HP ENVY m6-w103dx: Windows 10 Bios Update HP

Similar Questions

• ENVY 13-D046TU: F.35Ap1 BIOS update kills port HDMI on ENVY laptop

  After installation of the firmware update marked Softpaq number: SP75152, F.35Ap1 Version now four of our laptops (13 "and 14" ENVY ENVY) have a HDMI port not working. The external screens are 'no signal '.

  We spent a lot of time with the help of HP (via Hong Kong, we found ourselves in India). Remote control sessions. All a waste of time. The update of the BIOS is faulty, no system restore cannot solve this problem.

  Same day (June 13, 2016) one of our laptops automatically installed this update of the BIOS with the HP Support Assistant and killed the HDMI port.

  A. is there a way to acquire and install the previous BIOS?

  When can b. we expect a new update of the BIOS?

  C. how the hell did this update of the BIOS pass test? -> 4 / 4 updated computers laptops have a broken HDMI port. We have 7 other laptop on the left who are fortunately not updated.

  Hi there @BugFinderand @DebVancouver.

  Welcome to the Forums of HP Support!  It's a good place to find the help you need, other users, HP experts and other support staff. From what I understand, bothl of you experience the same problem with HDMI after a BIOS update.  I'm happy to help you with this.

  I would, if possible, that each of you try the laptops HP - restore the BIOS to a restoration to the having previously worked BIOS.  The main purpose is to return you to a working state. If this method works for you, obviously do not install BIOS update again.

  Edit: Bugfinder reported that restoration, the method of BIOS didn't work for him, but he had to do several times (4 times in at least one case). I guess you could say that it is true to its name, and I thank very you much for the comments.

  Please let me know if it works for you and if not let me know if there is an error message any. If this does not solve your immediate problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP ENVY 700-305no desktop PC: Bios update failure.

  Long story short (a little).

  I got a virus, is a virus really means, crypt all my files, prevents the opening of antivirus programs and redirects the downloads.

  virus survives 3 reset factory, 3 hard drive formats, and a reinstall of Windows.

  This leads me to believe that he himself got into the Bios of my computer.

  so I downloaded the latest bios for my system, in this case

  Update the BIOS HP consumer desktop PC (SSID family ROM 2AF3)

  through the Setup program on another computer, I installed the update to the bios of my USB,

  inserted in my main pc, held down the Windows and key B, while starting my computer.

  This led beeps and my computer Wrooms, 10 minutes later, nothing happened.

  I decided to start the installer directly from inside infected computer, but this resulted in a failure too.

  say that the downloaded bios is not compatible.

  What I'm asking is how I should go about the removal of the old bios (possibly) infected and reinstall it again.

  I'm not aware of a way to Flash the BIOS in Ubuntu, but it might be possible if there is a wine app in the version you have.  I have not experienced or read where someone else tried it either.  You could ask for more in the Ubuntu forums.  Don't know if it is possible to WIN PE 3.0 either.

• Windows 8 - BIOS update for older computers?

  I use a Dell Dimension 4600 to test consumer Preview of Windows 8 (Yes, I know, it's a dinosaur).  Consumer overview works very well. However, the Preview version will not install. I suspect that it is because the BIOS is too old. (The currently installed version is S12).  Is there all the steps to upgrade the BIOS and expose the NX / XD bit in the BIOS security settings?

  Or, is there a work around to allow installation of Windows 8 Preview version on this level of the machine?

  Thank you

  There is no updated BIOS more for the 4600.  Updates usually does not continue beyond the end of sales for a given model, once most of the stability issues have surfaced and resolved.

  What kind of error get you when trying to install it?

• Satellite A300 - 1 GM - after Windows and BIOS updated LEDs don' t work

  Hello!

  After Vista SP2 update and update BIOS (Media Player and LED power) LED buttons do not work.
  Why?

  How can I fix these buttons?

  Hello

  Satellite A300 - 1 GM belongs to the series of PSAG4E so you chose the update of the BIOS for this series of model?
  Also in the BIOS, you can enable and disable the lighting. Check this box!

  Lighting will also be controlled due to the added value package. You need to reinstall it and the Toshiba site, you can find a newer version:
  http://EU.computers.Toshiba-Europe.com

  Good bye

• Envy 17 t-j000 Quad BIOS Update F.53 kills Intel WiFi Connection

  Yes - Fine-
  I had that problem licked in September (see my previous posts) - but this is my daughter - and after being hounded mercilessly by the HP "assistant" she inadvisedly updated its BIOS for F53.

  Thank YOU HP - you killed its WiFi connectivity - once AGAIN.

  I need to roll its BIOS to whatever it may BE in September 2013 - but the older BIOS is available online F43 January 2014 - I've seen as causing the death of WiFi complaints.

