HP Envy m6-1231ea network driver does nothing after extraction
Hello, during the installation of the drivers previously after they had been extracted usually something would happen but when I installed the network driver nothing was. I've done things like click on the driver I downloaded and watch it to extract again, rebooted my laptop, delete the drivier and reinstall, but I always get the same result. Is there something that can be done?
Hello:
If you do not see a network listed in the category other peripheral controller, this means that the wireless driver must be installed.
Tags: Notebooks
Similar Questions
-
Freecom network drive does not work in Windows 7
My network of Freecom 400 Gb, LAN + USB 2.0 drive, works fine in Windows XP.
After installation of the software (for XP) Windows 7 recognizes the drive (FND) in the network, but clicking on the drive reported an error.
When you try to 'Add and remove mapped actions' drivers software the network drive does not.Unfortunately, Freecom doesn't give not any medium.
On some forums, I found a 'solution' that did not work for me: Start - computer - Network\\FND\Public
If anyone using a Freecom network drive has found a solution, it could make me very happy to cummunicate this for me.
Johan Dulac
Hello
1. What is the exact model of the Freecom Network drive number?
2. What is the full and exact error message?
I suggest you to check if the drive is compatible Windows 7.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
I would also refer the link for Freecom support:
-
Mount Dev device as network drive does not
I mounted the unit alpha as a network drive in Windows since the first day and all of a sudden, it doesn't connect.
Someone knows how to get it is up again? I use the same method as the Playbook of editing.
Fixed. Stupid Windows. Just need to kick in the button.
-
First Elements 9 does nothing after loading; don't load new project - please help!
Hoping someone here can help...
From the outset, I must admit that I'm not the best to search the Internet to find answers to complex computer problems (or at least complicated for me). I did my best to try to find help or information to the problem I'm having, but ended up only more confused and frustrated.
I was able to run to first Elements 9 on my old PC (Windows 7 - home page) for a while with no problems. However, just last week I did splurge on a PC brand new (Windows 10) and can't get Premiere Elements to function properly at all.
My problem:
Premiere Elements will be charge. The program opens. He will ask me to name my new project, I do it, and then it does nothing. It does not load a project timeline/layout / anything. It is just an open window and empty. All menu options for what that this either in the upper part are all grayed out - apart from the creation of a new project, open a project and help options. Create a new project does nothing - as I have already said. I have no plans to open it, I find myself with options here. If I try to open one that I named in my attempts to get the program working, I get a notice of a serious error causing elements that need to close. I click 'ok' (as my only option) and get a second error message: Microsoft Visual C++ Runtime Library - Runtime Error! First Elements - this application has requested enforcement in an unusual way. For more information, contact support.
I installed both disks I have for Premiere Elements.
I have uninstalled, reinstalled, uninstalled, reinstalled...
I downloaded this file/additional patch for Elements 9.
I made the diagnosis and he said that I could run in Windows 7, but there is nothing (granted, once again, that there is another computer with Windows 10).
I have uploaded/updated QuickTime.
I've updated Windows, drivers, etc..
I created a second user profile on the computer as an admin (which I saw that someone had suggested something like this, to have worked for a problem that is unique) n ' did not help. Same problems.
I'm about to give it all up this program together and buy something else...
I'm not surprisingly be notified when it comes to computers, so I hope someone can explain a solution for me in an easy to understand way... If the problem is too complicated for me hard, once again, I can finish just call, she leaves and get something else. Really, I prefer not to have to do this, but...
I hope someone here can help me.
Thank you very much in advance if someone is able to offer information, suggestions, ideas, or help! I would very much because I am completely at a loss now...
Version 9 does not work on Windows 10.
You can watch when buying version 14.
-
HP envy j110tx: my flash drive does not detect in the hp j110tx start menu
When I m trying to install windows usb 8.1, my USB is not detecting in my laptop boot menu like j110tx.
But detects the USB even in my pc another and it contains the bootable file and it is lodable too
I've looked everywhere but I have nothing, so please help me
Hello:
You have created Windows 8 or 8.1 Installation USB Flash Drive with UEFI?
http://www.eightforums.com/tutorials/2328-UEFI-Unified-Extensible-Firmware-Interface-install-Windows-8-a.htmlhttp://www.eightforums.com/tutorials/15458-UEFI-bootable-USB-flash-drive-create-Windows.html
Concerning
Visruth
-
Dell XPS M1530 Windows reinstalled Vista, network driver does not
Hi, I had to replace the hard drive on my Dell XPS M1530 because of the complete failure of hard drive.
