HP Extended capabilities 4.7

Similar Questions

• Difference between signal y express sound and Vibration Assistant

  Buenas,

  Cuando instalas el of sound and vibration luego software, tienes back ejecutables: Sound and vibration assistant y signal on purpose. Los abres los back if you lo lo mismo. Mid questions are:

  • What difference between hay?
  
  
  • Da igual use uno u otro
  
  
  • If desinstalo uno los pasa algo back?

  MUCHAS gracias

  Saludos

  Hola, aaramburu,

  in lenguaje andar por casa, Signal Express are el programa matriz y S & VA el are UN modulo what instala encima y reviews una paleta Programación than permite usar funcionalidades specific sonido Análisis y constant. El Signal Express has leaves, apply filters, a configurable software para datos closing, etc. If el S & VA mallards are mallards nuevas funcionalidades enable use tarjetas para señales dinamicas o DSAS that enable leer of tacometros, acelerometros, hacer análisis octavas, etc.. ES como if instalas LabVIEW, are UN lenguaje general Programación y quieres una camara use. Sober el propio LabVIEW has instalar Modulo de Vision para el LabVIEW y is anaden kbes imagen aforementioned funcionalidades.

  No nada desinstales, one extended capabilities. As has using uno u otro, depends on the nature of the application as desarrolles. If going to a Signal Express y seleccionas help > Getting Started with > Getting Started with LabVIEW Signal Express Fiesta el tutorial Básico para el manejo del entorno con guiados exercise. Leads unas cuatro horas. If you want to develop una application of sonido y vibration, using a high port tal y como is muestra in el tutorial help > Getting Started with > Assistant Sound and Vibration.

  I hope this information you follows from utility.

  Jesus.

• IviDCPwr class driver

  The IviDCPwr class driver is not WriteInstrData or ReadInstrData functions.  These functions are needed to be able to send a command and read data that were not written in the driver.  If a DC power supply has a function that is not in the class IviDCPwr, you could use these commands to perform this function and I must still call a driver.

  Hello Paul,

  Class IVI drivers only implement the basic and Extended Capabilities class, allowing interchangeability.  Writing or reading data specific Instrument adversely influence interchangeability, so therefore, they are not applied at the class level.  You will need to get a reference to the specific instrument IVI Driver and call the Instrument specific WriteInstrData or ReadInstrData.  In LabVIEW that implicitly when you initialize with the driver class and then wire the reference to the specific driver VI.

  In CVI, you will need to call "IviDCPwr_GetSpecificDriverCHandle" which "...". Returns the session instrument handle C allows you to call functions of the specific driver. »

  See you soon,.

  NathanT

  p.s. This is a search of ni.com for "WriteInstrData" gave (see the best result).

• Extend the network wireless with roaming function

  Hello

  I was looking for some advice on my project to the top. I currently have my SKY router (wifi off) connected to an older time capsule which is almost full, so I'm about to buy a new one and I can use the old one plus one new airport extreme/express to extend the network of thought. I think three points would be best as its quite a large sector, I wish to address. I would like that it either under one SSID using the roaming capabilities I've read are possible with the airports and would hand off a signal strong etc.

  Unfortunately, I don't have the option of it being fully wired but planned to use the powerline rather than wifi adapters because I don't want to lose too much speed. I use power lines now an extension of netgear and performance are pretty good with very little loss, although the multiple SSID bothers me so want to change.

  Can someone advise if the setting above would work or if there is a better way (without cabling package together) and if I would be best for extreme or the express for the 3rd point?

  If anyone has any configuration Advisor if this is the best set up then that would be also appreciated?

  Thank you very much

  Iain

  I use power lines now an extension of netgear and performance are pretty good with very little loss, although the multiple SSID bothers me so want to change.

  Configure each extension to use the exact same network name (SSID), the same level of security wireless and same password wireless. Then you will have a roaming network.

• Acrobat Pro Extended is available as an add-on or upgrade?

  I have Acrobat 9 Pro and I need the extended features to create forms.  Is there an add-on or upgrade?

  If you are looking for 3D capabilities offered Acrobat 9 Pro Extended, then they are offered by a third party partner Adobe: tetra4D - the source of 3D PDF

• program error when try to apply extended Photoshop CS5 extended 3D?

