HP ENVY 700-074: How do the BIOS on my computer?

Similar Questions

• HP ENVY 700-074: how to enter the BIOS on HP ENVY700 - 074 Office to change of dedicated vram

  Hello and good day, I tried to get into the BIOS to change my vram dedicated to 1 GB, right now, I have 128 MB of vram. whenever I press f10, my pc from hewlett packard config and shows no possibility to change my dedicated vram. Can someone help me? Thank you.

  Andherewego, welcome to the forum.

  You press the correct key (F10) to enter the BIOS setup.  However, I do not think that you can change the setting of VRAM.   Generally, HP does not provide this option.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• PC HP ENVY 700 series: How do I enter the BIOS settings

  How can I access the BIOS on this computer settings?

  Hello

  Start typing the ESC key after turning on the PC.

  Another option is to enter: change of advanced boot options on the start screen.

  You can also check out this other method.

• HP envy 700-074 BIOS

  OS 8.1

  ENVY model 700-074

  I tried to get into the Bios of my computer without success. I restarted the computer and pressing ESC, F1, F2, F10, F11 and F12 does not. The Lockscreen computer ({?, I don't know what it's really} poster and when a key is press the password screen is displayed.) Enter the password to get to the start screen. I was not able to access the bios screen.

  Page status of password, I can change my password by accessing Account.live.com. It has all the information that the BIOS would have.

  How in the BIOS?

  Are their manual for this computer? And where are they?

  I'm learning my computer and software and zero.

  Tazw

  Hello:

  You can see if this info matches your screen that I found the procedure for W8.1

  http://www.thewindowsclub.com/access-UEFI-firmware-settings-Windows-8-1

  If it does not, unfortunately, I wouldn't have any other suggestions.

• HP Envy 700-074 model BIOS corruption, or bug, etc.

  Hello

  My name is Patrick Barker, and I'm an analyst of the blue screen of death core Dump. During the last week, I ran into two users having a HP Envy 700-074 computer and experience the same exact bug check. The first time I met such a bug check, I imagined that the user may have simply received a system with a bad BIOS, things like this happen in computers all the time. Well, the user contacted HP and replaced it with the exact same model course, and he had the same problem.

  Right at that time, I discovered another user knows exactly the same problem as the previous user. With a consistency like this, I wonder if there is a corruption of the BIOS and/or the bug associated with this particular model?

  What is happening is that there is a frequency of verification of bug ACPI_BIOS_ERROR (a5) .

  This bug check indicates that the BIOS Advanced Configuration and Power Interface (ACPI) computer is not fully compliant with the ACPI specification.

  Error checking A5, {1000, 0, 80001000, 25}

  The 1st setting has always been far 1000.

  1000 = ACPI_BIOS_USING_OS_MEMORY.

  ACPI has been a fatal error during the processing of a region of memory operation. The region of operation memory tried memory card which has been attributed to the use of the OS.

  This bug check usually appears in these 2 scenarios:

  1 BIOS bug / damaged and must be resolved with an update or go back to the manufacturer.

  2 Rootkit (not very common).

  In our case, it is #1. Exactly, what is happening? I can't be quite too sure due to having to have a version controlled ACPI.sys to debug such a question and with what is happening on another system user, I won't use them as guinea pigs. However, this seems a general problem from what I can tell about this model BIOS. For reference, a BIOS update is not currently available for this specific model, so not quite sure that the end user can do, especially if their systems of replacement of the same model have the same question over and over again.

  -----------------

  Two threads where it occurs, I will update if I see anymore:

  1. Windows 8 crashes after being in the mode 'sleep' - Microsoft Community

  2. brand new computer under Windows 8 - 2 accidents in first day - Microsoft Community

  Why I write this here? Well, on the one hand, I can't find a place to contact HP and / r supports directly without really own a HP machine. So, with that said, two questions:

  1. is there a way to contact HP directly on this issue?

  2. is it and/or any other person with this specific model of HP's have this problem?