  Yes - we have the usual question Intel WiFi card - it IS now NOT EVEN SHOW UP in the Device Manager.

  I reapplied the Softpak mentioned in my previous note - No help.

  I went through the usual steps to re - identify a lost WiFi card:

  Unplug the computer, remove the battery, remove the WiFi card, disconnect the backup battery

  Wait 5 minutes

  Plug the computer and demarrer start upward, then closes down.

  Reinstall all components above and start back up

  NO JOY - no WiFi in Device Manager.

  So - Pleasie Pie let me know where I can find a copy of the BIOS that was available in September 2013 so that I can re - install that and hopefully recover its normal computer?

  I need the worm F.1c Insyde BIOS

  As usual - HP is not a clue.
  Although laptops I bought in the past seem to be great values - ALL have had fatal flaws
  Questions, MOST issues of BIOS and WiFi.
  Except the DV6000 - in which defective cooling system caused the video chip that is so hot, it melted ON the motherboard.

  The heat ALSO melted an internal cable - Fortunately, independent repair center was able to re-ball of the chip and replace the cable at a cost of $120.  I've been 2 months too late to get in on the action.

  Also, your BIOS WiFi Whitelist became a killer of the real deal.
  Fortunately - I got a copy of SP62444 - and used that to restore my system

  After THAT--I had to reinstall the INTEL driver for the wireless card.  The driver of HP down to work.

  -

  Computer laptop NEXT will be ASUS, ACER, Fujitsu

  I don't like NOT Sony, and as you can imagine, HP is now off my radar screen as well.

• Equium A110 - 276 BIOS update for Windows 7 32 bit

  "Hello everyone, I'd like to update the BIOS on my satellite A110-276 and the two choices are 'OS Independent' and ' Windows Vista 32 bit. I have Windows 7 32 bit on this laptop. If I choose "OS Independent" it tells me ' Bios is NOT compatible for portable computers with Windows Vista! "and if I choose" Windows Vista 32 bit ' he reads "Bios is only compatible for portable computers with Windows Vista!

  Exclamation points are Toshiba, not me ;)

  So I am stuffed and I need to stay with my current BIOS, or can, I use Windows Vista BIOS update?

  Thanks to anyone who can help!

  Hello

  First question; Why do you update the BIOS?
  Do you want to update only to have a newer version?
  If your Windows 7 is working well, then a BIOS update is not necessary.

  Otherwise, install Vista OS to Toshiba Recovery (if available) disk, the BIOS update and then change to Win 7 ;)

• Envy 17 3010eg: upgrade to Windows 8 and update Bios: no switchable graphics and other problems

  Hello

  I'm of the Germany, but I'll do my best to write this in English.

  The product name and number: HP Envy 17 3010eg {information}

  Operating system: Windows 8 Pro 64-bit

  Drivers: everything up to date

   

  Long story short,

  I just wanted to upgrade the pre-installed Windows 7 Home Premium 64 - bit to the new Windows 8 Pro 64-bit.

  So I waited until the driver for Windows 8 support has been completed by HP.

  This month, I noticed that HP has released a graphic driver for Windows 8.

  Happy as I was I installed Windows 8 immediately via upgrade function.

  I installed all the missing drivers.

  * Update Bios to F.08*

  I noticed that I had to upgrade my Bios to version F.08 to install new graphics drivers. I did the upgrade and installation of the driver.

  BUT after the update to the version of the Bios the laptop only F.08 recognized the AMD graphics card. The integrated Intel HD 3000 graphics card had disappeared!

  Even after installing the new graphics driver, the Intel card is still missing in the 'Device Manager' of Windows 8.

  The battery life is now about 1 1/2 to 2 hours maximum because the laptop always uses the card AMD.

  So I looked in the 'new' Bios, but I have not found a way to change the graphics card. So I think that there is only a 'software' switch to do so.

  I have installed "AIDA64"and look under "Graphics".» The graphics card Intel HD 3000 has been mentioned as 'disabled'.

  Nice, but I have no idea how to turn it on again.

  So I re-installed Windows 8. This time, I did a completely clean install. With the same results.

  So, I switched to Windows 7, and there you go. Two graphics cards are displayed in "Device Manager" and the switchable graphics feature works perfectly (! even with the new version of the Bios F.08!).

  * Tested in Bios Version F.09*

  Yesterday, I noticed another Bios Update. This time in version F.09.

  So, I updated the Bios with Windows 7 installed.

  Everything went well (I thought!).

  Once, I've done a completely new installation of Windows 8 to take a peek, if Intel HD 3000 card will be recognized this time.

  BUT without success...

  So, I thought that the problem could only be Windows 8, because Windows 7 works perfectly.

