HP ENVY laptop - 15-k112tx: sensor of fingerprint for my laptop.

Similar Questions

• sensor of fingerprint for hp compaq 6910p windows 7 requires downloading program. How can I do this?

  I have a laptop HP Compaq 6910p with windows 7. He asks me to download a program to get my fingerprint sensor work! How to do this please?

  Hello

  You must go to the HP support site.

  You can search your computer model and download the drivers here.

  Office support - HP laptops

  Concerning

• Software for the sensor of fingerprint for Win7

  I did a clean install of Windows 7 Home premium on my HP pavilion DV6606TX, which was already under Vista. The VeriSoft Access Manager by Bioscrypt fingerprint software that I've used before is apparently not compatible with Win7. Now I have fingerprint AuthenTec Inc. AES2501A driver installed, who says he works very good, but irrelevant software to actually run the sensor. Help, please.

  Hello
  Check this thread.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• HP ProBook 6440 b: no device sensor of fingerprint on my computer laptop probook6440b

  Hello! I just bought Hp - ProBook 6440 b. And there is no device sensor of fingerprint on my laptop. Is this normal?

  Hello

  Quite normal, not all Probook 6640 b are the same:

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04140345.PDF

  You can go to the store and exchange for a another 6449 Probook b which has finger print sensor.

  Kind regards.

• How to reset the sensor of fingerprint on Portege R700-174?

  Hello!

  my "problem":

  on my portege (r700-174), I run a win7 (which was preinstalled on your laptop), a victory for 8.1. and for some is true the technical preview of win10

  all systems are protected by password and fingerprints.

  also the win10-test system (for test prints digital-utility in win10)

  now, I deleted an old generation of win10 and do a new install with the latest version

  Unfortunately I forgort to cancel the registration of the fingerprint I had entered with this old win10 - so now this finger cannot be used
  to be entered for the new win10 (or any other system)

  My question

  is it possible to reset it completely (clear all the fingerprints for all systems) the fingerprintscanner out of one of my systems running or to cancel the registration of the
  Fingerprints for this system, which does not exist anymore on my portege?

  Thanks for the tips

  Kurt

  The fingerprints are stored on the fingerprint sensor and you will need to follow the instructions of this Toshiba document to remove your scans of fingerprints.
  http://www.MyToshiba.com.au/support/items/FAQ/386

  In the case that this procedure does not work, only the Toshiba certified maintainer would be able to erase fingerprints users digital related privacy information on the fingerprint sensor fingerprint flash.

  See also another thread:
  https://Forum.Toshiba.EU/showthread.php?75917

• Sensor of fingerprint and Portege R200 prints. How does it work?

  Hello forum,.

  I bought a Portege R200 in 2006. Works fine for me, but I could never try the sensor of fingerprint fingerprints-because I couldn't start at the same time and I didn't have enough time to find the problem ;(

  Could someone tell me here, what I have to do, to use it?

  I tried on:

  1. I click the omnipass key symbol in the systray and select 'add a new user '.
  2. I completed the form folling "windows account information.
  3. I selected "authentic prints digital driver."

  -> Error: selected item cannot be found

  I have no idea. What is the problem and how can I solve this problem?

  Best regards
  Martin

  Hello

  I have laptop with fingerprint sensor, but I checked the document of the user s manual for Portege R200. Please see page 62-64. There are good explanation how to use it.

• HP ENVY laptop - 13-d022tu: laptop lags when it is plugged

  Laptop works fine when on battery, but when I plug it, the laptop of begins to lag, and my games have a constant 20-24 FPS. I have also noticed that when the laptop is connected to 80% or higher it don't hang out, however, when I plug it to 20% or more, the laptop everything is lagging.

  Hi there @malktee,

  Welcome to the Forums of HP Support!  I understand that your laptop rowed when connected to the charger, and that you have noticed that this never happens when the load level exceeds 80%.   I'm happy to help you with this.

  From your description, this fix seems custom-made for you: HP ENVY laptop - the computer is slow or does not respond while that connected to the charger. As you can see that he mentions about the same problem but the break is 60% or less.  Try it and tell me if that solves the problem.

  If it doesn't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP ENVY laptop - 15 - ae101no: control of the Volume on the keyboard keys do not work!

  Hello

  Volume control keys had suddenly stopped working, and I have no idea why. I have the model HP ENVY laptop - 15-ae101no (ENERGY STAR). Could you please help me fix it? Thank you!

  Hello

  Try the following.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74867.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72105.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter and then hold button power supply for 30 seconds, then release.

  Plug the power adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• HP Envy 15 t (G0T59AV): HP Envy laptop speaker poor sound quality (particularly acute) as the volume increases.

  I had been without my HP Envy laptop a few weeks after he bricked on me and I had to send in for repair, and when I came back the sound quality seems to be noticeably worse than what I remember. The sound in general seems a little intestine initially, and it does not handle certain tones fine treble, producing shrill notes that almost seem like they're clipping or something, as if it's too much for the speaker to manage. The volume level refers to it - it's much worse at higher volumes, but its volumes, it should be able to manage, and has dealt in the past. 30 is basically normal, I'll hear parts of it start happening about 40 volume or so, 60 sounds evil, and 80 is almost inaudible.

  My first suspect is the dustbin of Beats Audio with what they sent this thing.  He gave me problems before. I fiddled with the Beats Audio settings for a bit and couldn't find a lot of luck. The strange thing is, I searched Beats Audio driver updates, and I came to the top completely empty. All links to them were either broken, be directed to the page of HP support containing the drivers for the specific device model questioned. The driver for my laptop page shows nothing about the drivers of beats. And my device manager doesn't seem to show that no driver present Beats, either, even though I SWEAR there drivers for them in the past. The only present audio device is the Realtek HD Audio driver. The Beats Audio utility in the taskbar does not seem to think there is something wrong, however, so I don't know what's the case. Can someone help me?