  Kind regards

  Patrick

  Hi Patrick,

  This forum is mainly of volunteers, and HP has no official presence here.    I ask that your question is raised.  In the meantime, you or your client should open an official ticket with HP support.  These PC is still covered by the warranty.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• HP Envy 700-074 Graphics Card problem Windows 8

  Greetings,

  I recently bought the HP ENVY 700-074 (http://http://h10025.www1.hp.com/ewfrf/wc/product?cc=us & dlc = in & lang = to & lc = in & product = 5371495).

  Initial setup went fine without any problem.  I replaced the power supply so that I could add the graphics card from my old computer.  The power supply and graphics card worked perfectly for my old computer.  Feeding is a BFG Tech GX 550 watt modular power supply series.  The graphics card, I have installed is the Nvidia 560ti.

  The problem is that, when I start the computer, my screen goes to sleep (as there is no signal) until the login Windows 8 screen lights up. At this time, my screen lights up and it is normally.  However, if updates or restarts the computer, the screen turns off again and he returned sometimes when loading the desktop computer.  I tried to get into the BIOS to see if I could disable the onboard graphics, but I have been unable to access BIOS because I don't see anything on the screen during startup.  I removed the Nvidia card and returned to the use of the integrated graphics card and everything is back to normal.  I managed to enter the BIOS at the time here, but I don't see any possibility to disable the integrated graphics card or use the PCIe as main display (unless I missed something).

  I also noticed that Windows 8 shows I have 2 screens installed when only 1 is installed physiclaly.  My HP (HP 2009 m) monitor is listed in Monitor 2 and I initially had to go through the windows to get my HP Monitor to display the entire desktop (as it origionally extended from the start, the desktop computer).  However, number of monitor 1 is listed as monitor of generic cards.  Thinking that the computer used the non-existent monitor like main display when starting, I deleted the generic monitor than to have to reinstall windows.  I also tried to disable, but the problem persists.

  I guess that there is a conflict between the integrated graphics card and the Nvidia card.  However, I assumed that the edge will be disabled automatically after inserting a card into the PCIe slot as the integrated graphics card watch is no longer under device mananger.

  Hello:

  Have you changed the settings of the BIOS 2 (required) before installing the video card no HP?

  If this isn't the case, please read the info on the link below.

  http://support.HP.com/us-en/document/c03653200

• HP Envy 700-074 custom ' mode "Eve"

  1. Windows 8
  2. HP Envy 700-074 with monitor from 2005.
  3. Keyboard and mouse wireless
  4. 2005 via USB HP printer (don't know the model right now, I'm at work)
  5. The screensaver is the folding at home screensaver.
  6. HP Envy bought in February 2014.

  The computer enters mode "Eve" from one day to the next, or I hit function-SleepButton. Monitor goes into mode with a yellow economy light energy.

  When I try to wake the computer via the keyboard, the monitor is from yellow to green, which means that the PC is a signal, the fans of PC and the light is on, but the screen remains black.

  Tried to update the bios by using this link , but I get an error every time:

  "This update of the BIOS is not compatible with this unit". I think it's BIOS has not confirmed the update via msinfo32. BIOS version is still 80.15. Option to upgrade button is gray, this button on the same BIOS update screen as 'Save BIOS to flash drive' and 'Save BIOS file.

  The issue is not that the keyboard is not set to wake up the PC, as the monitor light goes from yellow to green, when I type any key of the keyboard. Which indicates that the PC is a signal.

  What are my options here?

  Thank you.

  Your update to the newest BIOS would not go. So I installed all the updates Windows 8, including those in option, and it seems now out of fashion 'sleep'. Thank you.

• HP Envy 700-074: SM Bus controller driver

  I recently bought the HP Envy 700-074 a member of the family who tried from a Mac. Needless to say, it did not work. After several frustrating months of trying to learn Windows 8 I dropped and classified down to Windows 7. This is where my problems started. Now, Miss me all the types of drivers. I installed some of them, but it's just one after the other. That is asking is the SM Bus controller now. But the utility update drivers Intel always tells me that I need the Iris of the Intel and the graphic Driver HD for Windows * 7/8/8.1 64 bit, I have installed.