  Help, please! Cannot use pushed 3D Photoshop CS5 Extended (my system information is described below)

  I have tried almost everything that is available in the Adobe Library help, also resettled such programs as requested by Adobe support (suspected of getting rid of me), it has not resolved the problem.

  I used to have 3D capabilities and also crop tool has worked well before (now it changes all layers when using cultures even in the background).  My PC is the same, nor have I downloaded plugins or change video cards (these things are too advanced for me!), also restored preferences many times.

  My system makes automatic updates, revised graphics and adobe such as recommended.

  Settings OpenGL is weird... .only access basis, other modes are not put into evidence (normal or advanced).

  ERRORS (for 3D text)

  1. "your 3D scene now exceeds the limits of enlightenment or textures for a 3D hardware acceleration in the video card rendering. As long as the limits are exceeded, rendered 3D will be in the software only, and certain features (for example, postponed) will be disabled. »

  2. «your video card does not meet the requirements for hardware-accelerated 3D rendering.» "All the 3D will be returned with only the software.

  3 "" could not complete the text layer command because of a program error ' "

  ERROR (by object)

  Open GL/GPU HARDWARE ACCELERATION IS CURRENTLY DISABLED. 3D IS NOW RENDERED WITH SOFTWARE ONLY.  TO ENABLE the ACCELERATION OPEN/GL, GO IN PREFERENCES > PERFORMANCE TAB AND CHECK THE 'ENABLE OPENGL GRAWING' CHECK box.

  Is it possible that I have a GPU sniffer? all these words I've learned recently =) but I have a healthy chart & capable card and accepted by the adobe standards.

  INFORMATION SYSTEM

  Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch]) x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: Intel CPU Family: 6, model: 5, Stepping: 2 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2 FP

  Physical processor count: 4

  Processor speed: 2128 MHz

  Built-in memory: 3895 MB

  Free memory: 2210 MB

  Memory available to Photoshop: 3280 MB

  Memory used by Photoshop: 70%

  Tile image size: 128K

  Image cache level: 4

  OpenGL drawing: enabled.

  OpenGL drawing mode: basic

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: fake.

  OpenGL Crash file: not detected.

  OpenGL allows old GPU: not detected.

  The video card vendor: Intel

  Renderer video card: Intel(r) Graphics Media Accelerator HD

  Display: 1

  View the limits: = top: 0, left: 0, bottom: 768, right: 1360

  Video card: 1

  Graphics card: Intel (r) Graphics Media Accelerator HD

  Driver version: 8.15.10.1968

  Driver date: 20091008000000.000000 - 000

  Video card driver: igdumd64.dll, igd10umd64.dll, igdumdx32 igd10umd32

  Video mode: 1360 x 768 x 4294967296 colors

  Legend of the video card: Intel(r) Graphics Media Accelerator HD

  Video card memory: 1723 MB

  Serial number:

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64-bit).

  Temporary file path: C:\Users\Patricia\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  C:\, 284.6 G, 218.5 free G

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit) \Plug-ins\

  Additional Plug-ins folder: not defined

  Installed components:

  A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library

  ACE.dll ACE 2010/12/13-23: 37:10 64,449933 64.449933

  adbeape.dll Adobe EPA 2011/01/17-12: 03:36 64,452786 64.452786

  AdobeLinguistic.dll Adobe linguistic Library 5.0.0

  AdobeOwl.dll Adobe Owl-2010/06/03-13: 43:23 3.0.93 61.433187

  AdobeOwlCanvas.dll nice Adobe Web 3.0.68 61.2954

  AdobePDFL.dll PDFL-2010/12/13-23: 37:10 64,341419 64.341419

  Adobe AdobePIP.dll 5.5.0.1265 product improvement program

  AdobeXMP.dll Adobe XMP Core 5.0 64.140949

  AdobeXMPFiles.dll Adobe XMP files 5.0 64.140949

  AdobeXMPScript.dll Adobe XMP Script 5.0 64.140949

  adobe_caps.dll Adobe CAPS 4,0,42,0

  adobe_OOBE_Launcher.dll Adobe OOBE Launcher 2.0.0.36 (BuildVersion: 2.0;) Brand: Monday 24 January 2011 21:49) 1.000000

