HP ENVY Sleekbook 6-1110us: Memory Upgrade - vs 1333 MHz 1600 MHz

Similar Questions

• Pavilion Sleekbook 15-B142DX memory upgrade

  Hello, I recently bought and installed an upgrade of DDR3 4 GB memory for my Pavilion Sleekbook 15-B142DX. It is PNY PC3-10666, chip of 4GB which says it's compatible with 1333 MHz and 1066 MHz I booted the laptop after the installation of the new chip, but reports still 4 GB of physical memory, msinfo and other online tests. Yet once, I opened the computer suspect that the chip was not fully connected. While there, I pass the tasks of the 1st round and the new stick. The computer registers yet only 4 GB of physical memory. Did I buy an incompatible chip or it's probably another problem?

  Thanks in advance.

  Hi Paul,.

  I received a HP technical support solution. The chipset you recommended works very well (thanks again). Here is the solution, in case anyone has the same problem with this model:

  (1) I removed the new chipset

  (2) I started the computer and went to menu BIOS setup > Boot Options > Secure Boot (those may not be the exact names)

  (3) switched start safe for people with reduced mobility.

  (4) reinstalled the new chipset

  (5) on the machine

  (6) checked to make sure that the computer record 8 GB

  (7) turned Secure Boot on

  Ensure that the computer has saved 8 GB 8) Made

• HP Envy M6-W105dx: Ram memory upgrade?

  Hello... I'm a big fan of commodity computers HP laptops and desktops... I work with a lot of graphics desinges and this laptop met my needs for the work I do... I just bought a HP Envy M6-w105dx computer windows laptop 10-64 bit with 8 GB of RAM... What is the max Ram upgrade memory? I tried a search and could not find anywhere on the sheet of HP... Please advice... Thank you..

  @LadyShadowKnigh

  Memory	Two SODIMM - not accessible customer locations / not upgradable Twin DDR3L-1600 memory support Supports up to 16 GB of RAM in the following configurations: 16384 MB total system memory (8192 × 2) 12288 MB total system memory (8192 × 1) + (4096 × 1) 8192 MB total system memory (8192 × 1.) or (4096 x 2) Total system memory of 4096 MB (4096 × 1.) or (2048 x 2)

  The problem is that the motherboard has to be removed to upgrade.

  Your Service Guide here.

  http://support.HP.com/us-en/product/HP-envy-x360-M6-Convertible-PC-series/8499296/model/8901596/manuals

  REO

• B200 M3 memory stuck at 1333 MHz in performance mode

  Hello

  We have 2 B200 M3s in a new deployment running 2.0(3a). The B200s are configured with 64 GB using DIMMs of 8 GB, using BANK 0 of each channel. We deployed a policy of BIOS specifying performance for LV DDR mode and confirmed this setting takes effect in the BIOS, but the memory continues to run at 1333 MHz. When we look at the inventory server, the DIMMs are reported as 8GB 1600 MHz DIMM dual rank. We tried forcing the DIMMs in mode low voltage and return to the mode of performance without result.

  In other UCS environments, we have deployed these same blades with the same configuration of the memory and BIOS policy and had no problem getting the RAM at full speed. We do not use any kind of power is corking.

  Thoughts?

  Hi Brad,

  What is CPU?  support for the B200-M3 CPU 3 do not support the 1600 Mhz:

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/HW/chassis/install/B200M3.html#wp1028500

  Mike

• HP Envy m7-k211dx: video memory upgrade 2-4 form.

  Hello I have a HP Envy m7-k211dx with NVIDIA GeForce 840 M with 2 GB of video memory card how I upgraded to 4096MB?

  You don't you can't and it would not help if you could. However, offered on the m7-k200 series was a GeForce 850 M with 4 GB of video memory. The graphics chips are soldered directly to the motherboard, so theoretically you can get the motherboard of 850M and exchange for your.

  Here is the Service Manual:

  Manual

  The motherboards in this range of products also include a processor soldered onto your best motherboard would be this:

  Intel Core i7-4720HQ Discrete 850 M 4 GB (2.6 GHz, turbo up to 3.6 GHz SC), 1 600 MHz/6 MB L3, quad core 47 W for use with the operating system Standard of 782621-501

  HP is out of stock on the motherboard, but you might be able to find online. I expect to cost more than $400, maybe a little more.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ENVY 15-k008ne: Ram memory upgrade

  Hi guys.

  I want to improve my ram from 8 GB to 16 GB.

  I have a HP ENVY 15 - k008ne Notebook PC (J8E89EA), after checking my info memory I found this:

  Here is the Service Manual:

  Your manual

  SODIMM two slots in the brackets support DDR3L - 1600 MHz Dual Channel up to 16 GB of RAM in the following configurations:

  So yes, you can install a 2nd module of 8 GB for a total of 16 concerts.

