HP envy 700-074 BIOS

Similar Questions

• HP Envy 700-074 model BIOS corruption, or bug, etc.

  Hello

  My name is Patrick Barker, and I'm an analyst of the blue screen of death core Dump. During the last week, I ran into two users having a HP Envy 700-074 computer and experience the same exact bug check. The first time I met such a bug check, I imagined that the user may have simply received a system with a bad BIOS, things like this happen in computers all the time. Well, the user contacted HP and replaced it with the exact same model course, and he had the same problem.

  Right at that time, I discovered another user knows exactly the same problem as the previous user. With a consistency like this, I wonder if there is a corruption of the BIOS and/or the bug associated with this particular model?

  What is happening is that there is a frequency of verification of bug ACPI_BIOS_ERROR (a5) .

  This bug check indicates that the BIOS Advanced Configuration and Power Interface (ACPI) computer is not fully compliant with the ACPI specification.

  Error checking A5, {1000, 0, 80001000, 25}

  The 1st setting has always been far 1000.

  1000 = ACPI_BIOS_USING_OS_MEMORY.

  ACPI has been a fatal error during the processing of a region of memory operation. The region of operation memory tried memory card which has been attributed to the use of the OS.

  This bug check usually appears in these 2 scenarios:

  1 BIOS bug / damaged and must be resolved with an update or go back to the manufacturer.

  2 Rootkit (not very common).

  In our case, it is #1. Exactly, what is happening? I can't be quite too sure due to having to have a version controlled ACPI.sys to debug such a question and with what is happening on another system user, I won't use them as guinea pigs. However, this seems a general problem from what I can tell about this model BIOS. For reference, a BIOS update is not currently available for this specific model, so not quite sure that the end user can do, especially if their systems of replacement of the same model have the same question over and over again.

  -----------------

  Two threads where it occurs, I will update if I see anymore:

  1. Windows 8 crashes after being in the mode 'sleep' - Microsoft Community

  2. brand new computer under Windows 8 - 2 accidents in first day - Microsoft Community

  Why I write this here? Well, on the one hand, I can't find a place to contact HP and / r supports directly without really own a HP machine. So, with that said, two questions:

  1. is there a way to contact HP directly on this issue?

  2. is it and/or any other person with this specific model of HP's have this problem?

  Kind regards

  Patrick

  Hi Patrick,

  This forum is mainly of volunteers, and HP has no official presence here.    I ask that your question is raised.  In the meantime, you or your client should open an official ticket with HP support.  These PC is still covered by the warranty.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• HP Envy 700-074 Graphics Card problem Windows 8

  Greetings,

  I recently bought the HP ENVY 700-074 (http://http://h10025.www1.hp.com/ewfrf/wc/product?cc=us & dlc = in & lang = to & lc = in & product = 5371495).

  Initial setup went fine without any problem.  I replaced the power supply so that I could add the graphics card from my old computer.  The power supply and graphics card worked perfectly for my old computer.  Feeding is a BFG Tech GX 550 watt modular power supply series.  The graphics card, I have installed is the Nvidia 560ti.

  The problem is that, when I start the computer, my screen goes to sleep (as there is no signal) until the login Windows 8 screen lights up. At this time, my screen lights up and it is normally.  However, if updates or restarts the computer, the screen turns off again and he returned sometimes when loading the desktop computer.  I tried to get into the BIOS to see if I could disable the onboard graphics, but I have been unable to access BIOS because I don't see anything on the screen during startup.  I removed the Nvidia card and returned to the use of the integrated graphics card and everything is back to normal.  I managed to enter the BIOS at the time here, but I don't see any possibility to disable the integrated graphics card or use the PCIe as main display (unless I missed something).

  I also noticed that Windows 8 shows I have 2 screens installed when only 1 is installed physiclaly.  My HP (HP 2009 m) monitor is listed in Monitor 2 and I initially had to go through the windows to get my HP Monitor to display the entire desktop (as it origionally extended from the start, the desktop computer).  However, number of monitor 1 is listed as monitor of generic cards.  Thinking that the computer used the non-existent monitor like main display when starting, I deleted the generic monitor than to have to reinstall windows.  I also tried to disable, but the problem persists.

  I guess that there is a conflict between the integrated graphics card and the Nvidia card.  However, I assumed that the edge will be disabled automatically after inserting a card into the PCIe slot as the integrated graphics card watch is no longer under device mananger.

  Hello:

  Have you changed the settings of the BIOS 2 (required) before installing the video card no HP?

  If this isn't the case, please read the info on the link below.

  http://support.HP.com/us-en/document/c03653200

• HP Envy 700-074 custom ' mode "Eve"

  1. Windows 8
  2. HP Envy 700-074 with monitor from 2005.
  3. Keyboard and mouse wireless
  4. 2005 via USB HP printer (don't know the model right now, I'm at work)
  5. The screensaver is the folding at home screensaver.
  6. HP Envy bought in February 2014.

