HP envy 750 124: upgraded hp envy 750 124 pc

Similar Questions

• HP Envy 750-116: can anyone recommend an upgrade of the power supply for HP Envy 750-116?

  I have a HP Envy Office 750-116 and need to replace the power supply 300W with an upgrade to a more powerful.

  I was look at is CORSAIR CXM CX550M 550W 80 PLUS BRONZE or the EVGA SuperNOVA 650 G2 80 series. I have kniow that they are all two excellent PSU.

  My concern is with the connector that the 750-116 uses to the optical drive. Looks like the kind of connector you see go to a laptop, DVD player. (It of really small and is marked P5)  I have a spare part HP 460W PSU I could use, but it is not a connector that would work. So I hesitate to buy Corsair or the EVGA without knowing if I'll be able to plug into this weird DVD connector in the HP Envy.

  Someone out there has run into that and find an answer?

  Bill

  Optical drives are still a thing? Wow! Any ways OP. On these new machines. HP uses a slim with an owner drive

  Connector for it. You won't find it on the other PSU. You will have to abandon the drive if you replace the stock PSU.

• HP ENVY 137C 750: GTX 1070 for HP ENVY 750-137C graphics card upgrade

  I picked up a refurbished HP ENVY 750-137c and am currently looking to improve the graphics. I don't want to break the Bank, but I don't want it to last me a while, I'm looking at the Nvidia GEFORCE GTX 1070.

  Apart from the evolution of the needs of power, does anyone know if this card is compatible, and if there are problems with this upgrade? In addition, Nvidia recommends a diet of 500W for this card. Would be - it sufficient, or is - this genrous number? In addition, if someone has a product of power supply they would recommend for this theoretical combination, I'd greatly appreciate advice.

  Thank you!

  @Drifterx311, welcome to the forum.

  Here are the full specifications of the card on the nVidia website.  The card is double slot and 10.5 "long.  I suggest measurement of the back plate of e/s to the front of the box to see how much space is available.  I think it fits, but it will be tight.

  As you said, the specs recommend a PSU 500W (PSU).  Personally, I'd buy one at least 600 w.  This will give you extra power for peak needs.  I love Corsair products.  Here are a few PSU for you to review Newegg.  If you choose a modular power supply it will allow you to install only the cables that are absolutely necessary.  This allows for better air circulation.  The PSU is the backbone of the computer.  Read the reviews to see what users have to say about them.  A good diet will make your system run much better.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• In Envy 700 graphics card upgrade - 215 Intel 4600 with Geforce gtx 750 ti

  Hello

  I wonder to know - is it possible to update my system with the following specifications by adding a geforce gtx 750 ti (http://www.amazon.com/EVGA-Superclock-Dual-Link-Graphics-02G-P4-3753-KR/dp/B00IDG3IDO/ref=sr_1_2?s=e...

  Thank you!

  HP Envy 700xt desktop PC product number: F9A62AV #ABA

  I've upgraded graphics card than Geforce gtx 750 ti 2 GB and it works perfectly. The card doesn't need extra provides powe.

• HP ENVY 750-177c: I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected.

  I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected from the motherboard.  They have loops at the end of the wires that look like they might slip on the pins.  The wires connect to the upper part of the box of the computer.  Where to reconnect?

  Find this card in your system. It is the M2 half-bridge Wireless card.  The other end of the wires must always be fixed.  There are 2 heels left and right of the '2 '.  If everything is correct, it is your physical WI - FI antenna. Just re - stick inside the case.  The small clips are used for an external aerial connection.

  

  PS<> have a good day...

• HP Envy 750-124: cannot get into the Bios of the normal on the envy of 750-124

  I speak not normal Bios and UEFI. I've recently updated to Win 10 anniversary

  Given my http://support.hp.com/my-en/drivers/selfservice/hp-envy-750-100-desktop-pc-series/8499646/model/8819... Bios Update

  who was A0.16 Rev.A.

  Installed and it reset my settings. I need to come back here to turn back on my virtual technology. Otherwise, I can create only 32-bit VM VirtualBox

  https://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/how-to-access-BIOS-to-enable-th...