  (I know of no reason that the question I sent my laptop in for repair would be linked to this, nor do I have any reason to believe that the person who repaired the laptop could have done anything, as all my files on my HDD seem to have been completely intact, but just for the sake of rigour : A couple of weeks, apparently caused by me accidentally stick a 3.5 mm headphone jack into the adjacent USB and damaged brick my laptop. The computer, stop immediately, if she was able to start right back up. The next morning, it was completely insensitive and would not start until it was. I knew with certainty that it is the USB at the time, I thought that it was unlikely that a damaged USB port might cause a full brick computer, but when I got back from repair, the repair summary said that the only thing to do for she was replacing a USB port.  Other than the good question, my computer was working perfectly since.)

  Hello
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY 15 t-k100 Notebook and problems with sound not working not properly. You can try-

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on the speakers.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window. Reboot the laptop and test the sound.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a link to a Microsoft fix for Windows 10, that might help.
  
  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below! .
  
  Thank you.

• HP Envy laptop - 15-ae011na: HP Envy - keyboard and Trackpad not working after the mode 'sleep'.

  HP Envy laptop - 15-ae011na

  I have this laptop for only 1 week, he did various updates. I guess that's from Windows 8 to 8.1. He also completed an update of the BIOS with HP Support Assistant.

  Question: When the awakening of my laptop mode 'sleep', my trackpad and keyboard do not work, I have unlock my PC using HP Simple pass, then press the power button to restart the machine.

  Troubleshooting: I followed some advice for troubleshooting on the support page which lead me to uninstall the keyboard driver then restart my machine. I have all the latest drivers aswell.

  Someone has an idea what might be causing the problem? Ideally, I'd like to do a restore or upgrade of Windows 10 immediately.

  Thank you.

  Looks like this has been caused some my driver problem with Windows 8.1 and I guess that's with HP SimplePass such that it would not recognize the keyboard and the trackpad after waking up to use it.

  I have upgraded to Windows 10 that looks like a solved the problem.

• HP ENVY notebook: Headphones not detected on HP ENVY laptop

  Headset/headphones not detected by the laptop when it is inserted into the audio jack.

  tried several headphones which none were detected despite working on other devices.

  USB headset is detected.

  Have updated audio drivers using HP support Assistant and manually and not always no chance.

  Had this problem because the laptop has arrived.

  Any help much appreciated and I will try to provide all other necessary details.

  Hey @ABONKERSCHICKEN,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with headphones not detected on HP Envy laptop. I'd be happy to help you with that.

  To begin, I would like to follow this document: computers HP - solve the headphones and headset problems

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• HP ENVY laptop - 15-k277ca: upgrade memory RAM - HP ENVY 15 Notebook

  Hi all!

  Last weekend, I upgraded the RAM in my laptop HP ENVY laptop - 15-k277ca.

  The machine has 1 module of 8 GB by factory, so I bought another module of 8 GB (same brand and same rate).

  But the problem is that the machine does not recognize this second module, neither in the BIOS nor so

  I am running Windows company 10 x 64.

  The weird part is that I downloaded the CPU-Z, and this software recognizes the two modules.

  Any idea?

  Here is the image of the CPU - Z software (where memories are recognized)

  

  

  See tensions? You've mixed low-voltage and voltage regular memory. They can be the same machine and the speed, but they are not the same tension. This will cause problems as you see. The computer is designed to work the DDR3L memory (1.35 volts). When you correspond to the modules, you really need to match modules. Can you confirm part numbers printed on both modules and the specifications on the labels?

• Want to (deleted) HP: Hi! my laptop is wifi HP envy laptop, battery, mode of touch problem

  Hello! Please please help me troubleshoot my Hp envy laptop. I have an imenusing hard since I bought it 4 months ago.
  
  1 wifi turns off and it takes time to turn on. Only the airplane mode will appear in the network connection.
  2. the battery will easily to consume even if only I always shut it properly.
  3. There is an instance of the function of touch pad didn't work (zoom in and zoom out)
  
  I hope for your immediate response to the above issues. Thank you.

  Hi tardis, regarding the upgrade. The problem is that I can't by the Recovery Manager window that says "inconplete restoration", I tried Jo turned it off the laptop, but it still run recovery and it will always end up with the same window. Meaning, I can't go through my main desktop to search and open for windows update. Is there another way? I'm stuck with this box of the Recovery Manager window.

• HP envy laptop 4

  Hello...

  my system is HP ENVY laptop PC (B8F41EA #ABV) 4

  System was with win7. But due recovery does not, I installed from USB. Last four days, I tried to install win7 64 bit Ultimate. It is at the time of instalation complest (after copying windows files, extension of windows files, features installation and update) indicating an error. " Windows Setup could not configure windows to run the hardware on this computer."

  so, how can I solve this problem... pls help me.

  Thanks in advance...

  Hello:

  I can't find the model number or the plug on your laptop by entering the product ID you have posted.

  If your laptop has an Intel processor and chipset, restart the installation and follow the steps below and see if it works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and should install W7.

• Sensor of fingerprint identification does not work and the touch screen unresponsive

  iPhone 5 s 32 GB Stopped working sensor of fingerprint identity with the touch screen not responding

  latest version of iOS

  Flickering of screen there are some horizontal lines appear on the screen for a while in very minor rainbow color

  went to the apple support no help in troubleshooting. They asked me to request a replacement pay for 22K INR.

  I think that it is not worth getting a replacement of the delivered phone to new/old version as new series is available in the market, paying a large amount.

  I would like to hear your valuable contributions.