  Memory module (PC3L, 12800, 1600 MHz, shared): 8 GB 693374-005

  https://www.Amazon.com/Kingston-Technology-1600MHz-PC3-12800-KVR16LS11/DP/B00CQ35HBQ/ref=sr_1_1?ie=UTF8 & qid = 1474550541 & SR = 8-1 & Keywords = 693374-005

  See p. 72 of the manual for 'how-to '. Sorry to say, it of a very difficult job and takes of removal of the motherboard. And it's not supposed to be done by anyone other than an authorized by HP. If you are no longer under warranty it is much less a problem but be careful here, please.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ENVY 15 X 360 MEMORY Upgrade - worst computer ever

  I'll start by telling the truth on this computer. This is BY FAR THE WORST computer I've ever had in MY LIFE.

  Since the first day I bought it, problems with the computer is SLOW, which by the way, I have LET DOWN and continues to use it as a PREHISTORIC laptop slow as hell... and then problems with the SOUND and the SUPPORT AREA IN HP always replying "fix it getting support from other users." LOL it's so bad.

  I'm this close to throwing the garbage where it belongs in THE TRASH. I'll try one MORE thing before I spend a RT of Windows or MAC APPLE ALWAYS BEST yet.

  = tell me MEMORY can I add to this LOSER PORTABLE. until I throw this piece of junk to the TRASH.

  -Product number: G6T84UA #ABA

  -windows 10

  Best regards

  LOL this is so funny. So between the lines you want to say that it IS TRASH AND NOT EVEN 16 concerts will make it BETTER, not true?

  I'll sell this piece of garbage and GO BACK FOR Mac.

  Thank you for your kind reply.

• HP G62-a20SE Memory Upgrade

  Hello

  Im confused here about that is the maximum memory could be?

  Based on the hp site it says Max Memory: supports up to 4 GB memory DDR3, but im looking on the internet, they also said that it can be improved up to 8 GB.

  
  I want to buy 8 GB memory to improve my loptop performance but I don't know if the 8 GB is compatible with my laptop.

  Can someone give me an idea of expertise.

  Thank you

  You are the very welcome.

  The manual is for number of processors, see the top of page 1.

  i5 i3 and an i7...

  And when you go to the page of Intel specs for the processor installed in your model, you will see that the processor supports up to 8 GB memory.

  http://Ark.Intel.com/products/43529/Intel-Core-i3-350M-processor-3M-cache-2_26-GHz?q=i3-350M

  Now, keep in mind that if you buy memory PC3-10600 (1333 MHz), it will only work at 1 066 MHz because it is the speed of the FSB of the processor in your PC.

• HP ENVY Sleekbook 4-1000en: upgrading memory on ENVY 4-1000en

  Hello

  Since I have some basic computer knowledge, but I want to be sure before you go for it, I need your advice.

  I have a HP ENVY Sleekbook 4-1000en and I have recently upgraded to HDD and the OS.

  I think the upgrade of RAM have, as far as I know that you need 2 memories of the same type, so I guess I can't buy an another 4 GB right?

  Do I need 2 x 4 GB of DDR3 memory, of the same type to make it work? For example they would work very well

  http://www.corsair.com/en/vengeance-8gb-high-performance-sodimm-memory-upgrade-kit-cmsx8gx3m2a1600c9 ?

  Finally the upgrade memory requires any other configuration after plugin in? Is a format for example?

  Thanks for your time.

  Hello

  The following link shows the specifications of your computer:

  http://support.HP.com/us-en/document/c03362810

  It has 4 GB of RAM now. The question is 4 GB in a dwelling or in the two slots (2 + 2).

  b in the case of a home, you can just buy another 4GB with SAME part/characteristics of the EXISTING RAM and install in the second slot.

  (b) if in 2 slots (IE 2 + 2), then throw them both and buy 2 new sticks 4 GB each. Agin use even care.

  You don't need to format RAM. Moreover, we have only to format HDD/SSD but not RAM. And Yes, push in the two slots must be same same specs even marks to be able to get all the benefits.

  Kind regards.

• HP ENVY Notebook m6-1105dx: question to DDR3L DDR3 memory upgrade

  I have a laptop of HP ENVY m6-1105dx.

  I would like to upgrade from 1.5V to DDR3L 1.35v DDR3.

  Is this possible without damage to my laptop?

  Thank you

  Joan

  The upgrades only to memory that can be made to your laptop is installation of memory modules that are guaranteed compatible by a manufacturer of memory.