  I'm so frustrated. I've never had these problems with a computer before, especially when you install a different program. I am a user of Windows/PC for more than 20 years. It shouldn't be this hard.

  Hello

  Try:

  https://Downloadcenter.Intel.com/download/20775

  Concerning

• How to configure HP ENVY 700 - 210xt to install the graphics card EVGA 650 TI boost.

  Can someone tell me how to install the graphics card EVGA 650 TI boost in the

  HP ENVY 700-210xt

  Product number: E9G99AV

  I replaced the power supply with Corsair RM 650 watt power supply that works very well. Now, I want to go to the graphics card EVGA 650 TI boost. Except, I can't get the driver to load with period of installed equipment. When I put the card into the PCI 16 x slot the computer starts with a blank screen. I pass the DVI video port old computer and the new port card white screen of same at startup. If I turn the PCIe port disabled in BIOS, it starts with the embedded video, but same thing impossible to load drivers that are not able to locate the new video card hardware. Makes me crazy! I don't know that I don't know how to configure the Bios correctly or something. Can anyone help?

  Hello:

  Please see my response to your other post on the link below.

  http://h30434.www3.HP.com/T5/desktop-hardware/how-to-configure-to-install-EVGA-650-TI-boost-video-car-in/m-p/3117171#M71438

• WANT to 700-074: BIOS update failed HP ENVY 700-074

  I intend to update Windows 10 soon.  HP recommends to update the drivers and BIOS before upgrade.  the original BIOS is listed as FRIEND 80.15 in msinfo32 dated 19/09/2013 (and in the setup of the BIOS as KAI 80.15). The computer came with 8 VICTORY and has been updated to WIN 8.1.  I tried to update the BIOS with the update listed for computers 700 - 0xx WANT to sp66018.exe.  I downloaded and ran the update with the HP Support assistant help.  A DOS window appears, and the update completed.  Norton AntiVirus has been disabled and all programs were closed during installation.  I created a USB file as the recommended window.  After that restart the BIOS version has not changed... Even after several reboots (and stops) and disconnect the power cord (I did some housekeeping to clean the inside of the computer of the dust) the version of the BIOS is still the original.

  What is the correct BIOS update?  There are two listed for my machine - 80.20 Rev. (I used) may 28, 2014

  and 80.24 Rev.A 7 April 2015

  Which is the correct one?  I don't want to install a bad!

  It is possibly disable startup secure in the BIOS for the update to be successful?

  Apparently, the dates are correlated with the version I had.  I tried to install one, be one originally installed... I installed the 80.24 Rev A version dated April 7, 2015 and it updated without problems.

• 13 - j002dx: HP ENVY x 2-reset of the BIOS password

  I have a HP Envy X 2 which is asking to specify a password to enter BIOS setup. I apparently lost the password. I am able to start windows, but cannot enter the bios setup. How can I reset the password?

  After you have entered the incorrect password three times it gives the stop code: 50495488

  @TURBO_NERD

  Enter 45593408

  Kind regards

  DP - K

• HP Envy 700 215Xt: request info for BIOS described below

  I hope I'm posting in the appropriate section, basically a beginner in this room. I have a desktop HP Envy 215XT 700 with Windows 7 Pro 64 Bit OS. My interest is in the BIOS, and basically, I want to understand better. What I would like is to have a manual or guide for this BIOS, if there is such a thing. For example, if you have more than one drive installed, or even the DVD drive and HDD, other places to start from, if bring you up the BIOS screen, then select F10, you can select a boot device. You can also do this in F9. I have to do one, two or what? And in what order. I'm starting to think that this computer does NOT like the 2 discs hard bootable installed, period. A bootable, one works better,

  2AF7 system board / Cfg, ID 1.00 product / Bios Rev MEM v80.16 / CPU Intel core 17-4771 3.50 GHz cpu.

  1 can or I would be able to run (2) 1 terabyte drives in the computer, and can both be bootable or just one?

  2. does anyone know if there is a BIOS update or a newer firmware to do this, my opinion is not.

  3. I have here available, a person, a sort of User Guide with details of Setup when using this BIOS to go n informed approach?