  The computer enters mode "Eve" from one day to the next, or I hit function-SleepButton. Monitor goes into mode with a yellow economy light energy.

  When I try to wake the computer via the keyboard, the monitor is from yellow to green, which means that the PC is a signal, the fans of PC and the light is on, but the screen remains black.

  Tried to update the bios by using this link , but I get an error every time:

  "This update of the BIOS is not compatible with this unit". I think it's BIOS has not confirmed the update via msinfo32. BIOS version is still 80.15. Option to upgrade button is gray, this button on the same BIOS update screen as 'Save BIOS to flash drive' and 'Save BIOS file.

  The issue is not that the keyboard is not set to wake up the PC, as the monitor light goes from yellow to green, when I type any key of the keyboard. Which indicates that the PC is a signal.

  What are my options here?

  Thank you.

  Your update to the newest BIOS would not go. So I installed all the updates Windows 8, including those in option, and it seems now out of fashion 'sleep'. Thank you.

• HP Envy 700-074: SM Bus controller driver

  I recently bought the HP Envy 700-074 a member of the family who tried from a Mac. Needless to say, it did not work. After several frustrating months of trying to learn Windows 8 I dropped and classified down to Windows 7. This is where my problems started. Now, Miss me all the types of drivers. I installed some of them, but it's just one after the other. That is asking is the SM Bus controller now. But the utility update drivers Intel always tells me that I need the Iris of the Intel and the graphic Driver HD for Windows * 7/8/8.1 64 bit, I have installed.

  I'm so frustrated. I've never had these problems with a computer before, especially when you install a different program. I am a user of Windows/PC for more than 20 years. It shouldn't be this hard.

  Hello

  Try:

  https://Downloadcenter.Intel.com/download/20775

  Concerning

• HP ENVY 700-074: How do the BIOS on my computer?

  My computer works fine. But I would like to know which key to press while the operating system is coming to get the BIOS. I have a HP 700-074 running Windows 10 (64-bit). The processor is an Intel core i5-4430. This computer was purchased in July 2013.

  Hello

  Typing away, as soon as you turn to go to the Start Menu - from here to the ESC key, you can press f10 to open the Bios Menu.

  Kind regards

  DP - K

• HP ENVY 700-030qe: BIOS updates for my HP desktop computer

  I have a desktop HP ENVY 700-030qe with Windows 8. While looking through the updates of software available for my system, I have seen two listed in the BIOS:

  (1) HP Compaq consumer Desktop PC BIOS for ROM family SSID 2AF3 dated October 2014.

  (2) HP Desktop BIOS update system for PC HP ENVY 700/800/810 with 2AF3 family ROM dated May 2014.

  1. How will I know what family of ROM BIOS I have? I have pictures of all the screens of BIOS that I could get and nothing mentioned family BIOS ROM. I still have the BIOS original version KAI 80.07.

  2. the two updates apply to my computer? The wording is confusing. It seems that only the second apply to my system unless one applies to a more general category of the office. If both apply, as the first is the most recent, which would be the one to use?

  3. There is an issued for the BIOS in June security update that I ran across here. Which does not appear in the update list. Why would that not replace the other? Can I assume that the October update would include this security update?

  Thank you

  JohnD

  Hello @jpd_az,

  I read your post about how you're looking to update your system BIOS and what version of the software to install. I'd be happy to help you in this case!

  The version of the BIOS, you want to download and install is 80.23 A, which can be downloaded by clicking on the link below:

  • Update BIOS HP Compaq consumer desktop PC (SSID family ROM 2AF3)

  To update this software, I recommend that you follow the steps described in this document on the updates to the BIOS.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• WANT to 700-074: BIOS update failed HP ENVY 700-074

  I intend to update Windows 10 soon.  HP recommends to update the drivers and BIOS before upgrade.  the original BIOS is listed as FRIEND 80.15 in msinfo32 dated 19/09/2013 (and in the setup of the BIOS as KAI 80.15). The computer came with 8 VICTORY and has been updated to WIN 8.1.  I tried to update the BIOS with the update listed for computers 700 - 0xx WANT to sp66018.exe.  I downloaded and ran the update with the HP Support assistant help.  A DOS window appears, and the update completed.  Norton AntiVirus has been disabled and all programs were closed during installation.  I created a USB file as the recommended window.  After that restart the BIOS version has not changed... Even after several reboots (and stops) and disconnect the power cord (I did some housekeeping to clean the inside of the computer of the dust) the version of the BIOS is still the original.

  What is the correct BIOS update?  There are two listed for my machine - 80.20 Rev. (I used) may 28, 2014

  and 80.24 Rev.A 7 April 2015

  Which is the correct one?  I don't want to install a bad!

  It is possibly disable startup secure in the BIOS for the update to be successful?