  Your laptop is not like a mother gaming for a desktop computer. You are limited to the settings "protect me from myself" available in your BIOS. You cannot change the tension of memory to allow the motherboard to accept other modules of memory. Installation of memory with others that the specifications published by HP or other than guaranteed compatible memory modules will probably reward you with no experience to have fun a non laptop startup.

  That said, I recommend you do a search on google for HP ENVY m6-1105dx memory upgrade. Stick with well-known brands to avoid surprises.

• Update of HP ENVY Sleekbook 4 - 1047tx of ram 1600 MHz DDR3 at 1333 MHz

  Nice day!

  I have a HP ENVY Sleekbook 4-1047tx (click for form) and I want to upgrade the RAM 8 GB, as you can see current memory is 4 GB of DDR3 memory at 1600 MHz... Can I use 4 GB DD3 1333 MHz on it? Is it safe? What could be the long term effect?

  franzkie93 wrote:

  Nice day!

  I have a HP ENVY Sleekbook 4-1047tx (click for form) and I want to upgrade the RAM 8 GB, as you can see current memory is 4 GB of DDR3 memory at 1600 MHz... Can I use 4 GB DD3 1333 MHz on it? Is it safe? What could be the long term effect?

  As a general rule, long term, its not recommended to mix different frequencies & CASE, RAM together.

  But if you ask if they work together at all, they will all be two race to lower speed - no problem whatsoever in this area.

  Fortunately, your system manual lists the frequencies 1600 times & 1333 & if you put two Rams they will work in single channel type - no dual channel supports listed in the guide.  Here is your Manual (Page 1).

  The performance issue that could have landed because they are different, it's that they are running in single channel which is slower mode. But your system do not already support channel.

  So all of your ram is now 1333 but it will work very well in single channel mode.

  Download CPU - Z to see what makes your ram and ram it is. The part listed for 4 GB of RAM is in your manual.

• Is it possible to install the backlit keyboard on HP Envy Sleekbook 1014nr?

  HP Envy Sleekbook 1014nr

  Windows 8

  I want to upgrade my laptop with a backlit keyboard over there. Either by myself or send to hp to install. What would be the cost for both options?

  Thank you.

  teeunitedstates wrote:
  

  I looked online for the spare wheel part number is 687099-001 for the black backlit keyboard. Only problem is that I can't. Even on Hp PartSurfer. If you happen to find it please, bind it to me! I looked on Ebay anything.

  Thank you

  It takes a while when spare parts are available for laptops new or recent. I found a renovated on www.com-com.co.uk.

• HP ENVY Sleekbook 6-1058er: HP ENVY Sleekbook 6-1058er - 10 windows drivers

  Hello!

  I had windows installed 10 (64-bit) on my HP ENVY Sleekbook 6-1058er, but as I see windows does not provide the complete set of drivers (it does not find driver chipset until what I install).
  also I cannot find drivers on the site of HP http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-6-Sleekbook/5269347/model/5276483
  It says "drivers Windows 10 may be available via Windows Update"

  Could someone tell where I can download the drivers?

  Thank you in advance!

  Hi @evgdobr,

  Welcome to the HP Forum!

  It is a wonderful location to converse with the community, get help and advice. You have a rewarding experience, I would include the following link for your perusal and reference.  First time here? Learn how to publish and more

  I understand that you upgraded to window 10 and when you checked the page software and drivers for your laptop, you have discovered that HP did not provide drivers and they may or may not be available through Windows update.   Here is a link to products HP - where can I find drivers Windows 10 and software for my model? to help you acquire drivers.

  HP has not tested Windows 10 on your model of laptop, so does not supply the drivers. At any point before moving on to Windows 10?   HP Notebook PC - upgrade to Windows 10.

  This is a great question other clients may also wonder; Please click the "accept as Solution"   if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ""Thumbs Up '   below! "

• Pavilion Elite HPE-170f Deskto: Memory Upgrade

  I have the HP Pavilion Elite HPE-170f desktop.

  Motherboard: Pegatron IPMTB-TK (Truckee)

  Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

  Storage media: 6 x DDR3

  Memory type: Types DIMM PC3-8500 (DDR3-1066)

  I currently have 8 GB of memory.

  What is the maximum I can install?

  Operating system: win 10 Pro 64-bit

  Thank you

  John

  @jmwright1058

  Memory upgrade information

  • Architecture memory triple channel

  • Six DIMM DDR3 240-pin connectors

  • Supports types DIMM PC3-8500 (DDR3-1066)

  • Memory non - ECC, unbuffered

  • Supports DIMM DDR3 4 GB modules

  • Supports up to 24 GB on 64 bit computers

  • Supports up to 4 GB * on 32-bit computers

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301