is there anywhere else to get the update and more in the store?

  try to run the windows update troubleshooter.

  "in your screen type for tile" windows update convenience store.

  and follow the instructions.

  Good luck!

• HP Envy 15 Notebook PC TS: Problem sound Intermittent HP Envy 15 TS / Windows 8.1

  Specifications of the computer:

  HP Envy 15 Notebook PC TS

  Product # E1P05AV

  8.1 Windows 64-bit

  Intel Core i7-4700MQ CPU @ 2.40 GHz

  2 x 8 GB of RAM

  Map of KBC Version 93.52 system 1963

  Graphics device 1: NVIDIA GeForce GT M 740 V.10.18.13.5435

  Graphics device 2: Intel Graphics HD 4600 V.10.18.10.3304

  Audio: IDT High Def Audio CODEC / pilot: stwrt64.sys V.6.10.6491.0

  Question: In the past months, my sound will go off randomly automatically.  If I close the lid and let the computer in to sleep mode or if I restart the computer, the sound comes back.  When the sound disappeared, the volume buttons on the keyboard, so to work with a lag and the mute on the keyboard does not work.  Try to use the sound test, or even navigate the tabs in the Properties section of speaker to accuse also considerably by the sound does not work.

  I noticed other things: I was watching a youtube video when the sound came out, I left the chrome tab that I used for the video and the sound comes back a few seconds later.  He then disappeared a few seconds after I opened a new tab and returned to watch the video.  I had also the same thing happens with the help of a video editing software - quit the application, sound came back, returned to the software, sound went out after a few seconds.  I also had both sound back after going to the speaker properties - Advanced tab and switch format, by selecting the test button and clicking on OK when a message saying "the sound system is in use, taking the test can cause the application to fail" (or something similar).

  I tried to use various utilities for troubleshooting when the problem occurs - the find and troubleshooting audio fix is no problem AND the device is listed as working properly in Device Manager.  I've uninstalled and reinstalled the latest drivers for the IDT HD Audio CODEC several times - no help.  In addition, the problem has been resolved not when I converted briefly to Windows (back to windows 8.1) 10.  In addition, I tried to use the other pilot of "High definition Audio Device" in place and place of the IDT CODEC, but the same problem happened - sound turns off randomly until I rebooted or put my computer to sleep.

  I'm pretty computer - savy but I can't seem to understand what the problem is.  It doesn't seem to be a hardware problem or the sound would probably not come back so quickly or clearly as it does...

  One last piece of information: I noticed that the first time that I reinstalled the Windows audio 24/06/2015 - and also several updates were installed on the 23 & 24 June - watching these updates to see if they are the cause of the problem.

  My father had a speaker bluetooth for Christmas - I tried it out on my computer because it works completely independently of my sound card and it was working fine.

  I bought one of my own for $30 at target - Jam Classic Wireless Speaker - and now I have wonderful sound.

  Does not resolve the issue of the root, but the problem is solved!

  I'm just upset that HP gave me the such a card its crappy that it only lasted 1 1/2 years before give me questions, just long enough to ensure that the warranty expires...

• HP ENVY 15 Notebook PC: Laptop made my HP HP ENVY 15 get the app 'Get windows 10 '?

  Hey! I have a

  HP ENVY 15 Notebook PC

  Serial number: [Moderator published serial number]

  Product number: F6C58PA #ACJ

  Its uptodate, but I still can't find the app 'Get Windows 10 '... So that mean my laptop is not compatible for Windows 10 or there will be the update sooner or later... or I'll be able to get windows 10 after its release... because I want to book now with the application of windows Get 10

  Hello:

  I zipped and attached a tool which should put the windows icon 10 get on the taskbar of your PC.

  To run it, unzip the file and right-click on the file and select run as administrator.

  After reading the disclaimer notice, run the first menu item to confirm your PC has the required updates.

  Then run the second menu item, and it is the one that did the trick for me.

  Then simply click on the GET W10 icon to get a software booking W10.

