HP ENVY h8 - 1420t CTO: the HP ENVY h8 - 1420t CTO upgrade

I intend to update my graphics card, memory and power supply bu tI have a few questions. Can I put my HP ENVY h8 - 1420t CTO to a 750 w power supply with damaging them.

Also, I wonder how many pins I have to have for my computer. I can't specifically to locate only with the opening of my computer.

I have a core i7-3770 if that makes a difference

Hello

Use a good adjustment of the power supply replacement.  Standard power SUPPLY HP block dimensions are 5.5 "by 3.4"by 5.9".  Something more will compress the distance between the power supply and the optical drive even more complicated wiring and installation problems.  A 750 watt PSU should work but get one with the appropriate dimensions.  If you drop to the low power of some, the Corsair CS650m would be a very good choice.

If your computer is running a version of HP 8 BIOS the largest part of the most recent graphics card will work providing that they will hold.  Study it posted article.  You need to open your PC and measurement. Generally of less than 10.5 graphics cards "must adapt.

Thanks for posting on the forum.

Tags: HP Desktops

Similar Questions

  • Envy 15 k233ca: memory upgrades and hhd

    I'm trying to find out if the k233ca has a capacity of upgrade. By reading the plug here and there, the motherboard has 2 slots and there is 1 to 8 GB 1600 Mhz DDR3L module.

    When I called customer service to see if there was a favorite of the seller, they told me that the Ram was not expandable as the machine has only 1 location and tot of the MB does support up to 8 GB.

    Well...

    As a technician, I'm leaning towards believing the former rather than the latter, and since I did not open upward again, I checked Everest and it shows 2 slots, one with a 8 GB module and a location empty.

    Before I open the unit to find this information for me, I wondering if someone is more familiar with this device, or can point me to a more detailed specifications and current page?

    My questions are specifically,

    1. What is the model of the motherboard more precisely and will support 16 gig?
    2. This is a configuration of dual slot, so I can use 2 x 8 GB modules?
    3. Can I use a low latency Ram? replace the original module to match of course...
    4. Is there a QVL for this MB?

    Now for the HHD, a question... This machine will support SSD?

    Based on the HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC HP ENVY Notebook PC - Maintenance and Service Guide of m7, it seems you should be able to switch to 16 GB of RAM and an SSD as follows;

    Memory

    Two SODIMM slots
    Support of the DDR3L - 1600 MHz Dual Channel
    Supports up to 16 GB of RAM in the following configurations:
    ● 4096 MB total memory (4096 × 1).
    ● 8192 MB total memory (4096 × 2)
    ● 8192 MB total memory (8192 × 1).
    ● 12288 MB total memory (8192MB 4096)
    ● 16384 MB total memory (8192 × 2)

    Hard drives

    Supports 6.35 cm (2.5 in.) 9.5 mm hard disks (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)
    Storage SATA m2 (Port0)
    Accelerometer / HDD protection support
    Supports the following drives:
    ● 1.5 to 5400 RPM, 9.5 mm
    ● 1 TB 5400 RPM, 9.5 mm
    ● 750 GB 5400 RPM 9.5 mm
    ● 500 GB 5400 RPM 7mm / 9.5 mm for PC portable HP ENVY 15 only
    The hybrid configurations
    ● 1 TB 5400 + 8 GB NAND hybrid disc HARD 9.5 mm
    ● 750 GB 5400 + 8 GB NAND HARD 9.5 mm drive hybrid
    SSD drive

    Only configured with up to 8 GB system memory:
    ● 256GO M.2 SATA (MLC)
    ● 256GO M.2 SATA (TLC)
    Double storage configuration for the HP Envy 17 computer models
    ● 1 TB (5400) 9. 5 mm + 256 GB SSD SATA in m2 (TLC)
    ● 1 TB (5400) 9. 5 mm + 256 GB SSD SATA in m2 (MLC)

    Please note that it requires an extensive disassembly and reassembly of the computer to make these improvements, including

    remove, replace or loosening the screws up to 83. Also, note that other RAM/HDD/SSD configurations can run on this computer. It may be possible to have a facility that includes 16GB of RAM, a standard SATA III SSD and/or m2 SATA SSD card, but you will have to experiment to see specifically what works on your model.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Envy 15 j170np: Ram upgrade

    Hello

    I'm doing an upgrade of RAM in my HP Envy 15 J170NP. When I checked the RAM that was already in the pc, I discovered that it is a DDR3 PC3L type and the one I have here is a DDR3 PC3. If I can have these together? I heard that voltage of the taking in charge of some pc and I wonder if this is the case.