I installed Windows Vista and also installed all the drivers from Dell. All of them seem to work fine except the driver of Ethernet controller and wireless adapter one. I tried to download the drivers from Dell Web site, but who moved it - it comes up with this message: "the device could not be detected. Installation interrupted.
In other words, that I can't connect to the internet, so using computer for a friend right now. Is there a driver I can download to make it work?
Hi, thanks for all your suggestions. I tried to look at all the possibilities in terms of manually install the drivers, but nothing has worked.
So in the end I bought a USB key external wi - fi and with that, I managed to connect to the internet. Once connected, the laptop must have then auto-téléchargé the right driver for the internal modem, because a few days later, I managed to connect to the internet even without needing the key external wi - fi.
-
Leapmotion Envy 17: my bluetooth driver does not work
bluetooth cannot match, send or receive files
Hello @MohamedKhairy,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I understand that your notebook is not able to pair with Bluetooth devices, and I'd be happy to help you in this case!
To make sure that the Bluetooth radio on your computer is set up correctly, please follow the steps below:
Step 1. Go to Device Manager
Step 2. Right click on "Bluetooth device" you want
Step 3. Select "update driver software... »
Step 4. Choose "Browse my computer for driver software".
Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
Step 6. Select "Ports (COM and LPT).
Step 7. Select "Microsoft" to the list of "manufacturers".
Step 8. Finally select "Standard series via a Bluetooth connection.
If you are unable to connect to a Bluetooth device, try the following:
Step 1. Search for 'Change device' in the start menu in Windows 8.
Step 2. Click on where it says change device installation settings.
Step 3. Select No, let me choose what to do option.
Step 4. Check the automatically get the device app option
Step 5. Click on save changes to save the settings that you select
So, you can try this
Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
Step 2: Now find 'Bluetooth Support Service' and double click it
Step 3: Now click on the Log on tab and type "Local Service" without the quotes
Step 4. Click on "account".
Step 5: Now remove any authorization of passwords the password field blank
Step 6: Below the upper left title should be a hyperlink 'Start' click
You can also check:
If you're still having problems, you can also see this thread about how @IstvanKovacs resolved his problem with the Compatibility Bluetooth 4.0 with Windows 8.1.
I also encourage you to display the number of your product to your computer. Below is one is a HP Support document that will show you how to find the product number of your computer. In addition, it will also help if you specify which operating system you are using; and if your operating system is 32 or 64 bit. You can provide more information, the better!
How can I find my model number or product number?
Operating system Windows am I running?
Is the Version of Windows on my computer 32-bit or 64-bit?Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!
Concerning -
HP ENVY 15 laptop: hard drive does not
Hi, I have my pc has two drives hard but recently replaced my windows and now I have (C) drive and my HP support assistant always displays two.
Disk Management shows the two discs? You simply need to assign a drive letter and "mount" the second drive so that Windows can see and use it.
-
My cloud of creativ adobe doing nothing after the initialisating :/
Hi, I downloaded adobe (free version) for used photoshop creativ-cloud. I've used it before so my pc can use this software.
So I download VAC and I have lunch there. But it is a small loading and after loading I have nothing...
just like quitting smoking. I can't do nothing. My config is 64-bit, maybe that's the problem? I have not found the VAC for 64 bit :/ can someone help me please?
see if you can uninstall the application of office cc, https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html
clean, use of the Adobe Creative Cloud cleaning tool to solve installation problems
Restart your computer
Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud
-
Hard drives does not after created vm web client
I'm under esxi 5.5 with the web client vsphere. When creating a virtual machine through the customer web of hard drives are not appear. I go through the process and click Finish and everything will check fine no errors, but when I go to edit the virtual machine without hard drives are showing. Now, if I create the virtual machine via the vsphere client it all works. I tried in the client web creation v10 and below the virtual machine and still the same result.
Just solved the problem. I went ahead and reset services and it works now. The weird part is that the hard drives or specific devices have not been created and there where no errors at all. I guess that the constant permutation between vsphere and web client cause something in the background
-
FF does nothing, after hitting <; enter >; in the url box in the navigation bar
With a url in the url box in the navigation toolbar and the active cursor also in the area, pressing on < enter > do not enable the url and sends the browser to this site. Works in Chrome, IE 64 bit, etc. but not ff.
Hello
Please see this.