  AFlame.dll in flames 2011/01/10-23: 33: 35 64,444140 64.444140

  AFlamingo.dll AFlamingo 2011/01/10-23: 33: 35 64,436825 64.436825

  AGM.dll AGM 2010/12/13-23: 37:10 64,449933 64.449933

  ahclient.dll AdobeHelp Dynamic Link Library 1,6,0,20

  aif_core.dll AIF 2.0 53.422628

  aif_ogl.dll AIF 2.0 53.422628

  Amtlib.dll AMTLib (64-bit) 4.0.0.21 (BuildVersion: 4.0;) Brand: Monday 24 January 2011 21:49) 1.000000

  amtservices.dll AMTServices (64-bit) 4.0.0.21 (BuildVersion: 4.0;) Brand: Monday 24 January 2011 21:49) 1.000000

  ARE.dll ARE 2010/12/13-23: 37:10 64,449933 64.449933

  asneu.dll AsnEndUser Dynamic Link Library 1, 7, 0, 1

  Axe8sharedexpat.dll AXE8SharedExpat 2011/01/10-23: 33: 35 64,436825 64.436825

  AXEDOMCore.dll AXEDOMCore 2011/01/10-23: 33: 35 64,436825 64.436825

  Bib.dll BIB-2010/12/13-23: 37:10 64,449933 64.449933

  BIBUtils.dll BIBUtils 2010/12/13-23: 37:10 64,449933 64.449933

  boost_threads.dll product DVA 5.0.0

  CG.dll NVIDIA Cg Runtime 2.0.0015

  cgGL.dll NVIDIA Cg Runtime 2.0.0015

  CoolType.dll CoolType-2010/12/13-23: 37:10 64,449933 64.449933

  data_flow.dll AIF 2.0 53.422628

  dvaadameve.dll product DVA 5.0.0

  dvacore.dll product DVA 5.0.0

  dvaui.dll product DVA 5.0.0

  ExtendScript.dll ExtendScript 2011/01/17-17: 14: 10 61,452840 61.452840

  FileInfo.dll Adobe XMP FileInfo 5.0 64.140949

  icucnv36.dll International Components for Unicode Build gtlib_main.9896 2009/06/17-13: 21:03

  icudt36.dll International Components for Unicode Build gtlib_main.9896 2009/06/17-13: 21:03

  image_flow.dll AIF 2.0 53.422628

  image_runtime.dll AIF 2.0 53.422628

  JP2KLib.dll JP2KLib 2010/12/13-23: 37:10 64,181312 64.181312

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 10.0

  LogSession.dll LogSession 2.1.2.1263

  MPS.dll MPS-2010/12/13-23: 37:10 64,450375 64.450375

  msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.4940

  msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.6161

  msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.4940

  MSVCP90.dll Microsoft® Visual Studio® 2008 9.00.30729.6161

  MSVCR80.dll Microsoft® Visual Studio® 2005 8.00.50727.4940

  Msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.6161

  pdfsettings.dll Adobe PDFSettings 1.04

  Photoshop.dll Adobe Photoshop CS5.1 CS5.1

  Adobe Photoshop CS5 CS5 plugin.dll

  PlugPlug.dll Adobe CSXS branchezBranchez Dll Standard (64 bit) 2.5.0.232

  PSArt.dll Adobe Photoshop CS5.1 CS5.1

  PSViews.dll Adobe Photoshop CS5.1 CS5.1

  SCCore.dll ScCore 2011/01/17-17: 14: 10 61,452840 61.452840

  Threading Building Blocks 2, 1, 2009 0201 TBB.dll

  TfFontMgr.dll FontMgr 9.3.0.113

  TfKernel.dll kernel 9.3.0.113

  Geom TFKGEOM.dll kernel 9.3.0.113

  Adobe TFUGEOM.dll, UGeom © 9.3.0.113

  updaternotifications.dll library Adobe Updater Notifications 2.0.0.15 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 2.0.0.15

  WRServices.dll WRServices Thursday, January 21, 2010 12:13:3 build 0.11423 0,11423

  U3D writer 9.3.0.113 wu3d.dll

  Plug-ins installed:

  3D Studio 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Accented edges 12.0

  SMA 3.11x01

  Angular Strokes 12.0

  Average 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Bas-relief 12.0

  BMP 12.0.2

  Camera Raw 6.3

  Chalk and charcoal 12.0

  Charcoal 12.0

  Chrome 12.0

  Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  12.1 Collada (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Halftone color 12.0.2