    Kind regards

    João

    From the Manual:

    Customer module accessible/upgradable memory two slots in favor DDR3L channel (1600 MHz)

    If not... it might work to some extent but you would risk instability in the system. It is designed to operate at 1.35 volts memory.

  • There is NO selection update software on my phone! How are Iphone 3 # IOS updated? It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

    There is NO selection update software on my phone! How are Iphone 3 # IOS updated?

    It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

    The model number you have listed is an iPhone 4, which can be upgraded to iOS 7.1.2. To have the option to update software on the phone, you need at least iOS 5, otherwise you will need to use iTunes on your computer sync to perform the upgrade.

  • I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

    I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

    Hi sonalnj,

    I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

    According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

    iPhone 6 s Tech Specs
    http://www.Apple.com/iPhone-6s/specs/

    Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

    OS X Lion mountain
    http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

    Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

    Update of OS X El Capitan
    https://support.Apple.com/en-us/HT201475

    Nice day!

  • I changed my email online password and now I can't any message in the Mail application. How to upgrade the application Mail with my new password?

    I changed my gmail online password and now I can't any message in the Mail application. How to upgrade to the Mail application with the new password? I looked at the previous questions, and they were told to go to the preferences, accounts, then enter it in the password section. However, I can't find any password section.

    It would help enormously if you posted the OS you are using. 9.2.1 IOS has nothing to do with your MacBook Pro.

    In Mail, try to go to the window menu and choose connection doctor.

  • iOS 8.4.1. A newer version of the iPad (9.2) is available, but he says that this version of iTunes (12.2.2) is the current version. How to upgrade my iOS iPad 9.2?

    iOS 8.4.1. A newer version of the iPad (9.2) is available, but he says that this version of iTunes (12.2.2) is the current version. How to upgrade my iOS iPad 9.2?

    iOS and iTunes are two completely different things. It could be that your computer is not capable of running the version of iTunes need iOS en 9. Have you tried simply OTA update?

    https://www.Apple.com/support/ios9/

  • What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?

    Original title: upgrade of Microsoft XP on an emachines T3830 Dell

    What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?  You said to go to Vista or Windows 7, I don't know which one to choose.

    What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?  You said to go to Vista or Windows 7, I don't know which one to choose.

    Hello

    eMachines is owned by Acer, Dell No.

    Here is the information IF you ever want to upgrade a computer to a later version.

    But I can advise you that your eMachine is capable of running Windows 2000 and Windows XP.

    http://www.eMachines.com/EC/en/us/content/drivers.html

    Put your model number in the link above > then search under operating system, provided drivers

    @@@@@@@@@@@@@@@@@@@@@@

    Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

    There is no update free from XP to Vista, 7, 8.1, or 10.

    Forget Vista as support extended for Vista SP2 will end April 2017.

    Follow these steps before you buy Windows 7; Windows 7 SP1 to support extended to January 14, 2020.

    Microsoft sells more than 7; Try Amazon.com.

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    "Windows 7 Compatibility Center" for software and hardware:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    «Installation and reinstallation of Windows 7»

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

    @@@@@@@@@@@@@@@@@@@@@@@@

    Follow these steps before buying and upgrading (new installation) of Windows 8.1; extended support ends on January 10, 2023.

    Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

    If this is not available, Windows 8.1 not install and work properly for you.

    There is a lot of information in this first link from Microsoft:

    Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

    "Update to Windows 8.1: FAQ".