  Cannot return to normal Bios. I tried Tap the ESC which worked before, screen freezes and I hit enter and the HP logo comes up, tried to hit and also hit F10. As much as I turn power. I have a wireless Logitech K800 keyboard that worked before. I tried a usb keyboard standard ensuring they were on a USB 2.0 port. F2 to display a cold start UEFI bios.

  Them win 10 things don't me settings there, recovery, advanced. Tried all

  I was hoping that HP had fixed the enter the Bios thing with updated Bios if installed. This thing was a pain like that otherwise I'd be a camper happy with this PC, how is it you can not solve this HP?

  Because of disconnect hard drive it hangs just below ground

  The solution is

  I had installed a better Nvidia GTX-950 video card. By hitting the ESC, it hangs and nothing happens. Black screen, although you can see slightly change the colors

  Fortunately both the edge video card and the new Nvidia both using a HDMI cable. So I just plug my integrated video card. Started while typing ESC and the Legacy Bios screen selection came where I choose F10 to enter the Bios of the legacy

  When you perform an update of the HP Bios seems to put everything back by default, in other words on board, by selecting the video edge. Although you can see by selecting HDMI port at startup if you think it's ok.

  I have worked with Dell PC for 15 years to work, it does not matter what card I put in them. At the start, I hit F2 and Bios loads so that bit me. Now I know

  Hope this helps someone else.

• HP Envy 750-150: I can upgrade the GPU?

  Hey. I was wondering if it would be possible to upgrade my GPU a Nvidia Geforce GTX 960 980 on the HP Envy, as im currently saving up for a GTX 980 and im wondering if I should. Any answer would be useful.

  The differences areillustrated here.  Secure boot must be disabled, as will detect a different material. The GTX960 probably comes with the PSU 500W PSU, so you OK because it shows a configuration with the GTX980Ti file.

• HP750-124: How do I add GEforce 970 980 GPU for envy 750-124

  Just bought a 2 TB, 16G, intel i7 750-124.  y at - it space and the food to add a GEforce 970 or 980?  If so, advice on procedure?

  Hello

  You are welcome.

  I don't think so. I've never seen any.

  They all need an internal PCIe x 16 slot 2.0 or 3.0 on the motherboard.

  Jay

• HP Envy 750-229: upgrade to SSD

  Can I clone the orginal factory a Crucial SSD of 275 GB HD installed, use the SSD as drive and keep the original HD as a secondary drive?  My 750-229 want is new and no other program except Norton IS not installed. I would be grateful if the cloning instructions and installation are recommended.

  Thank you

  Hello

  1. how to shrink C:

  https://www.YouTube.com/watch?v=tJiakVgAtn4

  2. you can clone D: but it will not work after replacing the main HARD drive that why we need 1 TB. As mentioned earlier, you can create recovery (DVD or USB) set. In your case, 275 GB is simply too small and the system will stop.

  3 use the original HD as secondary drive: no problem at all, after getting the system with SSD operating condition. You can do what you like with the old HDD.

  Kind regards.

• HP Envy 750-124: HP Envy 750-124 Odense mobo not capable of 1.5V?

  The specs say it should work, or I thought

  Two plugs DDR3L DIMM 240-pin
  Supports the following:

  PC3L-12800 (DDR3L-1600)
  PC3L-10600 (1333-DDR3L)

  DDR3L is a capable bitensión SoDIMM memory, which supports the operation at 1.35v and 1.5V. DDR3L is also compatible pin with DDR3. DDR3 is a simple voltage capable memory SoDIMM, which supports 1.5V operation only.

  Started with 2 sticks 8 GB installed and got 2 short and 3 long beeps in bios. Tried a stick at the same time the permutation. I had 2 sticks no good?

  Can not find a spec sheet/manual Odense anywhere even in the Pegatron so if someone has a link please share!

  This mobo Odense is not capable of 1.5V on the memory?

  Hello

  The following specifications, your machine (not the motherboard) supports DDR3L RAM:

  http://support.HP.com/my-en/document/c04800122

  Kind regards.