  * Problems with Bios Version F.09*

  BUT then, I noticed a strange behaviour of my laptop:

  -proximity sensor no longer works

  -the keyboard backlight cannot be (DIS-) activated

  -the brightness of the backlight is half as usual

  -internal fans are going crazy-> they accelerate without reason (laptop is idle) and won't slow down until I do a re-boot

  * Version of the Bios downgraded to F.05*

  So, I spent to the version of the Bios to the older Version available: F05

  And I was a little shocked by the result.

  Windows 8 acknowledged the Intel HD 3000 graphics card again!

  The problem is the Bios!

  Then, I upgraded the version of Bios version to see which version of the cause of the problem:

  Œuvres F05

  Œuvres F.06

  F.08 does not work

  F.09 does not work

   

  So I decided to stay with the version F.06

  BUT to install the new Windows graphic 8 driver you need the version of Bios F.08 (min.).

  I installed the driver anyway...

  I found myself with a black screen... I had to reinstall Windows completely.

  Yet more long story short,

  I ended up using Windows 8 Pro 64 - bit with the graphics card AMD only.

  I also updated the Bios (back) to the version F.08 dispelled the problems with the version of the Bios F.09 I mentioned.

  So for the moment I am absolutely no idea what the problem might be.

  The support has not yet heard of these problems and I have not found any website which explains the same problem.

  Every posting, I found explains that the AMD card is not recognized by Windows 8 but Intel HD card.

  Someone else got the same problems?

  What do you think? Is it really a problem with the Bios?

  What can I do to solve the problem?

  for me the best driver are:

  http://leshcatlabs.NET/

  Works Perfekt (cards during execution of the F06 BIOS and a map when F08/09) and are updated often.

• HP ENVY 700-049 will be not updated to Windows 8.1 - 0xC1900101 - 0 x 20018

  I recently bought a HP Envy, office 700-049 and have updated to the most recent Windows 8.  I re-downloaded and installed all the drivers for Windows 8 listed on the support page.  I disabled the LAN wireless in Windows (no way to do it in the BIOS I can say).  After that, I went to the App Store Windows and ran the 8.1 update.  The machine restarts and begins to set up the devices, but stops before the end with the SYSTEM_THREAD EXCEPTION NOT_HANDLED error.

  On reboot I give myself

  0xC1900101 - 0 x 30018

  It appears in Google... and I tried common recommendations (install updates, install the latest driver, disable WLAN)... y at - it additional suggestions or I'll just have to hang tight on MS to fix this?

  My wrist is tired of bouncing over the shortcut bar. :-)

  Kind regards

  -Tony

  Obviously, make sure you have the latest drivers and updates installed... but I managed to get through there.

  I'm pretty sure that the Ralink Wireless card is the culprit.

  In addition to the steps I have described here above I have disabled the integrated graphics card.  Also, I was going through a KVM.  I hooked the mouse, keyboard and monitor directly in... using the graphic adapter PCIx.   But I suspect that the following was "the miracle."

  I had a set of screwdrivers on a small scale and a pair of pliers and took the Ralink wireless out.  It's just "above" where is the PCIx graphic card.  This screw was really in there... Please be very careful not not to strip out.  Once the screw is out, it appears out of the slot.  I just hid it near bays of drive.

  With the offline wireless the 8.1 update succeeded.

  -Tony

• HP ENVY 15: Problem with audio after the Windows 8.1 update

  Hi, I'm on HP ENVY 15 notebook PC and I updated my windows 8 to 8.1. Until a few days back, everything was fine. However, now, I have no audio through speakers or head phones. Can someone help me please to solve this. Thank you.

  Product number: E4N80EA #ABZ

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  Once the reinstallation is complete, shut down the laptop by pressing the SHIFT key when you click Shutdown to temporarily prevent a hybrid boot.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Envy Touchsmart Windows 8.1 update 15-j05cl - black screen

  Have a HP Touchsmart, envy 15-j057cl. I can't upgrade to Windows 8.1. I did the following:

  1 installed all windows updates.

  2 went to HP support for machine page and installed all the drivers.

  3. don't run Windows - no problem identified compatibility Manager.

  4 deleted Norton preinstaled. No antivirus software is enabled.

  5. attempt to update the Windows store.

  6. black screen.

  Back in Windows 8. Windows has reported various attempts through error messages, including:

  0xc1900101 - 0x3000D

  Then-

  1. drivers for bluetooth and Ralink wifi disabled

  2 attempt 8.1 windows update of windows store

  3 black Screen

  Back in windows 8

  I tried very hard to make sure I've gotten all the latest drivers and BIOS, including the chipset drivers. I have not installed any other software. I also disabled any driver that I can not have everything while the update fails.

  I need to get back to work. Any thoughts?

  Thank you...

  The saga continued, but it had a happy ending.