    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

    "8.1 for Windows system requirements.

    http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

    @@@@@@@@@@@@@@@@@@@@@@@

    How to buy Windows 10; extended support ends 14 October 2025:

    http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

    But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

    https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

    " System requirements Windows 10"

    https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

    Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

    "FAQ Windows 10.

    http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

    See you soon.

  • "The computer must be restarted before upgrade can continue." You want to restart now? »

    This message appears every time that I reboot.  I do not know which update is, but he showed now whenever I started the computer last month.  How can I stop this message from appearing? I use Windows XP.
    See you soon

    Hello

    Every time that you start your computer, you see the following message is displayed:
    The computer must be restarted before upgrade can continue. You want to restart now?
    Your choice is Yes or no. If you click Yes, the computer is forced into a restart, but returns the message. If you click on no, you can work normally.

    QUESTION: You have an Adobe Reader 8 update failure. This update places an entry into a registry RUN key for the application "AdobeUpdater.exe. "AdobeUpdater.exe" application can be found here: C:\Program Files\Fichiers Files\Adobe\Updater5

    If you open these folders and double-click the 'AdobeUpdater.exe' application, you should see the same message as above.

    To check if you need to do workaround, do this first. Open Adobe Reader 8. From the Help menu select find updates. If the program checks the updates and concludes that they are, apply. This can solve the problem. But if you see the same error message after a restart,

    What solution would you suggest for those who also have Acrobat Pro installed? Uninstalling and reinstalling

    Registry key is here:

    Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run.

    Please, right click on run and export to your desktop and save it as back.reg.
    Delete and restart. If the problem has disappeared, open Acrobat, and try to run the update - help-> update

    YOU PACK THE FACE WITH THE STEPS ABOVE, THE QUESTIONS PLEASE FOLLOW:

    Error 'Need to restart the computer', after you run the Adobe Update Manager

    Question

    After you run the Adobe Update Manager, you receive the error message "Need to restart the computer." You receive the error message during all subsequent restarts of the computer.

    Solutions

    Do one or more of the following solutions:

    Solution 1: Delete the file of transaction of AUM.

    Delete the file AUtrans.xml the Documents and Settings\ [username] \Application Data\Adobe\Updater folder.

    Solution 2: Remove the Adobe Updater.exe registry key if it exists.

    Warning: The registry contains information on the system that are critical to your computer and applications. Before editing the registry, be sure to make a backup of it. Adobe provides no support for any problems that result from incorrectly modifying the registry. Adobe strongly recommends that you have experience editing system files before you modify the registry. For more information on the Windows Registry Editor, see your Windows user's guide or contact Microsoft Technical Support.

    To remove the Updater.exe Adobe key:

    1. go to hkey_current_user\\software\\microsoft\\windows\\currentversion\\run.

    2 Select the AdobeUpdater.exe key (if it exists) and then choose the editing command > delete.

    3. click on Yes in the dialog box confirm deleting key.

    Solution 3: Find and remove the AdobeUpdater.rbt file if there is.

    1. choose Start > search.

    2. under what Do you want to Search For, select all files and folders.

    3. in the all or part of the file name box, type: AdobeUpdater.rbt

    4. in the box look in, select your local hard disk.

    5. click on search.

    6 remove the AdobeUpdater.rbt file search results if it is found.

  • "Setup cannot locate the Windows installation you want to upgrade. Contact your system administrator. "in the blue screen.

    When I was trying to upgrade from Windows 2000 Professional to Windows XP Professional, after the first reboot, the system is returned with the following message: "Setup cannot locate the Windows installation, you want to upgrade.  Contact your system administrator. "in the blue screen. The only option is to F3 to exit. And the system may not start in Windows 2000 Professional more.

    Hello

    I suggest you follow the steps in troubleshooting section below and check if it helps:

    Error message "Setup cannot locate the Windows installation you want to upgrade.

    http://support.Microsoft.com/kb/242066

    Hope this helps

  • during the installation of windows 8, which upgraded the wizard asks to install now or install by creating media what the difference

    during the installation of windows 8, which upgraded the wizard asks to install now or install by creating media what the difference

    When you install by creating media, allows to create a backup of a Virgin DVD USB or USB key installation files. (I recommend you do this in case you need to reinstall Windows 8 in the future).