  Color pencil 12.0

  CompuServe GIF 12.0.2

  Pencil tale 12.0

  12.0 crack

  Crop and straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Crop and straighten Photos filter 12.0.2

  Hatch: 12.0

  Crystallize 12.0.2

  Cutting 12.0

  Features dark 12.0

  Deinterlacing 12.0.2

  DICOM 12.0

  Difference clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Glow 12.0

  Move 12.0.2

  Dry brush 12.0

  Eazel acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Embed watermark 4.0

  Entropy 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Extrude 12.0.2

  FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Fiber 12.0.2

  Film Grain 12.0

  Gallery of filters 12.0

  Fresco 12.0

  Glass 12.0

  Scarlet contours 12.0

  Google Earth 4 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Grain 12.0

  Graphic pen 12.0

  Halftone Pattern 12.0

  HDRMergeUI 12.0

  IFF Format 12.0.2

  Outlines in ink 12.0

  JPEG 2000 2.0

  Flattening coefficient 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Blur of the lens 12.0

  Correction of the lens 12.0.2

  Lens Flare 12.0.2

  12.1 lighting effects (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Liquefy 12.0.1

  12.1 running MATLAB (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  12.1 maximum (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Average of 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Measure Core 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  12.1 median (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Mezzotint 12.0.2

  Minimum 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Mosaic tiles 12.0

  12.1 of multiprocessor support (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Neon 12.0

  Paper notes 12.0

  12.1 color NTSC (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Ocean Ripple 12.0

  OpenEXR 12.0.2

  Paint Daubs 12.0

  12.0 palette knife

  Patchwork 12.0

  Paths to Illustrator 12.0.2

  PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Photocopy 12.0

  Engine 3D Photoshop 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Picture Package filter 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Pinch 12.0.2

  Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Plaster 12.0

  Plastic 12,0

  PNG 12.0.2

  Pointillism 12.0.2

  Polar coordinates 12.0.2

  Portable Bit map 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Poster edges 12.0

  Radial blur 12.0.2

  Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Range 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Read watermark 4.0

  Crosslinking 12.0

  Ripple 12.0.2

  Rough Pastels 12.0

  Save for Web and devices 12.0

  ScriptingSupport 12.1

  12.0.2 shear

  Asymmetry 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Smart Blur 12.0.2

  Smudge Stick 12.0

  Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Splash 12.0

  Spherize 12.0.2

  Sponge 12.0

  12.0 sprayed strokes

  Stained glass 12.0

  Stamp 12.0

  12.1 of the standard deviation (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Sumi-e 12.0

  Warning 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Targa 12.0.2

  Texture veneer 12.0

  Tiles 12.0.2

  Torn edges 12.0

  Watch twirl 12.0.2

  12.1 U3D (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Draft 12.0

  Vanishing point 12.0

  12.1 the variance (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  12.1 changes (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Water paper 12.0

  Watercolor of 12.0

  Wave 12.0.2

  Wavefront | 12.1 OBJ (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  12.1 WIA support (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Wind 12.0.2

  Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03 / 28:10:30:00 cutoff; r branch])

  Zig - zag 12.0.2

  Plug-ins that could not load: NONE

  Flash:

  Mini Bridge

  Direct access to CS

  Flash

  Kuler

  CS Review

  Install TWAIN devices: NONE

  Some drivers are inconsistent in their errors.

  Photoshop disables GPU settings if the driver says that it is not able, or if the driver goes down, or if the driver returns errors when it does not.

  But ultimately, the problem is a bug in the driver of your video card, and you must update this old driver to try to pick up all the bug fixes that they did in the last 3 years.

• The Lord of the rings extended editions in iTunes Store

  Do not know where to write this request...

  I'm a fan of long standing of the Lord of the rings and the Hobbit.

  As a fan, I want as much I can, and I have the extended version of the Hobbit.

  But for some reason I can't find the long version of the Lord of the rings, and they give more sense when you read the books.

  Is this really a wish or someone know how to get in iTunes DK/EU?

  I have them on DVD but I have in my store on my ATV.