  Thank you.

  John

  [email protected]

  Hello jpw389 ;
  
  Let me welcome you on the HP forums!
  
  I read your post on the BIOS info and wanted to help.
  
  You can have any number of disks bootable on a PC, but the BIOS has a defined order in which he sees these readers, and it will attempt to boot an OS in that order.  So, with more than one bootable disc to begin the second drive, you must do one of the following:

  (1) change the order of the drives in the list of the BIOS to move the other drive to the top of the list

  2) press the function key that allows you to select a drive to boot from

  The difference in the use of these two is that the first change is permanent, the second for a boot.

  Regarding versions of BIOS, the link is on the Page of the product HP to Win7 for your PC: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-700-Desktop-PC-series/5399651/model/6667346

  Under the BIOS section, you will see two updates to the BIOS.  You can check yours to see what version of BIOS uses at present.  There is no other update BIOS.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Satellite R830: How do the BIOS settings password protected?

  Hi all

  I installed a software protection against theft in my Satellite R830, but he suggested that I adjust the settings in the BIOS so that it will start only from the hard drive, and to make sure that no one else can modify it (if it is stolen), the BIOS settings are protected by Word.

  Can someone tell me how to access the BIOS at startup settings upward?

  Hello

  You can set the BIOS settings by setting the BIOS password.
  If someone would like to change the BIOS settings, the password of the BIOS would be necessary.

• How downgrade the BIOS on Tecra S11 - boring CPU

  I have a BIOS that is "solve" the problem of high pitched noise high on the i5 CPU.
  But I have the latest version of the BIOS and since then I can not downgrade to the older BIOS which allows to "solve" the problem.

  * My question is how do I get the BIOS? *
  Because I send my Toshiba to RMA more because they will not fix it!

  My Tecra S11 went to RMA 2 × and 2 different authorized Toshiba service approximately 1 month partner. None of them repaired my laptop! More annoying is that the Hungarian services are absolute useless! I have a 2 year problem, with the high pitched noise high CPU.

  They have not replaced the defective processor, they replaced the motherboard! for no reason. OMG!
  Be very careful when you buy PC Toshiba laptop in Hungary and is not due to lack of the Toshiba but authorized service partners!

  Please, Toshiba do something!

  Hello

  Why do you think that CPU must be replaced?
  I guess that the technicians ran some diagnostic tests which can detect defective parts, I guess the CPU was not affected, but the real question was the motherboard (because it was replaced).

  However, what s your problem exactly?
  Why you want to downgrade the BIOS?

• How downgrade the BIOS on Portege Z30 - B?

  Hi all

  I updated the BIOS on my laptop Z30-B-119, and it is much worse than the original BIOS, so I want to downgrade it.
  There is no way to save the original BIOS during the update and the previous BIOS is not available on the site.

  Someone has the original BIOS and knows how to extract?

  Maybe someone knows how to contact Toshiba technical team directly? (Don't see what they have implemented in new BIOS, I have no hope they read on this forum or user opinions).

  If you're wondering why I want to downgrade and what's wrong with him, see below for an explanation.

  I was convinced that the new BIOS might resolve the problem with the fan, which works well too early, but it turned out they made much worse! The fan will now light at 42 °. Seized 50 °, which was already a Toshiba engineers stupid choice, provided that the side of the CPU temperature is 105 °, so that they could keep the laptop quiet at least until 60 °, especially as many people's complaint of the fan in this model. Instead, Toshiba has done the opposite and lowered the temperature even more.

  How foolish choice their engineers do, I will never buy another Toshiba and will not recommend anyone buy their products. But since I have already made the mistake one bought a Toshiba laptop, I hope that I will be able to downgrade the BIOS or contact them to request an update.

  Let me know if you know how to do it.

  Toshiba Portege Z30-B-119 PT253E - 01100XPL
  This European model belongs to the PT253E series

  The Portege Z3x - B PT253U (same model) was released in the United States and it supports the same BIOS

  The BIOS for the PT253U is compatible withE -PT253 and can be downloaded here:
  http://support.Toshiba.com/support/v...tentId=4007631