  Apparently, the dates are correlated with the version I had.  I tried to install one, be one originally installed... I installed the 80.24 Rev A version dated April 7, 2015 and it updated without problems.

• HP ENVY 700-074: how to enter the BIOS on HP ENVY700 - 074 Office to change of dedicated vram

  Hello and good day, I tried to get into the BIOS to change my vram dedicated to 1 GB, right now, I have 128 MB of vram. whenever I press f10, my pc from hewlett packard config and shows no possibility to change my dedicated vram. Can someone help me? Thank you.

  Andherewego, welcome to the forum.

  You press the correct key (F10) to enter the BIOS setup.  However, I do not think that you can change the setting of VRAM.   Generally, HP does not provide this option.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP ENVY 700-414: BIOS for HP envy 700 414

  When you use the bios update site I find only bios for 2af3 and 2b 17... ssid SSID is not my ssid. My ssid is 2af7. would it not be possible to get a link to the latest bios for that motherboard. Thank you!

  Hello

  Currently, HP has not posted all the drivers for the 700-414 envy.

  See if the latest version of the HP Support Assistant identifies a version of BIOS later.

  Try this link for the latest version of HP Support Assistant.

  The drivers or BIOS updates missing problems were reported at HP.

• HP ENVY 700-074 Desktop PC: Graphics driver is not up to date

  Hello, I was trying to update my driver of Intel 4600 Graphics for many months now desperately and it did not work. There is currently a problem with my graphics driver (it does not play in one of my pc games, they the accident that I start up) and I was recommended by various people to update my graphics driver. I tried using the Intel Web site to update my driver, but since it has been changed by the manufacturer would not. HP support for my computer for the driver downloads and software did not work, either I get erroer - 259, as the version he tries to download and install a version lower than what I currently have installed (Version 10.18.10.3621). I don't know what to do when I searched hard for a higher version than what I have installed.

  Hello:

  See if David at the link below works for you too...

  http://h30434.www3.HP.com/T5/notebook-video-display-and-touch/HP-envy-vdeo-drivers-are-way-out-of-date-and-HP-won-t/m-p/5663186#M133496

• install failure: 650ti gtx on hp envy 700-074

  I had enough psu 550w, but I don't see black screen just like I have enough psu...

  650ti not compatible with win8 GTX? cuz it worked fine with win7

  someone knows how to fix this?

  Hello:

  Welcome to the unknown world of the W8 PC.

  There are two bios settings, you will need to change when you install a nonstandard HP video card.

  You need to remove your new card, so you have a screen to access your bios, change settings, install the new card, and you should be good to go.

  See this link for what you do.

  http://support.HP.com/us-en/document/c03653200

• HP ENVY 700-074: upgrade of processor (i5 to i7 4430 4790)

  Hi, I wonder if I need to update my BIOS, if I were to be upgraded to an i7 4790, as I've heard from others is with boards z87 they needed to update before that their computer would turn with haswell refreshment processors and if so how would go on it.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03787848

  http://support.HP.com/us-en/document/c03748942

  @gengar, welcome to the forum.

  Normally, and I say normally, if the processor is supported by the motherboard and the 17-4790, you should not have to update the BIOS.  However, if you do, here are HP software and driver downloads for the motherboard.  There are two updates to the BIOS.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Envy 700-074: Bluetooth controller driver

  Now, he is asked to the bluetooth controller driver. Suggestions anyone?

  Resolved talk SM Controller Driver to Terminator.

• Pavilion Envy 700-074: enumerator Microsoft Bluetooth Code 10

  I came across a problem with a yellow exclamation mark for Microsoft Bluetooth Device.  It shows an incomplete pilot.  I have read through the various errors and suggestions for other people on the forum, but it does not really my problem.  The first thing I did was uninstall the driver and the rebooth my computer, but the same error comes back and I can't find anything on the support page for my model.  The computer seems to work fine without this driver, but the exclamation point is indicating a problem.   Why I even checked my system is because my card reader quit working and I was trying to solve this problem when I discovered the error THE.  The card reader problem is always there as well.  For any help or suggestion would be appreciated.  I bought a card reader for the problem but I fear if something will follow other problems.

  NancyZ

  I think I solved my problem.  10.0.10586.0 driver version refers to a mouse, but my mouse was very well so when I went in my devices to see what was hooked and am completely down he showed that a fitbit attached as "One" with a question mark next to it.  When I went into the properties he had nothing and he indicated was not connected because it lacked drivers.  I think it was a hold during a previous fitbit that I had connected but no longer use.  I just deleted the "one" and then restarted my computer.  He did not come back and in my sysstems the Bluetooth enumerator THE not displayed with a yellow exclamation point.  So far, everything seems to work on my computer.  In regards to my card reader, it is only the card compact flash that he can't read, but other cards can be read very well, so unless something happens that I think I'm okay just by using a card reader.