    If you choose to not, Windows 8 will be a non-media from your hard drive installation automatically.

    Windows 8 simplifies the procurement process with an installer called Windows 8 Upgrade Assistant Web that makes it easy to download and create a local backup for future use. Digital distribution works this way, you download the installer, launch that and he will download Windows 8, the time it takes depends on the speed of your Internet connection ultimately. Microsoft noted that the Web Installer includes a sophisticated compression technology that downloads pieces in sections of 10 MB to ensure that its safe delivery. When you download the installer, the installer creates a folder called "WindowsESD" in the root of your drive C:\ (if you have multiple partitions that this case may be on another). From there, you will find a complete Windows disk image, you can burn it to a blank DVD and make your own physics, copy, or store it on a USB key.

  • I want to know if I need to install Vista on it for the purchase of a Windows 7 upgrade edition?

    Editions of Windows upgrade

    Hey guys, I have a Windows Vista free disk and I'm building a new pc. I plan Windows 7 Pro, but I want to know if I need to install Vista on it for the purchase of a Windows 7 upgrade edition, or can I use the product key that came with Vista, when you install the updated version?

    In order to use the versions of Windows 7 upgrade, you must have a previous qualification license installed (Vista or XP), Windows 7 upgrade must be a compliance check. There is no need to activate it if.

  • This application is not compatible with the operating system installed. Please upgrade to Windows 98SE, Windows 2000 or more.

    Hi all

    I recently installed a mod for S.T.A.L.K.E.R SoC V1.004. The game won't start not even, instead, it gives me the following message:

    This application is not compatible with the operating system installed.
    Please upgrade to Windows 98SE, Windows 2000 or more.

    I'm under Win 8 64 bit. I have uninstalled and rebooted twice (both game and mod) does not.

    I have to downgrade to XP to be able to play this awesome mod, he ran on this platform with the same configuration before, why he now rejects it know not only the people at Ms.

    Please help if possible

    Thank you very much

    Pierre Viljoen

    Probably, all in all probably is a 16-bit program, and as such does not work on Windows 8.0/8.1 64 bit. In addition, the game seems to have 20 years or more. You can try running in compatibility mode, but I think that the game is dead. Hope this helps and if you need help please post and we will be happy to help you.

    The above opinion is mine and casually and does not necessarily reflect that of Microsoft, they are employees. or any other Member of this forum.

    "When we try to take anything by itself, we find it hitched to everything else in the universe"-John Muir

  • the Lightroom 6 to 6.4 upgrade?

    the Lightroom 6 to 6.4 upgrade?

    Hello

    Always the version numbers to be released like 4 or 5 or 6. It cannot be referred to as 6.1 or 6.2, because from time to time new updates that will be released.

    Yes, a manual will be useful as the update and all, in any case you can join Adobe here or you can contact the Support from Adobe.

    No society press products and updates. only basic product out to the market, the user can update once the application is installed.

    6.4 is not upgraded, its an update.  the last available update is 6.5 Lightroom.

    From time to time updates will be available for version 6, based on future needs to coordinate with changes in Windows or Mac OS, or to add additional features...

    You can check once link below:

    Install Photoshop Lightroom

  • I have recently updated my laptop to Windows 10 and can now access Lightroom, I had the same problem before, when I upgraded and you were able to walk through the changes, can advise you?

    I have recently updated my laptop to Windows 10 and can now access Lightroom, I had the same problem before, when I upgraded and you were able to walk through the changes, can advise you?

    It seems that there is a problem with the graphics card.

    Please try the step under the troubleshooting topic: Adobe Lightroom GPU troubleshooting and FAQ

  • Hi my former region for the creative cloud was in Pakistan. Now living in Belgium, how to change the region? I can't upgrade my plan creative cloud?

    Hi my former region for the creative cloud was in Pakistan. Now living in Belgium, how to change the region? I can't upgrade my plan creative cloud?

    Hi Olivier,.

    Please see this link for help:

    FAQ: How can I change the country associated with my Adobe ID?

Maybe you are looking for