  On the advice of the HP support, I uninstalled the driver Intel HD, booted safe mode and then tried the Windows 8.1 update. This time the update completed, but he returned to the black screen when I tried to install version 8.1 of Intel HD display driver. At this time, of course, it wasn't able to go back to Windows 8.0, so I had to completely reinstall the operating system from scratch. Good thing, I had all my saved data.

  After this experience, I gave up for a while, but he contacted the HP support to express my displeasure.  I went to a case manager, who contacted me the HP SmartFriend support.

  Today, we did an update of the BIOS. This new version of the BIOS F.53, just released on March 10, 2014 (after I had made my last attempt to make the update). After updating the BIOS, I have successfully completed update 8.1 Win. I then checked to make sure I had the latest version of the Intel HD Display Adapter driver and I did. Actually, the pilot that is displayed on the page for the driver for my machine was older than the version I have installed. So far so good.

  It seems that the solution to the problem was for HP to do a BIOS update.

• HP Envy 15 Touchsmart does not start after the bios update

  I had one laptop touchsmart from HP Envy 15 (initially Windows 8, windows 8.1 now) for about 2 months now and have not had any problems, until a few hours ago I tried to update the bios of my laptop with the hp support assistant. After the reboot, the pc is more would start up and took me to a blue screen with the error SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Everything that I've done short far from a refreshment or a reset has not worked and if I could I would avoid both that I don't have the bandwidth to download windows 8.1 again.

  HI Calsius:

  Thank you for your query.  I will be happy to help in any way I can!

  After the Windows 8.1 update, did you create a restore point?  If so, you can use to restore from that date and not lose your 8.1 updated.  Some BIOS have an option for a restoration which should not affect your operating system.  I did a search of Microsoft and found this answer click here.   Here is a document on the ' update the BIOS'   click here.»  You did not provide your model number and the HP Envy 15, is a series, so I couldn't get a specific documentation for your computer.  Here is a document on ' computer will start (Windows 8) " click here. If you are able to get your computer running and upward I update all the driversand then create a restore point to return if necessary.  If the Bios update should fail a 2nd time, your restore point will take back you to just before you retried the update. If you were to use the recovery option you need go back to Windows 8, or back to the factory.

  Please let me know if this helped.

• BIOS update laptop dv4 envy

  HP Envy dv4 Notebook PC windows 8 IE10.

  About 8 or 9 months ago there was a BIOS update. It has been downloaded, but you have not installed (installation failed). a few days ago there is another update for the Bios, but since my first update was unsuccessful I should try again or let alone since every thing works fine other wise.

  Do not use the laptop (W8) a lot because I prefer my PC W7.

  Thank you

  WAY

  Hello

  Unless the bios update fixes a problem you're having with Notepad or offer additional functions, you need, my personal opinion would be not not to date.

  If everything works Ok, I'd recommend just leave as is.

  Best regards

  DP - K

• HP ENVY 700-030qe: BIOS updates for my HP desktop computer

  I have a desktop HP ENVY 700-030qe with Windows 8. While looking through the updates of software available for my system, I have seen two listed in the BIOS:

  (1) HP Compaq consumer Desktop PC BIOS for ROM family SSID 2AF3 dated October 2014.

  (2) HP Desktop BIOS update system for PC HP ENVY 700/800/810 with 2AF3 family ROM dated May 2014.

  1. How will I know what family of ROM BIOS I have? I have pictures of all the screens of BIOS that I could get and nothing mentioned family BIOS ROM. I still have the BIOS original version KAI 80.07.

  2. the two updates apply to my computer? The wording is confusing. It seems that only the second apply to my system unless one applies to a more general category of the office. If both apply, as the first is the most recent, which would be the one to use?

  3. There is an issued for the BIOS in June security update that I ran across here. Which does not appear in the update list. Why would that not replace the other? Can I assume that the October update would include this security update?

  Thank you

  JohnD

  Hello @jpd_az,

  I read your post about how you're looking to update your system BIOS and what version of the software to install. I'd be happy to help you in this case!

  The version of the BIOS, you want to download and install is 80.23 A, which can be downloaded by clicking on the link below:

  • Update BIOS HP Compaq consumer desktop PC (SSID family ROM 2AF3)

  To update this software, I recommend that you follow the steps described in this document on the updates to the BIOS.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• HP ENVY spectrum XT impossible to install the BIOS update (processors intel)

  The name of the product of my laptop is HP ENVY spectrum XT and it runs on Windows 7 Home Premium 64-bit and its serial number is CND2340MHX, a notification came in the Wizard support for hp advising me on the BIOS update, when I click on the download and install it downloads the installation file but does not install it and when I checked the action record States that it is impossible to install. Is there a reason to fail?

  Hello Moodster1994,

  Please take a look at this document, which provides for the restoration of your BIOS troubleshooting steps.  Please let me know if this helps solve your problem.

  Good luck!