• HP ENVY 17 Notebook PC: Unlock BIOS

  Because im going to install ubuntu alongside windows 15.04, I need to disable secure boot. I go and I find that I can not change a lot. I did a little research and discovered that you have to "unlock" your BIOS. How can I do this?

  OS: 8.1 64-bit Windows

  PC: HP ENVY 17 Notebook PC

  BIOS: Insyde F.65, 2014-11-20

  RAM: 8 GB

  Processor: Intel Core i7-4700MQ @ 2.40 GHZ

  BIOS mode: UEFI

  SMBIOS version: 2.7

  NVM, I solved it don't answer.

• Envy dv4t Notebook: SmartPlacement on hard drive?

  Hello people,

  My younger son helps people bring their computers from the dead and lonely people gave envy dv4t Notebook in question here having decided to upgrade to a newer version. He has in turn gave it to me.

  I preferred App Defrag and after install and opening it, I see that the harddrve is not configured for SmartPlacement. Which is, of course, a major requirement for this application to function properly.

  I open the BIOS (which has a date of 2013 of origin) and see Nothing on SmartPlacement anywhere.

  Am I right in thinking, I might as well uninstall my Defrag app and just use the good old Windows Defrag?

  Thanks in advance... Mark

  God bless... Mark

  Hello new SDF15,

  Do you already have an application with a unique built-in function/feature the feature simply NEED becomes (for you) is just a function which all THE systems have?

  Well, even before receiving response from Raxco my dilemma and after watching again the problem, the answer has jumped off the screen of the laptop. 1, the hard drive is (logically) configured with the D:\Recovery of patitioned in car first on the disk. Then, of course, SmartPlacement, which is first reading the first partition is said that there is a problem here.

  The real C:\ drive shows SmartPlacement works very well!

  Once again, thank you for your patience... Mark

• HP ENVY 17 Notebook PC: HP recovery discs - are these bootable?

  If I order the recovery disks HP ENVY 17 Notebook PC (by specific product number), would I be able to recover and reinstall Windows 8 Pro in a newly formatted and repartitioned C drive and be able to activate my Windows?

  Thank you

  Rico

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  The support of HP recovery that order you from HP is bootable and will return your computer to a factory State. If the media is going to install Windows 8 Pro is based on the exact specification of your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP ENVY 15 Notebook PC: unknown device on PCI Express Root Complex

  Gentlemen.

  Recently bought the HP Envy laptop and upgraded to Windows 10 immediately.

  HP ENVY 15 Notebook PC
  15 - k200na (ENERGY STAR)
  L0C83EA #ABU

  10 64-bit Windows Home

  Device reporting Manager: unknown device on PCI Express Root Complex

  Hardware ID:

  ACPI\VEN_HPQ & DEV_6007
  ACPI\HPQ6007
  * HPQ6007

  have been unable to solve together searched a lot!

  Can you please help.

  Thank you

  Dave

  Hi, Dave:

  You need this driver...

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• Hard drive error (HP ENVY 17 Notebook PC, PN: A9P79UA #ABA)

  at startup, I get the Message disk error hard and please run the hard drive test in the System Diagnostics

  Hard drive 1 (3F1)

  F2 System Diagnostics

  For more information, please visit: www.hp.com \go\techcenter\startup

  I ran boot test, 100% of the system memory is ok, but it took a lot of time

  I ran disk hard test then I get this message

  "Main hard drive Self Test

  Quick test

  Red, I get (HDD 1 fault)

  Hard drive Self Test

  Full test

  Red, I get (HDD 1 fault)

  INTELLIGENT testing of output control

  "color yellow, I get (SMART hard drive SPENT).

  Please how can I solve this urgent problem. Moreover, how much disk hard comes with the hp envy 17 notebook pc?

  HP ENVY 17 Notebook PC, PN: A9P79UA #ABA {deleted private information}

  Here are the specifications of your laptop of HP ENVY 17-3077NR. You receive the error code indicates that your computer's hard drive has failed or is about to fail. To resolve this issue, you must replace the hard drive with a new one that is similar to the original hard drive. It is clear this form, this model uses a single 750GB 2.5 "SATA hard drive.