  You can try to contact the Danish rights to the film holder and ask them to put them in the Danish store. You can also try to asking them through iTunes, but without the agreement of the holder of the rights, Apple will not be able to sell it: http://www.apple.com/feedback/itunes.html

• new operating system mac Sierra would have all the features and capabilities that El Capitan?

  Hi all

  new Sierra mac OS is available for download. My current OS is El Capitan. If I install this Sierra he would have all the features and capabilities El Capitan has?

  As far as I know, they have not eliminated all the features; They added a few however; You can read about them here:

  https://www.Apple.com/MacOS/Sierra/

• Impossible to extend the existing wi - fi with time capsule airport

  Hello

  I have one Capsule of airport TB 2 hung on an Ethernet in my study (lower level).

  I already have an existing wi - fi network to ISP modem/router to my media box provided at the top level.

  In addition, I have an Extender provided by the ISP of lower level.

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  I tried several times to do so, but either it freezes up or creates its own network despite the

  mode bridge as stated in Airport utility.

  Guide gently with the method or Protocol correct to put that in place.

  Thank you

  Jay

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  It sounds like you may try to extend the network of your "main" router wireless

  The time Capsule will not be able to extend wireless network if your 'main' router is also an Apple AirPort base station.  Or... in other words if your 'main' router is not an Apple product, then the time Capsule will not be able to extend wireless network.

  So, the first question to ask here would be... What is the number of brand and model of your router "main"?

  If you intend to leave the time Capsule connected to your main router with an Ethernet connection, the Capsule must have the maximum value of "create a wireless network.  If you use the same wireless network name and password using your 'main' router, Time Capsule will provide additional wireless coverage in the area where it is located.

• Can I use an old station Airport Express to extend your network using a new Airport Express Terminal?

  I had an old Airport Express station and wanted to exchange for a newer version and use the old ones to expand the range in our House. Is this possible?

  By 'old' are you referring to the AirPort Express (model A1084) to 802.11 g? If Yes, then you won't be able to use it to extend the latest Express with a wireless connection between them.

  However, you can use it in a roaming network configuration, which would force base stations to be connected by Ethernet.

• Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

  Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

  Greetings jenniferfrom46,

  From your post, I see that you are unable to make phone calls. I count on the ability to use my phone a lot to make calls, so I can understand your concern. I will be happy to provide you with some information for you.

  If you can not make or receive calls on your iPhone, this article goes on measures to take to help with the issue you are experiencing.

  Have a good!

• AirPort Extreme: extend only 5 GHz network

  I have a Time Capsule 802.11n (4th generation) set up to expand my WiFi network at our show in the stairs.

  The WiFi hotspot, upstairs in my office, is an Airport Extreme 802.11n (5th generation).

  Attached to my TV Sony is a transmitter Brightech DoublePlay HD Bluetooth 4.0, running on the band 2.4 GHz effects seriously communications on my WiFi network (demonstrated unequivocally by the device to the USB port on the TV).

  If I can force time Capsule 802.11n (4th generation) in my living room to expand the WiFi network exclusively on the 5 GHz band.

  I named the Base Station Airport Extreme 802.11n 5 GHz network (5th generation) and have set up time Capsule 802.11n (4th generation) in my living room to expand the 5 GHZ network named (not WiFi Dual Band network) but me uncertain whether time Capsule 802.11n (4th generation) in my living room is locked on the band of 5 GHz. is there a way to check this.

  Appreciate your help, any...

  WiFi performance was dreadful while listening to the sound of movie via Bluetooth head sets, take several hours to be ready to play a movie in iTunes or play will stall and plans several hours to be ready to resume.  If I can lock the time Capsule 802.11n (4th generation) in my living room on the network of WiFi 5 GHz, I think I'll have the trouble of sorting.

  

  

  If I can force time Capsule 802.11n (4th generation) in my living room to expand the WiFi network exclusively on the 5 GHz band.

  Sorry, but no. When you extend an Apple base station, two radio stations are extended.

• Puerto Rico - extended warranty Iphone

  I live in PR, and I am a current iphone owner.  I think the upgrade of my phone with the 7plus and the extended warranty, but it seems that the extended warranty is a no coverage in PR someone could clarify this for me?  Of care review + the terms and conditions of apple, it's not clear to me if there is a PR coverage or if there is a service provider for only this warranty in PR

  Where you see that there is no coverage in Puerto Rico?