-
Satellite keys fn A500 does nothing after upgrade windows 7
Hello world
I use Satellite A500, which I just did the upgrade to windows 7 (32-bit) yesterday, however, I can use is no longer the FN key on the keyboard that I would use it very often.
can anyone help? much appreciated!
VMR
Hello!
Can I ask you if you have already performed a search in the forum for similar topics? I think this question is asked very often in the last days, so, normally, you should find an answer to your problem.
However, if I read in the forum you must install the latest Toshiba Value added Package. You can download it on the Toshiba page:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversCan you confirm that it s work?
-
Please can you help me - I turned my cell phone Envy in to an expensive paper weight, after (below) the upgrade of Windows 8.1 at 10 - I hated it and decided that I must return to 7Pro as I want to join the domain and want to install VMware etc.
I made the plunge and left me without back that all the important factors are missing, including USB, NETWORK interface integrated hubs & wireless - the machine has no DVD player and it won't recognize not flash or SD - ports USB card readers but work for dongle wireless keyboard and mouse.
Not too sure where to go now - any ideas?
Model 15-u000na
P/N J1W92EA #ABU
Hello:
There are other drivers you need...
Wireless:
This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.
FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70859.exe
You will need this bluetooth driver for this model of the wlan card.
FTP://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69230.exe
PCI device: 1 driver on the list from the link below.
Series 8 Intel xHCI HC - 31 9: download, unzip and run the setup.exe file.
PCI Simple Communications controller:
This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.
File name: sp71258.exe
ACPI\HPQ6007:
This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.
File name: sp71811.exe
ACPI\INT33A0:
This package provides the driver for Intel Smart Connect technology for the laptop models running a supported operating system. The driver for Intel Smart Connect technology allows the system to exit the sleep mode and web update supported applications such as electronic mail. The system enters sleep once the update is complete.
File name: sp68943.exe
ACPI\ACPI000E: The device missing the driver's ACPI wake up alarm.
After several attempts to scouring the internet, I found the file that I attached below.
This is the ID of the material shown in the file of configuration information...
[Manufacturer]
STD % = AcpiTime, NTamd64[AcpiTime.NTamd64]
% * ACPI000E. DeviceDesc % = AcpiTime_Inst, * ACPI000EDownload and uncompress the file in its folder. Do nothing with the 2 files in the folder.
They must be installed manually as follows...
Go to Device Manager and click on the (unknown) device of ACPI\ACPI000E who need the pilot.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.
Make sure that the include subfolders is selected, and I hope that the driver will be installed.
Then restart.
-
HP envy 15 notebook PC: driver HP Envy 15 Wireless Network adapt
I want driver for HP ENVY 15 wireless network adapter
REF: L0C92EA #ABV
Operating system: windows 7 Enterprise 64-bit
Hello:
You need these drivers wireless and bluetooth for this card...
Driver LAN wireless Broadcom
File name: sp69014.exe
Software and driver Broadcom Bluetooth 4.0
File name: sp66402.exe
-
Media Player does not detect libray on network drive
I put Media Player "Ripper" on a network (NAS Netgear) drive and does happily, but when I want to play music from the library it doesn't. The Media Center also does not see the drive either.
Hello
Temporarily disable the security software and check if media player can play files in the network drive.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Be sure to activate security software so that the computer is protected.
Take a look on
Diana
Microsoft Answers Support Engineer
Maybe you are looking for
-
Next page causes contextual developer tools: how to stop?
FF 41.0.2, the Inspector of Developer Tools window appears whenever I hit Page Down. How can I stop it? I have already enabled devtools.inspector.enabled false, but this has no effect.
-
Audio disabled, not able to listen to any audio Web site, I've updated add-ons and I'm using the latest beta version of Firefox.
-
You cannot change the settings of my Toshiba Power Management
Cannot change settings in my power toshiba management section... can someone help me?
-
Cross-platform - Windows to Linux development
I'm not clear on the meaning of some of the statements in the document to: http://www.NI.com/white-paper/11786/en We have a business VLA for LabVIEW Professional Development System (SP1 2010 and 2011), running under Windows, Win 7 (64-bit). (1) is "N
-
Vista wants to be restalled after SP2 has tried and has no automatic installation
I'm currently running Vista and I was getting the auto update SP2, when the installation failed and my machine came with a window indicating that it was returning about to restore. Then it didn't and now being asked to reinstall Vista. Is there a fix