  Once you replace the hard drive, you will need to use your HP recovery disc set staff to return the computer to a factory State. If you don't create these disks, you may order from HP or third-party provider ComputerSurgeons.com. If the figure 25 Windows product key on your computer is still readable, you can download Windows and install it using the product key on your computer.

  Please click the White Star of KUDOS to show your appreciation

• HP Envy M6-1151sa: 10 Windows upgraded and lost HP support.

  So I've recently upgraded to Windows 10 and installed a clean place. Afterewards I can't find HP support or feel Cool and the Beats Audio provided with my laptop original device. Is it possible to get these back?

  Windows 8 download page:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-M6-notebook-PC-series/5296045/model/5322223#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Drivers HP ENVY 17 Notebook PC

  Hello! I still need your help.  my new laptop is an HP ENVY 17 Notebook PC and I installed Windows 7 and now I can't find a driver.  Please help with drivers:

  HP ENVY 17 Notebook PC

  Series:[redacted for privacy]

  Product: F7T68EA #ABU

  Model: 17-j130ea

  I collected and downloaded all the necessary drivers for your system compatible with Windows 7 64 bit. You can download it from the following link:

  FTP://FTP.USA.HP.com/notebook/Pongo%201.0_HP%20ENVY%20TouchSmart%2017.zip

  Login: win7
  Password: R6yq * ET2

  NOTE: The file size is about 1.5 GB.

  If you still need the missing drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• HP Envy T Notebook PC: Intel HP x 64 graphics card "stopped".

  I have a HP Envy TS15 Notebook PC with Intel HD Graphics graphics card 4000 and have had problems of graphics, since I bought it - applications such as Netflix and Hulu and virtually no games that it either - is carried out on it, all reports drivers graphic must be updated. Finally, it occurred to me to check the properties of the device for the driver, and he says "Windows has stopped this device because it has reported problems. (Code 43) »

  I suspect that is why graphics are so flaky. How can I get a fix for this card?

  Hello @amwilson ,

  Welcome to the HP Forums!

  I understand that the graphics card is an error Code 43 Device Manager. I'll do my best to help you! In general, this error indicates that certain functions of the device doesn't have, which means it could be a hardware problem.

  To resolve this problem, follow all the steps in this document to Microsoft: Code 43: Windows has stopped this device because it has reported problems

  If these steps do not work, I would contact HP support by phone using equipment. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns. Thank you for bringing This problem on the HP Forums. Have a great day!

  Mario

• Install windows 7 in Envy DV7-7234 with Windows 8 with win7 dual boot and windows 8

  I can install windows 7 in Envy DV7-7234 with Windows 8 buth with dual boot: win7 and windows 8?

  Installing Windows 7 on your HP ENVY computer Notebook dv7-7234nr is not supported by HP. In addition, no Windows 7 driver is listed on HP Software and Driver Downloads page for your computer.

  HP does not recommend installing Windows 7 and it will support the installation of Windows 7 on a computer comes with Windows 8. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not support some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the ' settings of BIOS ' settings below page;

  

  Then, start Windows 8 and run the console 'disk management '. Using "Shrink Volume", reducing the size of the "C:" partition about half of its original size. Name of the partition "C:" to something like "Windows 8". Now, start the computer from the Windows 7 DVD, making sure to select "UEFI - internal CD/DVD" or "UEFI - ATAPI CD/DVD ' and not ' Legacy - CD/DVD internal."  (I recommend using a disc of Windows 7 SP1latest drivers have been included in this topic. The use of the SP1 disc usually resolves most disk hard AF and other issues. )

  Install Windows 7 on the partition without label that was established earlier when you shrunk the partition "C:". Continue to install WIndows 7 by / responding to all the guests. Once you download Windows 7 on your computer, we have to track down the compatible drivers for it. Please list all the "hardware ID" for unknown or missing devices.

  Please send Bravo