  -What were you looking at this page? http://www.Apple.com/legal/warranty/products/iOS-warranty-ALAC-Spanish.html

  English: https://translate.google.com/translate?sl=auto & tl = in & js = y & prev = _t & hl = in & ie = UTF-8 & u = http % 3A % 2F % www.apple.com%2Flegal%2Fwarranty%2Fproducts%2Fios-warranty-alac-spanish.html 2F & edit-text = & act = url

• WDS Airport Roaming vs vs Extended Network

  Hello friends,

  In a roaming network, all airports have the same wireless network name and wireless security settings. If I'm not mistaken in WDS also the same rule should be followed. Is also applicable to a network of Airport Extreme Extended (1 main base station connected to a broader base station)?

  If this is the case then a user can move freely between these extremes of the airport with the same user name and password in any scenario 3. So what is the difference besides the AEs interconnected via ethernet and wireless in 3 different topology?

  Thank you.

  In a roaming network, all airports have the same wireless network name and wireless security settings. If I'm not mistaken in WDS also the same rule should be followed.

  It is basically correct. Routers for Apple, there are three types of networks "scopes": 1) expanded that using wireless connections between fixed stations, 2) Roaming using connections between base stations, & 3) Wireless Distribution System (WDS) wired. WDS uses also all wireless connections.

  The first two replaced WDS that was designed to be used only with the old base station 802.11 g. He has a major advantage. You can extend a network in a series as employed the use of a "main", "relay", and "distance" base stations. This feature is not embedded with the new models, elongated or Roaming.

  Is also applicable to a network of Airport Extreme Extended (1 main base station connected to a broader base station)?

  For the most part, Yes. The extended base station that's exactly right and the extension of the primary Wi - Fi network. So it would have the same network name and use the same type of security and password.

  If this is the case then a user can move freely between these extremes of the airport with the same user name and password in any scenario 3. So what is the difference besides the AEs interconnected via ethernet and wireless in 3 different topology?

  The main difference is overall performance of bandwidth of a Wi - Fi. Maintaining an extensive network using wireless connections only requires treatment of additional network traffic. This overload can reduce the bandwidth available to normal wireless traffic. This problem does not exist with a roaming network.

  The other problem with a network extended wireless all is loss of bandwidth. Each added to the extended network, base station reduces overall bandwidth almost in half. Again, this is not a problem with the network of mobile type.

  Finally, with a network extended wireless all base stations which extend to extend the hand to the same bandwidth it receives from the hand to this place. So the wireless clients connected to one of the extension of base stations will produce ever and when then are connected to the main.

• How to reconfigure wireless network extended with several base stations

  I have a wifi network in an Airport Extreme wired to the modem from our Internet service provider and an Airport Express Terminal extended wireless in another part of the House. I recently added a second Airport Extreme (also extended wireless) to boost coverage in another area of the House. I want to have the Express and the extreme second each wireless connection directly to the base station to the modem to have the shortest path to the main base station, but the Airport utility network diagram seems to keep showing the network of linearly (main Extreme base - second extreme - Express). So, two questions: first, represents the schema of utility Airport the signal path real (linear Express by Extreme II, then to Extreme II/modem)?  And secondly, if so, how to reconfigure the network to have both Express and Extreme II forking the extreme base I directly, rather than having the food by Extreme II, then Extreme I Express. The network showed that the desired branched network yesterday, but today went back into the linear trajectory. I tried a simple drag and drop graphic to move the Express, thinking that surely the Apple would implement such a simple, logical and direct way to manage the network, but no. Have not seen another way to configure the network manually, so any suggestions would be appreciated.

  It is very important to understand that Apple "extend a wireless network" works on signal strength.

  In order to have the AirPort Express and AirPort Extreme to extend the network of the 'main' extreme wireless, two conditions must be fulfilled:

  (1) the AirPort Express and AirPort Extreme extension should both be on the same relative distance of the extreme 'main '.

  (2) AirPort Express and AirPort Extreme extension must both be closer to the extreme 'main' they are to each other.

  In other words, a well put together would have your "main" AirPort Extreme in the middle of the House, with a Terminal AirPort Express on one end of the House and the AirPort Extreme to the other end of the House.  In this configuration, the two airports are about the same distance from the extreme 'main'... and... "" oth extending airports are located more close to the "main" airport that they are with each other.