• HP ENVY - 750-124 desktop: HP consumer Desktop PC BIOS Update (SSID family ROM 2 b 47) fails to install

  Update hangs during installation.

  I guess that you are once again still able to boot your computer normally. If so I wouldn't bother with this update offered by the HP Support Assistant. It may be a false signal.

  You can try to uninstall HP Support Assistant. Then, restart your computer and try to reinstall the software. You can also check the following: HP-HP Support Assistant (Windows, 10, 8) troubleshooting computers. It is useful if the installation of HP Support Assistant is part of the question.

  Let me know if this helps.

• 750 - 140z envy: envy 750-140z is compatible with AMD RX 480?

  Envy - what is compatible with AMD RX 480 750-140z? I guess I should also upgrade the PSU?

  Hi there @NicholasBraden,

  Welcome to the Forums of HP Support!  I understand that you are looking for advice with an update of the graphics card. I'm happy to give you a helping hand with this.

  Using the following sources:

  HP ENVY 750-140z computer CTO product specifications and configurable options

  HP and Compaq Desktop PCs - specifications of the motherboard, Orchid3

  Radeon™ RX 480 graphics card - amd.com

  Your system has a PCI Express x 16 (Gen 3.0) slot and a power of 300 W.

  The specifications of the AMD 480 RX do not have some details that I'm normally looking like minimum power supply requirement. On the contrary, it shows typical Board power of 150W, which is not a list of peak power.  It also does not indicate the number and type of additional power connectors are needed, or the generation of slot PCIe required.  However, your motherboard has gen 3.0 I mentioned already so it's not likely to be a problem.

  So having a typical power consumption of 150 W for the card and to be sure, assuming that your system uses near the 300 W provided by the existing power, you're looking at least 450w for common use.  I suggest to go much higher than that, probably more to 550-600 W for a replacement hard drive, but you want to know what additional connections are required and ensure that the food get you has those which are available in both the type and the number.

  There is no guarantee that any parts added to a system will be compatible, and as it is your system is not compatible if only on the question of food.

  Please let me know if this is useful, and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Envy 750-114: hp envy 750-114-added to a graphics card

  I am to buy HP Envy 750-114 and upgrade with a graphics card.  The one I found is low power, so it will be fine with the 300 watt power supply that comes with 750-114 envy.

  The problem is I want to order the video card for a refund until the PC (the refund will expire until the PC is delivered).

  The 750-114 envy will accept a card of video of the form factor ATX size 7,76 "(L) x 5" (H)?

  I'm looking at one is the Gigabyte GV-N75TWF20C - 4GI.  It's the only sub - $200 4GB video card that I found that good performance and low power requirements.

  Here's the URL for the map in question:

  http://www.Newegg.com/product/product.aspx?item=N82E16814125813

  Thanks in advance for any help!

  I just received a text with HP support session, and they indicated that the largest 4 GB card with dimensions of 7,76 "x 5" will fit in the case.

  I'm a happy camper tonight!

• HP ENVY 750-055XT: HP download win 10 for win 7

  I bought a refurb unit. He came "upgraded to win 10 64.  But there is no win 7 files to restore.  I have a new win 7 64 pro license. On the CD.   How can I install and lose 10 WIN.  I want to have anything to with win 10 in the computer.

  I have the same computer with win 7 pro 64 installed. I have raid 1 disks.  If I removed the drive in the new computer and installed one of my raid drives which would solve the problem?

  I'll have one connected to the internet and the other will have my critical files and will not have internet capability.

  @HEMI7309

  http://support.HP.com/us-en/mediaorder/HP-envy-750-desktop-PC-series/7779687/model/7805186/softwareitem/M2H64AV/STEP1

  REO

• Modle:HP Desktop - 750-11 WANTED: good graphics for desktop HP ENVY - 750-114 cards

  As the title I'm looking for a graphics card to upgrade to since that integrated is not the best. Any help will be greatly appreciated thanks. Model: HP ENVY Desktop - 750-114

  Thank you for the additional information.

  Here's a page on the cards around the price you want to pay on Newegg.com.  This will give you an idea what is available.  You should read the reviews to see what users have to say about them.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.